Hey man, I do speed runs with my tc too. You will find that if you run a more aerodynamic body it will not flip up like that, I run a mazda rx7 body on mine with a big front splitter and it never has any problems like that. The thing is a little rocket.
you don't need a gyro. just align the wheels properly and turn down the steering dual rate. I've put multiple car over 100mph and never used a gyroscope.
😅 reminds me of my yokomo Mr4tc lcg on 3s/9000kv... Also rediculous, crashed at 81mph... Also built about the same time🤦😂 I've fixed her now but as I'm sure you found out your diffs we're opening up and probably all sorts else going on
+KGTHREAT you could drop the suspenion and ad stops to the shock to stop the balls scraping the ground. also liimit steering at high speeds to be more gentl
Depends, If it has no weight in the front end and your all out for speed, its gonna be uncontrollable, even with throttle control. It even depends on the tires, or even the servo saver, if the words fastest RC can go that fast, I doubt that it would be controllable on dirty asphalt like this video. Get some experience before ranting about throttle control.
27 huh, not like I needed to know how old you are, Either why it sounds like you have no clue on how to control these RC cars, A real race car at 50mph hell lets say 150mph is far more able to be controlled at them speeds due to shear weight, regardless of air flow, yes it would help but with an RC car the weight usually isn't balanced like a real race car, having spoilers do help, but wont help it steer or stay in control but stay on the ground. Figured you would know this by now.
OK Lets see if I have enough "experience" as you call it..... I am 27 and have been racing r/c cars and tr4ucks since I was 6 HMMMM yea I think I know what the hell Im talking about. Look it up.. Videos of team associated building a car that is at 200. dirty ground or not it isnt hard to clean if you know how to push a broom. I have raced real cars and r/c cars and throttle control is sometime what wins a race if the surface isnt that great. Get some experience in doing research before you rant
![กินอาหาร ถูก vs แพง!! จานละ 500,000 vs จานละ 50!! [Ver. 2024]](http://i.ytimg.com/vi/FF_HppKg4vs/mqdefault.jpg)
HOUSTON, WE HAVE LIFT OFF
Its about aerodynamics,gearing, and traction.
This is why I use a Castle ESC. I can interface it with my PC and change throttle and brake curve.
I had the same problem with mine and I have added weight in the front above the bumper and helped me
looks like that thing wants some wings! it has enough take off! hehe nice car!
Man this thing is so overpowered, wich is good.
Motor: Castle creations CMS36-9000kv
Easy trick to keep the car stuck to the ground. Cut out the back of the car. Remove rear bumper the whole back of the car.
small bumps in the street are enough to launch rc cars at speed
Hey man, I do speed runs with my tc too. You will find that if you run a more aerodynamic body it will not flip up like that, I run a mazda rx7 body on mine with a big front splitter and it never has any problems like that. The thing is a little rocket.
I Love Castle Creations
Let Him Cry !
hilarious speed.
put 6 oz sticker car wheel weights on it to hold the front end down!
you should put a wheelie bar on it. lol
im getting the momba max speed control and momba pro motor for my traxxas slash 4x4. this shall be fun
for high speed you need gentle steering, a gyriscope and a more aerodynamic setup.
you don't need a gyro. just align the wheels properly and turn down the steering dual rate. I've put multiple car over 100mph and never used a gyroscope.
i agree but a gyro makes life much easier
There's something that's called "digital proportional controls", have you EVER heard of it?
holy crap!
What upgrades does the tc4 need for brushless! ? iv heard allot about the diggs melting?
😅 reminds me of my yokomo Mr4tc lcg on 3s/9000kv... Also rediculous, crashed at 81mph... Also built about the same time🤦😂
I've fixed her now but as I'm sure you found out your diffs we're opening up and probably all sorts else going on
Hey Ive got a tc4 I just put a fuze 6800kv system in it the motor and esc are getting a lil hotter than I'd like what grea do you this I could use???
i think i need to get 9000 now
On my TC4 my axle broke too, just like yours...
that things quick. what size pinion and spur did you use?
what upgrades do you need for brushless ?
Do you know how much amperage the motor is pulling on 3s?
dat backflip though haha lol!!!
Change the body that is like a brick in the wind and will lift off after 50-60.
What was the other car in the video ?
ctu racing... more like ctu breaking!
hi
I know the characteristics of lipo and pinion are you using?
thanks
lmao that's insane
Having so fast a car and not being able to drive...
yh what is that little rc car and who makes it?
Whats your gearing on the car
hello
but the mamba 9000kv is not just to 2s?
to 3s are not likely to burn?
needs a new body that creates more downforce
whats up with the police sirens in the background?
Imagine 3C on a tekin 2.5T 11.450 KV! :)
to much down force to the rear you should try cutting the wing about 1mm or just lowering the rear of the body. cheers
Title.
@lxCTUxlKOOL buy a traxxes rustler and put the motor in the rustler then you would have control
how much is that rc car?
hello
how come you have not chosen the 5700 ?
u need aero-dynamics
the sound of scraping lexan is so horrible.....
throttle control????
3s lipo get metal or steel gears no brass no aluminum upgrade your diffs
esc???
im a noob but what if you had a heavier front end i know they sell weights just for that
+KGTHREAT you could drop the suspenion and ad stops to the shock to stop the balls scraping the ground. also liimit steering at high speeds to be more gentl
Get rid of the wing it will run better
need some downforce!
take that body off and put that 1/10 scale lola body up there. thats what i have on mine n i have the same setup. n i neva blow over
Look man, ease into throttle, tune your setup.....
Haha not enough down force. Get yourself a front spoiler like the f1 cars
needs some weights!
shouldnt run 3s on the 9000kv, i broke the esc that way.
Depends, If it has no weight in the front end and your all out for speed, its gonna be uncontrollable, even with throttle control. It even depends on the tires, or even the servo saver, if the words fastest RC can go that fast, I doubt that it would be controllable on dirty asphalt like this video. Get some experience before ranting about throttle control.
Why is it uncontrolable? If the worlds fastest rc car goes 200 then u should be able to drive his at 50. Its called throttle control. :)
dude,put weight in front..then you can actually fly
the worlds fastest rc car dosent go 200mph
27 huh, not like I needed to know how old you are, Either why it sounds like you have no clue on how to control these RC cars, A real race car at 50mph hell lets say 150mph is far more able to be controlled at them speeds due to shear weight, regardless of air flow, yes it would help but with an RC car the weight usually isn't balanced like a real race car, having spoilers do help, but wont help it steer or stay in control but stay on the ground. Figured you would know this by now.
OK Lets see if I have enough "experience" as you call it..... I am 27 and have been racing r/c cars and tr4ucks since I was 6 HMMMM yea I think I know what the hell Im talking about. Look it up.. Videos of team associated building a car that is at 200. dirty ground or not it isnt hard to clean if you know how to push a broom. I have raced real cars and r/c cars and throttle control is sometime what wins a race if the surface isnt that great. Get some experience in doing research before you rant
i think i need to get 9000 now