The NEW Lightburn Software Cut Settings Editor!
ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2022
- ➡️ Click on Show More↙️for the LASER RAFFLE and other Links!
The LaserMATIC 10, 20 & 30W: King of the Diode Lasers!
➡️ rolyautomation.com/lnJ4A7
The LaserMATIC 10, 20 & 30W are now IN STOCK!
The Roly Automation Facebook Group:
/ rolyofficial
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
www.amazon.com/shop/thelouisi...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutfiles.com/
/ lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Need to message me? m.me/105768145045320
Check me out on Rumble! rumble.com/c/c-3325164
=======================================
👉EXCLUSIVE $200 Discount Coupon on the Gweike Cloud Co2 Lasers!👈
If you're looking for a Co2 laser, use my exclusive discount code!
This code is good on all laser website purchases at www.gweikecloud.com/
➡️ Coupon Code: LAHOBBYGUY
(Coupon code not valid on pre-orders of new products)
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com/magnets
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com/4standoffs
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com/bedlegs
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
=======================================
THE MOST REASONABLE DIODE LASER COMPLETE PACKAGE AVAILABLE!
👉 This is a special VIEWER ONLY package deal!
🔗 lahobbyguy.com/package
Laser, Roller Accessory, Enclosure & Honeycomb Bed! $465!!
Take an ADDITIONAL 7% OFF with
Coupon Code: ➡️ HobbyGuy
=======================================
I want to give a BIG SHOUT OUT to all my viewers who are supporting me in this effort! Thank you SO MUCH for your support!
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/lahobbyguy
=======================================
Need to mail me something?
The Louisiana Hobby Guy
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com/lburn
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com/lb-keys
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ The Walnut Road Collection of high grade USA grown and CNC'd hardwood coasters:
www.walnutroadcollection.com/...
info@walnutroadwood.com
➡️ Use Coupon Code HOBBYGUY for a 25% discount!!
➡️ Ocooch Hardwoods:
ocoochhardwoods.com/
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/44TfKGdByI9o
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic10 #ortur #orturlasermaster2 #lightburn #tutorial #Atomstack #Aufero - แนวปฏิบัติและการใช้ชีวิต
![[TH] VCT Masters Shanghai Playoffs DAY 5 // 100T vs PRX | FUT vs TH](http://i.ytimg.com/vi/q75pv359eP4/mqdefault.jpg)
I haven't opened Lightburn for a couple of days, the wife was in the hospital. So this was an eye-opener as soon as your video started I download the new version so I could follow along. I'm really glad you're on top of things for us. 😁 Thanks for the video!
Sorry to hear that George! I hope she's getting better! 🙏
Thanks for the video. As always very helpful. I just updated to this version of Lightburn. Looking forward to the next one.
Glad it was helpful Douglass! I'm always looking forward to the next one!
Thanks for the heads up about the light burn update. I’m not really into change so this will be good test. Thanks for everything you do.
Any time John! This is a good one!
Oh man! Thanks again Rich for covering that topic on this new feature! Looks to be a solid improvement!
You bet John!
About time they added this feature...I love it!!!It's going to make things MUCH more easy for me...Great video Rich...Have a god one!!! Lightburn rocks!!!
Glad to help Gerald!
This is why my notification 🔔 is always on , been ill with covid and not been near my laser for about a week and never knew about this latest LB version thanks again Rich 👌🏻👌🏻
Thanks Stuart, I hope you get better soon!
Hands down, You seem to be the go-to-guy when about to recieve one's first desktop diod laser engraver - as I am. Keep up the good work!
Wow, thanks!
Thanks Rich I noticed the update today and thought I would wait until I learned more and now i have thanks to you.
Glad to hear it WIlliam!
I watched your video on Lightburn the cut settings editor thanks for the little tutorial. Very good explanation
Glad it was helpful Sam!
Great job as always Rich. My favorite videos are of you teaching Lightburn. Have a safe Independence Day. Cheers!
Thanks, you too!
Hi, Rich, I'm so glad I came across your channel! I'm fixin' to do my first laser test and your video is really helping me. BTW, I was born in Metairie, lived in Kenner, Waggaman, Luling, Albany and Hammond growing up, graduated from LSU (lived in BR), moved to Utah, moved back "home" for a few years in Watson, and now I'm back in Utah. It's fun to watch videos of someone with same accent as my family back home. :)
Wow, a bunch of travelling there! I was actually born and raised in the country in NY, but I have a coonass passport now 😎 been here going on 41 years now!
New to lightburn, Glad I came across your videos. Easy to follow and understand.
Welcome aboard!
Great Video Rich, My favourite update is the linking of Library Cut Profiles, Makes it so much easier when you make a quick change, due to laser not seeming so powerful, or maybe the plywood is a little tougher to cut than other sheets, and voila, all other existing projects, have automatically been updated.
Glad you liked it, thanks!
Thanks for the tutorial, Rich. I had asked you about this exact update issue under a different video, yesterday. I am glad you made a whole tutorial about this update issue. I was "temporarily" getting around the issue this morning by duplicating text and creating two separate layers. One layer for "fill" and the other layer for "line." Then just overlaying the line layer over the fill layer. This "work-around" requires a few extra steps, but it worked great. However, I like being able to create multiple steps in one layer now after the update. Way cool! 👍
Yes Sir, you were the inspiration for the video! 👍
I actually listen to my subscribers....
@@TheLouisianaHobbyGuy Awwwww, gee thanks, Rich. I am touched. 🥲
@@TheLouisianaHobbyGuy Yes you do! 👍
Love your forum. Lots of excellent information.. Thank you for the videos
Glad you like it William!
downloaded the upgrade. thanks for the video. this will save time and be so much easier
Glad it helped Francis!
I'm grateful for you !! Thanks again!
Thank you for watching Kennie!
Love this feature - thanks for explaining !
Glad it was helpful Cheeks!
Excellent and thanks for the guidance, much appreciated as I too was wondering about this :)
You're most welcome Bryan!
LOVE this upgrade!!!
Me too!
Been watching you for a while, since we got this CO2 laser. Your channel is THE BEST. Thank you SOOOO much. I love your tutorials.
Wow, thanks Derek! I appreciate the support!
@@TheLouisianaHobbyGuy , I am new, and this is probably a simple calibration mistake, but my CO2 laser seems to only make good prints at about 4 or 5 cm from the nozzle. More or less than that seems to spread the lines. What am I missing?
@@derek2593 It has to be perfectly in focus. You can check my diode laser video on a ramp test. It will work on a Co2 as well.
@@derek2593 th-cam.com/video/sfGlZGhh144/w-d-xo.html
Very informative! Thank you for sharing.. It is a neat improvement!
Thanks for watching Mike!
Thank you very much for your video. It's very helpful.
Glad it was helpful Diep!
Once again a superb demo Rich, especially for a newbie like me .... day two actually :)
Thanks Mike! Welcome to the obsession!
🎉🎉Hallelujah,🎉🎉
the program is running, and all thanks to you, Mr. Rich.
You are a really great guy👍👍
Wonderful Salam! Glad to hear it!
I finally joined the forum! This is a great update - I can’t wait to mess around with this!
Welcome aboard Michael! I've been messing with it all day!
@@TheLouisianaHobbyGuy that’s the biggest thing about starting something as a hobby and then turning it into a real business - I used to be able to play around and enjoy the process of tinkering, but now I have to worry about consistency and keeping the machines running. I started out as a CNC woodworking business, but I got a customer who needs laser too, so I added one to my arsenal. I love it, but I never get to actually experiment the way I’d like too. No time!
@@michaelkeymont501 That's a good thing!
Great video like always, thanks
Glad you enjoyed it Juan!
Great video Rich...🤘🤘🤘
Thanks 👍
thank you another great video. I think I write down 4 or 5 hot tips when watching.
Wow! Thank you so much Joe! I appreciate that!
so one layer with all the functions in it, i can do my etch then cut.....hold on top of my head came off, great video rich, going to the shop to try this right now. cheers
Get to it Jim! 🤪
Thank you very much good man, I will try with them and let you know the result. 👍
No problem Salam 👍
What a great update
I'm loving it David!
You lead an amazing community.
Thank you for all the help.
My pleasure! Thanks for watching!
Hey Rich, how are you? This option is very cool. Without you, we would not have known. Well done, expert.100%👍👍👍
Hey, thanks Salam! But you would have seen it!
I thought a new video would come out with the update, I did download it but got to busy doing other things in my workshop, but that one on one chat session sounds like a great idea, and I think I may just have to use it one day, just a matter of timing with different time zones
Sounds good Ian!
Another great video thanks Rich
My pleasure!
Thanks, as ever an informative video.
Glad it was helpful Steve! Thanks so much for the support!
Great new stuff, I will be happy when they add a generic machine to the list for stand alone CNC table with a laser option. It means to have save gcode with the power setting already in so I don't need to run a conversion package, after saving in Lightburn.
Agreed! 2D CNC is in the works.
Seems harder to make sure you know what you are doing. I liked all the colors showing the procedures. I'll give it a try. Glad I kept the previous version. JMHO
A lot of people feel that way about all new features... until they learn them!
Thanks!
Thanks for the support Walter!
And I thought I was doing something wrong. This is great.
I'm loving it Merrill!
Rich, as always thanks for what you do. With out you help guys like me would struggle with some of this.
I'm wondering if instead of explaining on a square you could explain what this means on a project?
I'll be covering that in future videos Michael.
Thank you Rich. Time goes fast and now we have 1.4 version of LB. Im trying to find the same settings and seems to be a little more challenging for me. I don't have angle settings in my version so I can choose of laser scanning. Its just me or my version of LB is deferent. Can you do please same stuff but on a newer version. Thank you
The scan angle is in the Cut Settings Editor Bob. Just double click a layer and you'll see, Scan Angle (deg). This is what determines the scanning. The default is 0.
You the best, thank you.
You're welcome Nazgull! Thanks for watching!
Great video as always, could you point me in the direction of the defaults= make default/ for all, which one?
Double a click a layer Andy, and at the bottom of that window is the Make default for all button.
Like to thank you for the making money by personalizing pencils and other items video. I built a jig for 10 pencils at a time and in the process of engraving 300 pencils with the grand kid’s names.
That is awesome James! Glad to hear this!
Thank you sir
Thanks so much!
Rich, please consider a new video about the 1.2.04 version of the Cut Settings Editor. There are several new settings that are not explained in the official lightburn software documentation. I made the same request on your LAHobbyGuy forum.
Not yet Steve... I have the Beta version of 1.3, so after that's released to the public.
Hi Rich this may not be the correct spot to ask but I may I say I love your tutorials and they are helping me out heaps because they are made so the average person can understand them which is great. I have been trying to find with no luck anything you have for after you have designed what you want I would like to be able to add text and bend and shape it to whatever I want it for ? eg like in your coins ? I just want to be able to draw things like chopping boards and then be able to bend all the lettering to suit me needs? I have a Black and Red 80W chinese and obviously I us lightburn. Thanks heaps I appreciate your help Cheers Ian
Select the text and look up in the top corner. You'll see a little blue circle. Click and drag the circle to ben the text Ian.
Nice.
Thanks!
Thank u lightburn
Yes indeed!
First, thank you for always keeping us updated Rich! But if I now interpret correctly, then I can all my previously created with the old version and saved files, revise again, since the previously used "options" are partially no longer exist? What will be a blessing for some with the update, is for others probably rather a curse. I will probably rather make no update and continue to work with the old version.
No, only the Line + Fill layers need editing on older files. Everything else is the same.
@@TheLouisianaHobbyGuy Thank you Rich. Then I will do the update, because with line and fill I don't have too many files.
From the documentation: "Loading designs that use the Fill+Line mode will automatically convert them to a pair of sub-layers, with a Fill followed by a Line pass"
So you should be able to just open up your previously edited files and they will work with the new settings.
@@andrecanis4894 Thank you for the information!
Rich your videos are great but I am needing help with some things on my laser for one it won’t start for two if it start it shuts down during a job and I also noticed my door has never completely shut and I didn’t know if that is a issue if you have any heads up on the stuff please let me know thanks
You're going to have to contact the manufacturer for those problems Linda.
Hola!!!! Excelente Video!!!! Muchas Gracias!!!!! Saludos
My pleasure Joaco!
This was sooo helpful. But I'm still a bit stuck on something. I downloaded your library before the update. Now, when I go to try and do a "universal test", the mode is greyed out, and set to "fill". If I click to unlink, then all the values are the same...I'm assuming because the original wasn't formatted in the sub layer version. Is there a new universal key I can download? Or just delete and the download again? Or do I have something selected somewhere I need to uncheck?
The UTC isn't affected by the new version with sub-layers Shari. They're only linked if they're loaded from the library. All older files still work the same. Maybe you got a bad download.
I wish they’d add a skew/taper function for tapered items on the rotary.
Have you suggested it on their website?
@@TheLouisianaHobbyGuy multiple times, even used their suggestions area as well as voted on other’s suggestions regarding the same function. This just seems to be something that they are ignoring unfortunately.
@@OffGridOverLander They ignore suggestions, it just takes time to implement them.
hi rich another great video how does it work with the cut library when in multi layer mode as when i tried to do it assigns the setting but then grey everything out and turns off air assist am i doing something wrong ???
I haven't figured that out yet.
Four months later now, and I have recently purchased Lightburn. My version is 1.2.04. My Cut Settings Editor has no sublayers functionality. Did they take it away? Or am I limited because of my device (xTool)?
Check that! It's apparently not available if the layer is an image, but it is there if the layer is an object.
Yes Sir, Steve, you got it! 👍
I see the raffle is USA and EU only. What about AU/NZ? (and others)
Great content. Keep it up.
It's not my choice Allan. The vendors supplying the prizes determine who they ship to.
In Line after Fill mode the Line outlines and highlights all the lines in the file. If you want to cutout the outer perimeter of the file it looks like you would have to have a separate layer. I ran your coin file and the first line sub layer outlined all the lines in the file as it was supposed to, but the second sub layer (which I wanted to cutout the file) actually cutout ever line in the file, destroying it. Is there a get around?
I haven't gotten that far into it with the holiday weekend William.
Hello Rich, I have an issue between my preview and the actual project in lightburn. I recently downloaded a puzzle into lightburn from a puzzle generator. The cut lines look normal in the software but when I do a preview some of the line in the puzzle pattern look incomplete (they stop at one point and continue after). Does that mean that when I cut it some lines are not going cut through?
I answered you email Axel.
Lightburn did a really good start to a new feature but I think it can use a bit of finishing or polishing of the feature. The immediate problem I had is also the library is converted to this but the old library only had 1 layer to each. It didn't seem to convert line+fill to 2 layers so they all need to be Edited.
What if a library for ease of future needs be built as a single layers library, opening and selecting a library entry with options like "Assign to layer" which exists and "Assign to selected sub layer", "Add sub Layer". Currently it seems the sub layers need to be manually built by writing down all the settings and manually applying them to sub layers. I can see a use for library entries that are multiple sub layers and some a single layer to be added to the project layer as layers or sub layers.
That was on the advisory notes for the upgrade. Line + Fill is gone and will need to be redone. There's no polishing that can be done since the feature is now replaced with a better version. I understand your pain... there are several Win95 programs I wish I still had.
@@TheLouisianaHobbyGuy That is sad! As it sits the library is fairly useless to galvo. I had to write all mine out so I had it to manually add sub layers making the library useless in some cases. The ezcad way is to place multiple identical objects on top of each other and set each with different settings, that is difficult later to see what is happening. The Lightburn way is (potentially) much better but doing so defeats the purpose of the library or creates gazillions of entries. Note that you cannot use the lightburn library for reference while you are manually entering into a working layer. So you need it all on paper rendering the library useless.
A problem I ran into many times as a programmer, sometimes is is easier to manage a smaller list of raw entries than a larger list of the massive amount of combinations the raw entries can produce. Combine that with the ability to have a few combined entries for high use is awesome. What you will find with combined entries is you often do not have the one you need for the job and have to manually modify it without being able to reference the library to do it! This gets tedious and uses a lot of little pieces of paper. It also greatly increases the risks of mistakes! We all know the possible combinations to the lottery! Apply that math to combinations of operations in lightburn, its exponential. The more possibilities the less likely there is a library entry to fit this unique job, their all unique.
The example I used is a 4 operation process to lightburn. I have used many more than 4 operations on 1 object engrave. The more operations the more combinations the more library entries until it is unusable.
My example is:
Library setup RAW Library. Single entries no sub layers or maybe a few if always used together. Deep engrave entry, Cleanup Entry, White Engrave Entry, Black Engrave Entry and anneal entry (of course many more but for the example)
Library Setup WORKING - Entries that could or most likely have have sub layers. Deep Engrave steel + Cleanup, Deep engrave Brass + Cleanup. Cleanup + mark black steel. etc...
Project - Hobby Guy - Hobby in Black, Guy in White.
Working project. BLACK Layer 00 - Assign to "Hobby" - Sub Layer 1 Deep engrave, sub layer2 cleanup, sub layer 3 black engrave, sub layer 4 anneal. BLUE layer 01 - sub layer 1 Deep engrave, sub layer 2 cleanup, sub layer 3 White engrave, sub layer 4 anneal.
Assigning the layers / sub layers would be as easy as it always has been in Lightburn, either pick from the library and "Assign to Layer" or "Assign to added Sub Layer". Then you can pick your operations and 1 button assign them from the library.
As you can see if I setup a library entry for each possible combination just with Black, White, Tan, silver and 20 different metals I'm looking at now 80 library entries. Now add anneal/don't anneal its 160 entries etc. That will easily be 6000 entries and unmanageable never mind time consuming to create and maintain with each variation. The simple way is Lightburn add the ability to assign a library entry to a sub layer. All that complexity goes away as the machine operator knows what is needed for operations. Operations that are constantly re-used can be put in as a multi entry, other operations as singles.
Its a classic and we have all seen it developer trying to make it too simple. Sometimes simple is far more complicated! The simple fact of multiple operations on a single working layer is AWESOME but rapidly becomes insanely complicated without the right features.
@@3dtwerking324 I don't know if I follow. I can still use the library the way I always have. Yes, the feature probably needs updating, but I think that will come in time. For now on my mlti tab projects, I'll just look up the values from the library.
@@TheLouisianaHobbyGuy Maybe you hit the nail on the head and I was being long winded explaining. You can't use the library as you always have since you cannot assign sub layers from the library. You have to manually assign sub layer settings from memory. You can't even look at the library while assigning sub layers to get the settings.
@@3dtwerking324 Yep, I got that! But you can go back and forth. Kind of a PITA.
How do you keep the cross hatches from engraving and only do a cut?
I don't understand.
Fill is the 1st in order of operations and cut as the second cut comes first? Any suggestions? I did not have this problem a few weeks ago. Thanks
Laser tab --> Optimization Settings
@@TheLouisianaHobbyGuy ok
I’m new to lasers. Can you laser stainless steel? Or is there a way. I have Ortur master pro. I tried my yeti and no luck.
With the LM2 Pro it's hard because of the 5W output, but it is possible. Think 100% power and 60 or so mm/min speed Ryan.
Update to my last question, they moved the print and cut feature to the laser tab on top
Yes, Laser Tools --> Print and cut
can you tell me i am having a problem sending to my laser doing a drawing 10x10 it does not send anything smaller it does as always thank you for your help
Not enough information. Try posting on my free forums. lahobbyguy.com/bb
why would my fill have jagged lines on my tumblers now since upgrading to 1.2? The file is clean (SVG)
It shouldn't. If it does, it would be a Lightburn forum question.
Maybe you can help. Using Lightburn my cut lines and circles cut then stop for a few mm then fire again for a few mm then stop again and on and on. Any ideas how to stop this?
Yes, double click the layer to bring up the Cut Setting, and turn off perforation mode.
@@TheLouisianaHobbyGuy got it. Thank you!
Hi Rich. a newbie to laser. starting to get the hang of it but still struggling with some things. I understand that trial an error happen. Using this mostly for crafting ideas. I am using 5mm ply for alot of my testing. Problem I am having is not being able to cut thru and not to BURN the wood. Trying to get cleaner cuts to no avail. l have a longer ray5/10 watt. Alot of my cut settings are 200 to 500 mm/mn at 100% power. Any thoughts or suggestions from anyone would be greatly appreciated.
You can either mask it with laser masking tape from Amazon Craig, or change your settings to cut with more passes and less power.
@@TheLouisianaHobbyGuy Thank you for that. I also took your advice n ran a bunch of test cuts on 5mm ply n think I have it figured out. Extra question…. Does air assist help make a cleaner cut?
Yes it does Craig, and there are less burned edges.
Hey Rich, the new version Ver 1.2.04 took away the print and cut and now has print in black or print in color. Do you know what this is about? Thanks in advance for your help as always
Print and cut is still there Mike.
How I can convert a design in a single line , so I can add the the same width all a round to embedded led lights
Too much for me to answer in a few words.
I've purchased lightburn a couple years ago and never knew there was a update since I already own lightburn can I get the update or do I have to pay again 🤔
You can renew your subscription service at a discount. Email sales@lightburnsoftware.com
@@TheLouisianaHobbyGuy ok thanks
Does anyone have the material library for the sculpfun s9 for Lightburn? I'm at the beginning of the journey in this domain and the settings already tested on different materials would help me a lot. Thank you in advance
Try looking on my free forums. lahobbyguy.com/bb. In the Members Only Download section, there are libraries you can download based on the power of the module you're using. None of them are manufacturer specific.
@@TheLouisianaHobbyGuy many thanks, I have registered to your forum. Is very helpful. Respect for your help and work. Keep it going.
i downloaded 1.2 but when i go into layers and cuts and double click, i see the old setup, there is no plus button to add more on images
Did you install it after the download James?
Ok, so to CUT out a shape, pic or whatever, use line? 🤔 New to lightburn but I got the engraving part down pretty good. Now I want to cut out stuff. Like small Christmas trees, pumpkins for Halloween, etc etc....
Yes, use line and set it on its own layer.
@@TheLouisianaHobbyGuy ok will try that! Thanks sir!
This is going to be cool
It is!
I’m really starting to watch your videos. Lightburn intimidated me for awhile, then I said I’ve got to get into it. I’m used to operating industrial cnc machines but never design software. Watching your video this morning also, I was able to make a multi layer design. All thanks to you Rich. Keep up the great videos
@@steveferguson1232 Thank you Steve!
Confused. How do I get rid of the spiral? I just want horizontal lines for engraving fill and the finishing line around the edges.
I don't know what spiral you're talking about. This was a layer video.
@@TheLouisianaHobbyGuy When I open panel for Offset fill, Bi-directional fill and crosshatch are unavailable. The default pattern for fill is the spiral image there. As I said above I want it to etch back and forth line by line and not in the spiral manner. Then I want it to finish with one line around the shape.
Double click the layer Vilo, and then change the Mode to Fill.
@@TheLouisianaHobbyGuy I don’t know if I speak swahili. I want fill AND line in the same action. I want to have one tab in the layer with regular VERTICAL fill and second tab with the line around it.
being certain that I'm missing something - I'll still ask the question: Where is your booking site for 1:1 training?
I had to stop doing it Mike. The channel is taking up all of my time now.
@@TheLouisianaHobbyGuy Ahhh - ok, well thanks for taking the time to reply and let me know. Love your videos - thanks for putting them out for us. Learned a lot from re-reviewing this one in particular.
Yesterday I updated Lightburn to version 1.2 and the program completely stopped working and wants to me enter the license key ,by the way I still have a period of 95 days and I don't know how to solve this problem. Can you help me ?
Thanks, my friend.
No I can't Salam, I don't work for them. But you can send an email to support@lightburnsoftware.com and get help. You can also redownload your license key from lightburn.cryptlex.app/auth/login
Hello my friend I'm from Brasil ,could you help me please, how I do to sent the file from lightburn to my controller
I really can't help you in a TH-cam comment, especially not knowing anything about your setup. I do have a forum where you can find help: lahobbyguy.com/bb/
@@TheLouisianaHobbyGuy thank you for your feedback
Hi Great video. I'm new to Lightburn and I'm having trouble with the cut settings editor. It's hiding the Tabs that you are renaming. Unfortunately I can't send a screenshot. Can you help?
You can ask and post screenshots on my free forum Mark. lahobbyguy.com/bb/
@@TheLouisianaHobbyGuy I have posted a screenshot on your forum. Thanks for the quick response.
@@markhogg1599 You left out the screenshot!
Just resent with attachment. Could it be that i am using trial version of Lightburn?
@@markhogg1599 No, the trial is the full version.
Nice Shirt
😊🤪😊
Is there a way to generate dot patterns on lightburn
Not that I know of Sam, but you can Google dot patterns and find some.
@@TheLouisianaHobbyGuy what I mean is snapmaker luban offers automatic dot fill pattern for free, wondering why Lightburn doesn't have dot fill
@@samsmucker6419 I don't know, you can ask on their forum.
How does this affect older programs?
I'm not sure yet.
@@TheLouisianaHobbyGuy I thought you are one of the testers, you mean you never opened up an old program to test compatibility?
@@jf6720 If you mean have I opened an older file? Yes, I have. I don't see any differences except in the layers.
@@TheLouisianaHobbyGuy Just wondering if we will have to change something in our old programs or will they still run the way they are?
Following this tutorial closely. After creating image, settings mimicked. Preview seems to overshoot the limits of the image (crosshairs go beyond the image boundaries, Transversal moves) Please "splain why"
Thanks
That's not traversal moves, that's over scanning. For a Co2 you can turn it off, or a diode, keep it under 4%.
@@TheLouisianaHobbyGuy thank you
👍👍👍
😊😊😊
You know since this update to 1`.2XX all my files take twice as long to perform the engraving function. Have watched so many videos BUT none address the core issue of this hatching scenario.
I set for 45 degree cross hatch in two layers yet it still begins with a horizontal hatch.
Very frustrating.
Cheers.
Have you tried uninstalling and reinstalling Jeff? I'm not having this issue. You can always revert to an older version you liked better as well.
@@TheLouisianaHobbyGuy Many times. Cheers.
With all due respect that is not a good answer.
Thanks anyway.
@@jeffhack6839 Well, I'm not a Lightburn developer! Perhaps if you ask on their forum you'll get a better answer. I'm not an expert, nor do I ever claim to be.
@@TheLouisianaHobbyGuy Never said you were. Thanks. For the help.
Wish LB would have Tabs so I could open multiple design pages at once, but not have multiple LB programs open.
That's a great idea!
meh... I have to disagree. The additional tabs in the cut settings editor may be more powerful, but this isn't EASIER for people who just want/need Line and Fill. Now, instead of simply changing one drop down, we have to go in and manually create a Line and a Fill setting. That is literally more steps which equals not easier :)
Yes, it is, but the purpose isn't to replace line + fill. I have a lot of projects that are 3, 4, or 5 different layers, and this is what it's really for.
How much is Lightburn?
@Marie Wood. Lightburn is $60 for a lifetime user license key that never expires. However, you have to pay $30 a year if you want to continue to get software updates and support. The user license allows you to use Lightburn on 2 separate computers simultaneously. However, Lightburn has been known to let you use it on 3 computers if you ask nicely. I hope this helps answer your question.🙂
$60 for Gcode for Diode & $120 for DSP for Co2 Marie. $30 annual renewal if you want updates. If you already have the Gcode version, it's only $60 to upgrade to the DSP.
lightburnsoftware.com/collections/frontpage
Why is there no translation ?
No time for translations lately, sorry. I'm a one-man show.
@@TheLouisianaHobbyGuy
Thank you for your continuous effort, but I was surprised that all of your videos contain automatic subtitles, except for this video that does not contain subtitles, and this is sad for many.
@@al.mujazef It takes time to generate the subtitles. They'll probably be there tomorrow.
Do yoy have a simple video that just shows how to cut something out. Just a basic cut proceedure. I don't see a way to cut anything, the machine just engraves. ???
You can try this one: th-cam.com/video/CwO4LTz0OWE/w-d-xo.html
Thanks!
My pleasure James, thanks so much for the support! 👍
Thanks!
You bet! Thanks for the support! 👍
Thanks!
You bet! Thanks for the support!