If you enjoy woodworking plans, you will love WoodPrix. Get inspired by all the endless possibilities of furniture plans and other wood projects to build, for both indoors and outdoors.
Thanks that's the easiest finger joint jig I have seen plus using double sided tape,, really helpful hack's, I will be copying a few of them, thanks for sharing
@MA-SH понимаю, я тоже два дня ветки перерабатывал, обрезал сад, я сделал себе дробилку, теперь дробью их и разбрасываю по огороду, к весне удобрение, как в лесу
I like the use of the countersunk screw for locking. That featherboard is excellent too. I have made many and they usually get discarded, but that’s a good solution. 👍🏻
Some of these would be super useful for work I'm doing now. Any chance you can add timestamps/chapters so we can jump to specific parts when we revisit the video when we're ready to make things?
@@MA-SH it's actually quite easy! You just go to your video and edit the description and do something like 00:00 - Intro 00:20 - Router box joint jig 1:44 - Router guide rail 2:57 - Router sled etc etc. Where 00:00 is minutes:seconds so 00:20 would mean 20 seconds into the video. You just have to make sure you start the list with the 00:00 - Intro (or whatever text you want) because it gives TH-cam a time reference of what all the other numbers are in reference to.
@@MA-SH Here's one for this video. Just copy and paste this list of timestamps/titles into your video description and edit the titles as you'd like them to be then save! Now your video will have chapters users can jump to! It's a little bit of effort to do it for every video but as someone that uses TH-cam more than TV I can personally say it makes the experience so much better. Just my little thanks for the cool tricks you shared! Can't wait to use that router spline and the box/finger joint. I'm getting ready to make a bunch of drawer boxes and that's going to save me so much time! 00:00 - Router spline Jig 2:12 - Drill lathe 3:25 - Flexible wood 4:31 - Bandsaw peg jig 5:43 - Router jib for square template 6:47 - Router box/finger joint jig 7:55 - Wood screw jig 8:30 - Dowel jig 9:55 - Marking gauge 11:38 - Corner drill guide 12:51 - Magnetic handsaw guide 14:25 - Table saw circle cutting sled 17:20 - Table saw lathe sled 21:01 - DIY Featherboard
You should have put the marked side down for the acrylic on the dowel jig. That way, you won't get alignment distortions from parallax through the acrylic.
The way you set up the comb was wrong, it did not apply any pressure on the piece being cut (which is its only purpose) but hopefully it did not, because it would have pinched the offcut onto the blade and made a hell of a projectile!!🤦♂️ should have been kept in front of the blade, letting the offcut free. You know the comb is doing its job when you see the teeth move slightly as you push the workpiece.
clicked off the video at 00:22, this should be flagged on youtube for extremely dangerous use of powertools. I don't care what you're wearing. Don't reach over a live blade.
Yeah, my eyes went really wide at that. I see this in other videos as well. People get far too casual with this sort of thing- even those who have been doing it a long time. Movement while tools are in action should be deliberate.
@@MA-SH Dude I've been watching your channel for a long time. In the beginning it was mostly cheesy click-bait stuff. But the last couple months? You're leveling up HARD. I actually bought a couple trim routers to try and build some of your jigs. You should definitely make at least a "MA-SH Handheld router jig" playlist. Hell, I'd through you some $ for formal plans if you did it.
動画では、SVO to doのパターンを第5文型（SVOC）として説明しているが、受験業界には、SVO to doは、第5文型ではなく、基本5文型のいづれにも当てはまらない、特殊な文型と考えている勢力が存在するらしい。SVO to doを第5文型（SVOC）として認めない理由としては、SVO to doのto doは、目的格補語の状態を表していないし、O = to doの関係も認められないからというものらしい。補語は、主語や目的語を説明するものであり、第2文型（SVC）では、S＝C、第5文型では、O＝Cの関係が認められるという伝統的な学校英文法の説明からすると、確かに、SVO to doでは、O = to doの関係は見られない。小生は、動画と同様、SVO to doのパターンを第5文型（SVOC）として位置付けるべきだと思う。そのため、補語についての定義的説明は、主語や目的語の内容を説明するものという従来の教え方ではなく、補語とは、動詞が必要とする追加的情報を提供するものであるという説明に変更した方がよいと思う。このように補語を定義すれば、SVO to doも、第5文型(SVOC)の一つとして説明することができる。
"Great video! These 14 woodworking hacks are super helpful and easy to miss. Thanks for sharing such practical tips to improve any project!"
Thank you buddy 🤝
If you enjoy woodworking plans, you will love WoodPrix. Get inspired by all the endless possibilities of furniture plans and other wood projects to build, for both indoors and outdoors.
Ich könnte Stunden zusehen, der Hammer, der Kollege, Super!!!
Danke für das Lob!😊
Отличный Тор! Все как всегда на высоте! ЖИРНЫЙ ЛАЙК!😊
Огромное спасибо Шеф🤝👍🫶
Je travaille le bois depuis peu et toutes les astuces sont les bienvenues 👍
Un grand merci 🙏
Je m'abonne 🤗
Merci et bienvenue🫶
Best video I’ve seen for ages, thank you! You make it look easy but clearly you are a very skilled carpenter. 👏
Wow, thanks!🫶😊
Amazing! You are a jig-making master 👍😲
Wow, thanks!🤝
Супер топ как всегда на высоте !!! Жирный лайк!!
Здравствуйте, благодарю 🤝
Buenisimos Cada uno de los trucos de carpinteria que Hiciste!! Muy bueno el video!!
Gracias por comentar🫶
Ya estas encaminado para ser un Carpintero!
@@rubenbarria1557 😇🤝
Really enjoyed these hacks, will be using a few. Thank you.👍
Glad you like them!🫶😊
Was für tolle Ideen! 😍
Danke fürs Zeigen! 😃
Hallo, danke 🫶
Very good tipps! Thank you 👍💪✌
Glad you liked it!🫶👍
Brilliant, as usual!
Thank you 🤝
Thanks that's the easiest finger joint jig I have seen plus using double sided tape,, really helpful hack's, I will be copying a few of them, thanks for sharing
Glad it was helpful!😊
Totally Awesome!
Well done!
Thank you! Cheers!🫶
thank you. wonderful video.
Glad you enjoyed it!🫶👍👋
Здравствуйте Александр🤝! Жаль что я уже их видел😔😭но за каждый отдельно лайк! 👍👍👍👍👍👍👍👍👍
Привет 👋 Было много дел по дому)) решил что у меня много интересного 😁 сделал сборник 👍 Владимир 🤝
@MA-SH понимаю, я тоже два дня ветки перерабатывал, обрезал сад, я сделал себе дробилку, теперь дробью их и разбрасываю по огороду, к весне удобрение, как в лесу
@MA-SH интересного у вас много! 👍
Это крутая штука, мне такую не где применить))
Спасибо 🫶
Great hacks every one of them useful thanks for shearing
Glad you found them useful!😊
I like the use of the countersunk screw for locking. That featherboard is excellent too. I have made many and they usually get discarded, but that’s a good solution. 👍🏻
Hello 👋 Thank you very much 🤝
ALL GREAT IDEAS WELL DONE
Glad you like them!🤝
Fantastic! Well done! Seen some before but most are new. Nice setup too! Thanks.
Thank you very much!🤝
Просто супер, высший класс.
Владимир, огромное спасибо 🤝
Wow, grabbing that small piece from the table saw like that you will be hacking fingers very quick.
Hello 👋 Thank you my friend 🫶👍
Excelente 😉
Obrigado 😃
Who sells that buzzing red X that warns you you're about to make a mistake? That'd make a great Christmas gift.
😂👍
Some of these would be super useful for work I'm doing now. Any chance you can add timestamps/chapters so we can jump to specific parts when we revisit the video when we're ready to make things?
Hello, unfortunately I do not know how to do this, maybe I will learn later! Thanks
@@MA-SH it's actually quite easy! You just go to your video and edit the description and do something like
00:00 - Intro
00:20 - Router box joint jig
1:44 - Router guide rail
2:57 - Router sled
etc etc.
Where 00:00 is minutes:seconds so 00:20 would mean 20 seconds into the video.
You just have to make sure you start the list with the 00:00 - Intro (or whatever text you want) because it gives TH-cam a time reference of what all the other numbers are in reference to.
@@MA-SH Here's one for this video. Just copy and paste this list of timestamps/titles into your video description and edit the titles as you'd like them to be then save! Now your video will have chapters users can jump to! It's a little bit of effort to do it for every video but as someone that uses TH-cam more than TV I can personally say it makes the experience so much better.
Just my little thanks for the cool tricks you shared! Can't wait to use that router spline and the box/finger joint. I'm getting ready to make a bunch of drawer boxes and that's going to save me so much time!
00:00 - Router spline Jig
2:12 - Drill lathe
3:25 - Flexible wood
4:31 - Bandsaw peg jig
5:43 - Router jib for square template
6:47 - Router box/finger joint jig
7:55 - Wood screw jig
8:30 - Dowel jig
9:55 - Marking gauge
11:38 - Corner drill guide
12:51 - Magnetic handsaw guide
14:25 - Table saw circle cutting sled
17:20 - Table saw lathe sled
21:01 - DIY Featherboard
Mọi thứ đều tuyệt vời cám ơn bạn đã chia sẻ ❤🎉❤🎉
Hello 👋 Thank you my friend 🫶
You should have put the marked side down for the acrylic on the dowel jig.
That way, you won't get alignment distortions from parallax through the acrylic.
Thanks
Cool idea 💡
Thank you ❤️😇
SUPER !!!!
Thank you! Cheers!👍
Es extraordinario. Felicidades
Thank you 🫶
👏👏👍🤝 респект!!
Вячеслав огромное спасибо 🤝
THANK U FOR INFO
Good luck!🫶
OK for people who have not been woodworking too long. To fancy for me, and some quite time consuming. But what works, can't argue with that.
Thank you buddy 👍
Great video learned a lot. What kind of blade are you running in your mitre saw?
Hello 👋 Thanks !Saw blade Metabo 628066000
Think you man a 👍👌
Hello 👋 Thank you bro 👍
MM77 Approved 👍🏼 👍🏼
Thank you my friend 🤝
Super Ideen dabei. Direkt einmal testen
Unbedingt!🫶
What brand of table saw are you using? What model?
Hello 👋 BLACK+DECKER BES700
If you used a dovetail bit in the first one you could make false dovetails
Yes friend, thanks 👍
супер! чем обрабатываете изделие? льняным ?
Здравствуйте, спасибо! Масло с воском для столешниц!
👍🏻👍🏻🌟🌟🌟🌟
👍🫶
Qual utilidade desse objeto produzido no minuto 4:13??
Decorate
Sensacional
Thank you 🫶
22:34 how can you make it ?
Hello 👋th-cam.com/video/6Vu3L2B-f5U/w-d-xo.htmlsi=IMpWEaZnO6ic3z-a
😃😃😃😃
🫶😁
Where's the hack about putting the blade guard on and using push sticks so you don't cut your fingers off.
😱👍
14:45 Did homeboy really just tap wood...?
The way you set up the comb was wrong, it did not apply any pressure on the piece being cut (which is its only purpose) but hopefully it did not, because it would have pinched the offcut onto the blade and made a hell of a projectile!!🤦♂️ should have been kept in front of the blade, letting the offcut free. You know the comb is doing its job when you see the teeth move slightly as you push the workpiece.
Ok, thanks bro 👍
Comb? It’s a diy feather board. How much of a jackass do you have to be to correct someone on something that you don’t even know the proper name of.
The way he set it up the first time was correct. Then be moved it for the other piece.
@marktilton7964 ✌
clicked off the video at 00:22, this should be flagged on youtube for extremely dangerous use of powertools. I don't care what you're wearing. Don't reach over a live blade.
Ok, thanks
@@MA-SH honestly, respect for taking the time to respond to so many people...I overreact a lot, I just want people to be safe
Yeah, my eyes went really wide at that. I see this in other videos as well. People get far too casual with this sort of thing- even those who have been doing it a long time. Movement while tools are in action should be deliberate.
@ 4:31 Are you kidding me? You're going to get fingers cut off!!!
No friend 🤲
I really dig that spline jig.
Thank you bro 👍
@@MA-SH Dude I've been watching your channel for a long time. In the beginning it was mostly cheesy click-bait stuff. But the last couple months? You're leveling up HARD. I actually bought a couple trim routers to try and build some of your jigs.
You should definitely make at least a "MA-SH Handheld router jig" playlist. Hell, I'd through you some $ for formal plans if you did it.
Thanks buddy, I'm flattered!
😊
🫶😇
🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠
👍😊
I like your videos but a little instrumental input would be appreciated
Thank you my friend 👍
🤝🫶👍
BOM
Thank you 🫶
動画では、SVO to doのパターンを第5文型（SVOC）として説明しているが、受験業界には、SVO to doは、第5文型ではなく、基本5文型のいづれにも当てはまらない、特殊な文型と考えている勢力が存在するらしい。SVO to doを第5文型（SVOC）として認めない理由としては、SVO to doのto doは、目的格補語の状態を表していないし、O = to doの関係も認められないからというものらしい。補語は、主語や目的語を説明するものであり、第2文型（SVC）では、S＝C、第5文型では、O＝Cの関係が認められるという伝統的な学校英文法の説明からすると、確かに、SVO to doでは、O = to doの関係は見られない。小生は、動画と同様、SVO to doのパターンを第5文型（SVOC）として位置付けるべきだと思う。そのため、補語についての定義的説明は、主語や目的語の内容を説明するものという従来の教え方ではなく、補語とは、動詞が必要とする追加的情報を提供するものであるという説明に変更した方がよいと思う。このように補語を定義すれば、SVO to doも、第5文型(SVOC)の一つとして説明することができる。
From the point of view of banal erudition, you ignore the tendencies of paradoxical illusions!