Hi, would it be possible to code in a new TMS sensor for the headlights on the F10 2012, with this? Common problem is condensation inside causing errors. Need to replace the TMS sensor or possibly the whole unit, will this allow me to code the replacement parts? Thanks again, nice video!
My car only has a language option for German and Dutch can I use this to reprogram the I drive software to a newer updated version as mine is somehow unprogrammed and doesn't have any other language options (bimmercode)
@kavindu imesh- I would recommend to put car on trickle charge or run the car to ensure battery doesn’t die. If you are going to run the car, then start it and then plug and connect the device.
Hi good night do you know how to code in the flashing brake force light on a f10? I code in the first four in the footwell module there is supposed to be a fifth option in another module but I cannot find it.
How to use full screen on f10/f11? Can see your screen on car is full screen while mine is splitted, left side is menu, right one I suppose would be camera in case I have it, want mine to be full screen as well
@Andrew Bates - first of all congrats on the m5.. enjoy the car. When you hook up bimmercode code do you have bdc or fem modules, do you see mirror section if so enable them and you have to have power folding mirrors. Or do you mean mirror tilt on passenger side?
@@SheziMotorsport interestingly enough, I just found out, while reading bimmer blogs, that I have to hold the center button to lock the doors and get the rearview mirrors to tilt up. Now regarding the passenger mirror tilting down when I put the car in reverse… How does the car no to do that or what if I want the driver side window to tilt down?
@andrew bates - the mirror switch have to be on the driver side position and than passenger side mirror will tilt when car in reverse. I believe with coding you can make it tilt like 87° or something and you can also make them dark so at night so car behind you doesn't bother with it's headlights.
@nicolas Zaroyan - technical answer is yes but dealer has to prove it that coding cause an issue. Whenever you code follow best practices so those issues don't arise or nothing is broken.
I have a 2012 f 10 bmw 520d and mirror folding is not working is there any prerequisite for this feature to work should the car must come with this option by default
I replaced my head unit because the old one went out. When I plug the app in I do not have a selection for a head unit available is there something I am missing?
@kevin Cole - I would not suggest the dealer route. I would imagine the new head unit has to be registered to th car or some to get it enabled.. have u looked into that coding?
will this code a battery? I can use rheingold to register the battery but if the new battery is a different type or Ah rating then it needs to be coded, will this app do that?
I have a 528i 2011 DRL checkbox is not coming up on the idrive screen as an option to on/of. Will I be able to add it via bimmercode? Appreciate you work Man.
@@SheziMotorsport I coded 3000ENT_MC_WLAN_STREAM_DMP_COVERARTset to: aktiv 3000ENT_MC_WLAN_STREAM_DMP_VIDEOset to: aktiv 3003WLAN_STATUSset to: aktiv 3003WLAN_MODUSset to: ap 3003WLAN_SIGNAL_STRENGTHset to: outdoor 3003WLAN_CHANNELset to: channel_14 so I can see the wifi option in connection now but I cannot check the box to activate wifi could you help?? am I missing something in the settings?
Hows things i have a plastic flap covering my f10 obd port so my vgate doesnt push in all the way will i just remove the cover? hope to hear back soon cheers man
@@khaynes185 it should push in, see if you can remove the trim and install vgate.. surprising bc obd ports are never blocked. And yours is in foot rest pedal on driver side? What type of a car?
@korey Price - if you are on iOS yes you need both, for Google Android you only need bimmercode as bimmerlink doesn't exist. So if u are on iOS get both apps. Bimmerlink app will help clear any errors.
You dont need to buy both apps, buy just BimmerCode. I had problem with ios13 on iphone x, i got that Connecting Error with V Gate Wifi Obd. Then i tried with iphone 7 and ios 12.3.1 and works fine. Once you bought BimmerCode app, just login in App store with your account in other phones with ios 12 and download it. You also need to Renew your license to full version in Settings. Works fine. Iphone 7, ios 12.3.1 - Bmw F10 525d xDrive 2012. Cheers
hey good afternoon i have a question for 2013 bmw 535i i did some search on google and found that there is an expert mode for phone mirroring do you know what are the codes for f10 to bimmercode expert mode to have the screen mirror to the iphone or android thank you in advance
@arsen varden - with factory settings it's not possible bc you are missing the wifi cable or antenna that it will require. Or did you already install the wifi cable behind your headunit.
@arsen varden - I could be wrong but iPhone doesn't support screen mirroring like Android. Let me look in expert mode to see what codes are there bc with esys yes you can enable once the wifi cable had been installed which is used as screen mirroring..
@@SheziMotorsport hey thanks for your reply, i do not have the wifi cable or the antena but since the car is fully loaded with navigation and originally didnt have the pedal shifters on the steering wheel but i replaced with new one and after doing the bimmercode AKTIVEvPedal shifters it worked didnt require any wiring so im hopping maybe just coding might make itwork and if not after trying the coding i will look into cable or antena install so if you could get the codes expert mode even for Android device only will appreciate your help
Pedal shifters definitely need to be coded otherwise it won't work. But WiFi cable will need to be coded by esys module. I haven't seen the code in bimmercode for that.
@@SheziMotorsport yes the pedal shifters worked with coding didnt need to additional wiring since the car is fully loaded packege and thats why i think if i can get the codes for phone mirroring might work without wifi cable because it migt just be in the stock navigation unit so if you could get the expert mode codes i will try and let you know if works and if coding dnt make changes than i will do the wifi also one more question how can i install apple tv what do i need for apple tv to work in the car with original navigation screen V
Hi, i tried to code few things today and for example my lights are brighter bud my mirrors are still not folding after locking and auto stop is still turned on after i start up the car, do you know whst can be the reason? Also can this messed up my traction controls cause noticed worning while codin, thanks.
@branko knezevic - what year is ur car, I believe in 2014 is where BMW software was updated so auto start on/off would stick.. go to bimmercode app --> fem ( front electronic module) --> auto start has 3 settings make sure u assign those values properly. In same location scroll down there should be "Mirrors* set the values for convenient opening for mirror folding and unfolding. Try that and hope that's it.
@@SheziMotorsport hi, thank you for the answer, i will try that. Also i tried to put digital speed on my cluster but i lost hour and km, do you know how can i get this back?
Digital speed should only appear when u cycle through BC on the left stock. Go into ur iDrive and than go into settings and see for information display if all the settings are checked.
Hi , I have BMW F10 520D 2001, is it possible download Navigation? I found MAP CD download but please let me know hot to install if is possible thanks.
@chris Bailey X5 is F15 if it's 2014 and above. Yes it will work with 2015 F15 as I have done it on 2015 as well. Here is the video for F15 - th-cam.com/video/3mUsGMNpGvQ/w-d-xo.html
Shezi Motorsport I have a 2012 F1.06 model. I checked the bimmercode website and it’s states that’s compatible. I have purchased the equipment from amazon so will wait until it’s delivered before buying the app version on Android.
@ Mark Mazur - thank you for bringing it to my attention. I just checked out their website as well. Seems like Obdlink are three new ones. I just tested my vgate2 WiFi and I can connect to my car and get into coding options. What I don't know if the app developer will stop just supporting old ones or will they stop working as well overtime.
@ Ron Miller - you won't be able to code it with bimmercode,I'm sure you will need to enet cable & esys software or should be able to do it with ista+.
@asimKR - only if your car is 2014+ I believe. If you go into front electronic module --> Auto start stop function switch - off, make sure that is set to active.
So i did exactly the same thing with my 2016 f10 and on the app it says it is successful but when i use the car the code is not implemented are working on the car. What should i do
@@danemiller1282 do u have power folding mirrors? Make sure you select the first value and ensure remainder 4 vales are active otherwise you will have to set those to active as well
I have a 530I 06 BMW my brake switch went out I replaced it and it still won't go out of gear my transmission is Saint transmission faulty to Drive Moline is there anybody out there then tell me the code to get that transmission signal to go out of park and Kansas City
For Android it cost around $35 and there is only one app to buy bimmercode. For Apple iOS there are two, bimmercode which I believe is $26 and bimmerlink which is around $26. Once you buy the pro all functions are unlocked for coding. There is no extra charge per function.
@ryan FIshesalot - you can get it on Amazon. I would not get vgate, get veepak or if you want to avoid Amazon than look at app developer page, he has some links. I think ECS tubing also sells them.
@@ryanfishesalot6311 I had vgate, I have noticed some inconsistency and connection issues. I would not want connection dropping during the code process. App developer also doesn't have it listed as supported device anymore. There are newer devices and I believe veepak is the cheapest option.
@ryan FIshesalot - are you saying auto ac setting or how it remember the last ac setting when car is turned off? And than when restarted it remember that settings.
@zain Ali - what do you mean? Are you saying you have different options over you load up bimmercode app. That's possible as every car comes loaded with different options.
@ron Miller - you don't need to code those, if they are oem tpms they will Auto readjust. Have you tried to reset tpms from iDrive? Maybe u can use bimmerlink if you are using iOS.
Excellent beginners guide, this has helped me a lot. so well explained, Thank you
Hi, would it be possible to code in a new TMS sensor for the headlights on the F10 2012, with this? Common problem is condensation inside causing errors. Need to replace the TMS sensor or possibly the whole unit, will this allow me to code the replacement parts?
Thanks again, nice video!
@ammir Hussain - u will need esys or ista for that bimmercode won't be able to.
Thank you, appreciate it.
Does the app have screen mirroring to connect your iPhone?
@Ant B - not that I can recall. New idrive have that screen mirror built in
Great video. Can I activate the turn signals in HUD even tho i have the full digital cluster?
Thank you
@raul barsan- yes you can, as along as your digital cluster supports HUD, you did be able to cover the turn signals
@@SheziMotorsport Thanks bro!
@raul barsan - you are welcome!!
don't think signal in HUD is supported in the newer 6wb cluster
Nice video. Just did to my 2016 M5 and gotten the service (red triangle) light after coding. Do you know how to reset this light? Thanks!
Jason j lee- thank u. You can reset the light via bimmerlink or instrument cluster.
th-cam.com/video/-ftgCmKP_aI/w-d-xo.html
Will bimmercode unlock the rear emergency brakes?
@bayareaartist999 - bummerlink you can put the car in service mode or rear e brake in service mode...
@@SheziMotorsport how?
Good video explaining
My car only has a language option for German and Dutch can I use this to reprogram the I drive software to a newer updated version as mine is somehow unprogrammed and doesn't have any other language options (bimmercode)
@B wise - I believe your would need to use esys for the reprogram and add languages.
Should we start the vehicle after connect the adapter or can do while vehicle ignition ?
@kavindu imesh- I would recommend to put car on trickle charge or run the car to ensure battery doesn’t die. If you are going to run the car, then start it and then plug and connect the device.
Hi good night do you know how to code in the flashing brake force light on a f10? I code in the first four in the footwell module there is supposed to be a fifth option in another module but I cannot find it.
Is it necessary to upgrade to the pro version or can these operations be done in the normal version ? (bimmercode)
@ozkan caliskan - yes you need pro.. Otherwise you can't code
How to use full screen on f10/f11? Can see your screen on car is full screen while mine is splitted, left side is menu, right one I suppose would be camera in case I have it, want mine to be full screen as well
Man!!! I just bought a 2015 M5 and
I can’t get the folding rear view mirrors to work
Any tips??
@Andrew Bates - first of all congrats on the m5.. enjoy the car. When you hook up bimmercode code do you have bdc or fem modules, do you see mirror section if so enable them and you have to have power folding mirrors. Or do you mean mirror tilt on passenger side?
@@SheziMotorsport interestingly enough, I just found out, while reading bimmer blogs, that I have to hold the center button to lock the doors and get the rearview mirrors to tilt up.
Now regarding the passenger mirror tilting down when I put the car in reverse… How does the car no to do that or what if I want the driver side window to tilt down?
@andrew bates - the mirror switch have to be on the driver side position and than passenger side mirror will tilt when car in reverse. I believe with coding you can make it tilt like 87° or something and you can also make them dark so at night so car behind you doesn't bother with it's headlights.
Does this void warranty? Or will this prevent BMW Dealer to not service my car??? Thanks!
@nicolas Zaroyan - technical answer is yes but dealer has to prove it that coding cause an issue. Whenever you code follow best practices so those issues don't arise or nothing is broken.
This is hands down the best channel on all of TH-cam!
Can I delete the TPMS light on a 2016 528i? I have aftermarket wheels.
If I code with just bimmercode for video playing can I use my iPhone connected to the USB to play videos ??
Very good question, no it will not work via phone
I have a 2012 f 10 bmw 520d and mirror folding is not working is there any prerequisite for this feature to work should the car must come with this option by default
@pranesh R - do you power mirror? meaning can u fold them via button on driver door?
Will that work on the 2015 535IGT?
@mr jir jirk - yes
I replaced my head unit because the old one went out. When I plug the app in I do not have a selection for a head unit available is there something I am missing?
@kevin Cole is the new unit registered?
@@SheziMotorsport I’m not sure. I’ve order two used ones off eBay the second one was broken.
Should I just order it from the dealer,
@kevin Cole - I would not suggest the dealer route. I would imagine the new head unit has to be registered to th car or some to get it enabled.. have u looked into that coding?
will this code a battery? I can use rheingold to register the battery but if the new battery is a different type or Ah rating then it needs to be coded, will this app do that?
I have not seen bimmercode app to have this option yet.
you can do with this app, the mirrors close in an f10? with remote control?
@ Edgar Ruiz - if u have power folding mirrors than u can do it w.o a problem
Cool !!! Thanks
also trunk you can open close with the key after coding on all f series
Hello. Do you know if a DVD in motion can be activated on a CIC navi professional, on my BMW f10 2012?
Yes it can be..
Thanks. Fast answer. ;)
Best app ever
I have a 528i 2011 DRL checkbox is not coming up on the idrive screen as an option to on/of. Will I be able to add it via bimmercode? Appreciate you work Man.
do you know how to activate screen mirroring?
@teknodogg - can you go into heqdunit and than scroll down on the bimmercode app?
@@SheziMotorsport 2015 F10 don't have the mirrioring function in head unit... Will need to know how to advance code it in bimmercode
@tknodogg - what option do u see in headunit?
@@SheziMotorsport I coded
3000ENT_MC_WLAN_STREAM_DMP_COVERARTset to: aktiv
3000ENT_MC_WLAN_STREAM_DMP_VIDEOset to: aktiv
3003WLAN_STATUSset to: aktiv
3003WLAN_MODUSset to: ap
3003WLAN_SIGNAL_STRENGTHset to: outdoor
3003WLAN_CHANNELset to: channel_14
so I can see the wifi option in connection now but I cannot check the box to activate wifi
could you help?? am I missing something in the settings?
@@SheziMotorsport does 2015 F10 535i even have wifi antenna? if not if I add one would I be able to miracast??
Great video
@C E thank you
Hows things i have a plastic flap covering my f10 obd port so my vgate doesnt push in all the way will i just remove the cover? hope to hear back soon cheers man
@ k haynes - you should be able to just remove it push the plastic covering out the way.
@@SheziMotorsport ive done that it slots in but doesnt push in far enough because of the piece of plastic
@@khaynes185 it should push in, see if you can remove the trim and install vgate.. surprising bc obd ports are never blocked. And yours is in foot rest pedal on driver side? What type of a car?
@@SheziMotorsport mines a 2010 5series f10 ive a trim removal tool and it still wont come off
@@SheziMotorsport and yes its in foot rest drivers side
Just to be clear, I have to buy BimmerCode AND BimmerLink?
@korey Price - if you are on iOS yes you need both, for Google Android you only need bimmercode as bimmerlink doesn't exist. So if u are on iOS get both apps. Bimmerlink app will help clear any errors.
You dont need to buy both apps, buy just BimmerCode. I had problem with ios13 on iphone x, i got that Connecting Error with V Gate Wifi Obd. Then i tried with iphone 7 and ios 12.3.1 and works fine. Once you bought BimmerCode app, just login in App store with your account in other phones with ios 12 and download it. You also need to Renew your license to full version in Settings. Works fine.
Iphone 7, ios 12.3.1 - Bmw F10 525d xDrive 2012. Cheers
I don't see what you see in bimmercode conected with enet cable with the phone to car.Should I buy another obd2 adaptor?
@alex razvan - what are you trying to do? If you are doing bimmercode I would use adapter and not enet cable.. I use ennet for fsc or esys.
@@SheziMotorsport they are not the same? You don't have the same result or better with enet cable?
@@SheziMotorsport i'm trying to change the startup display on a F10 2010 with CIC display.but i heard that is not posible with bimmercode on Cic
@@AlexTheGreatX like add the m start splash screen ? What options do you see in either headunit or bdc module?
hey good afternoon i have a question for 2013 bmw 535i i did some search on google and found that there is an expert mode for phone mirroring do you know what are the codes for f10 to bimmercode expert mode to have the screen mirror to the iphone or android thank you in advance
@arsen varden - with factory settings it's not possible bc you are missing the wifi cable or antenna that it will require. Or did you already install the wifi cable behind your headunit.
@arsen varden - I could be wrong but iPhone doesn't support screen mirroring like Android. Let me look in expert mode to see what codes are there bc with esys yes you can enable once the wifi cable had been installed which is used as screen mirroring..
@@SheziMotorsport hey thanks for your reply, i do not have the wifi cable or the antena but since the car is fully loaded with navigation and originally didnt have the pedal shifters on the steering wheel but i replaced with new one and after doing the bimmercode AKTIVEvPedal shifters it worked didnt require any wiring so im hopping maybe just coding might make itwork and if not after trying the coding i will look into cable or antena install so if you could get the codes expert mode even for Android device only will appreciate your help
Pedal shifters definitely need to be coded otherwise it won't work. But WiFi cable will need to be coded by esys module. I haven't seen the code in bimmercode for that.
@@SheziMotorsport yes the pedal shifters worked with coding didnt need to additional wiring since the car is fully loaded packege and thats why i think if i can get the codes for phone mirroring might work without wifi cable because it migt just be in the stock navigation unit so if you could get the expert mode codes i will try and let you know if works and if coding dnt make changes than i will do the wifi also one more question how can i install apple tv what do i need for apple tv to work in the car with original navigation screen
V
can u make a EDC Delete on this app?
@dastas85 no you can't .
Do you buy this 1 time or do you have to keep renewing it?
One time
Hi, i tried to code few things today and for example my lights are brighter bud my mirrors are still not folding after locking and auto stop is still turned on after i start up the car, do you know whst can be the reason? Also can this messed up my traction controls cause noticed worning while codin, thanks.
@branko knezevic - what year is ur car, I believe in 2014 is where BMW software was updated so auto start on/off would stick.. go to bimmercode app --> fem ( front electronic module) --> auto start has 3 settings make sure u assign those values properly. In same location scroll down there should be "Mirrors* set the values for convenient opening for mirror folding and unfolding.
Try that and hope that's it.
@@SheziMotorsport hi, thank you for the answer, i will try that. Also i tried to put digital speed on my cluster but i lost hour and km, do you know how can i get this back?
Digital speed should only appear when u cycle through BC on the left stock. Go into ur iDrive and than go into settings and see for information display if all the settings are checked.
Hi , I have BMW F10 520D 2001, is it possible download Navigation? I found MAP CD download but please let me know hot to install if is possible thanks.
No sorry you would need cd for that
What about 2015 X5 do it work for it / also what is the chassis X5 coding
@chris Bailey X5 is F15 if it's 2014 and above. Yes it will work with 2015 F15 as I have done it on 2015 as well.
Here is the video for F15 - th-cam.com/video/3mUsGMNpGvQ/w-d-xo.html
Thank you, much respect
@@cookingwiththebaileys1720 - hope the other video helps.
How do change the Nobie time lighting on a 2015 535 i ?
What is nobie?
can i do EPB and headlight washer with it?
Headlight washer u can? Epb electric parking brake? What are you trying to do with that,
Hi, would this work on my BMW 520?
@kofi Owusu-Allen - if it's f series than yes depending on what options are available for your particular car..
Shezi Motorsport I have a 2012 F1.06 model. I checked the bimmercode website and it’s states that’s compatible. I have purchased the equipment from amazon so will wait until it’s delivered before buying the app version on Android.
Sorry meant to say 2012 F10 model
@@kofiowusu-allen9916 than it should work with the dongle and full app..
Shezi Motorsport cool. If I get any issues i will drop you a msg as your video is extremely informative and simple. Thanks
Can it support with BMW E60 5series year 2004 ??
No it won't work with E60. Sorry
No one had explain that you have to buy the full version of this app to using it .. 🤦🏽♂️
he said in the video you BUY the bimmercode app lol
@teknodogg - thanks
Bmw f10 523i can?
Can i delete the bonnet open sensor in my cluster with this app ?
No you can't do that with the app.
How many more videos of the same subject we need on you tube.
VGate iCar is no longer listed on bimmercode supported devices? Know anything about that?
@ Mark Mazur - thank you for bringing it to my attention. I just checked out their website as well. Seems like Obdlink are three new ones. I just tested my vgate2 WiFi and I can connect to my car and get into coding options.
What I don't know if the app developer will stop just supporting old ones or will they stop working as well overtime.
@ Mark Mazur if they send me new obdlink I'll do a tutorial.
Can code F10 if I upgrade headlight pre LCI to LCI ?
Believe esys will do that.
hello
bmw f10 head unit on bimmercode app Error
what is the problem?
@race turk- what's the error? What device are you using to connect to the car? Have you bought the full version?
I bought the BeemerCode app... I have to buy the BeemerLink also?
@Raulio - if you are using iOS than yes. If you are using Google/Android than just bimmercode app..
kingshezi Why is that?
Yo, can’t do it, my phone can’t find the device
@@rauliod23 that's how the developer made the app for iOS.. bimmerlink app clears any faulty codes you might get
@@rauliod23 are you using vgate wifi or Bluetooth? If you installed any app other than bimmercode for vgate for coding just delete and try again
Can you read bmw specific codes with this App?
With bimmerlink for iOS you should be able to. With Android app you can't.
kingshezi great thanks
Sorry but it’s not the sensors in the wheels it’s the actual antenna mounted behind the bumper and it does need coded.
@ Ron Miller - you won't be able to code it with bimmercode,I'm sure you will need to enet cable & esys software or should be able to do it with ista+.
can i code the new headlights with this to the car?
Mr Yxz Depends on what do you want to do with headlights on what car. But yes you can, there is Headlights and Backlights option for coding.
Could this work on my 2008 528i?
You can try but I don't believe it will work for E.
2014 up only
Does it turn off the auto start/stop?
@asimKR - only if your car is 2014+ I believe. If you go into front electronic module --> Auto start stop function switch - off, make sure that is set to active.
So i did exactly the same thing with my 2016 f10 and on the app it says it is successful but when i use the car the code is not implemented are working on the car. What should i do
@dane miller - did you code multiple things at once or did one module at a time.. try again and code one at a time.
@@SheziMotorsport i did 1 at a time but ill tru again
@@danemiller1282 - any chance ur battery died or did soft reset? What were you coding or what features?
@@SheziMotorsport no my battery didn't die i did all the step but it would take it... i was trying to code the mirrors
@@danemiller1282 do u have power folding mirrors? Make sure you select the first value and ensure remainder 4 vales are active otherwise you will have to set those to active as well
I have a 530I 06 BMW my brake switch went out I replaced it and it still won't go out of gear my transmission is Saint transmission faulty to Drive Moline is there anybody out there then tell me the code to get that transmission signal to go out of park and Kansas City
which adaptre to buy
You can get older one such as vgate wifi, but here is the lost from the developer website. www.bimmercode.app/adapters/
Will this void my warranty?
@paraunasahb - legal disclaimer is yes. Code at your own liability. I haven't run into an issues and I still have my warranty intact.
What is the warning message showing in this APP?
@xiaomu7401 - are you referring to at start up or at time of coding, if so that is just normal fine print saying things to be careful with..
It’s showing that need to buy full version of BimmerCode when I start to coding.
Is there a price list for the app or for the functions? I looked at the website and there's no information on pricing.
For Android it cost around $35 and there is only one app to buy bimmercode. For Apple iOS there are two, bimmercode which I believe is $26 and bimmerlink which is around $26. Once you buy the pro all functions are unlocked for coding. There is no extra charge per function.
@@SheziMotorsport Thank you.
@@jetmobile - you are welcome..hope that helps
Will this work on my 2016 528i
Yes it will. This can done on F10… 2011-2016 5 series. And other newer models. All the coding options depends on the car you have.
Where do i get the chip to be able to connect
@ryan FIshesalot - you can get it on Amazon. I would not get vgate, get veepak or if you want to avoid Amazon than look at app developer page, he has some links. I think ECS tubing also sells them.
@@SheziMotorsport may i ask why brothuh
@@ryanfishesalot6311 I had vgate, I have noticed some inconsistency and connection issues. I would not want connection dropping during the code process. App developer also doesn't have it listed as supported device anymore. There are newer devices and I believe veepak is the cheapest option.
@@SheziMotorsport thank you bro. I just dnt like the auto ac n shit. I wanna c what else i can do.
@ryan FIshesalot - are you saying auto ac setting or how it remember the last ac setting when car is turned off? And than when restarted it remember that settings.
It doesnt work on a 535i f10 from 2010 ???
It should work on any f10 starting 2011.
the app is designed for bmw cars 2010 and up all f series cars also e series 2010 and up it shows in the app as well
I didnt get all of those options
@zain Ali - what do you mean? Are you saying you have different options over you load up bimmercode app. That's possible as every car comes loaded with different options.
How can I contact you I have no social media do you have email
My TPMS is not working and I bought a new RDC antenna. I am being told it needs coded to my 2011 F10. Can I code it with this?
@ron Miller - you don't need to code those, if they are oem tpms they will Auto readjust. Have you tried to reset tpms from iDrive? Maybe u can use bimmerlink if you are using iOS.
Can this work on my 2013 Bmw 528i?
@papa Singh which particular feature or just in general?
@papa Singh - it will video was made on 2015, depending on what's available for ur car, you can code it