Vw Beetle A Pillar Replacement Rust Repair - Metal Work | 1958 Ragtop Rusty Bug Revival

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 90

  • @johnmayer158
    @johnmayer158 ปีที่แล้ว +2

    Jay,
    With Larry saying "not Larry approved " on Jenns side of the car, don't want her falling out, make sure you do a great, solid job: otherwise that may cause some serious "domestic tranquility factor issues! 😂.

  • @almclean4835
    @almclean4835 ปีที่แล้ว +5

    You’ll get better the more you do. Larry approved, love it. You need to get Larry approved stickers

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +1

      thank you AL :)

  • @dennischapman9801
    @dennischapman9801 ปีที่แล้ว +4

    Looking good Jay.

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +2

      thank you Dennis

  • @barackmycat9448
    @barackmycat9448 ปีที่แล้ว +5

    You will be a pro soon working with that expert!

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +3

      thank you, it's great working with Larry

  • @dalewyatt1321
    @dalewyatt1321 ปีที่แล้ว +2

    There is a man in this video who is super patient.

  • @Phronsias1
    @Phronsias1 ปีที่แล้ว +4

    Really intersting video's. you are doing well J

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +1

      thank you, It's been awesome working with and learning from Larry

  • @stephenricketts7764
    @stephenricketts7764 ปีที่แล้ว +10

    'Not Larry approved'. The important thing is you are learning though! I should say that my welding skills are limited as well so you have my support the whole way through. Thanks for the update Jason and thanks once again to Larry for his wisdom and letting you use his shop. 👍👍

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +1

      We thank you Stephen 👍 . Yes I am very fortunate to be able to work worth and learn from Larry

  • @volktales7005
    @volktales7005 ปีที่แล้ว +2

    Everyone could use a Larry in their lives... Great progress!

  • @MrGMawson2438
    @MrGMawson2438 ปีที่แล้ว +4

    Great video guys

  • @HubertusSchaper
    @HubertusSchaper ปีที่แล้ว +1

    Yes indeed Larry is a great teacher and Jason is absorbing the knowledge from Larry's, great video👍🏻🙏🏻☮🍀🇳🇱🇳🇴.Greetings.Hubertus

  • @tom-ehill2713
    @tom-ehill2713 ปีที่แล้ว +1

    Coming along fine fellas!!- Have a fantastic weekend..😎

  • @tomdale1313
    @tomdale1313 ปีที่แล้ว +1

    this is where the rubber meets the road, learn all you can...you can put your spin on it later, tanks for sharing

  • @robinredman5192
    @robinredman5192 ปีที่แล้ว +2

    Jason, you really need to address your Mentor like this; "Sir Lawrence, Please, May I Have Another Sir!!" Respect Jason, respect.....😅🤣😂 Brouhaha-ha. Great video and thanks y'all. John here, from the back-roads of Northeastern Tennessee.

  • @vintage76vipergreenBeetle
    @vintage76vipergreenBeetle ปีที่แล้ว +4

    I like how honest Larry is. It how you learn to do right.

  • @riverbluevert7814
    @riverbluevert7814 ปีที่แล้ว +2

    "But Larry, the first third is attached." - long pause - "Hang on" Haha great video. The car was a noodle and you're stitching it back together.

  • @toddjohnston4788
    @toddjohnston4788 ปีที่แล้ว +4

    Larry is a great guy..it's hard to weld. Especially when a parking break is in your stomach...B+

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +3

      👍....or the chassis bars , I'll take the B+, thank you

  • @huissens
    @huissens ปีที่แล้ว +1

    Oh my! Flashing back to me as a kid, doing projects with my Dad! “What do you think?” I’d say, looking for approval. My Dad, like Larry, would look… and slowly shake his head. Larry, like my Dad, has the patience of Job! He actually offered to take over, but allowed you to continue! What a teacher!

  • @RustyRogers
    @RustyRogers ปีที่แล้ว +6

    Never enough time to do it right, but always enough time to do it twice! :~D Love this project.

  • @philcappellini2820
    @philcappellini2820 ปีที่แล้ว +1

    I feel your pain with the welding. I am constantly blowing holes in my welds. I have a feeling that your going to hear "Not Larry Approved" on a regular basis. If I was you I would get a t-shirt made up with "Not Larry Approved" (maybe on the front and back?). That way you don't have to hear it all the time and Larry can just point at your t-shirt when he feels your work is not up to his standards 😀. I am really enjoying these videos .Thanks!!!

  • @stevefamfive
    @stevefamfive ปีที่แล้ว +2

    What a find Larry is for your channel! You should be congratulated on finding him and in helping him do such a good job on cam. Two distinctly different personalities make for great viewing.

  • @welshy8216
    @welshy8216 ปีที่แล้ว +5

    Not Larry Approved 😂 Made me chuckle that

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +3

      haha! that was funny, your not even attached

  • @kylemacarthur3177
    @kylemacarthur3177 ปีที่แล้ว +2

    That's passion and craftsmanship converging... Well done!

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +1

      we thank you Kyle

  • @jimstewart6145
    @jimstewart6145 ปีที่แล้ว +4

    nice job guys.

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +2

      we thank you Jim

  • @kevinhamling1963
    @kevinhamling1963 ปีที่แล้ว +1

    Larry approved that could be something to consider for merchandise.
    Hoodies with Larry approved ❤

  • @TimothyHigdonHiggs
    @TimothyHigdonHiggs ปีที่แล้ว +1

    Looking forward to the next one!

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +1

      thank you Tim, I got the last inner fender well welded in yesterday

  • @deborahmarion9038
    @deborahmarion9038 ปีที่แล้ว +2

    Love it! Student and teacher.

  • @Odawg3709
    @Odawg3709 ปีที่แล้ว +4

    Keep practicing!

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +2

      thank you, i will

  • @markj.7369
    @markj.7369 ปีที่แล้ว +1

    It will come out good. Great video as always Jason. Love the collaboration with Larry

  • @dale7436
    @dale7436 ปีที่แล้ว +1

    Larry reminds me of my father.

  • @davidgiesfeldt6650
    @davidgiesfeldt6650 ปีที่แล้ว +2

    Jay is lucky to have Larry to guide him, we all benefit from your learning! Thanks to both of you. When do we see and update on Larry’s 57?

  • @superbear617
    @superbear617 ปีที่แล้ว +3

    Thank you for showing the "struggles" along the way! What a great learning experience from a great teacher. Looking forward to the next one!

  • @bren-xmotorsports55
    @bren-xmotorsports55 ปีที่แล้ว +2

    Great series Jason, you can tell that Larry is getting more comfortable around the camera

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +1

      thank you, great to hear !

    • @glotube1028
      @glotube1028 ปีที่แล้ว +2

      We need not Larry approved sticker’s! Great series Jay!

  • @stephenport4768
    @stephenport4768 ปีที่แล้ว +3

    would love to see you test fit and show where and how to and where to and what type of weld and seam seal the floor pans in place

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +1

      Hi Stephen , I have more pan ,cross member footage coming out as well as seam sealer .

  • @christophercornetet5037
    @christophercornetet5037 ปีที่แล้ว +2

    Hell yeah Rad Dude!!

  • @MrTonyPiscatelle
    @MrTonyPiscatelle ปีที่แล้ว +1

    Damn J, you didn't have your head into the work man. That was kind of painful to watch my man. Com on you can do this !!!

  • @martyworley5427
    @martyworley5427 ปีที่แล้ว +1

    It’s a good thing that you have Larry there to make sure you are doing it right! Loving the videos keep up the great work. Looking forward to seeing the next episode on the floor pan.

  • @mikemoran8757
    @mikemoran8757 ปีที่แล้ว +1

    A for effort Jay!! Im going to buy stock in copper futures!

  • @dannyfoust3123
    @dannyfoust3123 ปีที่แล้ว +3

    Kudos to you both!

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +2

      we thank you

  • @LoneRanger-i9o
    @LoneRanger-i9o ปีที่แล้ว +1

    After seeing your rust I know mine could be fixed,nice video

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว

      yes it can👍, we thank you

  • @vwcoco
    @vwcoco ปีที่แล้ว +2

    Doing well Jason not an easy repair especially the angles . Thanks larry for the tips

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +2

      thank you Coco

  • @meetjohndoe1078
    @meetjohndoe1078 ปีที่แล้ว +2

    poor larry lol! those that can, do! those that can't, teach! Larry CAN! LOL!

  • @chriswilkinson1991
    @chriswilkinson1991 ปีที่แล้ว +2

    Great stuff guys

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +1

      we thank you

  • @pstreetgarage7304
    @pstreetgarage7304 ปีที่แล้ว +1

    Great video you guys are hilarious together. !

  • @omarbarrantes6671
    @omarbarrantes6671 ปีที่แล้ว +2

    Esos carros hno son un tesoro el solo hecho de verlos en abandono da tristesa ..muy bien por las restauraciones campeon uno mas para su coleccion pero me imagino q los amigos se enamoran de sus carros y se los van comprando m gustaria saber cuanto vale uno de esos en eeuu

  • @josephperry6822
    @josephperry6822 ปีที่แล้ว +2

    It's great to see more progress! Even though Larry doesn't approve of some of the work, I'm sure it will be decent enough to be safe and better than a lot of the garbage repaires we've all seen other people perform!

  • @christofour217
    @christofour217 ปีที่แล้ว +3

    Larry is so cool. has he sold the 65 vert yet?

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +2

      :)....not yet, hasn't listed it anywhere

  • @johnsadventures6783
    @johnsadventures6783 ปีที่แล้ว +2

    You take an old Walmart building and Larry, Mustie1, Jason, and a few more and a volkswagen reassembly plant is born. The blooper reel on this would be hilarious. Not Larry approved. Hmmm. You need bumper stickers with that. " Not Larry approved "

  • @paulatkinson2849
    @paulatkinson2849 ปีที่แล้ว +1

    Ur getting there 👍

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +2

      some metal going in finally :)....only took me 4 years lol. ( and Larry😎 )

  • @gavinspencer1796
    @gavinspencer1796 ปีที่แล้ว +1

    Poor Larry. This must be his penance for bad things he may have done in a previous life 😂😂
    However what better teacher could you ask for. The man is a perfectionist and produces excellent work.

  • @BillySBC
    @BillySBC ปีที่แล้ว +2

    I think on a lot the stuff for these cars you could actually MIG Braze the panels instead of MIG Welding them. Mig Brazing is lower temperature so you get less warpage and the bond if very strong.

  • @Air-CooledAdventures
    @Air-CooledAdventures 10 หลายเดือนก่อน +1

    If your mentor isn’t breaking your balls hard the whole time, are you really even learning anything? 😂 You’re fortunate to have a Larry. Great video, guys.

  • @Mikefngarage
    @Mikefngarage ปีที่แล้ว

    IM pretty sure the inner panel was never welded from the factory. just the edge around then the inner panel was made to strengthen the section. there is a place to weld it from near where the running board mounts.

  • @Lucas_Tulic
    @Lucas_Tulic ปีที่แล้ว +2

    You can sense the pain in Larry when he looks at Jason's welds! 🤣🤣🤣#NotLarryApproved

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +2

      😆🤣😂😭

  • @garypannone7755
    @garypannone7755 10 หลายเดือนก่อน +1

    How do you weld the inner if the outer is not rotted?

  • @maverick4177
    @maverick4177 ปีที่แล้ว +3

    Being good at grinding is as important at being good at welding 😂

    • @cruzerfj4060
      @cruzerfj4060 ปีที่แล้ว +1

      I absolutely concur. I have laid a hundred great beads just above or below the apex of the angle that didn't connect anything.

  • @MrGMawson2438
    @MrGMawson2438 ปีที่แล้ว +4

    Time for tea in England but you Americans call it dinner

  • @Emperorprime
    @Emperorprime ปีที่แล้ว +3

    gr8 video series you guys are doing!
    Im pretty surprised about welding the inner A-Pillar to the heaterchannel, never heard about it in my 15 yrs doing vw bugs or had any being attached when removing the old ones. is that factory? Either way, it's a really good idea! makes me kind of worried, I have not done that on any of my bugs :O

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว +3

      Larry says the inner A pillar is not welded from the factory as you have no access to it. He does it to add strength , especially on a rusty car....only if u have access. He says you did just fine, all is good .

    • @Emperorprime
      @Emperorprime ปีที่แล้ว +2

      @@5150mxVW awesome! Give him my thanx! And have a gr8 weekend J! Love watching your videos!

  • @Wil_Liam1
    @Wil_Liam1 ปีที่แล้ว

    Put down the welder,take 2 steps back and nobody has to get hurt here Jay...😮

  • @uffegud
    @uffegud ปีที่แล้ว +1

    👍👍👍👍

  • @MrGMawson2438
    @MrGMawson2438 ปีที่แล้ว +2

    Hello guys

  • @robertwilliams1147
    @robertwilliams1147 ปีที่แล้ว

    You put steering wheel in wrong hole ha ha😊

    • @5150mxVW
      @5150mxVW  ปีที่แล้ว

      haha, it happens :)

  • @MrGMawson2438
    @MrGMawson2438 ปีที่แล้ว +1

    😆

  • @mikegarrett861
    @mikegarrett861 ปีที่แล้ว

    Try Some "JB WELD"......Lol

  • @uggadugga8070
    @uggadugga8070 ปีที่แล้ว

    I think you needed to turn up your heat! Your "buzzing" sound was not smooth...