Awesome run! Be prepared to start replacing axles. Mine with the MGM on 12s broke 2 front axles. Also hit 76mph on pavement with an 18t pinion and it had more in it. You're absolutely right that this thing is a dangerous beast!
Awesome Run Joe👍🏼👍🏼👍🏼👍🏼. Thanks to your video, I may be in HotWater once my wife finds out my spending on RC’s. Especially, once she sees my DBXLE 2.0 with the new MAX4 combo on 12S. Your videos, are MY Mental Therapy cure. (RC Daily Fix) 😂. Now I ordered the MAX4 combo with 2 new 6S batteries and galore VITAVON parts to Upgrade. Thanks. As always Joe, KEEP UP THE GREAT CONTENT. 👍🏼🤙🏼👍🏼🤙🏼👍🏼🤙🏼👍🏼🤙🏼
Thanks a lot Joe for not making us wait any longer to see that 12s system...man...nice asf lol once you get the gear ratio you want, run that system a little warmer...have a blast bro
Very nice runs Joe! Pins are usually an easy replacement as you know! Watching a big rig like that get tossed around like that by a power system is just nuts.
If you do, take my advice and ONLY run it on grass and dirt. If you run it on the street and slide into a curb, you're pretty much guaranteed several hundred dollars in damage-ask me how I know 😅. Also, part support for this girl is terrible. I ordered parts for repair back in late May/early June, and today is September 18, and I'm still waiting for some of them.
You always say "you guys" bro I don't think any of us can do it like you do, your knowledge is superior.... awesome DBXL can't wait to see more of it....👍👍
Man I want a DBXLE so bad man. Yours is super nice bro great job💯I want to suggest you go down to your local fastenal and get hardened pins you can press in the axles. This is what I did with my EMaxx that kept shredding pins from the power of the castle system.
@@ExocagedRC I can get you a part # for the pins that would fit and work. I think they are something crazy like a 2500lb tensile strength or more. I’m an industrial maintenance tech so I have access to quite a bit of unusual hardware through our hardware supplier. I’ll comment this week once I’m back at work and have a part #
I would really like to see what the data log looks like and what kinda peak amps it’s hitting on those runs please show us the computer graph in a real quick video!!! I want to build a low altitude aerial capable high speed weapon.
I just got one of these used. Had the aluminum motor mounts etc. MAX4 560kv! I think it’s geared 22 or 22 tooth? Came with a box of gears. What do you recommend I use for steering arm etc when replacing the servo? Putting a savox monster in it. What a beast of a car! It IS kinda all over the place. It came With a futaba 7pxr and the reciever it comes with. Can’t figure out if it has gyro or not! 🤪
Good point when you say 'be carefull'. These are machines, and when you tune them, they are dangerous machines. On several occasions, i have seen people driving insanely fast rc's on grass fields like the one in this video, but with kids around, people, and i asked about fail-safe and never got a response. I have a Fireteam and it's quite heavy and quite fast, and i don't even know if it will stop when i lose connection. Do you have intel about this?
Buddy I’m always super cautious with these big fast machines. The vast majority of the time the trucks simply go to a neutral setting. I haven’t messed with it yet to test but take the wheels off and drive it on a table then turn off the transmitter and see.
I just put a max 4 in my Limitless and have been snapping stuff off ever since. But I'll just keep replacing parts until it don't break again. My temps stay so low also. My Castle equipment would always be smoking hot then burn my car up😡
I think the GPS was stuck on that second run. Just because that point 1 should have been a different number. Because of the different variables of the ground
Have u looked into MIP cvd axle pins? The old, rc10T3ft had cvd pin problems when we raced. MIP came out with a kit that had .003 oversized pins u put in that NEVER broke nor came out. Maybe something to hit Vitavon up on IF mip isnt available anymore 🤷.
Awesome run. Great to finally see a manufacturer step up and offer us a great 12S option, such as Hobbywing. Do you think you can fit that size motor and ESC, on a Kraton 8S?
What gearing????? I just put this combo in with 25/50 and the front tires ballooned way too bad (badland mx43 beadlocks). I saw people said 2:1 was way conservative. I just put a saga 30t pinion with the stock 50t Spur and emptied diff from stock 50k and filled it with 500k. I’m not sure what to expect, waiting for loctite to dry 😂
@@ExocagedRC I think I remember that segment. Do you think the DDM did locker can't handle a lot of power? Also, buying Vitavon from you as opposed to direct, would it arrive faster considering that you are on the state side?
Had the same thing with my Hitec 845 servos. They don’t get along with AVC at all in my experience! I ended up disabling the avc completely. (not just turning it down) I’m betting you’re running the 6100at receiver? The google instructed me how to disable! I would gladly trade all my avc receivers for sr515’s
@@ExocagedRC yeah the esc goes up to 12S. ok thanks. im getting a dbxle 2 tmw. any upgrades you recommend to drivetrain and also that drag bar is cool. lmk
One guy on TH-cam hit 90 something on the salt flats withe the same rig and set up. Not sure the gearing. Was 92 I believe. Freaking crazy for a 1/5 off road
Dude those stupid dog bone pins drive me insane! I’ve had 3 or 4 coming out in my Sledge CVD’s... Awesome car and setup though, man! Wow that thing rips! And at its size!
"We're not going to power this thing up inside as it's just too much". ...Proceeds to power it up inside... I suppose I would have that little willpower with a 12s car :)
Hey Joe! That beast is real dangerous! Beware of the squared fense in the centre of the field... This "4WD - RC - WEAPON" will kill it 100%... And Joe, your legs are in REAL danger! 🥺
Awesome run! Be prepared to start replacing axles. Mine with the MGM on 12s broke 2 front axles. Also hit 76mph on pavement with an 18t pinion and it had more in it. You're absolutely right that this thing is a dangerous beast!
Yeah buddy. I think the pin is replaceable on it so I’ll fix that and get the Vitavon axles when they are available.
An MGM/Lehner combo produces twice as much power
@@ExocagedRC what pinion and spur you running and I would love to get a esc mount like that.
I can't stop watching this video, because of your video and another TH-cam channel i made the purchase. Super impressive esc
Awesome
That thing is an actual weapon, it covers ground so quickly and relentlessly.
i like how much you respect the power of these r.c.s n how much you care about the fans you rock exo ty for all you do
Thank you buddy. These vehicles, even the little ones can really hurt.
Awesome Run Joe👍🏼👍🏼👍🏼👍🏼. Thanks to your video, I may be in HotWater once my wife finds out my spending on RC’s. Especially, once she sees my DBXLE 2.0 with the new MAX4 combo on 12S.
Your videos, are MY Mental Therapy cure. (RC Daily Fix) 😂. Now I ordered the MAX4 combo with 2 new 6S batteries and galore VITAVON parts to Upgrade. Thanks. As always Joe, KEEP UP THE GREAT CONTENT. 👍🏼🤙🏼👍🏼🤙🏼👍🏼🤙🏼👍🏼🤙🏼
Dude that’s awesome. Yeah buddy it’s not cheap but a lot of fun. Just please be careful with something like this around.
Yeah be prepared lol, but you know the pleasure will be worth the pain!
Thanks a lot Joe for not making us wait any longer to see that 12s system...man...nice asf lol once you get the gear ratio you want, run that system a little warmer...have a blast bro
I hope it stays cool when I get to really drive it. The 25t pinion seems to be good for what I want.
Very nice runs Joe! Pins are usually an easy replacement as you know! Watching a big rig like that get tossed around like that by a power system is just nuts.
Wow! That was just RIDICULOUS! Now I feel like getting a DBXLE 😅😂. Simply amazing
If you do, take my advice and ONLY run it on grass and dirt. If you run it on the street and slide into a curb, you're pretty much guaranteed several hundred dollars in damage-ask me how I know 😅. Also, part support for this girl is terrible. I ordered parts for repair back in late May/early June, and today is September 18, and I'm still waiting for some of them.
@@Diaszuranainteresting! I was about to buy a dbxle too, the replacement parts are expensive?
@@pierre-lucgrenon1530 Yes. And they're never in stock
Smooth ass power and a lot of it. Im going to say 70mph without looking. 👊💪💣
You always say "you guys" bro I don't think any of us can do it like you do, your knowledge is superior.... awesome DBXL can't wait to see more of it....👍👍
That 12s looks like it would go great with those primal RC tires.
It would blow them up for sure
Get to the table Joe! That setup looks wicked brother!!!
Man I want a DBXLE so bad man. Yours is super nice bro great job💯I want to suggest you go down to your local fastenal and get hardened pins you can press in the axles. This is what I did with my EMaxx that kept shredding pins from the power of the castle system.
I cut a drill bit and made a new pin. I have no idea if it will last or not.
@@ExocagedRC I can get you a part # for the pins that would fit and work. I think they are something crazy like a 2500lb tensile strength or more. I’m an industrial maintenance tech so I have access to quite a bit of unusual hardware through our hardware supplier. I’ll comment this week once I’m back at work and have a part #
Craziness mixed with awesome=badass man... Awesome run
Can you imagine that beast hitting your leg or hitting anything! Awesome! Be careful Joe!
What ever it hit would be broken or gone
Can you say reconstructive surgery?
If they can even find your ankle bone!
Thanks for the video every morning
Thank you for watching
@@ExocagedRC I look forward to it
Awesomeness describes it!💯👊🏻👊🏻👊🏻
Dope man I have a udr and also thinking of getting this buggy too
Man, that thing is sick!
That's insane fast beautiful. 👍👍💯💯🔥🔥🔥🔥🔥🔥🔥🔥
That 560kv and max 4 esc are on a whole different level. Insane.
I would really like to see what the data log looks like and what kinda peak amps it’s hitting on those runs please show us the computer graph in a real quick video!!!
I want to build a low altitude aerial capable high speed weapon.
Joe, try some Loctite 638 retaining compound on the pins. Had a problem with a few pins on my Sledge and the Loctite solved it.
That thing is a BEAST 🔥
Holy smokes perfect power!!!!! Wow
Yeah it’s right for sure
Joe this is the setup!!!
Your servo got nervous from feeling the 12s power run through it for first time
😂😂
You could say it couldn't handle the hobbywing style 😎
It sounds like a plane when it when by, Crazy fast
You're Stoked!
I just got one of these used. Had the aluminum motor mounts etc. MAX4 560kv! I think it’s geared 22 or 22 tooth? Came with a box of gears.
What do you recommend I use for steering arm etc when replacing the servo? Putting a savox monster in it.
What a beast of a car!
It IS kinda all over the place. It came
With a futaba 7pxr and the reciever it comes with. Can’t figure out if it has gyro or not! 🤪
where can i find 10mm motor shaft pinion gears? thanks
What a beast it is 🤩🤩
That’s awesome great run
Welcome to the 12s/ high voltage world it only gets faster from here!!!!
This thing has so much more in it.
It is hard to explain how much more dangerous at Big truck going that fast really is… it is Freaking Awesome
We’ve done the same setup with full vitavon. Does the stock motor mount/slide accept a 25T pinion?
Good point when you say 'be carefull'. These are machines, and when you tune them, they are dangerous machines. On several occasions, i have seen people driving insanely fast rc's on grass fields like the one in this video, but with kids around, people, and i asked about fail-safe and never got a response. I have a Fireteam and it's quite heavy and quite fast, and i don't even know if it will stop when i lose connection. Do you have intel about this?
Buddy I’m always super cautious with these big fast machines. The vast majority of the time the trucks simply go to a neutral setting. I haven’t messed with it yet to test but take the wheels off and drive it on a table then turn off the transmitter and see.
@@ExocagedRC Thanks for response. That's actually a good idea. Will try that.
I just put a max 4 in my Limitless and have been snapping stuff off ever since. But I'll just keep replacing parts until it don't break again. My temps stay so low also. My Castle equipment would always be smoking hot then burn my car up😡
I think the GPS was stuck on that second run. Just because that point 1 should have been a different number. Because of the different variables of the ground
It was reading the peak speed and it seems I didn’t exceed the 66.1 to make it go higher. But yeah it looked faster to me as well
Thanks for your videos! Very impressive. What is the best pinion and spur for 12S Hobby Wing 70125 and EZrun max4 ?
What diff fluid weights are you using?
Have u looked into MIP cvd axle pins? The old, rc10T3ft had cvd pin problems when we raced. MIP came out with a kit that had .003 oversized pins u put in that NEVER broke nor came out.
Maybe something to hit Vitavon up on IF mip isnt available anymore 🤷.
I made one last night out of a drill bit.
Awesome run. Great to finally see a manufacturer step up and offer us a great 12S option, such as Hobbywing. Do you think you can fit that size motor and ESC, on a Kraton 8S?
won't fit, to big..
esc will fit. motor won't
That sure looks like 12s 🚀🚀🚀🚀
You have the 560kv motor, would the 800kv or 1100kv be faster? They have so many different combos
When you first installed the max 4 setup did you have to use the program card to change any settings ?
What gearing are you running I didn’t catch it? Thanks
What gearing????? I just put this combo in with 25/50 and the front tires ballooned way too bad (badland mx43 beadlocks). I saw people said 2:1 was way conservative. I just put a saga 30t pinion with the stock 50t Spur and emptied diff from stock 50k and filled it with 500k. I’m not sure what to expect, waiting for loctite to dry 😂
I Think that about the same as I have in it
Nice build.what gearing did you go with?
What's the biggest pinion geared allowed to use with that transmission case?
Now that’s awesome!!!
Hell yea🤙..On grass that is FAST..We need track runs lol
I got it fixed and yeah I want to 12s this monster on the track.
@@ExocagedRC 17s 🤞
Do you think that max 4 set up will fit outcast 8s?
I am trying out a diff locker in the center. What kind of fluid do you recommend for the front and rear. I waiting for the max 4 to come in?
Ear plugs. I tried a spool in the middle and broke it.
@@ExocagedRC I think I remember that segment. Do you think the DDM did locker can't handle a lot of power? Also, buying Vitavon from you as opposed to direct, would it arrive faster considering that you are on the state side?
Is it the servo or the radio system
would be crazy to see that set up in the x-maxx lol
Would wheelie like crazy at half throttle.. Probably wouldn't be much fun
just a though can Apoxy the pin in
They have a set screw. I replaced the pin.
Had the same thing with my Hitec 845 servos. They don’t get along with AVC at all in my experience! I ended up disabling the avc completely. (not just turning it down) I’m betting you’re running the 6100at receiver? The google instructed me how to disable! I would gladly trade all my avc receivers for sr515’s
This has a Flysky GT5 radio.
@@ExocagedRC is it a gyro receiver?
I wonder what speed you would have reached on the driveway next to the grass!
Hi mate great video have you got the link for the esc 12s and motor 560kv thanks thinking of doing the same bud
Yeah look in the description. I have links and more info on it
@@ExocagedRC thanks mate 👍 I want to know would the same setup like yours fit in my 30 degree north truck 1/5 OK 👍
Whole moly sounds like a dango vacuum cleaner lol 😆 😂
The hammers bro what a beast on 12s what wheels do you have running on there
would I get a similar result with a max5 esc 12s w/ 650kv motor?? trying to go 12S on a budget
If the esc can do it, the 650 is potentially faster than this. It’s higher kv
@@ExocagedRC yeah the esc goes up to 12S. ok thanks. im getting a dbxle 2 tmw. any upgrades you recommend to drivetrain and also that drag bar is cool. lmk
One guy on TH-cam hit 90 something on the salt flats withe the same rig and set up. Not sure the gearing. Was 92 I believe. Freaking crazy for a 1/5 off road
Yeah 100’s will not be hard at all with this new power.
What gearing are you running
I wanna do 12s on mine, what gear ratio should I go for off-road speed runs?? Thanks in advance
probably anything that gives a 1-1 ratio but that will be a lot of amps on an amp hungry vehicle.
What was your pinion and spur?
Stock spur and a 25t pinion
@@ExocagedRC I thought you were running 30T like your last video?
@@ExocagedRC appreciated if you can tell us if a 30T will fit?
Does the stock motor mount/slide accept a 25T pinion?
@@howardsadofsky7694 Biggest pinion you can fit on stock is 18t
You had a 12s Kraton Joe!
Sorta yeah but that esc was horrible so I never tried it successfully
@@ExocagedRC yep user error. Lol
Jeez that's insane
Those wheelies at speed are awesome
@@ExocagedRC you ain't kiddin....wooooooow
Nice!
Amazing!!
Awsome
Epic!
Bro I told you that pin was falling out ,that was pretty amazing tho
I missed it. But it’s fixed now.
Will you sell this one ?
sure but the cost is too much
@@ExocagedRC can’t put a price on happiness haha plus I’m sure you’ve built it. Saves me time from breaking a million times like my ryft.
What motor esc combo are you using?
Hobbywing MAX4 and a 560kV motor
The title literally says what it is.......🤯
Need 20 mill in the center and rear. 1 mill in the front diff.
That sounds like a jet.
Ahhhh that's crazy!
Luckily the pin is replaceable so I’ll make a new pin out of a drill bit
@@ExocagedRC yeah it shouldn't be to hard to fix back. I'd get a few extra shafts though
Wow that thing is nuts I love seeing my kraton fly by on 12s but this big beast Is just insane
Yeah you got that right
You have convinced me to order a 5t and throw this combo in it lol
8 gauge wires out of that monster esc? Talk about an oversight…. Nice setup though.
Actually 6
God bless America
Im not getting any sound brother
You may have an issue on your end.
1 t'day! 👍😁🛫
Mmmm I wonder who going to come out with a 400amp 24s combo lol
The Currie in the back😎
Yeah buddy. That first video went up yesterday
Muito forte kkkk caramba
Dude those stupid dog bone pins drive me insane! I’ve had 3 or 4 coming out in my Sledge CVD’s...
Awesome car and setup though, man! Wow that thing rips! And at its size!
Yeah but thats traxxas shit, not losi
😱🤯😃👍👌👍
Holy toledo
😱😱😱😱😱😱
"We're not going to power this thing up inside as it's just too much".
...Proceeds to power it up inside...
I suppose I would have that little willpower with a 12s car :)
Hey Joe! That beast is real dangerous! Beware of the squared fense in the centre of the field... This "4WD - RC - WEAPON" will kill it 100%... And Joe, your legs are in REAL danger! 🥺
Yeah I’ve almost hit that square area many times and I’m far away. Im using zoom on the camera.
That servo is just as gittery as my crack head neighbor that stole my address rock for ransom money lol
Gear it up Joe don't be scared.
I will just need a smaller spur gear
You all see that giant wasp
I got a reply saying I won a drawing for an ESC must reply to what's app .
Scam alert ⚠️
Bro when it drove by I'm pretty sure I heard that thing queef. Weak and slow. Total beginner toy.
😆Just bullshitting.
80 would be impressive on that big of a machine
What gearing are you running
Stock spur and 25t pinion. Or maybe 22t, both get 70+ on this grass field