Homemade JETSKI Build - Part 2
ฝัง
- เผยแพร่เมื่อ 4 มิ.ย. 2022
- 🏹 Start playing Hunting clash for free on your iOS/Android device huntingclash.link/HOMEMADEMAD.... Use my promo code HOMEMADEMADNESS to get an awesome starter pack for a total value of $15 (available for new players only)🦌
Homemade jetski Part two! building the top half, turned out very good! next part: building a custom jet drive.
PLANS and more info: homemade-madness.com/shop/ - วิทยาศาสตร์และเทคโนโลยี
🏹 Start playing Hunting clash for free on your iOS/Android device huntingclash.link/HOMEMADEMADNESS. Use my promo code HOMEMADEMADNESS to get an awesome starter pack for a total value of $15 (available for new players only)🦌
the promo code is not working 😕
I used your link to download the game as well.
it's saying invalid code try again
Worked for me 👍🏻
I already downloaded the game..I'm 44yrs old man.. never been holding the riffle then shooting the animals..now I can...but only the game.tq.
Looking great so far!
Recommendation: Add some spray foam into the various cavities within the hull and top, as much as you reasonably can. This will add some more buoyancy, which would be useful in the event that it gets swamped. It could make the difference between a swamping and a sinking.
Great recommendation 👍, just be sure it is hydrophobic foam that is lighter than regular poured foam.
My older brother built a floor for his fiberglass boat and used standard polyurethane pour foam in the voids that ended up absorbing water like a sponge. He thought he was making it unsinkable, like a Boston Whaler boat.
@@SPHYNX99752 too true the wrong foam works like a sponge and once it sucks up a heap of water it's damn near impossible to get out shy of removing all the foam. had this happen to a mates rc boat had to dig all the foam out to get it dry, ended up replacing it with polystyrene no problems after that.
Fantastic project and a lot of great engineering work. One thing though: pleeease wear a mask and goggles when sanding fiberglass. That stuff is no joke.
ABSOLUTELY!
He use vacuum sanding machines, wear googles and mask isn't necessary
@@AudioAdios That's like saying "I have airbags so I don't need a seatbelt"
@@XTJ7 beautifully said
my thoughts too.
On second thought you could also use closed cell foam in-between the ribs of the bottom inside of hull then cap it with 1/2" inch plywood and fiberglass over that and your Jet Ski will be unsinkable!!! Awesome work!!!
Hi mad man genius and all watching and reading. I ordered my plans and in only 5 minutes I received them. Now that's service. Thank you. Can't wait to start with this project and with a little bit of additions convert it to my own build off shore fishing jet ski
This thing wil be so Cool when done. Most boat plans out there are from the 50's. Good to see some more modern ones being made.
Can’t wait to see it completed! If the plywoods wasn’t going to be so expensive I’d probably build one myself!
you could add an extra first step of tearing up pallets and glueing the strips together into big slabs !
Absolutely talented, extremely well rounded craftsman. Usually I go for the crazy builds, although that being said I’m so impressed with his skills. Also having myself done a fare bit of watercraft haul building and fiberglassing it would be fun to take a trip down memory lane with this really chill dude. Keep up the good work!
you should use it as a mold and fiberglass it and sell the boat blanks so folks can build their own its never been done, you should do 2 or 3 layers fiberglass, you are using marine ply
Very good! You teached a lesson for who wants to get one and doesn't have any money to buy one: "Do it yourself!" That's enough planing.
It's very cumbersome for a paddleboard 😉 Nice work young man. If I was 30 years younger, I might even try to build it myself. But at nearly 70 years old, and in a wheelchair, I might find it a little taxing. Can't wait to see how the jet drive comes along. Kindest regards, Dave W (UK veteran pensioner)
Awesome build. Patiently waiting for part 3! Keep up the great work.
Plans: homemade-madness.com/shop/
This looks awesome! Great work I can’t wait for part 3!
Not sure if you’ve thought about this yet but you’ll need some sort of air intake for the motor, if you are relying on the gaps around the seat than the motor will run terribly. A gravity or float trap can be used on the inside of the intake of the hull to prevent water from getting in if it flips.
Will do!
@@homemade_madness I would add to this that you need a bilge plug, or some other way for water drain from the hull, ideally it would also have a bilge pump. Are you going to make the front a storage compartment?
Proud to be Dutch if I see this! Great work and engineering! Really nice
I'm thinking a trailer for this will be the next project, love your work, you are the definition of "where there is a will there is a way".
Very very cool!
Amazing job , I have confidence in you that the final project will be fantastic. Looking forward to part 3. Good luck to you.
Man... I like this build so much! Can't think about how much work went into it... Can't wait for the next parts! Keep it up!
Definitely one of my favourite build series at the moment
Bro I so need the next part I'm hooked
One of the coolest builds I've found on TH-cam
Part 3 please Watching from Philippines 🇵🇭🇵🇭🇵🇭
Amazing build and i cant wait to see how you build the jet drive. Happy to see you took the advice i gave you did a waterproof coat of polyester resin on the inside og the hull, i love tour engineering skills and I got inspired by you to do my oen boat build in solidworks, but bit of a learning curve on that amazing software, thank you and keep up the good work
You continue to amaze me with your creative and “out of the box” thinking. Great job my friend! 👍🏼👍🏼
Ik heb er alle vertrouwen in, benieuwd naar de volgende video👍😊
Wow, amazing that you are actually building this. Very impressive
Keep up the spirit, keep on supporting
Great job! Sweet build and well
Made plans
Crazy amazing build!! Nice work 👍🏻
Serious creativity. I appreciate your great effort. It deserves encouragement
I've been waiting for this video to drop since part 1. Man I am so excited to see this project come together
I've waited a long time to get this continued.
Really coming along this is bud. Looking very smart. Can't wait to see this ripping down the lake! Top job
My hat off to you. Excellent work!
Awesome!
Yes finally! Been waiting :)
Same🤪
Thanks for your idea
Well done, my friend…. well done.
Thanks for sharing!!
I can't wait man 😫😫😫 such a great project
Thanks for the share ..I should do my own now
this kid is amazing ! well done for all your hard work 👍👍
Good job! Really looks good.
Wow that's cool!! Great work buddy 💯👏
Mind blowing. Well done as always! 💪🏼🔥
This is fantastic. The only design changes I'd make would be to add storage under the foot boards and make a hinged front hood with a large storage area. I'm not sure if I'd want to use a gas or electric motor for this. In any case, building one of these on your own means it could be completely customizable to meet your needs. Again, very well done.
Maravilloso trabajo has hecho joven.Espero verla terminada.Bendiciones.
Very interested to see how you are going to create the engine mounts, intake grate and mount the pump.
I think that PVC sheets could be better than wood, to prevent water moisture from entering, I hope you have great success in your next project!
Wow it's amazing, and looking good
Really changing the idea of what people can do with plywood. Insanely impressive allready, cant wait to see you put a motor in this thing!
WHO do YOU think you are coming on TH-cam and absolutely crushing everyone in the DIY game!?!?!?! lol your content is top notch my man!! ive never actually waited for a part 2.. but i had to with yours!
Haha thanks man!
Real professional experience, like the work 😎🇧🇿...
Mate, I can't believe you're making your own jetski, and it actually looks like an actual jetski, bought from the shop. Well done! You got skills.
great job brother, tnks for sharing
I loved your project, you did a very good job.
Great work once again man, this thing will be so cool when it’s done. Curious about what you’re going to do with the engine and propulsion system, looking forward to the next video. Fryslân boppe!
Well done you.... Inspiring... And Ive more to watch..... Can't wait to send vids of your jetski that I built
This 1 hell of a project I have been eagerly Waiting for......
Good luck with the project
I know it would be a lot of difficult work, but you may want to fiberglass the inside of the jet ski. I'm a surfer, and I can tell you that the minute you get that thing out in the waves, the inside will get waterlogged. That plywood on the inside will soak up water without a fiberglass covering. I suspect you're only building this thing to ride around in the harbor.
Why not take what you have and pull a fiber glass mold off of it. That way it is way lighter and faster.
Muito talento e capricho! Like e inscrito!
Brilliant skills 👌Awesome video👌 Love the results so far 😍🥰 and can't wait to see the next stage🤞, I wish you the very BEST 👍👍👍👏👏👏✌❤🍀
Very nice working~
This thing is fricken' sweet! Nice work!
Also, I don't know why, but YT refuses to recommend your videos to me even though I'm sub'd 🤷♂️
Thanks, hmm thats weird ive heard some other people saying the same thing…
It's because YT is experimenting with a new AI based on Social Credit Scoring (SCS). That means each person is tracked for every video they watch and each comment you make. Each is scored with SCS points. You don't want any points, as a point indicates something you have watched or said goes against the chosen narrative. So if two people try to connect, and you both have significant points, then YT does not want you two connecting. SCS has been in use in China now for over 4yrs. There are approx 3million Chinese citizens who have achieved a high enough SCS that they are no longer allowed to fly on planes or take a subway or train or post on the Chinese internet, etc etc. Once Digital IDs (DID) get fully implemented, you can see that your entire online existence can be controlled, or even deleted, with SCS and DID "working" together.
Good morning, can I ask exact size the width, length and height
Trying to Dumb Us Down More !
props bro! this i mad
Amazing as always, hope life is good.
hey man this is awesome! cant wait to see you finish this bad boy, and honesty its kinda making me wanna take a crack at making one myself, never made a jetski but have worked on several boats, but I do have one thing that i hope you do before you continue, you need to fiberglass the inside of both the top and bottom inside the hull, if you dont, then when water does get in there, and it will, all that hard work you did will be rotted away! not a critique just friendly advice
I agree, at a minimum I'd glass every joint and edge. Maybe some closed cell spray foam too for additional protection and it might help it stay afloat if it ever takes on water. Want to build one of these, gotta finish up my current airplane build first tho.
Agreed - polyester on wood don't do much and it will crack/delaminate at some point. I would fiberglass while polyester is still wet on the wood - same as with outside. 🤔🤓😁
bro greetings from the city of Pemalang Indonesia
Loved it❤️❤️❤️
I just got these plans and all the wood. Can't wait to start
mad impressive
Great video! Can’t wait to see the next one with the motor build
If you want your Timelapses to flicker less use a manual exposure mode (or exposure lock if you’re using a phone). They look really cool with whatever motorized slider you’re using!
Yes i know! Will do next time thanks
This is a really cool project, but I think it takes some of the fun out of it when you're showing the finished result at the beginning of the video
Amazing project! Greetings from Iraq
Things getting nice !!!!!! I cant wait to see the result :)
Good progress 👍
You really need to put fiberglass inside too. it may not be strong enough. Like others have mentioned, maybe also use expanding foam in the hull for added buoyancy in case of swamping.
Very cool buddy, good for you. I'm also jealous of where you live. It's so beautiful, I can't wait to see this finished.
Thanks😁 holland
Incredible work. Should have used the wood body for a mold and then made it all from fiberglass.
Bravo, c'est incroyable ce que tu fais ;)
Very cool
Very well made it will be super strong 💪. Good job on getting the sponsor too, I think that hull will handle any motor you put in it👍
Thanks man! Yeah should be fine but i will reinforce it some more later
awesome work mate good job
Damn cool, but looks extremely heavy. I made "jetski" Pelikan for 30hp outboard motor out of 4mm plywood. Frames was reinforced with 20x20 planks. Deck 4mm also.
Covered with 2 layers of fiberglass.
RESPECT = GREAT JOB
Very skilled engineer and manufacturer, really really impressed! WELL DONE looking good so far! Let’s see if the result will be as good as the progres :)
Saludos desde colombia. This is amazing, you are genius bro i am waiting finish this project. then star my jetski buying your plans
Beautiful design
The build is epic. Though I would say that I don’t think that you’re mixing the MEKP into the resin properly but I can’t see what is happening off-screen.
It’s really important to mix that stuff thoroughly and in the right proportions. Plus it’s extremely dangerous stuff and should only be handled with the proper PPE on.
Very nice, waiting to see it crossing the sea :D
Nice video mate. Very good content . Keep going. 👍
Awesome 😍😍
I would also hinge and seal the top and bottom to make the easiest access for your mechanical installation.
ik kan niet wachten tot je het volgende filmpje post. Zeer leuk project! Zou ik ook best eens willen maken. Mooie handleiding en cad tekeningen. Zo te zien past alles zeer goed in elkaar. Love this project!!
One of the best videos ive ever watched 🔥❤️
You're doing great job bro
Waiting next part 3
You are the best bro