I like it very much when someone sees the options available to repurpose components of a broken item. Most people would throw the broken jack in the garbage without even thinking about what the intact items could be used for. Nice job. Keep up the good work and thanks for sharing!
So True! The 50 cent jack is damaged and no longer safe or useful for it's original intended purpose, but the machined components within are still in excellent condition. Those components would take hours to machine and produce and they would probably cost you $30 to $40 to buy, if they were available. Very creative re-purposing and a very useful addition to a work bench.
Chris Graham - I just remembered that a few years ago my wife’s old car needed a replacement scissors jack. I picked one up at the nearest automobile salvage yard for $5. So they can be readily acquired for an inexpensive price.
Thank you for editing out the grinder noises!!!! I don't know if anyone has ever mentioned your editing but it takes forever and I truly appreciate it!
Hello. My name is Hoang. Your idea is so unique that it can help in work and life. It's great for me. Thank you for sharing. I believe many people like it. Wishing you happiness & success always.
Sometimes I watch YT videos and fast forward to the end because I just want to see how it ends. But your videos are more fun to watch all the way through because I like to see HOW you get to the end. Plus, you know when to FF the video and when to slow down. One thing I would add to your idea, and that is to make several kinds of tabletop accessories to hold different things. The wooden pegs you made are fine, but different (I will call them holders) holders can be fitted into the holes and custom made for different shapes. Additionally, I would not have made them out of wood, because I can see where they could shear off if you tighten too much.
hahahah I guess we all were kids once - - skip to the ends of our story books just to find out how the story ends......and then summarise from there! haahah
The wooden 'Holders' (shown in this particular instance) are basically known as 'Dogs' in woodworking. At least that was what trade woodworking during 4 years of Jr. High and High School taught me. A 'Holddown' uses the same holes as a 'Dog' but fit ecentrically so that they dont slip. Of course trade anything in school is now a thing of the past, and anyone wanting to learn a real trade has to go to a specific "Vocational" school outside of the Jr. and High Schools. I took both wood and metal shops in school. At least I know which end of a chisel is used to cut, and which end of a screwdriver drives. And that if a nut won't fit a bolt it's possible that one or the other is 'left hand' thread, and if you turn the nut over it still won't fit the bolt. I had a 'stupidvisor' tell me to try that once - he had a BA but lacked common sense and common knowledge. I told him to try it and see if he could get it to work because I knew that it wouldn't. I believe we are all being 'dumbed down' in our society, in EVERY aspect of life. *****A bench dog is an accessory used on a woodworking workbench to allow clamping of wooden items while being worked or planed. Dog in general is something which holds. At its most basic a bench dog is simply a peg which is installed in a corresponding dog hole in the top of a bench. Wikipedia****
Some people are born gifted, the rest of us mere mortals just copy! Well done mate. I'm not going to make it he same one as you made but I have several of those cheap jacks in a box and I need a jack for my drill press so that's my next project. Cheers from Perth Australia.
I love your video tutorials, getting to the point and not lengthy ,especially when you fast forward so viewers can get the idea and no voice over. Great job.
This is good if you have the tools to make the project. We had benches that had all this in Jr high shop. High school shop also had benches with the holes and metal inserts. I like the wooden inserts but you must have rock Maple or other hardwood.
safety and prep.,good sharp tools, clean worksite, No music, (only that of a tool ), efficient use of damaged article and most of all, Creativity. good workmanship. Thank you. subscribed. Peace and Truth will prevail. :)
I’m all for the faithful replication of someone else’s idea but he needs to be referenced. Neil Pask made this (almost exactly) a while back on his channel Pask Makes. He’s a really great guy and I’m sure he’d be happy to know someone else tried his idea.
Creative imaginations and skills are fostered through the trades and doing things with your hands. This is why you don't give up Manufacturing. This mans skills could be used in any manufacturing, machine, or wood shop.. Thanks for sharing.
Ước gì hồi nhỏ mình được xem những Clip này, có lẽ mình sẽ chọn làm thợ cơ khí, thợ mộc dân dụng, hay cao hơn là học giỏi để trở thành kỹ sư cơ khí, chế tạo máy, điện, thì có lẽ hợp với mùnh hơn!? Vì mình vốn thích kỹ thuật và có khiếu sáng tạo từ nhỏ mà!
No! Not the same kind of vice setup. You can't use the vices he had for large pieces of wood. His new design can accommodate for much larger pieces. Extremely useful for sanding the surface of a small table top as an example, but imagination is the only limit. Totally valid question though. 😃
How interesting it was that you produced such a product from Jack Machine. We saw a very interesting idea in this video. We are waiting for your next educational videos.
Why don't you show the end result right at the start so people can see what the end result is? Then they can decide if it's worth watching, to see how to make one. Good work though!
Usually people like to watch the process of work itself and a little intrigue adds interest! For those who care about the end result you can use the rewind function )
I'm with you Paul. It's "click-bait" to make you watch the whole video. I just jump to the end to see what the hell it is, then decide whether I'm going to go back and watch the build. Too often I've watched someone's build, only to find that their build doesn't even relate to the tile of the video and what they are building has no interest to me, or what they built is just crap.
Снизу, под фанеру сделай из тонкой фанеры или кусочка пластика, или тонкой металлической пластины нащельник, чтобы в пустоту профиля, где резьба не попадали стружка и опилки. Можно даже не крепить, просто сделать так, чтобы эта полоска всегда перекрывала получившуюся дыру в столе.
The two dislikes are from people that are just salty they couldn't do something like this. Great idea , great execution, and it certainly looks like it serves the intended purpose.
I've done my share of fabricating so on that note my hats off to you. The part I laughed about was the level of skill it takes to perform some of the fabrications. (Things done by hand) not everyone's going to be able to do it.
Anyone can learn these skills. All it takes is a DESIRE to learn. No one is born knowing how to use a welder or other machine equipment. It's all learned. For the people out there that can't do this, I feel that they just haven't TRIED. Haven't given it an honest attempt. Yeah, you're gonna ruin a few pieces on your way, but that's ok, that's how you learn. There was a time in our country that ALL men were handy. You had to be in order to survive. Now, less than half the population can change a flat tire on their car. Is this a societal problem, or a skill problem?
8:16 есть тиски они то же самое могут делать!!! Еделал то что у тебя уже есть??? зачем??? просто приделай к подвижной губке упор который будет выше стола
Don’t listen to the haters, great video, love the intrigue, keep up the good work. When the thumbs down critics make their own video, then they comment! Easy to criticize, harder to come up with your own ideas.
Really nice video. No crappy music, no endless nagging to subscribe. Great idea, I wish I would not have thrown my old ones out. I enjoyed the video, great job!
Автор молодец. Отличная идея и отличная реализация. Многие могу сказать, что можно купить специальный стол, и тд. Да, можно. Но это дорого, и не всегда есть возможность сразу понять, что нужно. А автор по сути, сделал именно то, что надо ему. Молодец.
Excellent video. Very creative use of something that would otherwise end up in a dump. Also, thank you for being kind to the late night watchers by muting your power tools. It makes viewing your content much more pleasant.
impressive, he built a carpentry bench in the style we used in carpentry class circa 1950. and hand wood planner which I have used and know how to use. his work is so well video as well. love them thanks
An ingenious idea. Certain things surprised me though : your use of apparently low quality wood - it looked like ordinary 2X4 lumber stock ; your use of Forstner bits in a hand held drill and drilling from both ends rather than a straight through bore.
@@abdulkek4821 Yes of course. My point was the use of Forstner bits in a hand held drill which can give your hand/wrist a nasty jolt. Secondly the purpose behind Forstner bits, intended for use in a drill press, allows precision of depth of penetration, allowing the point only to pierce the bottom of the hole. The piece is then reversed and the bit inserted in the hole, allowing a fresh cut from the other side and avoiding the splitting you mention.
While wearing gloves, no less!! So much stuff here where he's not being too safe.. I can't watch anymore.. cant support the viewer numbers with his unsafe practices. Someone will follow his ideas and cut off fingers..
fantastic idea! I enjoyed it a lot! I think myself : Wouldn't there be a possibility to fit a plastic lid inside of the mechanism so that the wood chip/wood dust to get in ? I wonder it is a bit difficult to keep its compartment clean. What do you think about ? Anyway, your job is perfect! Congrats!
ممتاز جدا عقليه جميله الى المزيد من الابداعVery excellent, a beautiful mindset, to more creativity and suspense, waiting for more amazing videos والتشويق منتظرين فديوهات اكثر روعه من ذالك
I'm carpenter - joiner - cabinet maker & it's really difficult to correctly clamp a piece so close to the blade. If you are concentrated at your job & if nobody comes to disturb you, there's no problem.
@@NPC-157-e7r It was a solid piece of unistrut ...not all unistrut has cut outs in it some are solid and then you flip it over and the edges are curled in... like unistrut...👀
That's what you got out of this video ? Weird. I can tell you why I would, because I don't want dirt all over my bench. Metal I can pick up with a magnet scoop, dirt not so much.
Really? This showed a horrifying abuse of tools. Never trust anyone who uses a precision measuring instrument to score a line or has no clue about how to use a round file or how to use a grinder or bench saw safely.
One time out of fifty I am glad I sat all the way through one of these videos. This was that one. Incredibly well thought out and remarkably accomplished. Thanks for expanding my mind.
Ecvellent idea and Craftsmansip OMO you can never have too many clamping or Vises in a Workshop 16 years ago I suffered a Traumatic Brain Injury that paralyzed one of my hands and part of that arm so these days as a retired Woodworker i am always loooking for creative and inexpensive ways to clamp my projects around the workshop to be able to work on t with my good hand it was hard to tell in the video did you make your Dogs out of Maple ? That happens to be one of my favorite Species to work with and use because of its overall Strenghth and next to Cedar I find Maples smell to be quite pleasing to my nose
Friends, I hope you like this idea and its implementation!
Very ingenious, turning scrap into useful items.
Always interesting to watch. Thank you for working with your hands and recycling, repurposing, and reusing.
Very cool. Thanks for your videos. Your much more clever than me .
Отличная идея!!! Молодец!!! И как рождаются такие идеи?!
Like a boss!
I like it very much when someone sees the options available to repurpose components of a broken item. Most people would throw the broken jack in the garbage without even thinking about what the intact items could be used for.
Nice job. Keep up the good work and thanks for sharing!
So True! The 50 cent jack is damaged and no longer safe or useful for it's original intended purpose, but the machined components within are still in excellent condition. Those components would take hours to machine and produce and they would probably cost you $30 to $40 to buy, if they were available. Very creative re-purposing and a very useful addition to a work bench.
same. esp. with safety first, proper tools,ingenuity and of course a broken article. peace
Chris Graham - Harbor Freight has a scissors jack for between $20 and $30 IIRC on the price, plus they always have a 20% off coupon
Chris Graham - I just remembered that a few years ago my wife’s old car needed a replacement scissors jack. I picked one up at the nearest automobile salvage yard for $5. So they can be readily acquired for an inexpensive price.
I agree, but his gloves are way over due... 8-)
what can I say here 10 points
and I definitely have an old jack lying around somewhere.
thank you for this good idea and for sharing it with us.
Thank you for editing out the grinder noises!!!! I don't know if anyone has ever mentioned your editing but it takes forever and I truly appreciate it!
*Unvorstellbar einzigartig!*
Wenn die NASA über solche brilliante Technik verfügen würde, wäre der Mars schon längst von Menschen bewohnt !
Makes me miss my garage and working with my tools. Great creativity.
Your name is familiar, I can't quite put my finger on it
Hello. My name is Hoang. Your idea is so unique that it can help in work and life. It's great for me. Thank you for sharing. I believe many people like it. Wishing you happiness & success always.
Sometimes I watch YT videos and fast forward to the end because I just want to see how it ends. But your videos are more fun to watch all the way through because I like to see HOW you get to the end. Plus, you know when to FF the video and when to slow down. One thing I would add to your idea, and that is to make several kinds of tabletop accessories to hold different things. The wooden pegs you made are fine, but different (I will call them holders) holders can be fitted into the holes and custom made for different shapes. Additionally, I would not have made them out of wood, because I can see where they could shear off if you tighten too much.
I watch the Handcraft videos by getting to the end. only because I don't know what he's making.
I usually skip to the end first to see what's to be made; and then watch the build afterwards.
hahahah I guess we all were kids once - - skip to the ends of our story books just to find out how the story ends......and then summarise from there! haahah
The wooden 'Holders' (shown in this particular instance) are basically known as 'Dogs' in woodworking. At least that was what trade woodworking during 4 years of Jr. High and High School taught me. A 'Holddown' uses the same holes as a 'Dog' but fit ecentrically so that they dont slip. Of course trade anything in school is now a thing of the past, and anyone wanting to learn a real trade has to go to a specific "Vocational" school outside of the Jr. and High Schools. I took both wood and metal shops in school. At least I know which end of a chisel is used to cut, and which end of a screwdriver drives. And that if a nut won't fit a bolt it's possible that one or the other is 'left hand' thread, and if you turn the nut over it still won't fit the bolt. I had a 'stupidvisor' tell me to try that once - he had a BA but lacked common sense and common knowledge. I told him to try it and see if he could get it to work because I knew that it wouldn't. I believe we are all being 'dumbed down' in our society, in EVERY aspect of life. *****A bench dog is an accessory used on a woodworking workbench to allow clamping of wooden items while being worked or planed. Dog in general is something which holds. At its most basic a bench dog is simply a peg which is installed in a corresponding dog hole in the top of a bench. Wikipedia****
I skip to the end so to make sure its worth my time.
Some people are born gifted, the rest of us mere mortals just copy!
Well done mate. I'm not going to make it he same one as you made but I have several of those cheap jacks in a box and I need a jack for my drill press so that's my next project. Cheers from Perth Australia.
That is very resourceful and practical for a shop tool that is otherwise expensive.
Nicely done.
I love your video tutorials, getting to the point and not lengthy ,especially when you fast forward so viewers can get the idea and no voice over.
Great job.
Absolutely, outstanding repurposing of a discarded item. Incredible imagination. Kudos to you. Really enjoyed the video.
Nh
This is good if you have the tools to make the project. We had benches that had all this in Jr high shop. High school shop also had benches with the holes and metal inserts. I like the wooden inserts but you must have rock Maple or other hardwood.
Conscientious enough to mute the angle grinding ....superb.
Good fabrication too ...like this video lots...cheers....
safety and prep.,good sharp tools, clean worksite, No music, (only that of a tool ), efficient use of damaged article and most of all, Creativity. good workmanship. Thank you. subscribed. Peace and Truth will prevail. :)
Thankyou vm , reciclyn with your magic hands and creativity !.
Health for you andyours best Regards from SouthAmerica !
I’m all for the faithful replication of someone else’s idea but he needs to be referenced. Neil Pask made this (almost exactly) a while back on his channel Pask Makes. He’s a really great guy and I’m sure he’d be happy to know someone else tried his idea.
I'm not sure he would be too pleased not to get the recognition for it though. Cheers.
@@11111972cjb what if this guy (Handcraft) never saw the other video? can a similar idea strike two people ? just saying!
Could be the same person with multiple channels....$ 🤔
Классная идея! Возьму на заметку, спасибо.
Руки у тебя золотые, приятно было смотреть! Лайк и подпись!
Very ingenious way of turning old stuff into good use, good thing i click on this! reminded me of earlier works of Paskmakes, thanks for sharing it.
Creative imaginations and skills are fostered through the trades and doing things with your hands. This is why you don't give up Manufacturing.
This mans skills could be used in any manufacturing, machine, or wood shop..
Thanks for sharing.
My friend, your ingenuity and resourcefulness always make me smile. Well done. I love repurposing stuff.
Ước gì hồi nhỏ mình được xem những Clip này, có lẽ mình sẽ chọn làm thợ cơ khí, thợ mộc dân dụng, hay cao hơn là học giỏi để trở thành kỹ sư cơ khí, chế tạo máy, điện, thì có lẽ hợp với mùnh hơn!? Vì mình vốn thích kỹ thuật và có khiếu sáng tạo từ nhỏ mà!
Brilliant! Then I said to myself, those vises used to make this, to demonstrate it's use, could have used the vise there already. No?
An additional vise never hurts. Also this could hold wide pieces on the flat side instead of the edge.
No! Not the same kind of vice setup. You can't use the vices he had for large pieces of wood. His new design can accommodate for much larger pieces. Extremely useful for sanding the surface of a small table top as an example, but imagination is the only limit. Totally valid question though. 😃
How interesting it was that you produced such a product from Jack Machine. We saw a very interesting idea in this video. We are waiting for your next educational videos.
Sometimes i'think, where This guy get the ideas from to make always This kind of materials. Just fantastic. Thumbs up.
A B&D workmate maybe?
@@BigKelvPark c0n7
m0⁷üì
great idea, but a bit complicated!good job, sir
Pask makes made a awesome table workbench and included this particular idea. I’d check out pask makes if I was any of you woodworkers.
Very good ideea. Thank you 👍😊
Loved the video, it seems the dog holes should be all the way thru to keep from catching trash. Very clever thank you for sharing.
An ad 1:16 into the video, then 4:47, then 8:54......nice touch for a 10 minute video! Added to my block list
Why don't you show the end result right at the start so people can see what the end result is? Then they can decide if it's worth watching, to see how to make one. Good work though!
Usually people like to watch the process of work itself and a little intrigue adds interest! For those who care about the end result you can use the rewind function )
I'm with you Paul. It's "click-bait" to make you watch the whole video. I just jump to the end to see what the hell it is, then decide whether I'm going to go back and watch the build. Too often I've watched someone's build, only to find that their build doesn't even relate to the tile of the video and what they are building has no interest to me, or what they built is just crap.
@@chrisgraham2904 I tried jumping to the end to see and I still have no clue other than it's a "unique idea"
I was just going to say the same exact thing! Very annoying to watch
Start your own DIY TH-cam channel and make the videos the way you want them. So far, Vanya has not let us down.
I wish I had just 1,000,000th of your ideas, and talent to make stuff. You rock
Awesome, I have a broken jack I need to do something with thanks! I’m going to use a piece of scrap uni-strut instead of the square tubing.
At the beginning, I thought it was unistrut.
This is one of those, "Let me show you all my tools, how cool they are & what I can do with them," shows,
GREAT IDEA,. GREAT USE OF RECYCLING MATERIALS, THANK YOU GOD'S BLESSINGS ✝️⚾🙃
You sir are brilliant.
Love this project
Love to see all these creations being used, mostly to make more. Fascinating to watch and see how long it takes me to guess the end product. 🤣🇷🇴🇬🇧
Снизу, под фанеру сделай из тонкой фанеры или кусочка пластика, или тонкой металлической пластины нащельник, чтобы в пустоту профиля, где резьба не попадали стружка и опилки. Можно даже не крепить, просто сделать так, чтобы эта полоска всегда перекрывала получившуюся дыру в столе.
Unbelievable, excellent real clever. Total respect. Fantastic!
Regards Gareth Wiltshire.
Thank you very much Gareth !
The two dislikes are from people that are just salty they couldn't do something like this. Great idea , great execution, and it certainly looks like it serves the intended purpose.
Great idea. And nicely executed for an early concept. I imagine it will evolve even further as you use it. Thanks for sharing.
Great video. I understand why some give bad comments because they can't do it and envy you. Please keep on and give us more ideas!
I've done my share of fabricating so on that note my hats off to you. The part I laughed about was the level of skill it takes to perform some of the fabrications. (Things done by hand) not everyone's going to be able to do it.
Absolutely. It looks easy but if it were me, I would have ruined it couple of times over.
Anyone can learn these skills. All it takes is a DESIRE to learn. No one is born knowing how to use a welder or other machine equipment. It's all learned.
For the people out there that can't do this, I feel that they just haven't TRIED. Haven't given it an honest attempt. Yeah, you're gonna ruin a few pieces on your way, but that's ok, that's how you learn.
There was a time in our country that ALL men were handy. You had to be in order to survive. Now, less than half the population can change a flat tire on their car. Is this a societal problem, or a skill problem?
👌Thanks for sharing your knowledge 👍I like this idea👍👍
Ur so talented good job!
8:16 есть тиски они то же самое могут делать!!! Еделал то что у тебя уже есть??? зачем??? просто приделай к подвижной губке упор который будет выше стола
That was a really COOL idea.
I really like that you repurposed something that was trash by most people. 👍👍
Creative and ingenious reuse of used or broken stuff👌👍
Don’t listen to the haters, great video, love the intrigue, keep up the good work. When the thumbs down critics make their own video, then they comment! Easy to criticize, harder to come up with your own ideas.
You received a standing ovation in our home! BRAVO!
👏👏👏👏👏👏👏
Brilliant idea implemented by you ..!
TVRepnoseque... *¡¡¡ CALLATE !!!*
Fantastic idea.... now I know what to do with scrap unistrutt laying around.thank you for sharing.
Really nice video. No crappy music, no endless nagging to subscribe. Great idea, I wish I would not have thrown my old ones out. I enjoyed the video, great job!
Brilliant idea. That's definitely in my hacks list. Thank You.
Kipp
881"""no
Автор молодец. Отличная идея и отличная реализация. Многие могу сказать, что можно купить специальный стол, и тд. Да, можно. Но это дорого, и не всегда есть возможность сразу понять, что нужно. А автор по сути, сделал именно то, что надо ему. Молодец.
I real liked the idea! Enjoyed the suspense too as to what it was going to be. Going to make one myself!
Thanks for the idea!
Excellent video. Very creative use of something that would otherwise end up in a dump. Also, thank you for being kind to the late night watchers by muting your power tools. It makes viewing your content much more pleasant.
What a great idea! Thanks
impressive, he built a carpentry bench in the style we used in carpentry class circa 1950. and hand wood planner which I have used and know how to use. his work is so well video as well. love them thanks
An ingenious idea. Certain things surprised me though : your use of apparently low quality wood - it looked like ordinary 2X4 lumber stock ; your use of Forstner bits in a hand held drill and drilling from both ends rather than a straight through bore.
Harold L POTTS the Wood can crack if you drill straight through
@@abdulkek4821 Yes of course. My point was the use of Forstner bits in a hand held drill which can give your hand/wrist a nasty jolt. Secondly the purpose behind Forstner bits, intended for use in a drill press, allows precision of depth of penetration, allowing the point only to pierce the bottom of the hole. The piece is then reversed and the bit inserted in the hole, allowing a fresh cut from the other side and avoiding the splitting you mention.
Wow you work both metal and wood
It's great, In india we have to see to ppl carpenter n blacksmith
nice video, but EXTREMELY DANGEROUS to rip cut wood on a miter saw!!!
At least we can look back at this video and remember when he had all his fingers....
While wearing gloves, no less!! So much stuff here where he's not being too safe.. I can't watch anymore.. cant support the viewer numbers with his unsafe practices. Someone will follow his ideas and cut off fingers..
Did you stay up all night dreaming this? Its so cleaver. I am amazed, I wish I was this good.
fantastic idea! I enjoyed it a lot! I think myself : Wouldn't there be a possibility to fit a plastic lid inside of the mechanism so that the wood chip/wood dust to get in ? I wonder it is a bit difficult to keep its compartment clean. What do you think about ? Anyway, your job is perfect! Congrats!
ممتاز جدا عقليه جميله الى المزيد من الابداعVery excellent, a beautiful mindset, to more creativity and suspense, waiting for more amazing videos والتشويق منتظرين فديوهات اكثر روعه من ذالك
You... i like you!!
I enjoy your creativity as much as watching you actually implementing it! Keep going, you've earned a subscriber!
Thanks!
@@hand_craft o
Si señor ,una idea genial y muy practica ....que resuelve el tema de SUJETAR FUERTE LA PIEZA AL BANCO DE TRABAJO .
ESPECTÁCULAR.
ENHORABUENA
Great video as always, love how there's no bgm. I
Von dem Wagenheber ist ja nicht viel übrig geblieben 😁 Aber an sich eine echt schöne und wirklich gute Idee. Gefällt mir sehr gut 👍
How to angle grind my fingers off in one easy lesson.
Rule one keep hands away from wheel. I have seen just how fast a man lost his fingers. Not nice.
Why do you say that? When he uses the mitre saw?
Those gloves used to have fingers!
@@hughjarrse And the mitre saw eate them! ;-D :-D :-D
I'm carpenter - joiner - cabinet maker & it's really difficult to correctly clamp a piece so close to the blade.
If you are concentrated at your job & if nobody comes to disturb you, there's no problem.
@@cornelius131 agreed ..... a lot of people watching this are not
εχεις φτιαξει εναν απιθανο παγκο εργασιας, μπραβο!
People that disliked thought angle grinders, dremels, and routers were quiet tools before starting the project... 😂
Lol ... my angle grinder, router and dremel are all louder than any of my saws.
Hola.
Gracias por compartir esta genial idea...
Y Felicidades por un trabajo excelentemente desarrollado y una terminación brillante...
Saludos.
I’m surprised you didn’t start with unistrut. Did you have square stock on hand, or is unistrut unavailable in your area
I'm pretty sure that was unistrut....
you are pretty sure it was strut? . Then we watched a different video. I saw him cut a tab out of a a piece of tube steel .
Was lighting trucking not unistrut
@@NPC-157-e7r It was a solid piece of unistrut ...not all unistrut has cut outs in it some are solid and then you flip it over and the edges are curled in... like unistrut...👀
Outstanding job Vanya. You have inspired thousands people with your excellent creativity
The Idea, presentation & video, all very well done !!
A lot of wasted time on a simple light duty hold down. Not worth the effort.
Really ingenious. I'll try to make one myself. Thanks for sharing.
Muito util amigo
Dantes... *¡¡¡ CALLATE !!!*
You ingeniously clever man 😉👍🏼😊
Up next:
aGood use for a Pigs Foot.🤣
Good Job mate!
Thank you for sharing your creative idea, Great job Bro.
Go to "pask makes" here on TH-cam to watch the guy who did it first
indeed at least give the credit
Friend, thank you for sharing
Why the hell blow it off with air if you're just going to cut it to pieces. What was the point really?
That's what you got out of this video ? Weird. I can tell you why I would, because I don't want dirt all over my bench. Metal I can pick up with a magnet scoop, dirt not so much.
You're special buddy.. Keep your talent up.
Great idea a good resort at the bench thanks Alfred
That's one heck of a nice table wood clamp. Genius
Buen Trabajo desde las Palmas de Gran Canarias
I am always super impressed by this guy.
He's a first class Fabricator.
One of the best pair of hands I've ever seen.
Really? This showed a horrifying abuse of tools. Never trust anyone who uses a precision measuring instrument to score a line or has no clue about how to use a round file or how to use a grinder or bench saw safely.
Brother lovely idea lovely I have this idea but I don't ha machine tools but I love to do wooden workshop you have done a awesome job
Well that's pretty gosh darn slick! Very creative.
The explanation and context at the beginning really helped to visualize what the project is about.
👍👍 - sehr gut‼
Ausgezeichnet!!
Sehr gut dokumentiert 👍
One time out of fifty I am glad I sat all the way through one of these videos. This was that one. Incredibly well thought out and remarkably accomplished. Thanks for expanding my mind.
Прекрасно... Но для этого столько времени потратить необходимо. Я бы не стал заморачиваться) А так очень качественно. Мастер!!!
Excellent job Buddy 👍👏👏🤜 Congrats
Зачем так заморачиваться, для изготовления такого приспособления, если у человека такой арсенал инструментов и оборудований
Ecvellent idea and Craftsmansip OMO you can never have too many clamping or Vises in a Workshop 16 years ago I suffered a Traumatic Brain Injury that paralyzed one of my hands and part of that arm so these days as a retired Woodworker i am always loooking for creative and inexpensive ways to clamp my projects around the workshop to be able to work on t with my good hand it was hard to tell in the video did you make your Dogs out of Maple ? That happens to be one of my favorite Species to work with and use because of its overall Strenghth and next to Cedar I find Maples smell to be quite pleasing to my nose
Excellent job , and really good idea 👏👏👏👍