THERMALRIGHT FROZEN PRISM CPU Cooler Installation Guide for intel LGA1700, AMD AM4 AM5
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- For Frozen Prism 360 WHITE ARGB, Frozen Prism 240 WHITE ARGB, Frozen Prism 360 BLACK ARGB, Frozen Prism 240 BLACK ARGB, Frozen Prism 240 BLACK, Frozen Prism 360 BLACK.
08:06 I purchased the Thermalright Frozen Prism 240 black version, with 2 fans, the three-slot HUB-FAN is included. I wanted to know if it makes no difference to connect them on the 3 slots or do we have to respect the connections on this HUB (such as black-black or white-black slot)? The instruction manual contains no instructions regarding the fan connections on the HUB-FAN with only 2 fans. Thank you and greetings
im currenly trying to figure this same shit out too
It’s better to plug in the 2 fans into the hub, and the water pump directly into the motherboard (as in video). The reason is that your water pump will run at different speed than your fans.
If you plug the pump into the hub, it’ll run at the (usually slower) speed as the fans.
Nice ty. Lost my manual and couldn't figure out why the argb wouldn't work. But it's fixed now :)
Hopefully Thermalright make an AM5 offset mount for these coolers to position the waterblock over the CCX's
Hey why so much thermo paste??
Horrible instructions skipped part of the wiring
doesn't thermalright make HSF covers?
Where can I get those blue washers? mine came with none of those.
Why go with red standoffs?
My mobo only has one cpu header. Do I put the pump in that header, and the fan header in a regular 4pin header?
Yeah. Same issue. Either one works, just make sure it detects both in BIOS.
Create a new fans reserve black and white version .
Or create a stickers with thermalright image for put in back normal fans .
And is possible selling all stuff in amazon ????
Alot your stuff is Impossible found for buying.
Can thermalright be more active in social medias , active with reviewers and rework website with new infos etc
If you side mount you have to flip the fans right? Also my motherboard doesn't have a pump header would I connect the pump to the cpu_fan header? Or sys_fan
connect the pump to the cpu_fan header, sys_fan is ok but you have to adjust the bios later to make sure it runs at max speed
@@rupyproductions2506 that's what I heard and now that I've read it and heard it a couple times I'll do that instead of buying a new board because I really don't want to
@@rupyproductions2506 thanks for the tip but where do I now connect the fan hub header (the 4 pin)
Anyone know where i can get amother red AM4 standoff? Mine only came with 3!!!
I’m really skeptical on if I should buy this because I am very worried if it will break and then fry my whole 1k pc.
Does anybody know if this is well built and won’t break?
I have bought it recently and working just fine. In fact I think this is the best prodcut on the market, when it comes ration between price range and quality. Ofc there are better product which makes less noise or worse cheap products. As far as I can tell, design is very much same as the most other similar products and it has aRGB lights. More importantly its actually very well built. But the fan noise was not really loud, but still you can tell the difference from Corsair, Arctic fans. For me the noise was not really bothering, since I have also PC case with sound absorb. Really Really loved the product. It wont fry your system, cause it will automatically shutdown, if cooler does not work. After I installed the the cooler, it was also not starting or shutting down immedeatly. My problem was like showed in the video, I did not inserted the fan pins correctly. I had switched pins of Pump an CPU fan. Now its working perfectly. I would definetly reccomend it. Just best product! Affordable, well built, cool design. I would say just the materials of this thing would cost 50 bucks. but the whole thing for just 75 bucks? too good deal man.
I am also considering purchasing this cooler.
How does the pump sound compared to coolers from well-known manufacturers?
@@falera7266Pump sounds great. The first few minutes, you can hear a little bit of gurgling, but it soon ends. The fans are a teensy bit loud, but they can be adjusted in BIOS. It’s a STEAL.
@@bludzzhI agree tbh I haven't even heard the pump once during use
I bought the frozen prism 360 black a few months ago, it's cooling a 7800x3d, the fans are silent, I idle around 45c and get up to around 65c while gaming. this cooler is actually really good for $69, I was skeptical at first but figured if it fails i'll know because I use Core Temp to monitor cpu clock, temps, and usage. it's been going strong since the day I turned my pc on.
Watching this guy fumble with the screwdriver and thermal compound was pure torture
does the aio come with thermal paste?
Yes.
Toothpaste is included.
Had it for nearly 7 months now and works like a champ, 100% recommend it. ( Im running it with a Ryzen 7 7700x cpu)
awsome coolers this companys taking over
man o man so viel Wärmeleitpaste, das ist heftig, da läuft seitlich alles aus......
think you got enough paste there bud?
XD isn't it too much tho ?
@@-AK-- yeah it is
@@YungXanie just one dot on center is fine for this aio?
@@deheimer i bought this cooler and i just put a dot in the center works fine never go above 75c though my room is small and gets heat soaked fast
It work for the 7900x
Yes small man it does
@@renegade198 gay response tbh
@bakerman_on_kbm haha what's gay is your English spelling skills. But I found it cute.
For christ sakes, learn how to apply thermal paste correctly!