Ways to use broken tools you never knew existed(Don't forget to like)

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 พ.ย. 2022
  • In this video, you will see some methods of optimal use of broken tools, after which you will no longer throw away broken tools.
    How to make a handmade drill bit: • How to make a handmade...
    complex surfaces in lathe: • complex surfaces in lathe

ความคิดเห็น • 290

  • @zahraasadollahpour7082
    @zahraasadollahpour7082 ปีที่แล้ว +37

    It was great and I enjoyed all your techniques my friend👏
    Thanks for sharing it

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว +3

      Glad you enjoyed it!👍

    • @mansourninhouche1474
      @mansourninhouche1474 ปีที่แล้ว +1

      سلام هل تعملين في هدا المجال ظ؟

    • @kalakhan1854
      @kalakhan1854 8 หลายเดือนก่อน

      @@Mastermind- oo

  • @KW-ei3pi
    @KW-ei3pi ปีที่แล้ว +62

    Great work and some great ideas. Thank you!
    PS: Please get rid of the annoying music. Shop people would rather just hear the machines.

    • @R.W.89
      @R.W.89 ปีที่แล้ว

      Not necessarily. Both the video and music was great^^

  • @Diebog
    @Diebog ปีที่แล้ว +66

    Good content but please leave the music out. I’d much rather just listen to the machines.

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว +7

      Sure my friend🙏

    • @k-bear7707
      @k-bear7707 ปีที่แล้ว +15

      This comment needs to be pinned to every machining video on TH-cam. The music is so distracting.

    • @Diebog
      @Diebog ปีที่แล้ว +3

      I totally agree! I do not understand what so many machine related videos have this distracting unneeded music. If you look at the comments on every singe machining video with music every one is saying the same thing. Turn off the music! Guys/gals that watch these videos are watching for the content, there is no need to “spice” up the video with lame music. Let the machine sing instead

    • @neilw2O
      @neilw2O ปีที่แล้ว +1

      Respectfully, please kill the crappp 16 bars of sound. Is this a machine fault?😅

    • @jeffwatkins9797
      @jeffwatkins9797 ปีที่แล้ว +2

      Then turn your volume Down , he made the video. . .

  • @SolidRockMachineShopInc
    @SolidRockMachineShopInc 6 หลายเดือนก่อน +5

    Nice job! I always keep my broken carbide to make cutting tools out of. You have some very cleaver homemade tools here.

    • @Mastermind-
      @Mastermind-  6 หลายเดือนก่อน

      Cool, thanks for watching my dear friend🙏🙏👍

  • @kentuckytrapper780
    @kentuckytrapper780 ปีที่แล้ว +11

    I built the fly cutter, it works great, great video, keep'um coming.

  • @CreativeIdeasMaker
    @CreativeIdeasMaker ปีที่แล้ว +5

    *It's great that you repair things yourself with high skill or turn them into useful tools. We enjoyed watching you.*

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thank you very much my friend🙏

  • @Mrkemalkut
    @Mrkemalkut ปีที่แล้ว +3

    I was having some soup while watching this, now I gotta heat my soup up again. Frigging loved it👏👍

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thank you very much my friend🙏

  • @836dmar
    @836dmar ปีที่แล้ว +2

    Lots of great techniques shown. Great work!

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thanks a lot my friend

  • @markwatters6875
    @markwatters6875 ปีที่แล้ว +3

    Excellent tool making. Thank you 👍🇦🇺

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว +1

      Thanks a lot my friend👍

  • @AlbiesProductsOnline
    @AlbiesProductsOnline ปีที่แล้ว +12

    With the second build of the fly cutter if you mounted to to your cross slide of your lathe and kept it able to pivot you could use it as a spherical cutter

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว +5

      Exactly right
      Thanks, my friend👍

  • @pradeepramuk
    @pradeepramuk ปีที่แล้ว +2

    Excellent, Great work, and ideas to zero wastes of precious tools. ❤️❤️❤️❤️🌹🌹🌹🌹🌹🌹🌹🌹🌹, Thankyou for sharing.

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thank you so much 😀👍👍🙏

  • @snake9100
    @snake9100 ปีที่แล้ว +4

    bro your tool grinding skills are insane

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Appreciate that🙏👍

  • @Diy_Cnc84
    @Diy_Cnc84 22 วันที่ผ่านมา

    This video is helpful. Thanks 😍

  • @user-zl4lc7cf7b
    @user-zl4lc7cf7b 6 หลายเดือนก่อน +2

    You are the best teacher i hav seen

    • @Mastermind-
      @Mastermind-  6 หลายเดือนก่อน

      🙏🙏🙏💐

  • @joels7605
    @joels7605 ปีที่แล้ว +2

    I just found your channel. This is some good work. I'll probably try to reproduce a couple of these tools. Thanks!

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      I am very happy my friend👍🙏

  • @lusoneldormeus9770
    @lusoneldormeus9770 ปีที่แล้ว +1

    Thank you so much for this video. It's very helpful.

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Glad it was helpful!🙏👍💐

  • @delricoeppes
    @delricoeppes ปีที่แล้ว +3

    video was super good you are a master mind . Thank you so much for sharing !!!!!!!

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thank you very much my friend🙏

  • @mfmrss
    @mfmrss ปีที่แล้ว +3

    Very cool ideas, thank you👍

  • @threegreencharms
    @threegreencharms ปีที่แล้ว +3

    Wow! Excellent.

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Glad you like it!🙏👍

    • @threegreencharms
      @threegreencharms ปีที่แล้ว +1

      @@Mastermind- the adjustable boring bar, and the L-shaped multi-miller---I am definitely going to make my own versions of these. Such simple design, why even buy a boring head? These are genius ideas, and if they are indeed your ideas, I suggest selling the plan drawings---I would buy these blueprints!

  • @bulletproofpepper2
    @bulletproofpepper2 7 หลายเดือนก่อน +1

    Great ideas, thanks for sharing.

    • @Mastermind-
      @Mastermind-  7 หลายเดือนก่อน

      You are so welcome!🙏🙏💐

  • @malinoisattack
    @malinoisattack 5 หลายเดือนก่อน +2

    Tolle Arbeit meinen Respekt!!!
    Weiter so 👍 💪 🇩🇪.

    • @Mastermind-
      @Mastermind-  5 หลายเดือนก่อน +1

      Vielen Dank, mein guter Freund🙏👍👍👍

  • @paul5683
    @paul5683 ปีที่แล้ว +4

    With a dial caliper and a dial indicator, you could have actually bored a hole to an accurate size.
    Make yourself a little micro boring bar with one of those end mill shanks.

  • @martinkscott
    @martinkscott ปีที่แล้ว +1

    Brilliant mate I’ll try some of them tips 👍🏻👍🏻

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Glad you like them!👍

  • @crabelo1000
    @crabelo1000 3 หลายเดือนก่อน

    Perfect job. Thanks!

    • @Mastermind-
      @Mastermind-  หลายเดือนก่อน

      Glad you like it🙏🙏🙏👍❤️

  • @hosseinjahangard336
    @hosseinjahangard336 13 วันที่ผ่านมา

    That was fantastic and best video i have seen in this regards , many thanks
    Also would you pls tell me the broken tools are HSS tools or something else? 🙏🏼👌👏

  • @OmeMachining
    @OmeMachining ปีที่แล้ว +4

    Great and informative video 😁👍

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thank you so much my friend🙏

  • @petriranki2662
    @petriranki2662 ปีที่แล้ว +2

    10/10 =10 PLUS

  • @harrymulder8534
    @harrymulder8534 3 หลายเดือนก่อน

    Awesome, you are the best.

    • @Mastermind-
      @Mastermind-  หลายเดือนก่อน

      Wow, thanks!🙏🙏👍

  • @josefranciscodesousafranci8128
    @josefranciscodesousafranci8128 ปีที่แล้ว +2

    Peça sensacional

  • @brahlah233
    @brahlah233 ปีที่แล้ว +1

    Creative. Thanks.

  • @boshabosho1505
    @boshabosho1505 11 หลายเดือนก่อน

    You are a true artist. Good luck always, God willing

    • @Mastermind-
      @Mastermind-  11 หลายเดือนก่อน

      thank you my good friend🙏

  • @ChicagoRacerJoe
    @ChicagoRacerJoe ปีที่แล้ว +1

    You are quite the expert grinder!

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thanks a lot my friend

  • @andreacasali7708
    @andreacasali7708 ปีที่แล้ว +2

    I alwais reuse finish carbide drill to make micro boring bar or other small tool , for make small lots of pieces

  • @RRINTHESHOP
    @RRINTHESHOP ปีที่แล้ว +1

    Nice set of tools.😊😊😊😊😊😊

  • @adriankohli4870
    @adriankohli4870 ปีที่แล้ว +3

    Top-Job, Sir👌

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thanks a lot my friend🙏

  • @UglukGPZ900
    @UglukGPZ900 ปีที่แล้ว +4

    So, grind it and use it as a cutting tip, grind it and use it as a cutting tip or grind it and use it as a cutting tip? I actually knew of that trick. How about grinding them to use as fixed centers, clean up the ends and use them as dowel pins, measuring pins, really tough axles or center punches for hole transfers.
    Oh, and get yourself a protective cap for your horizontal spindle taper when your spraying chips everywhere.
    Cheers

  • @MeddeDesign
    @MeddeDesign 9 หลายเดือนก่อน +1

    Thank you!

    • @Mastermind-
      @Mastermind-  9 หลายเดือนก่อน

      You're welcome!🙏💐

  • @JulioCesarA
    @JulioCesarA ปีที่แล้ว

    Excelente trabajo muy util

    • @Mastermind-
      @Mastermind-  11 หลายเดือนก่อน

      gracias mi buen amigo

  • @Bianchi77
    @Bianchi77 ปีที่แล้ว +1

    Creative video, thanks :)

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thanks a lot my friend

  • @machineshop4816
    @machineshop4816 ปีที่แล้ว +2

    Very good sir.👍👍👍

  • @ToreDL87
    @ToreDL87 5 หลายเดือนก่อน +1

    Dead on!
    I love broken machining tools, that hardened steel can be re-purposed into other machining tools, center punches, parts, etc.

    • @Mastermind-
      @Mastermind-  5 หลายเดือนก่อน

      🙏🙏🙏💐

  • @MechanicalGurus
    @MechanicalGurus 8 หลายเดือนก่อน +1

    Good work my friend!

    • @Mastermind-
      @Mastermind-  7 หลายเดือนก่อน

      Thanks a lot my dear friend

  • @rubinelemoura593
    @rubinelemoura593 ปีที่แล้ว +4

    Ferramenta muito boa hein amigo hein parabéns grande abraço fique com Deus sucesso👊👍👌🥰💯

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Muito obrigado meu amigo e fico muito feliz que tenha gostado🙏🙏💐👍

    • @user-xv6jh3hj7l
      @user-xv6jh3hj7l ปีที่แล้ว

      Высший класс!!! Особенно мне понравился последний вариант державки для резца, по возможности сделаю и себе такой.

  • @venkatesans1256
    @venkatesans1256 ปีที่แล้ว +1

    Great idea bro thanks bro

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thank you so much my friend🙏

  • @EMANWeldingVlogs
    @EMANWeldingVlogs 9 หลายเดือนก่อน

    Great ideas all technique are useful, thanks for sharing this video, it is mind blowing, ❤

    • @Mastermind-
      @Mastermind-  9 หลายเดือนก่อน

      Thanks a lot my friend🙏🙏💐

  • @hunteradventuresniper9914
    @hunteradventuresniper9914 ปีที่แล้ว +1

    I really like this kind of work, greetings from indonesia

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thank you very much my friend🙏

  • @Tome4kkkk
    @Tome4kkkk หลายเดือนก่อน

    Any ideas on modifying a cheap chinese drill press to have the spindle move in added tight tolerance bushings?

  • @Stefan_Boerjesson
    @Stefan_Boerjesson ปีที่แล้ว +3

    Great idea and great work.
    The last sharp tooth of the hobby bandsaw got dull so the blade was exchanged. Do You have any project for the dismissed blade? Some kind of springs ought to be possible.

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      I don't understand what you mean, my friend

    • @billdavies6463
      @billdavies6463 ปีที่แล้ว

      @@Mastermind- Stefan is asking whether you have a use for a worn out bandsaw blade.

  • @daxmakes
    @daxmakes ปีที่แล้ว +1

    Nice grind. 👌

  • @TheStuartstardust
    @TheStuartstardust ปีที่แล้ว +5

    22:58 - What air pressure do you use? Pretty agressive when I can blow the tip of the hss bit! 😜🤭
    But on a serious note, perhaps the release rake underneath was too much since it broke. 🤔🤓
    Nice video 💪

  • @hosseinjahangard336
    @hosseinjahangard336 13 วันที่ผ่านมา

    Also sir in nest videos could you pls show us how you grind these broken tools to use for different uses ?
    Thanks a world for sharing your experience 🙏🏼🙏🏼🙏🏼

  • @Timmays
    @Timmays ปีที่แล้ว +2

    Fantastic job.

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thank you so much my friend🙏

  • @tomk3732
    @tomk3732 ปีที่แล้ว +1

    Standard stuff - people have been re-using HSS and before high carbon steel for over 100 years. Adding carbide to the mix like 60+ years ago.
    This is what cutter and grinder is for (part of the use).

  • @user-om7bd8jr3p
    @user-om7bd8jr3p 9 หลายเดือนก่อน +1

    always keep boken drill bits to make center points that fits different hole sizes

  • @paultrainer4560
    @paultrainer4560 ปีที่แล้ว +2

    Awesome!

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thank you so much my friend🙏

  • @CarapaxSPb
    @CarapaxSPb 7 หลายเดือนก่อน +2

    Хотел бы я жить по соседству... божечки, сколько бы мы сэкономили друг другу....

  • @paoloboaro-iv6lz
    @paoloboaro-iv6lz 9 หลายเดือนก่อน +1

    ottimo lavoro, hai il talento di un attrezzista di vecchio stampo

    • @Mastermind-
      @Mastermind-  9 หลายเดือนก่อน

      🙏🙏💐

  • @shapoorirani6982
    @shapoorirani6982 ปีที่แล้ว +3

    Superb 🙏🙏🙏

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      سپاسگزارم دوست عزیز🙏

  • @farhadfadayi7389
    @farhadfadayi7389 10 หลายเดือนก่อน +1

    woooow. I love that. great idea.

    • @Mastermind-
      @Mastermind-  9 หลายเดือนก่อน

      Glad you like it!🙏👍

  • @sundarAKintelart
    @sundarAKintelart ปีที่แล้ว +1

    Excellent

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thank you so much 😀

  • @user-it9th8jb1u
    @user-it9th8jb1u 5 หลายเดือนก่อน +1

    Чисто, аккуратно, всё по делу. Мастер.

  • @javiercalvo8031
    @javiercalvo8031 ปีที่แล้ว +1

    Exelente super herramienta

  • @matiasbarraza9256
    @matiasbarraza9256 ปีที่แล้ว +1

    great job!!! I suscribe!

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว +1

      Awesome! Thank you!🙏👍💐

  • @wawansetiawan4042
    @wawansetiawan4042 ปีที่แล้ว

    Very nice.👍👍

    • @Mastermind-
      @Mastermind-  11 หลายเดือนก่อน

      Thank you 👍

  • @Sh-uk8en
    @Sh-uk8en 9 หลายเดือนก่อน +1

    Very nice good.

    • @Mastermind-
      @Mastermind-  9 หลายเดือนก่อน

      Many many thanks🙏🙏🙏💐

  • @nikolaoskampitsis7030
    @nikolaoskampitsis7030 9 หลายเดือนก่อน +1

    REALY YOU ARE TECHNICIAN

    • @Mastermind-
      @Mastermind-  9 หลายเดือนก่อน

      🙏🙏🙏🙏👍

  • @paulchou8442
    @paulchou8442 9 หลายเดือนก่อน +1

    Amazing

    • @Mastermind-
      @Mastermind-  9 หลายเดือนก่อน

      Thank you! Cheers!

  • @angelgarciamunoz9224
    @angelgarciamunoz9224 ปีที่แล้ว

    Suuuupersss👍👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼un saludo desde BCN. España

    • @Mastermind-
      @Mastermind-  11 หลายเดือนก่อน

      gracias mi amigo

  • @trgtech9269
    @trgtech9269 ปีที่แล้ว +2

    Very good sir.
    Low cost make in tool and more products machining.
    It's profit for mid class industry.
    I like this.
    Please share more 💡ideas. Make grow india.

  • @puntoyfinal2553
    @puntoyfinal2553 7 หลายเดือนก่อน

    Gracias por hacernos ver tan facil

    • @Mastermind-
      @Mastermind-  7 หลายเดือนก่อน

      Me alegro mucho que hayas disfrutado y gracias mi buen amigo.🙏💐

  • @mansourninhouche1474
    @mansourninhouche1474 ปีที่แล้ว +1

    it's a very good job

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thank you so much my friend🙏

  • @farouksaidsaid5684
    @farouksaidsaid5684 ปีที่แล้ว +2

    عمل جيد جميل وفعال شكرا

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว +1

      أنا سعيد جدًا لأنك استمتعت بها ووجدتها مفيدة

    • @farouksaidsaid5684
      @farouksaidsaid5684 ปีที่แล้ว

      @@Mastermind- شكرا اريد ان ارى كيفية تصنع المسننات الترويس

  • @mirosawkrzysztofczyk4788
    @mirosawkrzysztofczyk4788 5 หลายเดือนก่อน +1

    Super!.

    • @Mastermind-
      @Mastermind-  5 หลายเดือนก่อน

      Thank you! Cheers!👍🙏

  • @christianheidt5733
    @christianheidt5733 4 หลายเดือนก่อน

    I know all these tricks, 36yrs machinist, very cool!
    Makes me appreciate my cnc mill 😂😂😂.

  • @user-ale7723
    @user-ale7723 2 หลายเดือนก่อน

    بلفعل الآت مناسبة وشخص عبقري لن تشاهد بعد ذالك فواتير مزعجة 😁😁😁😁
    اهنيك على هذه العبقرية الأكثر من رائعة👍👍👍

    • @Mastermind-
      @Mastermind-  หลายเดือนก่อน

      🙏🙏🙏🙏👍❤️

  • @rogerioluis8522
    @rogerioluis8522 ปีที่แล้ว +2

    that's common where don't have money, like in brasil

  • @DIAMOVEVO
    @DIAMOVEVO ปีที่แล้ว +1

    Good ♥️

  • @appalachianbushcraft3959
    @appalachianbushcraft3959 ปีที่แล้ว +2

    Do you have a drawing for the fly cutter? That thing is awesome…

  • @stanisawmuszynski8978
    @stanisawmuszynski8978 ปีที่แล้ว +2

    Super robota ,panie,

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Dzięki, przyjacielu🙏🙏👍

  • @samuelmullins271
    @samuelmullins271 ปีที่แล้ว +3

    Hope this helps a newbie: Halfway video play I remembered my first day's absence to machine-shop class orientation. It was worthwhile my observations to understand these are broken "drills" and not drill-bits being salvaged into "cutting-tools", which these are repurposed into "tool-bits", and others so labeled according to machine equipment it is specifically bench grinded for:
    Explanation is a lathe's tool-bit is reformed into different angle/shape for a differently designed holder than milling machine. Cutting tools are distinguished from mechanics' or etc non-machine shop tools. Even their alloys are hardened/tensile strenghthened by tempering processes, and even slightly different betwixt some machine applications. Thus especially different are metal categories unlike other tools outside a machine shop. Another difference is a mechanic's tools refer to power-equipments, but these are machines like a drill-press for one used among those displayed in this video. This video is a worthwhile contribution for DIYs economizing.
    I liked that tech-school class in my younger days. If only possible for me to overcome personal issues of attendance and punctuality, I could have broadened my manufacturing independance desires into any materials for fabrication, except for specialty parts like electronics.
    Probably I could not have progressed up to their programmable multi-operation machine. And tech magazines debuted programmable solution-bath equipments having electric-arc cutters! But isn't learning what you can and when you can such great fun?

    • @baremetaltechtv
      @baremetaltechtv ปีที่แล้ว +3

      Tf you talking bout? 🤔 ❓❔❓‼️⁉️

    • @andybilakshow260
      @andybilakshow260 ปีที่แล้ว

      Yep, dont give up there's still hope for manufacturing anything your little heart desires.

    • @odi_de_podi
      @odi_de_podi ปีที่แล้ว

      Great take from it! I had similar experiences but now I'm looking into how to build a wire EDM machine at home, I mean, the learning never really stops

    • @ScuffedEngineer
      @ScuffedEngineer ปีที่แล้ว +1

      @@droopy_eyes If that is true, it's pretty ironic and he should've went to class more often. The guy is using broken carbide endmills, which can be ground into any serviceable tool in the machine shop. He'd also know the shank of a HSS drill is still serviceable if you apply the effort as shown, but they're so cheap it's not worth it to most these days. The biggest thing lost in all of the repurposing is the benefit of the coatings.

  • @himansubag3729
    @himansubag3729 7 หลายเดือนก่อน

    Awesome

    • @Mastermind-
      @Mastermind-  7 หลายเดือนก่อน

      🙏🙏💐

  • @deche4910
    @deche4910 9 หลายเดือนก่อน +1

    Grande 😮

  • @prasartt3844
    @prasartt3844 4 หลายเดือนก่อน

    How can he grind the broken pc.of tool to be the acurate angle at the tip used for threading the metal rod?

  • @akolkar2530
    @akolkar2530 11 หลายเดือนก่อน

    Can we use carbide drill as boring tool us ing drill machine if you have tried pl share video.Thanks for video innovative 👌👌👌👌👌

    • @Mastermind-
      @Mastermind-  11 หลายเดือนก่อน

      thank you my good friend🙏

    • @akolkar2530
      @akolkar2530 11 หลายเดือนก่อน

      @@Mastermind- your answer yes or no , difficult to answer.

  • @antoniomontana2232
    @antoniomontana2232 ปีที่แล้ว

    Классный самокальный резец ! И красивый!

  • @andybilakshow260
    @andybilakshow260 ปีที่แล้ว +1

    I save a lot of broken cutters. Now all I need is a mill & lathe🤔

  • @ma-lakshmifabricator7549
    @ma-lakshmifabricator7549 7 หลายเดือนก่อน +1

    Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍

    • @Mastermind-
      @Mastermind-  7 หลายเดือนก่อน

      Wow, thank you my dear friend and thanks for watching🙏💐

  • @AndrewSpencer2
    @AndrewSpencer2 10 หลายเดือนก่อน

    Nice work! What kind of milling machine is that? It looks like a shizuoka

    • @Mastermind-
      @Mastermind-  10 หลายเดือนก่อน +1

      Lunan

  • @jimsvideos7201
    @jimsvideos7201 ปีที่แล้ว +1

    Nice.

  • @JoseGomes-zc8sp
    @JoseGomes-zc8sp 2 หลายเดือนก่อน

    se nota que se le gasto en la ultima pasada, o sea que sirve solo para hacer un pedacito de rosca?

  • @wickedprotos1937
    @wickedprotos1937 ปีที่แล้ว +1

    Where did you get that green 'carbide' grinder wheel? thanks!!!

  • @jorgebonifacio7562
    @jorgebonifacio7562 4 หลายเดือนก่อน

    Muito criativo 😊

    • @Mastermind-
      @Mastermind-  4 หลายเดือนก่อน

      🙏🙏🙏👍🌹

  • @user-es5de3wr4r
    @user-es5de3wr4r 9 หลายเดือนก่อน

    Genius

    • @Mastermind-
      @Mastermind-  9 หลายเดือนก่อน

      Thanks for watching🙏💐

  • @cougar1861
    @cougar1861 ปีที่แล้ว

    First, I don't do this work but appreciate it immensely. So, at about 20:15 and following, why did you resort to the hand held disc cutter instead of using the more precise mill?

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Because it was done faster and easier and at this stage I trusted the accuracy of my work

    • @cougar1861
      @cougar1861 ปีที่แล้ว

      @@Mastermind- Thanks. What that hand held device a Dremel, or something more "exotic"?

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      th-cam.com/video/DCK3N_9NHRA/w-d-xo.html

    • @cougar1861
      @cougar1861 ปีที่แล้ว +1

      @@Mastermind- Thanks! Will be waiting for more videos.

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Thanks, my friend🙏
      I suggest you don't miss watching the next video because you will definitely be surprised

  • @JB_Onn
    @JB_Onn ปีที่แล้ว

    How much do you spend time and cost for this work? 😁 it’s better than to buy new one for best and convenient 🙏🇳🇵💕

  • @ZlodieIzZaholustia
    @ZlodieIzZaholustia ปีที่แล้ว

    Молодец! Что приятно, станину укрыл от наждачки и стружки! Мастер!

  • @missionimpossible1617
    @missionimpossible1617 ปีที่แล้ว

    hi use which type of steel for the tooling?

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      It depends on the type and application of the tool, but generally from 2312 and 2375

  • @sakthiganeshg261
    @sakthiganeshg261 ปีที่แล้ว +1

    News save tools video good 👍 👌 👏

  • @Flying0Dismount
    @Flying0Dismount ปีที่แล้ว

    Are you making up for something with that live centre?

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      I don't understand what you mean, my friend

  • @messenger8279
    @messenger8279 ปีที่แล้ว

    Some great ideas there. The tip of the thread cutter in the final segment is missing (23mins) Must have broken off.

    • @Mastermind-
      @Mastermind-  ปีที่แล้ว

      Yes my friend
      I think I put too much pressure on the tool