I was not aware of what this feature did. Your tutorial is going to save me so much time running jobs! Thank you for such a wonderfully concise tutorial!
I was just thinking last night that I wish I could do that as I was flipping output off and moving things to new layers! I think you just saved me a bunch of time...
I just watched 20 minutes of videos to figure this out with no luck, until I found your video! Thank you so much! I'm new with laser engraving and this explained so much in a simple way. This video is going to help so much!
Fantastic, Knowledge is WONDERFUL thank you very much for all you videos that you have produced that has helped me understanding LightBurn as a beginner i need all the help i can get THANK YOU.
Thank you I was having trouble with this like when I start to cut an image, the laser wouldn’t recognizing all of the parts so now your video helped me a lot thank you
Tonja, Thank you so much for the Thanks! I really appreciate your support. This will go,along way into purchasing some better lighting for my videos. I truly appreciate you! ❤️
THANK YOU!!! I have so many designs on my screen all different colors output off it gets so confusing. This will help me so much. Again you saved my sanity!!!
Good evening Robert. Goodness knows why TH-cam isn't notifying me when you make a new tutorial - I was just thinking I haven't heard from you in whats seems like an age, so went directly to your channel and noticed there are three consecutive ones I haven't seen - now excited to binge watch them :-) Alos, thanks for the email the other month, was so great to g=hear from you in more detail - I hope you got my reply? Well, what can I say OMG, I waste so much time flipping the outputs on and off, and changing layer colours time and time again, and sometimes so much that I make mistakes! This is AMAZING news, and I will start using this right away. I cant believe I never even noticed these features Robert. thank you so so much, it is going to be such a great time saver. I learn something new from each and every tutoru=ial of yours, and I also use them as reference later down the line when im struggling with something. I absolutely love this I hope you and your family are well, and enjoying the small steps back to normality that we seem to be enjoying at the moment. Im absolutely loving my laser, and a lot of that is down to you Terry
my wife and I where just talking about we haven’t seen any post from you and was hoping you where ok. so glad to hear from you! I did get your response so thank you for that. I appreciate your comments as always. stay in touch my friend. here is to safe lasering.
Thank you! That is very helpful information. I was thinking that is how this setting worked, but I kept getting that "nothing selected" warning. This explains why. At first I thought "cut" meant for the laser to only physically penetrate all the way through the material, not encompass both "cut" and "engrave" in one setting. That makes the label kind of confusing for beginners. Maybe Lightburn should rename this setting to "process all selected items," in future updates, in order to prevent confusion? Just my two cents. Lightburn is Amazing software, and fun to use. Thanks again for the information, and keep up the great work! 👍👍
I am just getting around to understanding Origin settings. This tutorial is spot on! As usual, I have to go through a tutorial several times to get the details implanted in my head. Do you usually leave Cut Select Graphic and Use Selection Origin on when designing your file? Tomorrow I am going to research your tutorials for one on understand Optimize Cut path. Thanks to you providing details that I could not find elsewhere. Lucie
Great video. Just what I was looking for. I will need to change my workflow because currently I am sending files to my Longer Ray 5 using wi-fi, but Lightburn doesn't talk to the Ray 5 over wifi (out of the box).
Again you have talked about a feature that I did not know about until you made the video. Thanks for the info. I am looking at buying a 40w (diode) laser so that I can cut thicker material. I have a 3918 cnc and dont want to buy a seperate machine, but do want be able to cut.
Thank you! When I design multiple items, I will stage the designs /duplicates/reference notes outside the grid .....then they don’t get sent to the laser😎 Love Lightburn
Robert, Can you do a video showing how you would engrave inside of a deep tray (with 4" Lens) using Origin to avoid having a head crash? I can't figure out how to do this.
If your "Start From" setting is set to Absolute Coordinates, and assuming the material has not been moved, what is the value of Use Selection Origin? One would think using absolute coord. eliminates this selection from considerations. Thanks.
I like reusing scrap material, so I never use absolute coordinates. I want to position my laser head where my material will accommodate the job and press start.
You never covered CUT SELECTED GRAPHICS. My laser runs but does not put out enough power to even engrave (like its doing a simulated preview) how do I tell it the power and speed when I use this? :( I am using a 10w LongerRay 5
Hi friend, I have zero knowledge on laser cutting machine. Due to my work required I have purchase an ATOMSTACK XPRO and try to mark some numbering on electrical wire surface, just to mark some letter like ACHGF 12344566 and so on.
I did that but it still don’t cut out the center of designs that have cut outs It’s like you got to do each layer. Tell her what to do then the laser does so much then at homes then you got a click on the next button. It’s crazy. I thought you can group everything and click on black for cut, but it don’t work that way I’m still having problems.
I was not aware of what this feature did. Your tutorial is going to save me so much time running jobs! Thank you for such a wonderfully concise tutorial!
Happy to help!
Thanks for taking the time to put this video together, this was super helpful.
my pleasure glad it helped
I was just thinking last night that I wish I could do that as I was flipping output off and moving things to new layers! I think you just saved me a bunch of time...
Yes! once I started using this function it made a big difference in my work flow. Thanks for the comments and watching.
I just watched 20 minutes of videos to figure this out with no luck, until I found your video! Thank you so much! I'm new with laser engraving and this explained so much in a simple way. This video is going to help so much!
Glad it helped!thanks for the comment
Fantastic, Knowledge is WONDERFUL thank you very much for all you videos that you have produced that has helped me understanding LightBurn as a beginner i need all the help i can get THANK YOU.
Glad it was helpful!
this was exactly what i was looking for to do instead of having multiple files.
I leave those two features on all the time
Omg , I could save so much of materials, you are the best teacher , thank you,
You're very welcome! this was a game changer when I leaned it. thanks for watching!
Thank you I was having trouble with this like when I start to cut an image, the laser wouldn’t recognizing all of the parts so now your video helped me a lot thank you
So glad it helped out!
Thanks!
Tonja, Thank you so much for the Thanks! I really appreciate your support. This will go,along way into purchasing some better lighting for my videos. I truly appreciate you! ❤️
THANK YOU!!! I have so many designs on my screen all different colors output off it gets so confusing. This will help me so much. Again you saved my sanity!!!
Glad it helped! Thanks for your comments
Thanks
Thank you so much for the “Thanks” I appreciate it very much!
Good evening Robert. Goodness knows why TH-cam isn't notifying me when you make a new tutorial - I was just thinking I haven't heard from you in whats seems like an age, so went directly to your channel and noticed there are three consecutive ones I haven't seen - now excited to binge watch them :-) Alos, thanks for the email the other month, was so great to g=hear from you in more detail - I hope you got my reply?
Well, what can I say OMG, I waste so much time flipping the outputs on and off, and changing layer colours time and time again, and sometimes so much that I make mistakes! This is AMAZING news, and I will start using this right away. I cant believe I never even noticed these features Robert. thank you so so much, it is going to be such a great time saver. I learn something new from each and every tutoru=ial of yours, and I also use them as reference later down the line when im struggling with something. I absolutely love this
I hope you and your family are well, and enjoying the small steps back to normality that we seem to be enjoying at the moment. Im absolutely loving my laser, and a lot of that is down to you
Terry
my wife and I where just talking about we haven’t seen any post from you and was hoping you where ok. so glad to hear from you! I did get your response so thank you for that. I appreciate your comments as always. stay in touch my friend. here is to safe lasering.
Thank you very much for a very detailed tutorial.
You are welcome!
Thank you! That is very helpful information. I was thinking that is how this setting worked, but I kept getting that "nothing selected" warning. This explains why. At first I thought "cut" meant for the laser to only physically penetrate all the way through the material, not encompass both "cut" and "engrave" in one setting. That makes the label kind of confusing for beginners. Maybe Lightburn should rename this setting to "process all selected items," in future updates, in order to prevent confusion? Just my two cents. Lightburn is Amazing software, and fun to use. Thanks again for the information, and keep up the great work! 👍👍
Yes I was taken buy this as well ther was a cut mode a long time ago but recently
Your videos have helped me so much! I appreciate you!
I'm so glad!, thank you for your comments
Thanks! This was very helpful. ❤️
Glad it was helpful!
I am just getting around to understanding Origin settings. This tutorial is spot on! As usual, I have to go through a tutorial several times to get the details implanted in my head. Do you usually leave Cut Select Graphic and Use Selection Origin on when designing your file? Tomorrow I am going to research your tutorials for one on understand Optimize Cut path. Thanks to you providing details that I could not find elsewhere. Lucie
I so appreciate all your comments. Thank You!
Great video. Just what I was looking for. I will need to change my workflow because currently I am sending files to my Longer Ray 5 using wi-fi, but Lightburn doesn't talk to the Ray 5 over wifi (out of the box).
Glad it was helpful!
Again you have talked about a feature that I did not know about until you made the video. Thanks for the info. I am looking at buying a 40w (diode) laser so that I can cut thicker material. I have a 3918 cnc and dont want to buy a seperate machine, but do want be able to cut.
Thank you for your comment, good luck with your diode laser.
love the new audio!
yes big improvement, thank you for noticing!
Thank you!
When I design multiple items, I will stage the designs /duplicates/reference notes outside the grid .....then they don’t get sent to the laser😎
Love Lightburn
Thank you for the comment, I do the same sometimes. you are right! LightBurn is great software!
Thanks a bunch for this info.. It was just what I was looking for 👍
Glad I could help, Thanks for the comment and watching!
this is fantastic! Thanks
You're very welcome!
Great tutorial. Thanks
You're welcome! thanks for watching
Great video !!!
Glad you enjoyed it
Thanks! What is the function keys you were using just to select the c or just the text?
I directly select the object
I use this method all the time and find it great for positioning on scraps. Will you be doing a review of your new Nova 35 please?
thanks for your comments, I will be doing one I just wanted to get a little time on the machine before I do my review. I love it so far.
Good Job again
Appreciate the comment!
Robert, Can you do a video showing how you would engrave inside of a deep tray (with 4" Lens) using Origin to avoid having a head crash? I can't figure out how to do this.
I’ll add it to my suggested topics Vikki, thank you! thanks for watching
If your "Start From" setting is set to Absolute Coordinates, and assuming the material has not been moved, what is the value of Use Selection Origin? One would think using absolute coord. eliminates this selection from considerations. Thanks.
Yes you are correct, just hate using absolute coordinates, (personal pref I guess). Thanks for the comment and watching
I like reusing scrap material, so I never use absolute coordinates. I want to position my laser head where my material will accommodate the job and press start.
I have 60 watts omtech with autofocus and I have an issue when I try to make a circle the machine made an oval Do you have any solution?
I’m sorry, I don’t know anything about that brand.
You never covered CUT SELECTED GRAPHICS. My laser runs but does not put out enough power to even engrave (like its doing a simulated preview) how do I tell it the power and speed when I use this? :( I am using a 10w LongerRay 5
This process is intended for co2 lasers not diodes. Sorry
Hi friend, I have zero knowledge on laser cutting machine. Due to my work required I have purchase an ATOMSTACK XPRO and try to mark some numbering on electrical wire surface, just to mark some letter like ACHGF 12344566 and so on.
I wouldn’t use a laser to mark on electrical wire. it destroys the insulation.
Hi any chance you can make a video how to make a cake topper please, thank you and also i love your videos
what kind or style of cake topper are you looking for? thank you for your comments I appreciate it!
good grief all you have to do is "cut selected graphics"
yep that it!
I did that but it still don’t cut out the center of designs that have cut outs It’s like you got to do each layer. Tell her what to do then the laser does so much then at homes then you got a click on the next button. It’s crazy. I thought you can group everything and click on black for cut, but it don’t work that way I’m still having problems.
Thanks!
wow, I really appreciate the “thanks” I will be using this money for some upgraded lighting for my videos. I’m truly humbled.
@@computercreationz Your videos have been very helpful to me. Thank you for taking the time to make them. I appreciate you!! ;)
Thanks!
Thank you very much. I appreciate it!
Thanks!
thank you very much for the donation to my channel, it really helps