Thank you. I plan to buy this Model next week, if still in stock. Need it for hauling with a trailer attached, plus next years mowing. Thanks again for your Great Review.
had mine since around '06, mowed with it last week. I've not been easy on it, nor have I done regular maintenance. I have one tire that's the original after all these years. Replaced the deck belt at least once. Replaced the drive belts couple weeks ago. Now isn't a good time to be purchasing mowers. I hope it keeps going, I am treating it better now. When or if it dies, I have no reservations about getting another one, but I hope that day doesn't come anytime soon.
Thanks for the comment! I just had my first "problem" last fall before putting it away, the cable for engaging the blades broke! Now that I had all winter to forget how it comes apart I will try to put a new one in! Great comment, thanks for watching!
I have the same on with a 19 hp Kohler engine. I bought mine newly used from a neighbor for $695. It’s been great I put gator blades on it a mulch plug. Once a year I change all the filters use synthetic oil and sharpen the blades. Another important thing I do is scrap the wet grass from the underside of the deck. And treat the areas that show oxidation with ospho rust inhibitor. And spray paint the areas under the deck. I use non ethanol gas and a fuel funnel that has a wire mush screen that traps all the dirt particles keep the fuel clean. I also blow grass off the deck and tractor after every use with a blow gun from my air compressor. All these things are the key to getting 10 plus years out of a lawn tractor
I bought my Pony from Lowe’s in 2011 for less than a grand. Have had no issues with it. Everything is still original except for the deck blade spindles and blades. Keep oil changed and clean air filters in it. I don’t wash mind all that much but will place a hose next to the deck at lowest setting and run blades to clean underside of deck. Never put the wash attachment on mine. Prior to this one my wife bought me an MTD lawn tractor from Lowe’s back in 93 after we got married. Had that till I got the Pony. Replaced the spindles on that one too and would have replaced the starter solenoid but the tranny went out before that. Engine was still in real good shape.
I bought an old model in about 2002 and I was always rough on it put about 200 hours on it without changing the oil and even ran it without oil for 3 or 4 hours. Bought a 2022 model and put it to the same work. Never have any issues with them
I mowed 4 or 5 feet of grass did have to mowed at the first setting so it won’t died then 2 setting did fantastic job. It’s been a great mower I love mine I prefer this over a John Deere or any expensive name. Brand I love mine
Nice to hear another success story, most comments are not so good. Now a days it's a gamble if you get a good one or a lemon it seems. Thanks for watching and the comment!
I think the older ones are built better. I walked by a brand new one recently, the tires were cheesy. I didn't crack the hood to see what they are powered by now. Thanks for the comment!
@captainprairie5790 would u buy a used one for 500? It has Briggs and Stratton 17.5 hp and 7 speed transmission? Debating on this or the John deer la115.
@nancyweare8252 I have had a similar issue with mine but it seems to come and go. Sometimes when I want to go fast I have to pull the pedal back with my heel. Not been able to find a fix for it
GREAT QUESTION!! Yes you can. There are 3 positions on the ignition. After turning the motor on the key goes back but if you put it in the middle position, there is a yellow triangle button to push that will let you mow backwards. Without that, the motor will turn off if you put it in reverse.
I gotta say I got one 2 yrs ago and have had multiple issues..Alot of time down, several self and store repairs still tryin to get it goin...had to buy a push mower to cut in the mean time..customer service not real helpful, website makes dufficult or even impossible to talk to a human to rectify problems. Next time will definetly get another brand
Not an uncommon comment. My son has the model below the Pony, T30 or something like that, he doesn't do all the maintenance he should and it's still running. He doesn't have half the yard I mow either though. Thanks for the comment!
Steering mechanisms suck with it other then that it’s a pretty basic solid mower I bought one new from lows 9 years ago an only real problem is the play in the steering and it’s not the shaft it’s the drag link I also like it a lot more sense I unhooked the safety feature to allow me to back up while the blades are on makes it much better
Thanks for the comment! Fortunately I have not had the steering wear out on mine yet. The only issues I have had is the deck engagement cable broke right after I made this video and the blades need replacing.
@@captainprairie5790 Iv been though a few belts and blades I had to replace the transmission pulley an drive belt not long ago and I keep this mower in a shed, so it still looks pretty new for 9 years old the only other thing I hate is that this deck does not have scalping wheels also my deck Shute broke off so need a new one they run about 50 bucks lol
@@corywagner9733 troybilt must have upgraded since yours and mine, I have the wheels on the deck and a reverse safety override on the key switch. Sounds like you take care of yours! Storing them inside helps a ton!
@@vicentee2687 On the key switch, there are two settings after starting it. If you turn the key back to the center position there should be a yellow triangle button to push, this will allow you to use the blades while in reverse. There is a light that will be on when this function is engaged.
This one is put neart 5 years old, I stopped by the Runnings where I bought it from. The new Ponys seem to have cheaper tires on them, didn't look too deep into the rest of them. Thanks for the comment
Well that ain't good man! I have had a stick get into the belt and throw it off the pulley before. You will prolly have to look for a bent pulley assembly or something like that. Hope it works out man
@@captainprairie5790 well I got in it CHEAP CHEAP.... only 77 hours. $800... so if they fix that or that pulley under the battery and tire it will be well worth it.. because my craftsman has +750 hours and now it won't start after I put $100 spindle and pulley on it
@@captainprairie5790 I looked on TH-cam and it looked like a common problem, it is fixable but I am to sick to work on it myself. I bought it from Lowes here in Tomball Texas and they had so many complaints they quite selling them.LOL.
@@williamwethington7905 Wow!!! How old was your mower, what year did you get it??? Hope mine ain't in that time frame, but I have used it purdy regular and demanding and no probs yet. Fingers crossed!!!
@@ToothlessThedragon9 that looks like it's gonna be the big brother to the Pony. If I read the specs right, the 2246 has a bigger V twin engine and a couple inches wider deck. Looks like a brute!
Unfortunately i have heard that from a few folks. Glad I ain't one of them. If you get a good riding mower, let me know. Thanks for commenting and watching!
I signed up for the Runnings Credit Card (business) and I got $70 Gift Card for each "user" I added. Got enough Gift Cards to get this (plus a mower and BBQ grill) free!
I bought a new $3500 Troy Bilt riding mower. After 25 uses, the motor self-destructed. Turns out Troy Bilt is using Chinese-made engines. Taking it to their nearest "approved" warranty repair facility is 7-hours of driving.
Wow man, that sucks big time. Sorry for you trouble, hope it turns out better. These machines now a days seems like they are cheaper built, maybe it's just me. Good luck man, thanks for commenting.
Thank you. I plan to buy this Model next week, if still in stock. Need it for hauling with a trailer attached, plus next years mowing. Thanks again for your Great Review.
Thanks for watching! Hope you have as good of luck as I have had with it!
I own the same exact one they are nice but I think you can use Snow plowers for it and the other accessories for them.
had mine since around '06, mowed with it last week. I've not been easy on it, nor have I done regular maintenance. I have one tire that's the original after all these years. Replaced the deck belt at least once. Replaced the drive belts couple weeks ago. Now isn't a good time to be purchasing mowers. I hope it keeps going, I am treating it better now. When or if it dies, I have no reservations about getting another one, but I hope that day doesn't come anytime soon.
Thanks for the comment! I just had my first "problem" last fall before putting it away, the cable for engaging the blades broke! Now that I had all winter to forget how it comes apart I will try to put a new one in! Great comment, thanks for watching!
"The loose nut behind the wheel is orealorealore!" Lol
That's a technical mechanic term 😁
I've got a 2008 Pony I use to this day. Not one second problem. I agree maintenance is the key.
@@joseywales7930 I figure if I'm gonna spend this much money on equipment, I better take care of it!
I have the same on with a 19 hp Kohler engine. I bought mine newly used from a neighbor for $695. It’s been great I put gator blades on it a mulch plug. Once a year I change all the filters use synthetic oil and sharpen the blades. Another important thing I do is scrap the wet grass from the underside of the deck. And treat the areas that show oxidation with ospho rust inhibitor. And spray paint the areas under the deck. I use non ethanol gas and a fuel funnel that has a wire mush screen that traps all the dirt particles keep the fuel clean. I also blow grass off the deck and tractor after every use with a blow gun from my air compressor. All these things are the key to getting 10 plus years out of a lawn tractor
You nailed it brother! Preventative maintenance and no ethanol fuel for sure, Thanks for the comment!
I just use cheap gas and oil.
@jackwilliams5474 does she still run well? I'm looking to buy one soon
@@imrelentless9577 LOL, funny you asked. Not even 1 Year old, had some issue leaking oil so I'm going through their warranty process now
I bought my Pony from Lowe’s in 2011 for less than a grand. Have had no issues with it. Everything is still original except for the deck blade spindles and blades. Keep oil changed and clean air filters in it. I don’t wash mind all that much but will place a hose next to the deck at lowest setting and run blades to clean underside of deck. Never put the wash attachment on mine. Prior to this one my wife bought me an MTD lawn tractor from Lowe’s back in 93 after we got married. Had that till I got the Pony. Replaced the spindles on that one too and would have replaced the starter solenoid but the tranny went out before that. Engine was still in real good shape.
I bought an old model in about 2002 and I was always rough on it put about 200 hours on it without changing the oil and even ran it without oil for 3 or 4 hours. Bought a 2022 model and put it to the same work. Never have any issues with them
Thanks for watching and commenting!!
I just bought one yesterday. Hope to have the same positive expeirence you've had!
Take care of it and it should take care of you! Good luck, thanks for commenting!!!
This is how you should take care of your lawn equipment , well done
Thank you for the comment! I thought I was a bit quirky but I believe it helps the thing last longer!
@@captainprairie5790 that 100% right . Keeping your equipment well-maintained it will last a long time like with anything
Thanks for the review, is it powerful enough for tall grass? Thanks!
It's a strong runner! Thanks for the comment!
I mowed 4 or 5 feet of grass did have to mowed at the first setting so it won’t died then 2 setting did fantastic job. It’s been a great mower I love mine I prefer this over a John Deere or any expensive name. Brand I love mine
Mine is a tank. Owned it 4 years never changed the oil, pull attachments all the time, rough cut power lines etc
Nice to hear another success story, most comments are not so good. Now a days it's a gamble if you get a good one or a lemon it seems. Thanks for watching and the comment!
When the pto is engaged it starts to smoke white and stall in minutes but when not engaged it runs great I have no idea what’s wrong with it
Mine is doing this
I've been using 2011 with no problems. Mine has a 17.5 Briggs engine
I think the older ones are built better. I walked by a brand new one recently, the tires were cheesy. I didn't crack the hood to see what they are powered by now. Thanks for the comment!
@captainprairie5790 would u buy a used one for 500? It has Briggs and Stratton 17.5 hp and 7 speed transmission? Debating on this or the John deer la115.
Would u purchase this same mower with Briggs and Stratton. 7 speed transmission for 500
I have a 46 inch Troy-bilt lawn tractor. Only had it a week. The gas pedal is extremely had to depress.
@nancyweare8252 I have had a similar issue with mine but it seems to come and go. Sometimes when I want to go fast I have to pull the pedal back with my heel. Not been able to find a fix for it
You can put a plow on it I think.
Can you mow backwards also?
GREAT QUESTION!! Yes you can. There are 3 positions on the ignition. After turning the motor on the key goes back but if you put it in the middle position, there is a yellow triangle button to push that will let you mow backwards. Without that, the motor will turn off if you put it in reverse.
@@captainprairie5790 nice. Thanks.
do u like vylet pony :3
Can this go up hills good?
It sure can! I have never had a problem with it being under-powered.
I gotta say I got one 2 yrs ago and have had multiple issues..Alot of time down, several self and store repairs still tryin to get it goin...had to buy a push mower to cut in the mean time..customer service not real helpful, website makes dufficult or even impossible to talk to a human to rectify problems. Next time will definetly get another brand
I have read reviews on the customer service, or lack of. I'm starting to feel like I got one of them not built on a friday!
@@captainprairie5790 👍🏻..glad to hear that for you sir
I’m buying a 2020 for $550 is that a good deal with only 10 hours on it
That seems like a dadgum good deal to me!
I bought the same one 2020 2 days ago for $400 wasn’t starting all it needed was carburetor solenoid lol
@@russ8625 nicely done!
A awesome deal
I know someone with a shop and troy built models keep him busy 😂😂
Not an uncommon comment. My son has the model below the Pony, T30 or something like that, he doesn't do all the maintenance he should and it's still running. He doesn't have half the yard I mow either though. Thanks for the comment!
Steering mechanisms suck with it other then that it’s a pretty basic solid mower I bought one new from lows 9 years ago an only real problem is the play in the steering and it’s not the shaft it’s the drag link I also like it a lot more sense I unhooked the safety feature to allow me to back up while the blades are on makes it much better
Thanks for the comment! Fortunately I have not had the steering wear out on mine yet. The only issues I have had is the deck engagement cable broke right after I made this video and the blades need replacing.
@@captainprairie5790 Iv been though a few belts and blades I had to replace the transmission pulley an drive belt not long ago and I keep this mower in a shed, so it still looks pretty new for 9 years old the only other thing I hate is that this deck does not have scalping wheels also my deck Shute broke off so need a new one they run about 50 bucks lol
@@corywagner9733 troybilt must have upgraded since yours and mine, I have the wheels on the deck and a reverse safety override on the key switch. Sounds like you take care of yours! Storing them inside helps a ton!
hey man where is that safety switch I can't find it I want to unhook it cause turning the the deck off and on is bad for it
@@vicentee2687 On the key switch, there are two settings after starting it. If you turn the key back to the center position there should be a yellow triangle button to push, this will allow you to use the blades while in reverse. There is a light that will be on when this function is engaged.
Not really. I bought a Troy Bilt super Bronco 46xp about a month ago and the tire is warped.
Thank you for the comment! I hope you got that replaced. I am unfamiliar with the Bronco 46xp, how is the rest of the machine??
@@captainprairie5790 So far pretty good.
I've issues with going down hill with Troy built mowers anybody else?
This one is put neart 5 years old, I stopped by the Runnings where I bought it from. The new Ponys seem to have cheaper tires on them, didn't look too deep into the rest of them. Thanks for the comment
What year is your pony?Thanks!
2018. Still going strong
@@captainprairie5790 I just picked up a used one today 2018 really good shape for $700!
@@captainprairie5790 Mine does not have the wheels on the flap though?
@@michaelb4512 they come in handy!
Radio stations?
Cause everytime I change a battery on my vehicles I have to reset the presets. . . It just popped out there when I said it 😬
@@captainprairie5790 Um, OK? Maybe it was a joke or something that just went over my head but I still don't get it.
@@jackwilliams5474 not to worry, a lot of folks don't get my jokes! Thanks for watching and commenting!
@@captainprairie5790 Oh OK, LOL! I have an odd sense of humor too, and I was trying my best to get it but it just flew over my head LOL!
Just got one with 77 hours and belt is smoking on front
Well that ain't good man! I have had a stick get into the belt and throw it off the pulley before. You will prolly have to look for a bent pulley assembly or something like that. Hope it works out man
@@captainprairie5790 well I got in it CHEAP CHEAP.... only 77 hours. $800... so if they fix that or that pulley under the battery and tire it will be well worth it.. because my craftsman has +750 hours and now it won't start after I put $100 spindle and pulley on it
I bought one and into the second year the transmission went out, will not go in reverse. Bought a John Deere.
When they say nothing runs like a deere, they ain't kiddin! Wonder why R went out, that stinks man. Thanks for the comment though!
@@captainprairie5790 I looked on TH-cam and it looked like a common problem, it is fixable but I am to sick to work on it myself. I bought it from Lowes here in Tomball Texas and they had so many complaints they quite selling them.LOL.
@@williamwethington7905 Wow!!! How old was your mower, what year did you get it??? Hope mine ain't in that time frame, but I have used it purdy regular and demanding and no probs yet. Fingers crossed!!!
@@captainprairie5790 My aunt Stacey has a troy bilt TB 2246 Hydrostatic lawn tractor it does not look like this one
@@ToothlessThedragon9 that looks like it's gonna be the big brother to the Pony. If I read the specs right, the 2246 has a bigger V twin engine and a couple inches wider deck. Looks like a brute!
Tire are extremely thin and just grass will poke a hole in them 😢😢😢
Still no problems?
Still running good! I have replaced the spindles and the blade engagement cable but that's it!
Junk, only lasted 2 years, won't drag itself up a hill
Unfortunately i have heard that from a few folks. Glad I ain't one of them. If you get a good riding mower, let me know. Thanks for commenting and watching!
I would buy it if i had 2 grand
No kidding! The prices are going crazy up on these.
I signed up for the Runnings Credit Card (business) and I got $70 Gift Card for each "user" I added. Got enough Gift Cards to get this (plus a mower and BBQ grill) free!
Nah, I bought it but it's a pain to change the oil on.
I get by, there is always a mess no matter what mower you are changing oil on!
@@captainprairie5790 Well it's hard to reach because of the steering rod, I meant.
@@jackwilliams5474 gotcha!
I bought a new $3500 Troy Bilt riding mower. After 25 uses, the motor self-destructed. Turns out Troy Bilt is using Chinese-made engines. Taking it to their nearest "approved" warranty repair facility is 7-hours of driving.
Wow man, that sucks big time. Sorry for you trouble, hope it turns out better. These machines now a days seems like they are cheaper built, maybe it's just me. Good luck man, thanks for commenting.
Briggs and Stratton is chinese made?
Holy fuck, I just bought a brand new cub cadet 50 inch fab deck for $2800
meh
No thanks I put 200 bucks in parts and my very old Murray is like new and I sent the rest of the 2000 to President Trump😊😊😊❤❤❤
Them old mowers seem to keep on going! I had an old snapper from my grandpa that ran a long time and cut like a dream!