How to Fix Creaking BMX Cranks @ Harvester Bikes
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- A little tutorial I did on how to fix creaking BMX cranks. Lots of customers complain about a weird noise coming from their 3 piece cranks. This tutorial shows you the proper tools to use to fix these easy problem. Thanks for watching.
Camera man: Alex Gavrilov
![[LIVE] : ONE ลุมพินี 82 วันนี้!! คู่เอก | ยอดไอคิว vs อับดัลลาห์](http://i.ytimg.com/vi/hSsyTl_9bqs/mqdefault.jpg)
It worked !!!!!!!
The whole time I thought it was the bearings or something
Yesss!! I thought my bike was broken or something helped a lot
thanks man, my cranks started creaking after i went to some dirt jumps
Same with me
The dust gets into them
Same bro
Lol same
Same
Thanks for sharing! My 2 month old big ripper started creaking all of a sudden when I would pedal standing up and it was driving me crazy. I tried greasing and tightening the pedals, and taking tension off the chain. Neither worked. Tried this and viola!! Nice and quiet!
My framed 29er is giving me issues too
This vid was posted 5 years ago and now its finally helping me
Fix my issues I was having on a brand new Cult Devotion! Thanks a bunch!!
Thanks bro I appreciate it I thought u didn’t have to grease right there and the creak was driving me crazy thank u
The same shyt as well did me the same way.
I was wondering how to fix my creaking on my cranks I'll definitely try this
Yes! Ive had about two months of creaking up until now. Thanks mate
I dig the oldschool montreal expos hat and appreciate the knowledge.
thanks for the video man now I can ride with peace and quiet.
Worked, thanks. Thought my sprocket was bent first, then perhaps it was my pedals. In the end, all i needed was some grease on the crank spindle.
Just bought a labomba worked fine took it back the next day because it was creaking and clicking. Now he loosened the chain and it's doing the same stuff all over again . I might try this
Perfect video. Just sorted by Stolen Saint cranks. Thank you
I remember when I had my old gt bmx I was hill bombing and both of the pedals fell right off the bike. Turns out there was a 2 pieces of the thread missing, my uncle welded the pedal on and I sold the bike
nelson griggz I hope they knew about the make shift 1 piece crank lmaoo
@@dfuma213 yeah hope you didn't sell it from home, they might be stopping bye xD
easier than most videos I hv seen
Thank you for making this video! I found it very helpful👍🏻
I see i dont use enough grease.. thanks man:)
thanks man, you saved my ass
thank you so much i thought it was the bottom brackets
Can you show us how much to tighten the pedal axle ? How much is too much ? How easy should it spin?
This video is a life saver
I want to have a bmx chrome again probably expensive but that look can last forever care for properly.
Nice one, worked for me.
Thanks
1st comment luv ya guys u deserve more subs u should do a giveaway
Hey thanks for the awesome video. Can I use white lithium grease?
Thanks mate!
I always tighten my cranks but I never greased it... Finally no creaking.
Yeah when I ride my 22mm Odyssey bb with my eclat Maverick cranks I get a sound on the right side mostly sounding like creaking but also popping or something so I take everything apart an retighten the sprocket an pedals make sure everything is okay then is fine for about 10 mins of solid feeling setup then happens again
🚴♂️☁️☁️☁️Creak,clunk, Pop!
🤔 WTF, MAN!?
🚴♂️☁️☁️☁️☁️☁️☁️ clunk.
👈🤨 Lower your tone when talking to me, Gary!
😂 That creaking and popping will have you cursing your bike out.
I'm gonna try this when I get off work I thought my bearings were bad I just started looking for new cranks lol
Great video!
Yo good looking. It worked out great
sooooo what kinda grease???? ive heard a lot its different type of grease idk mane
Great video. If you wanted to, could you only grease the spindle on the non sprocket side to avoid needing to loosen the wheel?
The side that creaks is usually on the chain side.
My cranks are not creaking but they are making a loud noise when I peddle to the right side I have made sure they are nice and tight and together and they are still making loud noises and it feels weird to peddle how could I fix this ?
Jak Lunt I have the same problem
Jak Lunt its probably loose gravel stuck on the inside of the bearing just take them out wipe them down with a rag and regrease them.
Jak Lunt do u have sealed bearings or unsealed
Josh Galehouse i have the same issue mine are sealed
Jak Lunt me too same it pisses me off
So my cranks are making a loud strange sound. Last time it made that sound my cranks fell clean off. It's not much of a creaking but more of a clacking, like something is hitting together but I don't feel anything hitting. Idk what to do..
DEREXII I’ve got the same problem and don’t know how to fix it
Maybe the bolt that holds the crank arms onto the bottom bracket are loose. Tighten them, and use blue thread locker to keep them tight.
Maybe the bottom bracket is loose, try tightening the bottom bracket, or perhaps the bearings are dry. If so, try greasing the bottom bracket bearings.
Basically, if the crank arms are tight, and the bottom bracket adjustment is correct, not loose, and you are hearing creaking, and feeling grinding, its bottom bracket bearings. The bearings may just need greased, they may need to be replaced. They take a beating!
Do those Alan keys come with a free mechanical advantage.. Looks like they do😉👍
Does it matter what kind of grease I use?
Sick hat.
Thank man big help
Thanks ☺️
and now imma gonna charge this man 20000$ now
What grease should I use
can i use lube instead of grease?
Thanks so much
So was homie just not running a sprocket bolt??
why would you put lock-tight on your cranks what if you get new ones
how do you take them off
blue loctite
Not on the cranks, blue thread locker on the bolts.
Heat
I don't understand how a non moving/rotating part will squeak? The arm is mounted on the rotating part.
Metal on metal action
So I tightened them but it got worse chain keeps falling and keeps getting stuck
Why did you loosen the back wheel
To take off the chain...
Ive bought my first bike recently and after a week appears noise when pedaling like at 4:48. Is it okay? Without a chain i have zero noise, rear hub seems okay, bb is sealed. Could it be chain? Sorry for bad English.
its fine all my bikes do that
Maybe the chain is a little loose. Maybe the chain is too tight. The front chain drive sprocket might need spacers, to line up exactly with the rear sprocket. Sometimes replacing the rear wheel, the wheel is not exactly straight, causing a little offset angle between the sprocket on the rear wheel and the chain, and that will cause some grinding noises.
Also, some chain lubes are heavier, and thicker, and some are thin. The thicker chain lubes can help to quiet noisy chains. Sometimes, inexpensive sprockets, front or rear, will cause chain grinding noises.
Can i use solidol ?
what jack are you using? im wanting to buy a bike stand and cant get any real adivice, ,,and do you have to loosen chain?
I took my bike to the shop and brought a new chain but it still made the same noise they said its the back wheel do I trust them or nah
What kind of grease will that red car grease work
For some reason I tried it but it didn't work. When ever I pedal down it squeaks like its coming from the front end or something? I can only think I've over tightened something. Some help please 🙏
I have to same problem, did you fix it?
@@bigautist3731 yh bro I just greased every mf thing, even the bolts and anything that screws in,
@@jameszhou7112 ok, i found out i have a different problem, i need to take apart my pedals and grease everything in therr
Is it dangerous if it does that sound
I STRIPPED MY BOLTS THEY WHERE TOO TIGHT OF COMPRESSION CAP THINGY :/
Same how do i fix it
@@ethan5.4s89 dont think you can 😬😬
If just the bolt is stripped, you can buy a new bolt, if the threads in the bottom bracket are stripped, you buy a new bottom bracket. You could bring it to a machine shop to get rethreaded, but would cost too much.
I have a question... is that a sealed or unsealed bottom bracket?
My $600 bike has the exact same bottom bracket and it’s been making a creaking noice whenever I pedal. My guess is that there’s sand trapped inside the bearings but I’m not sure how to clean it. And how can I replace it with a sealed bottom bracket?
Make sure that it is NOT the pedals. If you greased the crank arms as shown in this video, and are certain that it is the bottom bracket, then you can disassemble the bottom bracket, and grease the bearings. Park Tools has excellent videos posted on TH-cam which shows how to work on bicycles.
Where do you get that grease from and what kind is it?
That is Park Tools grease. Any grease will do. Its on EBay, but its pricey.
Thanks
If your cranks are creaking is that a problem that could damage the bike or is it just annoying?
if you watch the video, you will notice it just needs to be greased
harvesterbmx yeah I did watch the vid but im new to bmx so I was curious if the creaking was a normal thing or if people just grease it cause they find it annoying
Mario-Gamer Justin It can be considered a normal thing cause it happens over a period of time from the grease drying or turning to shit. and yes people do not like this because it makes there bike sound like shit and im sure nobody like there bike sounding like that
Mario-Gamer Justin its so annoying you could crash.
My bike has a horrible noise when I peddle backwards what is it
What happens if you don't lube it
If I do this and something is still creaking, what do you think that might be? I’ve installed a new chain. As bike is second hand but I’ve rebuilt most of it. The chain was originally on the same sprocket on another bmx, jus switched cranks onto this bmx along with chain, the rear cassette is different to the original
Bottom bracket worn?
Would it be engine oil?
Mine keeps clicking every rotation and doing a drop and I have no clue on what could be causing it
i greased my headset and crank and everything else but my bmx is still making creaking noises im 80kg please help
I just dunked my bike in olive oil sounds like new now 👍
Dude idk what’s wrong with mine I will drive sidewalks and jump off them lots and every 30 seconds it will crack and go loose for a second and I loose my grip on pedals
Did this and now my cranks hardly spin ? And my chain isnt very tight either
Where can I get this kind of grease?
But why does greasing that help? lol there’s no friction there or anything on that piece you greased. I think you just tightened it up is what really fixed the issue.
No, the grease helps
What’s the grease he uses called
4:50 I don't like that noise when you stop the pedal and it makes a chainy sound
it’s supposed to make that sound
frosten those are called cassette wheels, they’re cheap and unreliable, get free coasters, they don’t make that sound and they r high quality
RGC_ryft RGC_ryft this is just totally false some riders like FC some riders like cassettes
Difference is a FC you don't have to pedal when going reverse/doing a fakie... with a cassette you do
Some ppl like FC's more some like cassettes more. NATHAN FUCKING WILLIAMS rides cassette and he might be the best at street
Where do you get this grease at?
Idk but I also had too many spacers lol I had switched out my cranks and kept the spacers
I have a knock on my 29inch when I peddle
WD40 won't do?
My sprocket is crooked now after I took it off
So is it bad to not fix it or is it just a sound. Cuz my bike just started makeing these sounds
I think it will wear it down after time... sorry for the late reply!
Tighten the crank arms bolts. If they are tight, and there is still a creaking noise, grease will dampen the noise, caused from the movement between the crank arm and the bottom bracket. There will be minimal wear caused from the tiny amount of movement between the crank arm and the bottom bracket. So, no, there will be minimal wear on the crank arm, if tightenened properly. The bottom bracket spindles are case hardened drop forged steel, and ain't gonna be affected. In my humble opinion. Ride on!
Umm my pinch bolt is very tight, help
What if I don’t have a ratchet is there another solution to lossening the wheel
Go buy a ratchet
Oxy acetylene torch might do the job. 😉
Can i put WD40 instead of grease?
no
Can someone help? I greased my cranks spindles like 3 times so far. And the creaks go away for about half hour. Then the creaks start to come back. I'm 160 lbs. Got the bike 5 months ago. A fitbikeco
I have same issue so gave up and got mtb hollowtech 2 cranks perfect no issue
I got a BMX bike used I tightened the chain I went on a ride and when I go fast something makes a noise and I checked it and my chain was loose again does this fix that problem?
If its a new bike, the chain will stretch. New chains have to be re-tightened a few times.
If its an older chain, then maybe that wheel just was not tightened enough. Make sure there is no grease on the frame, at the wheel drop out.
It doesnt work i clean my entire bottom bracket greased it all up and put ot back together. It still makes the creaky noise.
does it matter what grease?
Mason Hall I have a same quastion
Any grease will work. I use waterproof marine type wheel bearing grease. The same type used on wheel bearings for boat trailers. You can get It at Wal-Mart.
The grease used in this video is Park Tools brand. Its excellent grease, but costs a lot more than buying the cartridges that are sized for use in grease guns.
My cranks creak but it’s not that noticeable so I just deal with it
Can you use canola oil?
@@yuuki_32 oh shid, already did it 😬😬😬 but i kinda got em rinsed cause of rain anrld runnin through puddles, thanks for the answer tho.
@@yuuki_32oh i kinda figured it was expensive, guess now tho 😂 thanks!
Yes, to make a salad. I prefer olive oil.
Are you able to use some wd40 instead of Greece?
No, it will get worse with time if you do that
Mine are like a scrape noise
One of my crank arms hit my frame when I pedal do u know how to fix this
s p a c e r s
@@oliverholowack9198 my crank arm is bent in the way
s p a c e r s
@@michaelmcknight8878 If the crankarm is bent so bad that it hits the frame, its time for a new crankarm, don't ya think?
A17S sct just buy new cranks but if they are too expensive for you buy more spacers
Thank god I didn’t wanna buy and other gt performer so much money
What about a popping noise ?
Only on the downstrock of the crank ?
Can i use like spray oil but it's not oil it's for chain's and bolts
Is a 3pice beter then a 1pice
Zane Groenewald yes
yessss
I don't have those for my bmx ☺️😨☹️
Three piece cranks are such a pain in the ass.
Thats with locked bearings i dont have locked bearings
I hear a loud noise when I waz riding my bmx couldn’t tell where the noise came from but I waz a loud clack noise.. someone please help me
Sherdell Joseph probably your bottom bracket.. do you feel anything when you pedal?
I like found out where the noise came from, it’s the back rim
Sherdell Joseph I have the same problem
Phoenix Taylor the noise waz cumin from the cranks
I had to replace the hold crank system and then I bought a new back rim to solve the problems