Retrofit Apple CarPlay in a Range Rover Evoque
ฝัง
- เผยแพร่เมื่อ 29 เม.ย. 2023
- In the first part of my two videos I would like to show you how I retrofit our Land Rover Range Rover Evoque from 2016 Apple CarPlay or Android Auto. Unfortunately, our Evoque did not come with an integrated CarPlay despite being a facelift model.
An installation of the ISUDAR CarPlay module is not difficult and also requires no special tools and can be done by anyone who does not have two left hands ;)
Unfortunately, after the Installation a problem occurred, which currently could not be fixed yet. The support of ISUDAR is already on the problem!
How it goes on and whether the whole thing will take a good end you will learn in the second part. This will be published as soon as the problem is fixed. (Or not)
But I can say one thing, that the module works much faster than on the Discovery 4 because of the newer screen ;)
I wish you all a nice Sunday and see you soon,
Peter
P.S.: If you want to pre checkout the ISUDAR website and the used module:
bit.ly/3Hpla6f
----------------------------------------------------------------------------------
🛠️ Tools I was using in this vide0 (Affiliate Links):
➡️ Plastic removal tools:
amzn.to/3ALSosB
➡️ Torx screwdriver:
amzn.to/3AF4xj7
----------------------------------------------------------------------------------
📸 Follow me on Instagram:
/ notthatkindofachannel
✅ Support me via PayPal:
www.paypal.com/paypalme/mrmir...
👍 If you find the video helpful, I would be very happy about a Like. If you want to know more about repairs or maintenance of a Land Rover Discovery 4 / LR4, please subscribe to my channel.
----------------------------------------------------------------------------------
⚠️ Please always pay attention to your own safety when working on a vehicle and never lie unsecured under a car! I do not accept any liability for the correctness of the information given in the videos or for damage caused by improper processing of products or by mistakes made during your own installation, nor for your personal safety! These videos are for entertainment purposes only and are not intended as instructions or for imitation!
#rangerover #rangeroverevoque #applecarplay #androidauto #retrofits #retrofitting #evoque #landrover #notthatkindofachannel #carrepair #carmaintenance #carupgrade #carupgrades - ยานยนต์และพาหนะ
![อยู่ได้แล้ว - LIPTA feat. Mirrr [OFFICIAL MV]](http://i.ytimg.com/vi/-9-hpntNym4/mqdefault.jpg)
![[#SHORTS CLIP] ครูอึ้ง กรรมการอึ้ง ฮ่าๆ l ซานิเบาได้เบา l One Playground](http://i.ytimg.com/vi/qeBTuMJs4t0/mqdefault.jpg)
🚨I recently tested another faster Apple CarPlay & Android Auto system with an 10" screen where don't need to dismantle the interior!
👉th-cam.com/video/QNBPixBGxyg/w-d-xo.html
servus Peter, thank you for the video, very useful. Please, could you confirm if the module (after replacement?) finally worked on your evoque?
Hi, maybe a video about updating factory navigation or just a maps. On my Evoque the maps are old and some new roads and squares are missing. Greate video's... keep going
Hello there! The video is very clear with all the instructions except for the dip switches on the back on the aftermarket carplay module. Do I need to switch on any of them ?? I’m fitting this for 2014 Evoque which don’t comes with navigation option in OEM system
Hi and thank you very much! I have to say, I don't know if this works with the system without navigation, as this menu item is necessary to start the Apple CarPlay or Android Auto system. The switches on the back were all off or at 0 in my case. all the best, Peter
Hi Peter, any update about this one? I've recently bought a RR Evoque 2016 with Bosch Car Radio and I'm looking to add Apple CarPlay. I've had an Isudar Stereo on my previous can and it worked very well (except for the bad quality of the integrated microphone). In this case it's only a Smartbox so the original system should remain the same. But I'm a bit worried about the reboot. And one more question, the blue pin cable that you disconnected from the monitor and didn't connect again, what is it? With this smartbox I will lose the original navigation software?
Indeed, the issue was resolved after acquiring a new module and a fresh connection cable from the supplier. However, be aware that upon installation, your original navigation functionality will be forfeited (referring to the blue cable you mentioned). Nonetheless, this wasn't a significant setback for me personally, as I primarily rely on Google or Apple Maps for navigation purposes.
Do you know what to do if you have a manual? Don’t see how this could be installed with gear stick mechanisms all in the way etc
Hey, I don't think it makes a difference whether you have an automatic or a manual gearbox, as the head unit remains the same. Therefore everything should work as usual. Many greetings, Peter
@@notthatkindofachannel thanks Peter! When i went to install the module, there was no space for it, as where yours is inserted i have all the manual gearbox mechanism :/
Hey, I have a Evoque 2012 where I dont have the navigation function, is it still possible to install that one?
Hey, if you have installed the navigation system, then this should be possible without any problems. If no sat nav is installed, this will not work with this system. All the best, Peter
Hi
I’m from Verona (Italy)
Have you solve the problem?
Thanks
Hey, no I’m sorry! There was no easy solution on the Evoque. The strange thing was, that this module worked fine in the Discovery 4 but not in the Evoque. Best, Peter
Hello Peter, may I know what is your original car system? Is that Harmon or bosch?
Hey, it's the Bosch system! Best, Peter
Any update on the reboot problem?
Hey @Data Storage! Yes I've to return the unit and after that I will get a new one. But this takes a bit. Best regards, Peter
@@notthatkindofachannel Thank you. Good luck!
Do you have a link for it?
Sure, but as I said I cannot recommend it at the moment! bit.ly/3IxJrro