@@faizabbes889 did u not watch the video from the start he made the plans on his computer u need to wake up ur a sleep he sales them for $70 on his web site
@@doesntmatter3068 it depends on the way you see skill, dont come say me you know better about making anything, when you clearly dont seem to know anything about 3d modeling and making it a reality.
Boat building tip: to avoid deformation, build up a hull piece by piece symetrically - not one half first, then the other half. It prevents potential warping to one side, and will also make things more even if you want to do seam corrections simply because they are fresh in your memory as you go.
aliphatic glue would be better glue for the paper to wood, for a 22yo your doing some clever things unlike others on youtube, your building to a set of plans, I'm impressed by your engineering, keep it up Jornt you'll go far lad😎👌
totally agree with you. i build model planes and love the aliphatic glues too. This is a very neat clean build. I'll be following your channel from now on.
The worst part about finding this video is that when I saw part 1 I got excited then saw it was posted on May 15. Well, I'm bummed I can't binge-watch this but I'll def be here for the rest of the project!! Good luck!
Wat een vet project man, en respect dat je al het werk allemaal zelf blijft doen! Lang niet iedereen heeft de luxe om een CNC te gebruiken, maar een decoupeerzaag hebben de meesten wel. Top werk, ik kijk uit naar het volgende deel!
Vet he! Kleine note: bij de meeste Makerspaces is meestal tegen een kleine vergoeding een lasersnijder te gebruiken, dus dan is in 2d snijden voor de meeste wel een optie! Maar een build met gereedschap wat iedereen al heeft is altijd fijn.
You're Magical Young Man. Materializing things of your ideas right from combination of your Brain views, intelligence and mindset is very rare amongst common men. You're worth millions and millions. Without any doubt Someday you're going to be a CEO of your own foundation company industry. You're going to be designing building and materializing many more bigger and biggest usable things for people of world over. 👌👍✌️❤️🌹🤗 I'm learning more from your videos about your own homemade automotive utility things. Your video presentation of exiquting your automotive ideas into reality is excellent. Added along with your super best workmanship. ❤👌👍✌️😊
a few issues. 1 you should apply the resin before laying down a fibreglass layer. helps stick and prevents bubbles and warping. 2 You wore a respirator when applying the fibreglass but not even a mask when sanding it. That's how you die. Sanding Fibreglass is the most dangerous part
yea was good up to the fiberglass part, it's a must to apply resign first let dry apply a 2nd coat let dry, sand then apply a bottom coat then add the mat and glass top, people forget that the wood sucks up almost 75% of the resign meaning it will fail rather quickly.
volevo farti i miei complimenti veramente un bel progetto volevo solo chiederti se lo scafo lo hai progettato tu o hai comprato il progetto su qualche sito on line
My thoughts as well. I would have made the frame an exoskeleton and skinned the inside to make a mold and flipped a hull out of that all in fiberglass and composite
@@holmes1956O Yes, some pinholes covered over with mold release and plumbed to a compressed air supply would pop out real nice fiberglass (carbon fiber) and foam hull sections nicely using vacuum forming. By the way what happened to part 2 of this build?
Not to take away from the excellent build but if you would have used the same panels you could have eliminated the frame all together using the “stitch and glue method”. It is the same process except no frame and it is almost as strong while being much quicker to build along with approximately a 50% weight reduction!
That's a sweet little boat, nice work! That hull should be almost indestructible, given the thick plywood you used. Should be just about right for a jet-ski! 👍
Great video and great designing, way better than I could ever attempt. I am currently building a stitch and glue sailing dinghy and I have a few suggestions: I am not sold on the PU glue that you used. Epoxy resin with wood flour or an additive like cel-o-fil that is designed for structural bonding and filleting would be a better choice. Also, try your hand at designing a stitch and glue hull. Instead of a frame with planks attached, bulkheads are used to add rigidity and water tight compartments for floatation. I think you could do it and would simplify the build process for any future designs.
Any plans of filling the hull with foam? A couple of large blocks in the bow would prevent complete loss in the event of a catastrophic accident. Copying the inner design of the Yamaha this is modeled after would keep it afloat in a hurricane.
@@homemade_madness Als je dit gaat doen dan even de 2 componenten van polyservice bestellen. Het purschuim uit de bouwmarkt neemt namelijk water op en dat zou zonde wezen van deze mooie creatie.
Great skills bro! I'd like to make an electric version for my channel. You said 3 people could fit on it, would it be possible to scale it down slightly or is the scaling joined with the design? I would 3D print the jet drive and impeller. Think it would work? 😅
Thanks man, been watching your channel for years😅 I think it could be done, best thing is to just scale the big papers, and scale them down by 15/18 (0.833) Then you can use 15 mm thick plywood for the framing (instead of 18) and all the notches will still fit perfectly😁 also a 3d printed jet drive is possible, check out DK the welder, he has some cool small jetdrive builds. Goodluck👊🏻
Wow, this is really a wonderful video content Sir , since I was a kid I was obsessed with boats until now I'm still into dreaming of building one but I can't afford to do it since I don't have much , and then there comes your step by step video of how to create it , and then it gives me an inspiration to maybe try to build it bit by bit , and follow your drawings, instructions,dimensions and as well as your dedication to get it done . I just hope I can have your full or complete boat plan on my working table for in one way or another it could me help build my dreams. God bless you Sir, stay safe and healthy to keep you doing what you do, and inspiring us . It is an honor for me if one of these days you can share me your ideas on my first project. Thanks.
Great job on those plains, if some one told be they are going to do what you are doing I would think "never going to happen" but I some how think that you can indeed do it...
That probably took forever to dry depending on the temp of where your at. Glad to see you are still leading the game on project/builds of DO-ABLE fun projects. Your videos are prime for helping people that want to make something. Keep at it
Have you ever thought about selling all the wood parts cut to size already and mail the plans from pcs's cut on to finished product I would be interested in that...
When I was a kid in the early 80s my neighbor made some kayaks using the same skeleton frame design and then covered them with a canvas and waterproof paint.
Ziet er netjes uit kan niet wachten voor deel 2. Ik vind die trap tractor al geweldig met die motor er in ben benieuwd als je de jetski klaar hebt wat voor moois je dan gaat maken. Ik zou zeggen blijf heel veel leuke en creatieve filmpjes maken 👍🏼😎
Just found your channel and just found my next project. Awesome work, now heading off to watch your back catalogue. Patiently waiting (not) for the next instalment. Stay true.
`Mooie projecten, kleine tip als je 2 componenten moet mengen; in een beker en dan roeren, dat overgieten in een 2de beker en nogmaals roeren. Niet in een verfbakje willen roeren, dan krijg je het nooit goed consistent gemixt met kans op slecht drogende/uithardende stukken in epoxy of verf.
Lekker bezig, mocht je een betere hechting willen op het hout dan zou je als primer G4 kunnen gebruiken is 1component. Na het aanbrengen kwartietje laten intrekken en dan plakt heel het opperplak. ook makkelijk op plekken waar je ondersteboven moet lamineren, gr
I like it , i was excited about one small hull but it was stitch and glue , no frame so it's sort of styling or it needs aluminum , Oh i wonder if it's possible to use the jetski [edit: jet drive] template on carbon fiber , it's small enough to maybe vacuum cure it and all seems like ...oh , another was maybe use it as the inner mold and cast it integral with the hull spars and stuff and fiberglass it thick instead so it's paper template, assembled is the cutaway foam that gets glassed that geometry with the rest of a hull was the other ,,, too long winded nice vids and plans it looks like
how to build a boat : firstly 1 design a jetski , 2 use the plans and configure to your personal choice ,3 build the jetski half way , 4 put an old boat engine to your half jetski . and finally 5 ENJOY your new boat :> man it has never been easier to get your own boat. 10/10 recommend this video
I mean, why not 😂. I thinks it’s real cool you put the plans on your website for this jet ski. If you where here in the states I almost guarantee you wouldn’t of had an issue finding a used jet ski engine. Especially near where I live. There is always someone trying to get rid of a used jet ski. Also that is real cool how you made templates to stick right to the wood, great job bud!
Plans: homemade-madness.com/shop
Where do you get the blueprint do you make it or did you buy it Thank you for your work Tell me please
bro share one
@@faizabbes889 did u not watch the video from the start he made the plans on his computer u need to wake up ur a sleep he sales them for $70 on his web site
Hi I'm no inglis pdf 👍
سلام خوبی آقا من از ایران پیام میدم ببخشید میشه لطف کنید نقشه ساخت این قایق را برای من ارسال کنید مرسی
A "easy" task done by him again.
You have a high level of skill, keep going king!
High level of skill? I think not! If YOU think this is high level skill, you have no idea what high level skill is.
@@doesntmatter3068 it depends on the way you see skill, dont come say me you know better about making anything, when you clearly dont seem to know anything about 3d modeling and making it a reality.
Good Planning makes almost everything much Easier ! !
Boat building tip: to avoid deformation, build up a hull piece by piece symetrically - not one half first, then the other half. It prevents potential warping to one side, and will also make things more even if you want to do seam corrections simply because they are fresh in your memory as you go.
😊
aliphatic glue would be better glue for the paper to wood, for a 22yo your doing some clever things unlike others on youtube, your building to a set of plans, I'm impressed by your engineering, keep it up Jornt you'll go far lad😎👌
Thanks!!
totally agree with you. i build model planes and love the aliphatic glues too. This is a very neat clean build. I'll be following your channel from now on.
@@homemade_madness zdrastvuyte, ya khotel by svami svyazat'sya kak my mogli byt'
been using spray tac adhesive like he did for a while... seems to work fine too.
The worst part about finding this video is that when I saw part 1 I got excited then saw it was posted on May 15. Well, I'm bummed I can't binge-watch this but I'll def be here for the rest of the project!! Good luck!
🤣sorry😅
Good job as always. I love how you did all this and never even had to pull out a ruler 🔥
Wat een vet project man, en respect dat je al het werk allemaal zelf blijft doen! Lang niet iedereen heeft de luxe om een CNC te gebruiken, maar een decoupeerzaag hebben de meesten wel. Top werk, ik kijk uit naar het volgende deel!
Vet he! Kleine note: bij de meeste Makerspaces is meestal tegen een kleine vergoeding een lasersnijder te gebruiken, dus dan is in 2d snijden voor de meeste wel een optie! Maar een build met gereedschap wat iedereen al heeft is altijd fijn.
This is going to be an amazing series! Can't wait for more
Sweet build so far! Looking forward to part 2!
Your idea for producing wooden boats is great, thank you for sharing
This channel is awesome I can’t believe it hasn’t caught like wild fire with the subs yet
Thanks!🤷🏼♂️
I'm impressed with your skills and knowledge young man. You certainly will go far.
Please make these plans free of charge.
I love this jet ski.
Can't wait for part 2.
Looking forward to part 2 😊👍
looks like a new favorite channel, cool!
Really cool it will be super strong with all those frames !
You're Magical Young Man. Materializing things of your ideas right from combination of your Brain views, intelligence and mindset is very rare amongst common men. You're worth millions and millions. Without any doubt Someday you're going to be a CEO of your own foundation company industry. You're going to be designing building and materializing many more bigger and biggest usable things for people of world over. 👌👍✌️❤️🌹🤗 I'm learning more from your videos about your own homemade automotive utility things. Your video presentation of exiquting your automotive ideas into reality is excellent. Added along with your super best workmanship. ❤👌👍✌️😊
a few issues.
1 you should apply the resin before laying down a fibreglass layer. helps stick and prevents bubbles and warping.
2 You wore a respirator when applying the fibreglass but not even a mask when sanding it. That's how you die. Sanding Fibreglass is the most dangerous part
yea was good up to the fiberglass part, it's a must to apply resign first let dry apply a 2nd coat let dry, sand then apply a bottom coat then add the mat and glass top, people forget that the wood sucks up almost 75% of the resign meaning it will fail rather quickly.
This man deserves a subscribe and like. Watching from the Philippines.
you are a good designer
Looks awesome, keep up the good work!
Je hebt mij weer overdonderd, man wat ben je goed en veelzijdig, kan niet wachten op deel 2
I've been toying around with the idea of building a dirtbike/jetski hybrid for a while. This homemade jetski gets me excited
When I was 22 i couldn't find my ass with a map. Good on you homemade madness guy your stuff is amazing!
Looks awesome bro! Some time ago I was searching on TH-cam for home made jetskis and I couldn't find any decent one.
Absolutely awesome. Don't forget to use a respirator if you do a lot of this stuff.
Found your channel through this video. Just brilliant. Really looking forward to more on this Jetski!
That thing is like the spruce goose ! Its gorgeous
You are an absolute genius young man absolute genius
Very nice designs, and I'm glad your using your PPE.
Congratulations bro. Bunch of respect from one DYIer to another. 🇺🇲
volevo farti i miei complimenti veramente un bel progetto volevo solo chiederti se lo scafo lo hai progettato tu o hai comprato il progetto su qualche sito on line
The wooden hull form could also be used as a fiberglass mold form for composite construction
My thoughts as well. I would have made the frame an exoskeleton and skinned the inside to make a mold and flipped a hull out of that all in fiberglass and composite
@@holmes1956O Yes, some pinholes covered over with mold release and plumbed to a compressed air supply would pop out real nice fiberglass (carbon fiber) and foam hull sections nicely using vacuum forming. By the way what happened to part 2 of this build?
0:01; nice oneGot lots of free marine plywood offcuts but I will screw little bit on angle makes the structure stronger!
Not to take away from the excellent build but if you would have used the same panels you could have eliminated the frame all together using the “stitch and glue method”. It is the same process except no frame and it is almost as strong while being much quicker to build along with approximately a 50% weight reduction!
Ziet er gaaf uit
had toevallig vandaag op vakantie het idee om er zelf eentje te bouwen en nu zie ik deze video van net 3 dagen oud
Perfect !
That's a sweet little boat, nice work! That hull should be almost indestructible, given the thick plywood you used. Should be just about right for a jet-ski! 👍
might be fine for lakes and rivers but spending a summer out on the ocean with that is straight up suicide.
@@s0nnyburnett - I never really considered a jetski to be an ocean going vessel either. Plenty of fun to be had in fresh water, though!
th-cam.com/video/KxRtQOT8rEQ/w-d-xo.html
@@N1RKW lots of people use jet skis offshore, people even go from Miami to Bimini
When you purchase something, you feel happy but when you create something, you feel proud.
Great video and great designing, way better than I could ever attempt. I am currently building a stitch and glue sailing dinghy and I have a few suggestions: I am not sold on the PU glue that you used. Epoxy resin with wood flour or an additive like cel-o-fil that is designed for structural bonding and filleting would be a better choice. Also, try your hand at designing a stitch and glue hull. Instead of a frame with planks attached, bulkheads are used to add rigidity and water tight compartments for floatation. I think you could do it and would simplify the build process for any future designs.
Vet man!! Heb wel eerder gedacht om een boot te kopen/bouwpakket in elkaar te zetten... en dit komt perfect uit!! Ga de tekeningen bestellen!🤩🤩
👊🏻👊🏻
Thank you for the Work you do. I will enjoy building this one. I expect it to produce many fun hours.
Any plans of filling the hull with foam? A couple of large blocks in the bow would prevent complete loss in the event of a catastrophic accident. Copying the inner design of the Yamaha this is modeled after would keep it afloat in a hurricane.
Yeah thought about that would be a good idea
@@homemade_madness Als je dit gaat doen dan even de 2 componenten van polyservice bestellen. Het purschuim uit de bouwmarkt neemt namelijk water op en dat zou zonde wezen van deze mooie creatie.
@@opelckadett Do you know the name or general chemical name of such 2 component foam?
There are 2 component foams available that will fill up void spaces... They are registered and often used in pontoons
@@Snakebestofbest Thanks. I'll have to research.
Lekker bezig filmpje kijkt lekker weg.
Me vriendin is ook blij dat er niet contant tools te horen zijn.
Ga zo door !
Great skills bro! I'd like to make an electric version for my channel. You said 3 people could fit on it, would it be possible to scale it down slightly or is the scaling joined with the design? I would 3D print the jet drive and impeller. Think it would work? 😅
Thanks man, been watching your channel for years😅 I think it could be done, best thing is to just scale the big papers, and scale them down by 15/18 (0.833) Then you can use 15 mm thick plywood for the framing (instead of 18) and all the notches will still fit perfectly😁 also a 3d printed jet drive is possible, check out DK the welder, he has some cool small jetdrive builds. Goodluck👊🏻
@@homemade_madness the parts u call truses are really called ribs
@@homemade_madness next time you fiberglass something they make special rollerrfs for doing fiberglass
hi im from phillipines,i truelly admire your method of work,keep it up..
Good job. Subscribed. Also I would use a respirator when sanding fiberglass to avoid inhaling it.
Wow, this is really a wonderful video content Sir , since I was a kid I was obsessed with boats until now I'm still into dreaming of building one but I can't afford to do it since I don't have much , and then there comes your step by step video of how to create it , and then it gives me an inspiration to maybe try to build it bit by bit , and follow your drawings, instructions,dimensions and as well as your dedication to get it done . I just hope I can have your full or complete boat plan on my working table for in one way or another it could me help build my dreams. God bless you Sir, stay safe and healthy to keep you doing what you do, and inspiring us . It is an honor for me if one of these days you can share me your ideas on my first project. Thanks.
Great job on those plains, if some one told be they are going to do what you are doing I would think "never going to happen" but I some how think that you can indeed do it...
Amazing engineering and encouraging build of a superb project! Well done!
This is great!
So nice of your sister to help you carry it out! 😉
Love from Australia
LEEEEEEETTTSS GOOOOO!! that was awesome man love the content!!
10 stars for this project 😎👌👌👌
This is awesome dude!
Buddy ,you are a genius...good job!
You are a genius Man, very good!!
Fabulous. Can’t wait to see how you make the jet engine
that looks like a solid little hull.
That probably took forever to dry depending on the temp of where your at. Glad to see you are still leading the game on project/builds of DO-ABLE fun projects. Your videos are prime for helping people that want to make something. Keep at it
a jet boat build would be funnnn?....
Cheers from Amsterdam 🇳🇱🍀✊🥂 goed bezig!
a good alternative for the glue is "grip fill" the toxic version works better but use in ventilated area.
Ur a freaking genius madness!
This is so cool! I thought you were building the jet ski 😅
I saw "lijm spray" I knew you were Dutch. We all sound the same talking english xD goeie build man lekker bezig
Unbelievable dude. For young generation like u. I'm going to be your subscriber and can't wait part-2.
Have you ever thought about selling all the wood parts cut to size already and mail the plans from pcs's cut on to finished product I would be interested in that...
When I was a kid in the early 80s my neighbor made some kayaks using the same skeleton frame design and then covered them with a canvas and waterproof paint.
Ziet er netjes uit kan niet wachten voor deel 2. Ik vind die trap tractor al geweldig met die motor er in ben benieuwd als je de jetski klaar hebt wat voor moois je dan gaat maken. Ik zou zeggen blijf heel veel leuke en creatieve filmpjes maken 👍🏼😎
might have to do this as a winter project
Amazing project! Greetings from Iraq!
Im suprised by the power of the drill!! Cant wait to see some real power in it!
One day I'll be this cool, mark my words! Killer shop, man. Way to go the distance.
Just found your channel and just found my next project. Awesome work, now heading off to watch your back catalogue. Patiently waiting (not) for the next instalment. Stay true.
Mate.. you want to build one with an alloy Hull for taking up rivers. Game changer.
Thanks for sharing this video of making this amazing boat hope I can built like this
this guy is very smart even his plans r so cheap
`Mooie projecten, kleine tip als je 2 componenten moet mengen; in een beker en dan roeren, dat overgieten in een 2de beker en nogmaals roeren. Niet in een verfbakje willen roeren, dan krijg je het nooit goed consistent gemixt met kans op slecht drogende/uithardende stukken in epoxy of verf.
Cool project 😁 👏
Lekker bezig, mocht je een betere hechting willen op het hout dan zou je als primer G4 kunnen gebruiken is 1component. Na het aanbrengen kwartietje laten intrekken en dan plakt heel het opperplak. ook makkelijk op plekken waar je ondersteboven moet lamineren, gr
Well done, my friend…. well done.
Thanks for sharing!!
smaller than the tiesgames boat but a lot more skill and attention to detail involved lol. keep up the good work. that is one big jetski tho 😅
This is going to be fun to follow!
Beautiful brother!
Nice work dude..🍻
awesomeee proyecto already waiting for the next one ! cheers from Chile
Dude. U just keep surprising the hell outta me . Keep it up
Nice😁 will do👊🏻
Hell yeah that’s some awesome engineering and skill you have! Keen to see it go much faster.
th-cam.com/video/KxRtQOT8rEQ/w-d-xo.html
I like it , i was excited about one small hull but it was stitch and glue , no frame so it's sort of styling or it needs aluminum , Oh i wonder if it's possible to use the jetski [edit: jet drive] template on carbon fiber , it's small enough to maybe vacuum cure it and all seems like ...oh , another was maybe use it as the inner mold and cast it integral with the hull spars and stuff and fiberglass it thick instead so it's paper template, assembled is the cutaway foam that gets glassed that geometry with the rest of a hull was the other ,,, too long winded nice vids and plans it looks like
bro finally someone did it right
Mooi gemaakt en interessant om dit te zien.👍🏼😃
Amazing work!
Je bent ook van alle markten thuis, top hoor👍🛥⚓😊
You did a really great job. I wish you a lot of fun with your boat.
It'll be comical seeing you launching that at the slipway with the mini deeer🤣
🤣🤣not sure about that…
Thanks for sharing these idea!!
I’m going to build this next month! This looks awesome!
Congratulations. Brutal job 👌🏿
how to build a boat : firstly 1 design a jetski , 2 use the plans and configure to your personal choice ,3 build the jetski half way , 4 put an old boat engine to your half jetski . and finally 5 ENJOY your new boat :> man it has never been easier to get your own boat. 10/10 recommend this video
Very nice. Looks like a great place to live too.
I mean, why not 😂. I thinks it’s real cool you put the plans on your website for this jet ski. If you where here in the states I almost guarantee you wouldn’t of had an issue finding a used jet ski engine. Especially near where I live. There is always someone trying to get rid of a used jet ski. Also that is real cool how you made templates to stick right to the wood, great job bud!
Dang, thats a nice boat!