I have a 2003 TJ with 140,000 miles. It is a manual transmission. I do several off roading trips a year. It is my daily driver. Other than having a limb go through my radiator, no mechanical issues at all. Never experienced death wobble, nor have I done anything to avoid it. I will never sell my Jeep.
@@efs83dws your track bar bushing will wallow out and allow side to side play. Its happened to all 3 of my TJ's. If you do ever develop death wobble the easy thing to do to fix it, go on ebay get a full bushing kit for 250. Replace your control arm bushings, track bar front and rear along with the say bar bushings them throw a new stabilizer on there. The ride is day and night different. Also of you have a "dead" spot on your steering wheel when turning or driving that is tie rods and drag link issues, you can also look up the "cure" its a metal bushing that connects the tie rod to the drag line to help prevent roll from a worn out joint. Hopefully you never need to do any of it but i know on my 98, 03 and 04 they all needed it.
Reliable is a relative word. TJs are very reliable for the engine and transmission, but even the staunchest Jeep defenders will admit the check engine light is on far, far too often compared to something well built like a Toyota. Love my TJ, but reliability is not one it's perks unless you are referring tot eh drive train. And Jeeps are loud AF, that is just the nature of the beast. Know your limitations and you will be happy.
I bought my first 06 TJ at 63K miles and when I turned 18. Fast forward 10 years later, it's still chugging along at 170K miles. Definitely keeping it for life.
Wranglers aren't what gave Jeep the unreliable reputation. It's the numerous electrical problems on the Grand Cherokee and all the dumb gadgets they'd throw on them.
It's not bad reliability that gave US cars a bad reputation, it's the piss poor materials used in the interior and build quality coupled with garbage fuel economy. Ford Taurus, crown victoria were all very reliable, probably just as reliable as toyotas. Let's face it, if the interior of a TJ wrangler was in a sedan, it would be unacceptable haha.
I’ve had a 97 TJ for 10 years it’s the most reliable automobile I have ever had. I have a new aftermarket soft top which is thicker than my factory top it fits better and is quieter. I’m also running 32’s with a 4 inch lift and although it’s a bit more a struggle on steep hills on flat on gradual inclines even with 3.07 gears it still really goes, there is a slight decline in acceleration but it’s very little and doesn’t affect my ability to pass other vehicles quickly if I have to. It runs straight but I do feel holes in the road but it’s no different with the lift as it was factory, I love my TJ.
I agree with you.... I drive a 2018 JK w 35 with lift, and it runs perfect I've been driven on 80 and 90 miles per hour and runs perfect, like you said if you do erratic driving or it is windy you might have some issues but winds give issues to mostly every car
I love the chats about the TJ. Love my TJ 4.0. Never getting rid of it. Was cleaning out the interior of my frame tonight. Never ending battle. But I wont give up the fight. Yes! Wind is not fun in the TJ. I was pulling a small trailer and was being pushed around. Little sketch but I made it safe and sound. Thanks for the videos brother!
yeah iv had my TJ for 13 years and it has a little engine noise but its a daily driver and still runs great. soft top is a bit loud but not much more than the hard top i had in a earlier jeep. i love my TJ though!
Another huge contribution to death wobble is alignment, especially caster. On another note, I don’t know how or where you found a tj with 9k miles, but that’s amazing!
I really enjoy your channel. I bought an 05 Jeep TJ with straight six and six speeds. I didn't know it had AC until I saw a leak under the engine and realized it was condensation from the AC condenser, which I was happy to discover. I am inspired by your videos and am having fun customizing our Jeep. Thanks....
The TJ wheelbase is about the same as the YJ and CJ7. The track width isn't very different either. The YJ and TJ use axles of the same width. The CJ7 used narrower axles, but rim backspacing and tire width may have made up a bit of the difference. CJ springmounts were more inboard than on the YJ, but this may have aided articulation. TJs have front and rear anti-swaybars. YJs and CJ7s only have a front anti-swaybar. CJs had no trackbars, and didn't need them. YJs had them, but didn't need them. Live-axle coilsprung Jeeps should have triangulated upper linkage, IMO. Trackbars are BS engineering for Quadracoil. They are prone to deathwobble, bumpsteer, etc. Leafsprung Jeeps had live axles and trackbars were unnecessary. My CJs and YJ never wobbled, even without any trackbars. 2dr SWB Wranglers are still more prone to rolling than most passenger cars. The COG is higher and the wheelbase is shorter. Cars like Corvettes also have downforce, a very wide trackwidth, and STIFF anti-swaybars, so they are very stable during cornering. This isn't to say that Wranglers are unsafe. Just don't try to drive them like a sportscar.
For death wobble, check the front track bar bushing. Have someone turn the steering wheel while you look at the attachment point of the track bar to the frame. Do this carefully with the vehicle in park and the engine running. If there is a lot of play, the bushing is bad. Replace the track bar.
Hey, I’ve been taking notes, your jeep is exactly my jeep when i was kid . Anyway, Injust copped one, I pushed 80pmh plus, no death wobbles driving all the way from New Hampshire. I love it. I have an 02, 4.0, got it for 2k. Just needed a crank shaft position sensor and some rust work done to the frames. After, I will come back for some mods ideas and stuffs. Beautiful Jeep.
I have an 05 with an automatic transmission. I was having issues with shutter on takeoff. WranglerFix fixed everything I was having an issue with in the stock PCM. I’m running Netto Mud Grapplers 33-13.5-15 and it has a 2 inch lift. I replaced the rear 35 with a Dana 44 and installed an E Locker with 4:56 ring and pinion. I put a Power Trax Lock Right in the front Dana 30. I live in the Sierra Nevada mountains, and my Jeep gets me everywhere I want to go. I spend a lot of time in the Sequoia National Forest because I live here, and my TJ has been the perfect trail rig. It turns on a dime, and the 4.0 has all the torque I need to get up and down these mountain roads without any issues.
I have a 06 jeep wrangler se 4.0 automatic with the stock daina 34 back and 30 front with stock gears on a 4 inch lift with 35's grabber x3 tires and it runs great! I also have a superchip installed running in tow mode and it still has a lot of power I live in hawaii and it's a perfect island vehicle.
I drive 95 Yj four banger,leaf spring suspension,its lifted around 2 inches front and with heavy duty shackles and 2 and !/2 inch springs in the rear, I removed the front sway bar and the rear pan hard rod, the front has caster wedges. When I bought the jeep the previous owners had the axles under the springs, to raise it, and it was all screwed up,gear ratio,s are 375 with 29 inch tires,my issue is ,I have plenty of low end torque but I have never been able to hit 5000 rpm I had the computer reflashed with an emission delete, this jeep has no converter but still has the sensor, the engine was rebuilt at some point ( rtv) on the pan, oil pressure cold is 65 lbs, then drops to 25 after its warmed up, at idle but stays at 60 when your on the highway (compression is 160) they only thing I did was replace the timing gears and chain, I do all the repairs and maintenance myself,im 67 and have worked on foreign cars most of my life, but this thing is a blast, in the summer the roof and doors come off, and I dont have to worry about rain because there is no carpets on the floor pans, after blasting in the mud, I just remove the drain plugs on the floor,put a garbage bag over the one seat, and hit the car wash ( I remove the passenger seat so I can stuff my kayak in it
Wyatt Flamont oh yeah i like yours! metal cloak fenders too i see, nice nice. i have a black one as well. 98... not as many upgrades as you yet tho haha, soon hopefully
My old tj was tippy past 60. Broke down constantly and my soft top was so loud you couldn't hear anything while driving. But man was it fun to drive. Terrible on the highway okay to put around town. But amazing offroad
Good vid to dispel these unfounded myths .A lot of people that had to sell there Tjs had regrets of selling them Im going to keep mine as long as i can.
As a Jeep owner myself, I agree with you. I have owned 14 Jeeps in my life. Presently, I own a 98 TJ Sport, 88 YJ Sahara, and a 45 Willy's MB. Jeeps are fun and have to be taken care of properly.
You surely glance at your Jeep(when no one is looking haha). It,s beautiful! Agree 100% for not getting to technical, all is in the hands of the driver who knows his vehicle and not abusing it over its limits.
Kyle - just found your videos, love them, I am restoring a 1998 TJ for my kid, and she LOVES your rims and tires - what are they? and What lift have you done
I have an 06 with the 2.4, 6 speed, 3.73 with 33s. Runs fine as long as I'm not on a hill on the freeway. I will upgrade to 4.88 before I switch to 35s.
I run 32's with 3.07 gears in a Dana 44 rear axle, also with a 4" lift. I previously had 28's and everything else was stock. I notice a difference but its very small, if I wanna drink a gallon of gas in a few seconds it'll still really move if I put my pedal to the floor. Love both your Jeeps, red and black looks very cool.
Running 33's on 307 and it sucks on freeways going up hill. Gotta drop into 1 low sometimes 2 low and get in the slow lane with the semis. 4.10s would be good for 33's a freeway driving and I want to drive to Moab, not trailer queen it. 307s can be lived with, but 3;73s or 410 would be a lot better for low end torque and keeping the RPMs in a good range for those long commutes to the trails.
I would have liked to have gone with 33’s but for that reason which I’ve heard others say too, I went with 32’s. Though I do dislike getting stuck behind slow people on hills because I do have to drop sometimes down to 2nd because of the loss of speed.
The reliability problems are from jk and jl models. When the tj was around it essentially was still an AMC blueprint but with a new 4 link dash and slightly different body lines in hood front fenders and grille. This is why when I buy another 2006 is the newest I would ever consider buying
My JK wandered a lot at higher speeds on the freeway on 35s. The issue was I had too much air in the tires! Once lowered to 28psi from 35psi it was perfect!
In 2008 I put new shocks on my '97 Wrangler( not modified at all) with(120000) mile. I started to get the death wobble this year 2021( 170,000miles now). I put new Goodyears P235-75-15 on it, new Monroe shocks & steering stabilizer, drives like brand new! I live in StL and drove it down to Tampa last month(3000 mile r/t)........Perfect! also it's a 2.5
Great videos man, i'm searching for my first Jeep, looking for a TJ of course! Found one locally, 2004 sport. Softop, 75k miles, 5speed, looks very clean from the pictures. I'll be using some of your tips to see if it is the right one
I got the 2.5 tj with an exhaust leak its so loud i cant hear myself talk on the phone even with a hard top😅 i love it though it makes it sound way better than it was originally i personally love the sound of the backfire pops especially downshifting
We've replaced basically every steering component on our jk including the steering box and every linkage in the front end. It still wanders. But I think we've found our culprit. When we test drove it it drove ok but definitely needed all those parts replaced but when we picked it up we noticed it wandered really bad and didn't before. Upon further inspection the dealer trying to make it drive better replaced the ball joints with cheap Napa ones that are known to cause all sorts of weird drivability issues. We are going to replace those with teraflex ball joints to see if that could actually be the problem. Anyone have some thoughts about it?
Never heard of ball joints in the axle causing bumpsteer. But anything could be possible I guess. I've always found a drop pittman arm to cause bumpsteer. Or steering angles between track bar and drag link.
Planning on buying a tj in a week went and checked it out yesterday. It’s a tj 4 cyl but I really loved it needs some work but I definitely think I’m getting it for a good price. Appreciate your vids tho man!!
I very much agree with you Kyle. It's also true that the majority of those who criticise Jeep,are people are people who don't have a Jeep and many of those cases they criticise themselves of envy,let's be clear. I don't waste time criticising Toyota,Mitsubishi,Land Rover,etc,i don't care,I enjoy my Jeep. Thank you Kyle for your video and waiting to see your half doors in red colour 😍
I’m currently looking to buy my first Wrangler! I have around $10k to spend and am looking for the 4.0, manual, with less than 100k miles. Fingers crossed when the time comes I end up with one that was taken care of, how much should I have set aside for maintenance and tuning up so it can be daily driven?
Quite a bit of work has been done on my jeep which I got recently. But how do I find out what gearing I need? I want to go from 33's to 35's tires. Thanks
Even the idea that the early jeeps were prone to tipping is mostly a myth, and comes primarily from a very misleading episode of a TV show called 60 minutes (hey did a very similar thing in the late 80's about SUVS being easy to tip, which was largely debunked at the time). The re-gearing one has always bothered me. Literally MILLIONS of people the world over have put bigger tires on their jeeps without re-gearing and not had problems.
Bought one in VA today , 5 hour ride home and the winds where up and that shit is no joke . Textin and driving my ass , not in a jeep had my hands 10 and 2 o’clock took like a hour plus to get the feel . Rollin on 33s 4 inch lift.
99 TJ with 35's, super reliable and loud, ITS A JEEP!! but I'm running 456's and it made a huge difference (wouldn't pull 5th gear at all). I rock crawl a little, hunt and fish and still drive it to work. best of all worlds. I do shift a lot in town though. Nice jeep by the way. SOOO pretty, come to AZ and I'll help you put some scratch's on it.
Hi my friend is giving me a 2001 Jeep Wrangler sport that has been sitting for 5 to 6 years. It needs a lot of framework plus a complete tuneup. I could do most of the work myself but I’d have to pay someone to repair the frame. I was just wondering what your thoughts are on how far invested I should get in such a jeep. Thank you
@@vigilantemotors Hey yes I did. I had the frame repaired at a place in Jersey that only does wrangler frames. I also had him change the gas skid plate and rear shocks since the nuts are known to spin or snap on them. $2,400 for that work. Then I did the whole suspension front & back myself down to the drive shaft u joints, hub bearings & everything else. Control arms, sway bars, steering components, bushings etc. I did all the fluids as well myself. Next job is the vapor tube for gas tank & dropping the tank since I have a problem filling up & nozzle clicking off. Lastly I have to change the rear main seal with the oil pan gasket. Both r leaking. I also paid someone to. Ha he the input shaft seal on transfer case & the other seal on transmission side since they had access to both. That was $600 but worth it. So basically it runs good aside from oil leak. Down the road I have to change steering shaft as my wheel has some slop on it. Any questions lemme know. Don’t go cheap in the parts. Esp the ball joints, u joints, hub bearings. Those r a lotta work to change n u only wanna do it once. I bought aftermarket control arms & steering components since I didn’t wanna dump too much $ in her without knowing the history. Feel free to ask any questions. Good luck buddy
@@pujo28 If you love it and are happy with it that's what matters. Glad you went and bought it and restored it as they are a dying breed! I am a mechanic so I do all the work myself, most of which anyone can do even with basic tools if they wanted to. Certainly you have yourself a capable rig that has been given a second life and I love that may man!!!!
@@vigilantemotors Thx. Yes they r def a dying breed. Any advice on rear main seal? There isn’t 1 video that really covers all of it. Do u offset it? The plastic piece at the back of oil pan is partially covering the 2 bolts on either side of oil pan. I’m assuming I would just wedge a socket on them? Appreciate any advice. I’d consider myself a garage mechanic
@@pujo28 Step 1, drain the oil. Next, unplug the O2 sensors. 2. With a 13mm socket, remove the nuts at the catalytic converter flange 3. With a 15mm socket, remove the nuts at the manifold 4. Next you want to remove your oil pan. (11mm, 12mm, 13mm). Keep note of where the different size bolts go. Also keep in mind where the studs go. 5. Remove the main cap girdle using a 14mm socket. Not all years have this item. 6. Next: Wiggle Main Cap With the bolts still in the main cap (but not threaded), wiggle the cap back and forth to free it from the block. Be careful not to damage the bearing that is in the cap. It is not unusual for the bearing to come out of the cap. If it does come out, just line the notch in the cap to the tang on the bearing and you’ll be ok, I promise. 7. Next, remove rear main seal from cap. Clean main cap. 8. Now you will want to remove the seal still in the block using a small drift punch or a small screwdriver. A couple taps or hard pressure on the seal should cause it to rotate out. Be careful not to nick the bearing or seal surface. Grab the side now sticking below the block with a pair of pliers and pull it out. 9. You will see the rear main seal remove it. Installation Installation is the reverse of removal: 1. Replace Seal replace jeep rear main seal Lube and install the new seal into the block. Be sure you have it facing the correct direction as per the mfg. instructions. Push and rotate the new seal in place. 2. Install into Main Cap Install the seal into the main cap and lube with engine oil. Make sure the seal is facing the correct direction, as stated above. 3. Add RTV, Install Cap Place a dab of silicone (RTV) on the corners of the seal, where the two pieces meet, and install the cap. Tap lightly with a rubber hammer to seat the cap. Torque the bolts to 80 ft/lbs. 4. Install Girdle Install the main cap girdle. Torque nuts to 35 ft/lbs. 5. RTV Corners Put some silicone (RTV) in the corners on the oil pan, where the cut outs are for the rear cap and front seal. 6. Place Pan Gasket Put the pan gasket in place and put some silicone in the same spots as above. 7. Install Oil Pan Install Oil Pan. Tighten pan bolts, DO NOT overtighten (7 ft/lbs). 8. Install Exhaust 9. Add Oil & Filter Does that help you at all? Aaron I have some how to videos on my channel if you are at all interested my man
I got Jeep lj (tj unlimited) I got 373 gears 4 speed automatic transmission and 33 inch tires. I want to lift it and run 35s but the thing drives amazing off and on road so I don’t see myself doing it anytime soon. The rag top is a little loud on the highway going 55-70 but it’s not as bad as some make it out to be. Definitely recommend Jeep’s they really are capable vehicles.
Kyle thanks so much for the videos you making and i just bought a tj because of your vidoes, can you please tell me your headlight rings and wheels is a mate black or metallic black?
Congrats on the jeep dude! The wheels are a flat black and the headligh bezels are bedlined th-cam.com/video/oar2vNFq0dE/w-d-xo.htmlsi=vJocMcnthzUiEqqn
I DD / offroad a 92 YJ w/ 4.0 lifted , 35's ect.. and it's very reliable, the 4.0 is one of the best motors ever.... My Heap drives like an old beat up truck , the tub is rotted , repaired the frame in a few spots ....keep up maintenance and have fun.
Ive no experience with new jeeps but have had some cj’s and Jeeps drive on the highway like trying to run with a piece of plywood and unless your driving on flat and level pavement with the solid front axle they wander in and out of the ruts making the driver constantly correct to drive between the white and yellow lines. My jeep scrambler drive pretty nice compared to the others
gears are important. if you are only in town maybe. but if you want to drive highways of offroad gears are a must going up to 35 and up. i have drove my tj for 16 years and have drove it in all configurations from stock to lifted,
I've highway commuted with hard and soft tops. Sometimes soft is quieter. Hard can bounce road noise around so it comes at you from all sides. Soft pops a bit more in the wind but the upward body and engine noise dampens or just passes up and out. Hard needs a little sound damping, IMO.
i made the mistake of driving our TJ through the Mojave with the top off in 40 mph winds with a bikini top and an old tire cover and at night. It made it one of the most sketchy drives ive experienced and that's saying a lot considering the shit we've done in my buddies Ghia lmao
Just a couple of points to mention, Boss. Tippy was from the width, not the wheel base. When the Jeep boys went to the Wide Track axles, it fixed many problems. Adding the wider tires helped, but the larger diameters stole back some of the helping part. Center of gravity and all. 4 inch lift, 2 inch wider tires each side, balances out basically. Reliable? I got 390k on mine, regular maintenance. I repeat, REGULAR! maintenance. Oil changes, brakes, tune ups. And check the fluids, the clutch, belts and rad fins. Sure I've done repairs.... Water pump twice, rad once. Soft top noise? Sure. They stretch. Period. Summer warmth, they stretch, spring and fall, cooler temps, they stretch less. Unless they're brand new, they're gonna make noise. My personal belief is, if the soft top is too noisy, drive a car, or a mini van. Death wobble, you got right on. Worn parts and alingnment 90 percent of the time. Gearing, again, right on. One Jeep, stock 3.31 gears, 33's. all is good. Other Jeep, 35's re-geared to 4.10. Stocker has a tuned up 4.2. Second a warmed up 4L. Both handle the hiway fine. And, both handle the hills and rocks fine. Good vid though. Keep 'em up. Educating other people is always a good thing. I've done the same thing off a stop light in town. People thinking the Jeep was slow.............. HA!
I have a 2004 Manual 5 speed 4L. Front Axle is a Dana 30/186mm Rear axle is a Dana M35/194 mm 3.73 Rear Axle Ratio Any thoughts / references if I can go to 35's tires?
Love your channel, particularly everything Tj.. love the look of yours.. I noticed you don’t have rock sliders (at least that I can see), what your thoughts on not having them? It looks a lot clean/minimalist without. Thanks.
I have a 2002 plane Jane TJ on 33s Dana 30 front Dana 35 rear 373 gears sitting on 33s. I can't get better than 65 mph and that's rolling down hill with the wind blowing on the back of the Jeep. I need 456 gears to run 35s
Jason, I bet its a good looking rig too! You know what, who cares about going 70 lol. I love the fact that you still have to "drive" the vehicle. To me that is what is missing in todays vehicles to be honest. The noise, the feel, the handle. Just my 2 cents though
@@vigilantemotors just a update. I just put a new to me motor and trans in it. I have 307 gears. I thought they where 373s. Went from the NV3550 manual trans to the AX15. About to head up north to Drummond island in Michigan. Hoping I can maintain 70ish with her now. Crossing my fingers otherwise it's gonna be a 6hr drive one way. Either way I'm gonna do it with a smile on my face. It's not about miles per gallon it's about smile per gallon. :-)
@@jasontanner5656 Hey even at 60 or 65 its all about the smiles my man. You have got one good set up going there. Camping? Off-roading? What is up that way?
@@vigilantemotors both. I'm excited. I haven't really tested my which out to pull myself out yet. I'm looking forward to testing it out in the morning. Super excited
@@jasontanner5656 Awesome man. I hope you have an amazing trip. Let me know how it goes if you like. Check my channel out on here you can message me anytime. Id love to know how that gearing does on the highway.
Nice jeep dude, love it!!! Two questions. Are they the Metalcloak fenders/flares? And what tire carrier, jerry can set up are you using? Got a 2003 Rubicon, 170,000 miles and runs like a champ. Needs some love, but it's solid. So, I concur with all you said. Nice video.
If I were to rate your Jeep, I'd say it's awesome! Such good taste. Not flashy, just classy. What would I change if it were mine? Go with the hard top, just tint the windows! Thanks for the video.
I own a 94 jeep wrangler I love my Jeep it runs great it needs a starter but my issues are frame rust it's a 4.0 inline 6 5 spd standard trans what can I do about frame rot
I just got picked up a 2003 tj 2.5 4 liter . Thing is lagging big time on the fwy. It's on 33s. And recommendations on what size gear I should go with ??
The TJ handled better because of the coil spring suspension VS the leaf springs on CJs and YJs which did not allow for much travel and flexibility, not because of the wheelbase.
My first Jeep was a 06 TJ and I ran 31's with a 2in suspension lift with front leveling kit and stock bumper and Warn winch. Never had a problem until I mounted a HiJack Jack onto the hood. The extra weight from the base mounted on the side of the passenger side because viewing was better begin the TJ Jeep Death Wobble. At first it unevenly wore my tires and a slight wobble began. Corrected with new tires. But after a year it unevenly wore the tires again and passenger side shock weaked from weight and began the full death wobble. Not sure what else it created but I'm sure that passenger side needed alot. I'm a strong believer of proper weight distribution now when it comes to mods. I just picked up a 2020 JL 4DR, so being a little wiser this time around. OlllllllO
one thing about jeeps that isn't a myth, is that once you start modifying you just cant seem to stop :)
JEEP =Just Empty Every Pocket.
Very true. I pumped so much money in my TJ. But I am NEVER parting company with it.
@@migellwedderburn5706 that is me , I love my 98
Me who’s putting a Cummins under my tj’s hood (6bt 12v)
or fixing it lol my problems
Officer I'm not drunk! It's just windy.
No shit right ,
True that. 😂
Lol that happens in my pajero too
I love my TJ, and yes only issue (minor) is driving in wind.
Yeah they suck ass on a windy day, but hey all the more fun!
I have a tj had a cj and I miss the leaf springs !!!!
Dude has directional mud tyres. And 2 on passenger side are on backwords!
Goodyear wrangler MTR are non directional tires. Do some research before spreading fake news
I learned that lesson in 2004 when I drove my beloved Jeep TJ through an active fire zone in Aguanga and Anza, CA.
I have a 2003 TJ with 140,000 miles. It is a manual transmission. I do several off roading trips a year. It is my daily driver. Other than having a limb go through my radiator, no mechanical issues at all. Never experienced death wobble, nor have I done anything to avoid it. I will never sell my Jeep.
Then you will experience death wobble. Front tracbar
@@perrystaton548 not likely.
Keep Good shocks, Steering stabilizer & balanced tires!
@@davidmechler5333 agreed. Basic preventive maintenance.
@@efs83dws your track bar bushing will wallow out and allow side to side play. Its happened to all 3 of my TJ's.
If you do ever develop death wobble the easy thing to do to fix it, go on ebay get a full bushing kit for 250. Replace your control arm bushings, track bar front and rear along with the say bar bushings them throw a new stabilizer on there. The ride is day and night different. Also of you have a "dead" spot on your steering wheel when turning or driving that is tie rods and drag link issues, you can also look up the "cure" its a metal bushing that connects the tie rod to the drag line to help prevent roll from a worn out joint.
Hopefully you never need to do any of it but i know on my 98, 03 and 04 they all needed it.
I can agree with the wind statement 😂
The wind can be your enemy at times😂😂😂
Quick fix on the wind issues. Drop the top and lose the doors. Works fer me.
JeepAnimal real pleasant in the winter too
I’ve found Jeeps to be extremely reliable as well. I’ve had several and they’ve been amazing.
Why did you get rid of the other 2
Reliable is a relative word. TJs are very reliable for the engine and transmission, but even the staunchest Jeep defenders will admit the check engine light is on far, far too often compared to something well built like a Toyota.
Love my TJ, but reliability is not one it's perks unless you are referring tot eh drive train. And Jeeps are loud AF, that is just the nature of the beast.
Know your limitations and you will be happy.
In general its amazing how many automobile myths stick around for decades.
Says right on the side of the tire which side to mount inboard look on the tire
Not trying to be a jerk but it makes the rig look silly is all
dude all the tires are mounted properly
KyleSVT burn
Ya, especially the one about 4 liters being bullet proof.....
I bought my first 06 TJ at 63K miles and when I turned 18. Fast forward 10 years later, it's still chugging along at 170K miles. Definitely keeping it for life.
I had my TJ since 2004. The only issue I had was a clutch that failed. Beyond that, the TJ is a pretty solid vehicle.
Just got my first TJ, 2005 with 4.0. Love it. I am happy to have this, cant wait to use the 4x4 side of it.
I really liked this video. I’m deciding on getting a TJ and I need videos of people that own TJs right now.
Have you found one yet that you are thinking of buying?
Wranglers aren't what gave Jeep the unreliable reputation. It's the numerous electrical problems on the Grand Cherokee and all the dumb gadgets they'd throw on them.
It's not bad reliability that gave US cars a bad reputation, it's the piss poor materials used in the interior and build quality coupled with garbage fuel economy. Ford Taurus, crown victoria were all very reliable, probably just as reliable as toyotas. Let's face it, if the interior of a TJ wrangler was in a sedan, it would be unacceptable haha.
I agree with this 100%. This is also the case with trucks...
I think the YJ kinda helped the idea where it had plastic engine parts making it unreliable.(I'm not so sure)
And the FIAT Wranglers hurt too
@@MCGaar yup modern jeeps suck..... The tj is the last real jeep.... It's the E46 M3 of the jeep brand
I’ve had a 97 TJ for 10 years it’s the most reliable automobile I have ever had. I have a new aftermarket soft top which is thicker than my factory top it fits better and is quieter. I’m also running 32’s with a 4 inch lift and although it’s a bit more a struggle on steep hills on flat on gradual inclines even with 3.07 gears it still really goes, there is a slight decline in acceleration but it’s very little and doesn’t affect my ability to pass other vehicles quickly if I have to. It runs straight but I do feel holes in the road but it’s no different with the lift as it was factory, I love my TJ.
Where did you buy your top?
I agree with you....
I drive a 2018 JK w 35 with lift, and it runs perfect I've been driven on 80 and 90 miles per hour and runs perfect, like you said if you do erratic driving or it is windy you might have some issues but winds give issues to mostly every car
I love the chats about the TJ. Love my TJ 4.0. Never getting rid of it. Was cleaning out the interior of my frame tonight. Never ending battle. But I wont give up the fight.
Yes! Wind is not fun in the TJ. I was pulling a small trailer and was being pushed around. Little sketch but I made it safe and sound. Thanks for the videos brother!
Thanks man!
yeah iv had my TJ for 13 years and it has a little engine noise but its a daily driver and still runs great. soft top is a bit loud but not much more than the hard top i had in a earlier jeep.
i love my TJ though!
9,000 miles is crazy !!! I love my Tj and I couldn’t agree more with everything you said
I Love your vids Kyle, you have the best Jeep TJ channel on TH-cam and it has really helped me out a lot! Thanks!
Thank you! Glad I could help!
Another huge contribution to death wobble is alignment, especially caster. On another note, I don’t know how or where you found a tj with 9k miles, but that’s amazing!
Isn’t there no castor adjustment on a TJ? Only toe in or out.
I have a 05 TJ with the 4.0 and 4 speed auto. Factory 3.73’s and 33’s are perfectly fine.
I really enjoy your channel. I bought an 05 Jeep TJ with straight six and six speeds. I didn't know it had AC until I saw a leak under the engine and realized it was condensation from the AC condenser, which I was happy to discover. I am inspired by your videos and am having fun customizing our Jeep. Thanks....
Thank you! Very cool!
I have had 3 Jeeps, found all to be very reliable.
The TJ wheelbase is about the same as the YJ and CJ7.
The track width isn't very different either. The YJ and TJ use axles of the same width. The CJ7 used narrower axles, but rim backspacing and tire width may have made up a bit of the difference. CJ springmounts were more inboard than on the YJ, but this may have aided articulation.
TJs have front and rear anti-swaybars. YJs and CJ7s only have a front anti-swaybar.
CJs had no trackbars, and didn't need them. YJs had them, but didn't need them.
Live-axle coilsprung Jeeps should have triangulated upper linkage, IMO. Trackbars are BS engineering for Quadracoil. They are prone to deathwobble, bumpsteer, etc. Leafsprung Jeeps had live axles and trackbars were unnecessary. My CJs and YJ never wobbled, even without any trackbars.
2dr SWB Wranglers are still more prone to rolling than most passenger cars. The COG is higher and the wheelbase is shorter. Cars like Corvettes also have downforce, a very wide trackwidth, and STIFF anti-swaybars, so they are very stable during cornering. This isn't to say that Wranglers are unsafe. Just don't try to drive them like a sportscar.
For death wobble, check the front track bar bushing. Have someone turn the steering wheel while you look at the attachment point of the track bar to the frame. Do this carefully with the vehicle in park and the engine running. If there is a lot of play, the bushing is bad. Replace the track bar.
I've seen where the track bar bracket has the hole wallowed out too. Egg shaped
anyone else likes when he reviews other peoples jeeps!
Hey, I’ve been taking notes, your jeep is exactly my jeep when i was kid . Anyway, Injust copped one, I pushed 80pmh plus, no death wobbles driving all the way from New Hampshire. I love it. I have an 02, 4.0, got it for 2k. Just needed a crank shaft position sensor and some rust work done to the frames. After, I will come back for some mods ideas and stuffs. Beautiful Jeep.
Very cool! Thank you!
I have an 05 with an automatic transmission. I was having issues with shutter on takeoff. WranglerFix fixed everything I was having an issue with in the stock PCM. I’m running Netto Mud Grapplers 33-13.5-15 and it has a 2 inch lift. I replaced the rear 35 with a Dana 44 and installed an E Locker with 4:56 ring and pinion. I put a Power Trax Lock Right in the front Dana 30. I live in the Sierra Nevada mountains, and my Jeep gets me everywhere I want to go. I spend a lot of time in the Sequoia National Forest because I live here, and my TJ has been the perfect trail rig. It turns on a dime, and the 4.0 has all the torque I need to get up and down these mountain roads without any issues.
Had mine for going on 27 years brand new. Extremely reliable and fun to drive. 4.0 5 speed just over 129k miles. Bought it new.
I have a 06 jeep wrangler se 4.0 automatic with the stock daina 34 back and 30 front with stock gears on a 4 inch lift with 35's grabber x3 tires and it runs great! I also have a superchip installed running in tow mode and it still has a lot of power I live in hawaii and it's a perfect island vehicle.
Very cool!
Biggest TJ downside may be interior space, but the agile,compact chassis that creates that can get you near anywhere.
Small trailer
I drive 95 Yj four banger,leaf spring suspension,its lifted around 2 inches front and with heavy duty shackles and 2 and !/2 inch springs in the rear, I removed the front sway bar and the rear pan hard rod, the front has caster wedges. When I bought the jeep the previous owners had the axles under the springs, to raise it, and it was all screwed up,gear ratio,s are 375 with 29 inch tires,my issue is ,I have plenty of low end torque but I have never been able to hit 5000 rpm I had the computer reflashed with an emission delete, this jeep has no converter but still has the sensor, the engine was rebuilt at some point ( rtv) on the pan, oil pressure cold is 65 lbs, then drops to 25 after its warmed up, at idle but stays at 60 when your on the highway (compression is 160) they only thing I did was replace the timing gears and chain, I do all the repairs and maintenance myself,im 67 and have worked on foreign cars most of my life, but this thing is a blast, in the summer the roof and doors come off, and I dont have to worry about rain because there is no carpets on the floor pans, after blasting in the mud, I just remove the drain plugs on the floor,put a garbage bag over the one seat, and hit the car wash ( I remove the passenger seat so I can stuff my kayak in it
literally one of the best looking tj’s i’ve ever seen!! what fenders do you have??
Thanks! They are metalcloak overline
havent seen mine then lol
Wyatt Flamont what you got? i just got my first jeep two weeks ago. love it
@@nickallen5170 05 tj. Look up s33k3rj33p3r on IG
Wyatt Flamont oh yeah i like yours! metal cloak fenders too i see, nice nice. i have a black one as well. 98... not as many upgrades as you yet tho haha, soon hopefully
My old tj was tippy past 60. Broke down constantly and my soft top was so loud you couldn't hear anything while driving. But man was it fun to drive. Terrible on the highway okay to put around town. But amazing offroad
Good vid to dispel these unfounded myths .A lot of people that had to sell there Tjs had regrets of selling them Im going to keep mine as long as i can.
Thanks Brad!
As a Jeep owner myself, I agree with you. I have owned 14 Jeeps in my life. Presently, I own a 98 TJ Sport, 88 YJ Sahara, and a 45 Willy's MB. Jeeps are fun and have to be taken care of properly.
Has anyone heard what is the thickest soft top you can buy?
Bestop makes the thickest and best ones
You surely glance at your Jeep(when no one is looking haha). It,s beautiful! Agree 100% for not getting to technical, all is in the hands of the driver who knows his vehicle and not abusing it over its limits.
Thanks!
Kyle - just found your videos, love them, I am restoring a 1998 TJ for my kid, and she LOVES your rims and tires - what are they? and What lift have you done
Thank you! They are black rock defender 905 15x10 (discontinued) Tires are Goodyear MTR 35x12.5x15 and no lift just the metalcloak overline fenders
I have an 06 with the 2.4, 6 speed, 3.73 with 33s. Runs fine as long as I'm not on a hill on the freeway. I will upgrade to 4.88 before I switch to 35s.
i have a 2003 wrangler Rubicon and i love the way it handles, in fact no complaints at all . great informative video, thanks
I taught my daughter how to drive a manual in my ‘00 TJ and it drove great.. 👍🏻
That’s what I am doing currently with my daughter. Same year and manual as well.
I run 32's with 3.07 gears in a Dana 44 rear axle, also with a 4" lift. I previously had 28's and everything else was stock. I notice a difference but its very small, if I wanna drink a gallon of gas in a few seconds it'll still really move if I put my pedal to the floor. Love both your Jeeps, red and black looks very cool.
Thanks Josh
Running 33's on 307 and it sucks on freeways going up hill. Gotta drop into 1 low sometimes 2 low and get in the slow lane with the semis. 4.10s would be good for 33's a freeway driving and I want to drive to Moab, not trailer queen it.
307s can be lived with, but 3;73s or 410 would be a lot better for low end torque and keeping the RPMs in a good range for those long commutes to the trails.
I would have liked to have gone with 33’s but for that reason which I’ve heard others say too, I went with 32’s. Though I do dislike getting stuck behind slow people on hills because I do have to drop sometimes down to 2nd because of the loss of speed.
Got an 07 JK Sahara, and love it!Got the factory mopar soft-top, and a slight lift.
Love the TJs, I just like the size of the JK
The reliability problems are from jk and jl models. When the tj was around it essentially was still an AMC blueprint but with a new 4 link dash and slightly different body lines in hood front fenders and grille. This is why when I buy another 2006 is the newest I would ever consider buying
My JK wandered a lot at higher speeds on the freeway on 35s. The issue was I had too much air in the tires! Once lowered to 28psi from 35psi it was perfect!
Dude, finding this out was night and Day for me. Aired down to 25psi from 40psi and it’s like butter at 55-60 now.
This is a huge factor that people don’t realize! I run 35s at 26 psi
In 2008 I put new shocks on my '97 Wrangler( not modified at all) with(120000) mile. I started to get the death wobble this year 2021( 170,000miles now). I put new Goodyears P235-75-15 on it, new Monroe shocks & steering stabilizer, drives like brand new! I live in StL and drove it down to Tampa last month(3000 mile r/t)........Perfect! also it's a 2.5
Great videos man, i'm searching for my first Jeep, looking for a TJ of course! Found one locally, 2004 sport. Softop, 75k miles, 5speed, looks very clean from the pictures. I'll be using some of your tips to see if it is the right one
Thanks Greg!
I got the 2.5 tj with an exhaust leak its so loud i cant hear myself talk on the phone even with a hard top😅 i love it though it makes it sound way better than it was originally i personally love the sound of the backfire pops especially downshifting
We've replaced basically every steering component on our jk including the steering box and every linkage in the front end. It still wanders. But I think we've found our culprit. When we test drove it it drove ok but definitely needed all those parts replaced but when we picked it up we noticed it wandered really bad and didn't before. Upon further inspection the dealer trying to make it drive better replaced the ball joints with cheap Napa ones that are known to cause all sorts of weird drivability issues. We are going to replace those with teraflex ball joints to see if that could actually be the problem. Anyone have some thoughts about it?
Never heard of ball joints in the axle causing bumpsteer.
But anything could be possible I guess.
I've always found a drop pittman arm to cause bumpsteer.
Or steering angles between track bar and drag link.
Planning on buying a tj in a week went and checked it out yesterday. It’s a tj 4 cyl but I really loved it needs some work but I definitely think I’m getting it for a good price. Appreciate your vids tho man!!
I very much agree with you Kyle. It's also true that the majority of those who criticise Jeep,are people are people who don't have a Jeep and many of those cases they criticise themselves of envy,let's be clear. I don't waste time criticising Toyota,Mitsubishi,Land Rover,etc,i don't care,I enjoy my Jeep. Thank you Kyle for your video and waiting to see your half doors in red colour 😍
Well said Nacho!
Your TJ looks great. Your channel is making me want one!
Thank you sir!
I have 33s on a 4 inch lift. It feels tippy turning corners even pretty slow. Would upgrading to 35s be stupid? I don’t want a less smooth ride
Nice video! I'm so jealous of your beautiful TJ can't wait to find my own 💕
Thanks Alondra!
May I ask what year, trim, and tire is on your red Jeep?
2001, sport, 35inch goodyear mtr
@@KyleSVT I'M LOOKING TO BUY MY FIRST WRANGLER. THERE IS A 2001 SPORT, 4.0L L6 OHV12V, 4WD UPSTATE NY. ONLY ASKING $8000. 121K MILES
What front and back fenders are those? Beautiful !
I’m currently looking to buy my first Wrangler! I have around $10k to spend and am looking for the 4.0, manual, with less than 100k miles. Fingers crossed when the time comes I end up with one that was taken care of, how much should I have set aside for maintenance and tuning up so it can be daily driven?
Quite a bit of work has been done on my jeep which I got recently. But how do I find out what gearing I need? I want to go from 33's to 35's tires. Thanks
i do not wanna sound basic but this is the car i will want forever
Yes easy to fix and if taking care of it will was a life time
I got 25 years on my jeep
From the TJ back, is where you will find reliability increases if properly maintained (properly being key).
Even the idea that the early jeeps were prone to tipping is mostly a myth, and comes primarily from a very misleading episode of a TV show called 60 minutes (hey did a very similar thing in the late 80's about SUVS being easy to tip, which was largely debunked at the time).
The re-gearing one has always bothered me. Literally MILLIONS of people the world over have put bigger tires on their jeeps without re-gearing and not had problems.
Thanks for this video i am getting 35s on mine this week. Perfect timing with a video kyle!
Thanks for watching John!
I got 35s and 4 cylinder and it does it good
Bought one in VA today , 5 hour ride home and the winds where up and that shit is no joke . Textin and driving my ass , not in a jeep had my hands 10 and 2 o’clock took like a hour plus to get the feel . Rollin on 33s 4 inch lift.
99 TJ with 35's, super reliable and loud, ITS A JEEP!! but I'm running 456's and it made a huge difference (wouldn't pull 5th gear at all). I rock crawl a little, hunt and fish and still drive it to work. best of all worlds. I do shift a lot in town though. Nice jeep by the way. SOOO pretty, come to AZ and I'll help you put some scratch's on it.
Thanks brother! haha yea I want to avoid the scratches
Hi my friend is giving me a 2001 Jeep Wrangler sport that has been sitting for 5 to 6 years. It needs a lot of framework plus a complete tuneup. I could do most of the work myself but I’d have to pay someone to repair the frame. I was just wondering what your thoughts are on how far invested I should get in such a jeep. Thank you
Jake did you begin this process yet?
@@vigilantemotors Hey yes I did. I had the frame repaired at a place in Jersey that only does wrangler frames. I also had him change the gas skid plate and rear shocks since the nuts are known to spin or snap on them. $2,400 for that work. Then I did the whole suspension front & back myself down to the drive shaft u joints, hub bearings & everything else. Control arms, sway bars, steering components, bushings etc. I did all the fluids as well myself. Next job is the vapor tube for gas tank & dropping the tank since I have a problem filling up & nozzle clicking off. Lastly I have to change the rear main seal with the oil pan gasket. Both r leaking. I also paid someone to. Ha he the input shaft seal on transfer case & the other seal on transmission side since they had access to both. That was $600 but worth it. So basically it runs good aside from oil leak. Down the road I have to change steering shaft as my wheel has some slop on it. Any questions lemme know. Don’t go cheap in the parts. Esp the ball joints, u joints, hub bearings. Those r a lotta work to change n u only wanna do it once. I bought aftermarket control arms & steering components since I didn’t wanna dump too much $ in her without knowing the history. Feel free to ask any questions. Good luck buddy
@@pujo28 If you love it and are happy with it that's what matters. Glad you went and bought it and restored it as they are a dying breed!
I am a mechanic so I do all the work myself, most of which anyone can do even with basic tools if they wanted to.
Certainly you have yourself a capable rig that has been given a second life and I love that may man!!!!
@@vigilantemotors Thx. Yes they r def a dying breed. Any advice on rear main seal? There isn’t 1 video that really covers all of it. Do u offset it? The plastic piece at the back of oil pan is partially covering the 2 bolts on either side of oil pan. I’m assuming I would just wedge a socket on them? Appreciate any advice. I’d consider myself a garage mechanic
@@pujo28 Step 1, drain the oil. Next,
unplug the O2 sensors.
2. With a 13mm socket, remove the nuts at the catalytic converter flange
3. With a 15mm socket, remove the nuts at the manifold
4. Next you want to remove your oil pan.
(11mm, 12mm, 13mm). Keep note of where the different size bolts go. Also keep in mind where the studs go.
5. Remove the main cap girdle using a 14mm socket. Not all years have this item.
6. Next: Wiggle Main Cap
With the bolts still in the main cap (but not threaded), wiggle the cap back and forth to free it from the block. Be careful not to damage the bearing that is in the cap. It is not unusual for the bearing to come out of the cap. If it does come out, just line the notch in the cap to the tang on the bearing and you’ll be ok, I promise.
7. Next, remove rear main seal from cap. Clean main cap.
8. Now you will want to
remove the seal still in the block using a small drift punch or a small screwdriver. A couple taps or hard pressure on the seal should cause it to rotate out. Be careful not to nick the bearing or seal surface. Grab the side now sticking below the block with a pair of pliers and pull it out.
9. You will see the rear main seal remove it.
Installation
Installation is the reverse of removal:
1. Replace Seal
replace jeep rear main seal
Lube and install the new seal into the block. Be sure you have it facing the correct direction as per the mfg. instructions.
Push and rotate the new seal in place.
2. Install into Main Cap
Install the seal into the main cap and lube with engine oil. Make sure the seal is facing the correct direction, as stated above.
3. Add RTV, Install Cap
Place a dab of silicone (RTV) on the corners of the seal, where the two pieces meet, and install the cap. Tap lightly with a rubber hammer to seat the cap. Torque the bolts to 80 ft/lbs.
4. Install Girdle
Install the main cap girdle. Torque nuts to 35 ft/lbs.
5. RTV Corners
Put some silicone (RTV) in the corners on the oil pan, where the cut outs are for the rear cap and front seal.
6. Place Pan Gasket
Put the pan gasket in place and put some silicone in the same spots as above.
7. Install Oil Pan
Install Oil Pan. Tighten pan bolts, DO NOT overtighten (7 ft/lbs).
8. Install Exhaust
9. Add Oil & Filter
Does that help you at all?
Aaron
I have some how to videos on my channel if you are at all interested my man
I have a shot at an 05 LJ soft top manual 6 for about $10k. Can’t tell if that’s high or about right. Appreciate your thoughts.
I got Jeep lj (tj unlimited) I got 373 gears 4 speed automatic transmission and 33 inch tires. I want to lift it and run 35s but the thing drives amazing off and on road so I don’t see myself doing it anytime soon. The rag top is a little loud on the highway going 55-70 but it’s not as bad as some make it out to be. Definitely recommend Jeep’s they really are capable vehicles.
Kyle thanks so much for the videos you making and i just bought a tj because of your vidoes, can you please tell me your headlight rings and wheels is a mate black or metallic black?
Congrats on the jeep dude! The wheels are a flat black and the headligh bezels are bedlined th-cam.com/video/oar2vNFq0dE/w-d-xo.htmlsi=vJocMcnthzUiEqqn
I DD / offroad a 92 YJ w/ 4.0 lifted , 35's ect.. and it's very reliable, the 4.0 is one of the best motors ever.... My Heap drives like an old beat up truck , the tub is rotted , repaired the frame in a few spots ....keep up maintenance and have fun.
Death wobble is, indeed, easy to stop. However, changing the steering stabiliser is a little too easy a fix for it to work.
Ive no experience with new jeeps but have had some cj’s and Jeeps drive on the highway like trying to run with a piece of plywood and unless your driving on flat and level pavement with the solid front axle they wander in and out of the ruts making the driver constantly correct to drive between the white and yellow lines. My jeep scrambler drive pretty nice compared to the others
gears are important. if you are only in town maybe. but if you want to drive highways of offroad gears are a must going up to 35 and up. i have drove my tj for 16 years and have drove it in all configurations from stock to lifted,
Will have to say the 2.4l 4cyl in the 06 models is lot better as far power than the earlier models .
I've highway commuted with hard and soft tops. Sometimes soft is quieter. Hard can bounce road noise around so it comes at you from all sides. Soft pops a bit more in the wind but the upward body and engine noise dampens or just passes up and out. Hard needs a little sound damping, IMO.
i made the mistake of driving our TJ through the Mojave with the top off in 40 mph winds with a bikini top and an old tire cover and at night. It made it one of the most sketchy drives ive experienced and that's saying a lot considering the shit we've done in my buddies Ghia lmao
Just a couple of points to mention, Boss. Tippy was from the width, not the wheel base. When the Jeep boys went to the Wide Track axles, it fixed many problems. Adding the wider tires helped, but the larger diameters stole back some of the helping part. Center of gravity and all. 4 inch lift, 2 inch wider tires each side, balances out basically. Reliable? I got 390k on mine, regular maintenance. I repeat, REGULAR! maintenance. Oil changes, brakes, tune ups. And check the fluids, the clutch, belts and rad fins. Sure I've done repairs.... Water pump twice, rad once. Soft top noise? Sure. They stretch. Period. Summer warmth, they stretch, spring and fall, cooler temps, they stretch less. Unless they're brand new, they're gonna make noise. My personal belief is, if the soft top is too noisy, drive a car, or a mini van. Death wobble, you got right on. Worn parts and alingnment 90 percent of the time. Gearing, again, right on. One Jeep, stock 3.31 gears, 33's. all is good. Other Jeep, 35's re-geared to 4.10. Stocker has a tuned up 4.2. Second a warmed up 4L. Both handle the hiway fine. And, both handle the hills and rocks fine. Good vid though. Keep 'em up. Educating other people is always a good thing. I've done the same thing off a stop light in town. People thinking the Jeep was slow.............. HA!
Could u please share the paint code on that jeep. I am planning to repaint my tj red same as yours
Flame Red is the color
I have a 2004 Manual 5 speed 4L.
Front Axle is a Dana 30/186mm
Rear axle is a Dana M35/194 mm
3.73 Rear Axle Ratio
Any thoughts / references if I can go to 35's tires?
Im running 35s on 3.73s have a bunch of driving videos so you can see if the acceleration is good enough for you. It is for me
I think people say they are unreliable because they hear about all the parts people break while off roading
Death wobble is always caused by something that is effecting one’s caster angle in the front end.
Love your channel, particularly everything Tj.. love the look of yours.. I noticed you don’t have rock sliders (at least that I can see), what your thoughts on not having them? It looks a lot clean/minimalist without. Thanks.
Thank you! I eventually want to get the metacloak rock guards
Had a 2008 JK, had to get rid of it because of the transmission rebuild it was going to need in the near future. I want a TJ or maybe Cherokee
9000 mile TJ is unheard of! Nice find
Thank you
I have a 2002 plane Jane TJ on 33s Dana 30 front Dana 35 rear 373 gears sitting on 33s. I can't get better than 65 mph and that's rolling down hill with the wind blowing on the back of the Jeep. I need 456 gears to run 35s
Jason, I bet its a good looking rig too! You know what, who cares about going 70 lol. I love the fact that you still have to "drive" the vehicle. To me that is what is missing in todays vehicles to be honest. The noise, the feel, the handle. Just my 2 cents though
@@vigilantemotors just a update. I just put a new to me motor and trans in it. I have 307 gears. I thought they where 373s. Went from the NV3550 manual trans to the AX15. About to head up north to Drummond island in Michigan. Hoping I can maintain 70ish with her now. Crossing my fingers otherwise it's gonna be a 6hr drive one way. Either way I'm gonna do it with a smile on my face. It's not about miles per gallon it's about smile per gallon. :-)
@@jasontanner5656 Hey even at 60 or 65 its all about the smiles my man. You have got one good set up going there.
Camping? Off-roading? What is up that way?
@@vigilantemotors both. I'm excited. I haven't really tested my which out to pull myself out yet. I'm looking forward to testing it out in the morning. Super excited
@@jasontanner5656 Awesome man. I hope you have an amazing trip. Let me know how it goes if you like.
Check my channel out on here you can message me anytime. Id love to know how that gearing does on the highway.
How do you condition your top and windows?
I just wash my top with normal car wash but bestop sells a cleaning and conditioner kit if you want to go that rout as well
Nice jeep dude, love it!!! Two questions. Are they the Metalcloak fenders/flares? And what tire carrier, jerry can set up are you using?
Got a 2003 Rubicon, 170,000 miles and runs like a champ. Needs some love, but it's solid. So, I concur with all you said. Nice video.
Thank you! Yes they are metalcloak overline fenders. LOD expedition rear bumper and tire carrier setup.
th-cam.com/video/zija0kaf7PI/w-d-xo.html
@@KyleSVT thanks for the reply and info much appreciated! It's restoration/upgrade time for mine. Again, sweet looking jeep ✌🏻️!
@@ericbauer4897 np! Thank you
If I were to rate your Jeep, I'd say it's awesome! Such good taste. Not flashy, just classy. What would I change if it were mine? Go with the hard top, just tint the windows! Thanks for the video.
Thanks Matt!
Love that stanced look on your TJ!🍻
I love that this jeep! You have one of the nicest ones I’ve seen. Subscribed
Thank you!
I own a 94 jeep wrangler I love my Jeep it runs great it needs a starter but my issues are frame rust it's a 4.0 inline 6 5 spd standard trans what can I do about frame rot
There are a bunch of places that sell secitions of thr frame to replace rotted out parts. Just needs to be cut and and new parts wleded in
What kind of fenders are those?
metalcloak overline
I just got picked up a 2003 tj 2.5 4 liter . Thing is lagging big time on the fwy. It's on 33s. And recommendations on what size gear I should go with ??
What gears are in it now?
The TJ handled better because of the coil spring suspension VS the leaf springs on CJs and YJs which did not allow for much travel and flexibility, not because of the wheelbase.
What brand fenders do you have on that beauty?
metalcloak overline
Great Video Com-rad
спасибо товарищ
The 2.5L in the early TJs are also damn reliable if taken care of.
Also, these things are super easy to work on.
They sure are!
Always love the Jeep video Kyle, keep it up! 👍🏻🤘🏻
Thanks man!
I have a 04 wrangler, wanting new fender flares, but don’t like the one’s out for it..I like yours, where did you get
Metalcloak overline
Did you tint your back windows there the shade of dark i want on mine
bought tinted windows from bestop
Your a cool guy. Thanks for all the help u give .
Thank you! Glad I can help out :)
My first Jeep was a 06 TJ and I ran 31's with a 2in suspension lift with front leveling kit and stock bumper and Warn winch. Never had a problem until I mounted a HiJack Jack onto the hood. The extra weight from the base mounted on the side of the passenger side because viewing was better begin the TJ Jeep Death Wobble. At first it unevenly wore my tires and a slight wobble began. Corrected with new tires. But after a year it unevenly wore the tires again and passenger side shock weaked from weight and began the full death wobble. Not sure what else it created but I'm sure that passenger side needed alot. I'm a strong believer of proper weight distribution now when it comes to mods. I just picked up a 2020 JL 4DR, so being a little wiser this time around. OlllllllO