Hey guys, I've been following your chanel for about 5 years now and have never missed an upload. Needless to say, I love what you do and watching your vides has inspired me to start fabricating myself. Can't give you guys enough props for that. However, If there is one thing which bugs me, it's the fact that you tend to hop onto new projects super quickly while there is an ever growing heap of unfinished builds which we often never hear anything from again. I fully understand that some projects get dropped, either because it just isn't turning out the way you had hoped, or maybe it just doesn't gather enough clicks, or Ethan's ADHD kicks in... But for me, it has come to a point where your yard is starting to look more and more like a graveyard for abandoned ideas and that makes me sad. But then again, I'm just a bloke behind a PC halfway arouind the world so do what yuou want. Peace out, hope you keep going for plenty of years
@@xpndblhero5170 the comment is still correct.... that load was nothing as far as lifting n the capacity of the rig . Understand if a hydraulic crane weeps it red flag n not used....the acceptable amount of weep or creep is exactly zero
His idea for independent steering wheels on each side is brilliant. Make it super funny by throwing in separate pedals for each side so each homie controls their side with their own engine and direction of power. Would be cool either way to see you give Patrick a welder and get him in videos more he’s great.
As an old jet ski fanatic I’d recommend vacuum testing the engines so you know they don’t leak air making the tuning process a lot easier and not always chasing making them run right.
Yes leaking crank seals can cause a lean condition & burned holes pistons . Check all fuel lines for leaks and those rave valves should be cleaned & adjusted properly. Used to radar run my Mach 1 years ago and that's part of keeping them tuned up and running hard .
hello my name is William and i love your content and i just wanted to ask if you needed help. id move up there and work for free with room and board. I'm struggling and need a change. I can turn a wrench and im really good with electronics. plus i love dogs and drones, grew up riding a cr80r as my first dirt bike then a cbr600 as my first vehicle. if you would be willing id be seriously willing. again thanks for the content guys
Thats a c-130 with a Modular Airborne FireFighting System (MAFFS) used to assist/augment forest fire crews by dispersing phos-chek/water/retardants. We started a ton of range fires during the summer and they had one stationed at the airbase nearby. Watching it deploy the entire payload with accuracy is really impressive - you wouldnt think such a massive cargo plane could move that quick or turn as steep and as fast as it does… its a whole different story riding in one when flying in or out of a combat zone!!
its from the ppl that throws cars off the cliff thats near them they were having a show with a bunch of ppl, surprised they dont know about it th-cam.com/video/T8MsMHGVR1U/w-d-xo.html if you click through the video youll see the plane doing low fly bys
As the drone flew overhead helpless..I recalled a scene from the 5th Element with the monk asking Zorg if he thought his little toys and creations were of any use as Zorg choked on a cherry.😂😂 Love the episode! Great work.
wow, another great build, cant wait to see it finished. Would also like to see more power wheels going around the track you built before it start snowing and maybe some builds around the track to get some racing going on it.
Definitely enjoying the...revised...lineup, guys. Back to the feel of show that got me hooked from bicycle-treehouse-elevators. (We didn't need yet another channel of keen young blokes with enthusiasm and no clues.) Looking forward to your future projects.
Now you all can race ole' Cleeter. Dude destroyed his MTN Dew jetboat on the rapids, but it looked so worth it. I'm all here for the jetboat content. 👍
So rad hearing about Fireball Tool, since I got hooked with so many of their projects, and now being pretty much every week waiting for your content, it's awesome to see both of you guys crossing paths.
Huge fan, longtime viewer, even live really close to you guys! With that being said, I do not miss Will as much as I thought I was going to! Not trying to shit on him, but after viewing his new content I feel like your guys style inspires me to get out in the shop and work on my projects And again, no hate just my opinion
Edwin, that was an interesting spill. Looked educational too!! I don't tell you often enough how much your love for Idaho's outdoors shows, even when you only edit.
Remember, it used to be called "Starboard" and "Larboard", "starboard" references the side the boat is steered from, literally came from "steer-board" as it used to be a board lashed to the side to steer from. "Larboard" is the load board side, where you'd load and unload the boat, or now it's just called the port side. Larboard starts with L so that's easy to remember as Left
@@franmcgowan4068 i was taught a little saying that always stuck with me "There's no more Red Port Left in the bottle." covers the red/green markers too that way
I like how you decided to swim after it. I could see you change your mind about it several times like, “should I? But I can’t swim that fast… But I should at least try. But it’s a jet ski. But I can’t just stay out here in the middle of the lake…”
One time I had a tether snap, but I was lucky enough that it turned and came back to me where I could pull the key. I was also lucky because I was in the middle of a big lake with a lot of big boats so it's a good thing I wasn't stranded.
Some Advice on those Rotax's Keep the injection pump! the Rave valve needs the lube, But just toss a little bit of oil the fuel too. And yes thats a WestCoast Head on the one, has interchangeable Domes for Comp, and orings seals that needs to be replaced if you dig into it. Cheers like this one!
That's what I'm saying It would be super cool because Because you can do a quadrunner half where it's got wheels and it doesn't float anymore or you could do both where it has wheels and can still float and drive in the water.
The mini jet boat needs to be re-wrapped! Excellent video as usual! As a suggestion, when mounting the engines, use a single jet, with a chain driven drive shaft. The engines could point opposite directions, so the inlets are both on the middle and the exhausts to the outside.
I've been waiting a few years for someone to do build twin side by side engines for a mini jet boat. If the Offshore big boats can do, so can one using a mini. I picture a little bit bigger mini with Twin supercharged Rotax motors on dual thrust outlets.
I'm such a 13 year old. Sitting here chuckling about homie saying that we really don't know how it runs until it has a load on it. Shit. Lol. Love you guys.
Lmao I swear I thought that green gremlin was the evil toe fungus guy from the Lamisil commercials back in the day, either that or the mucinex mucus monster
Like I said last week.... If you need seadoo help I'm your guy. The mpem is bad there was no reason to go into the mag housing...and it looks like you got a crappy sbt rebuilt motor in the one. The modded one in the other hand that pipe is worth 500+, the sponsons are worth 200. Lol and I programmed the key for that replacement box you bought.
Didn’t think I’d say this but this show is definitely more premium without Will. I think it was a good call for him to go on his own to do what he wants, not hearing places you can even walk for the Billionth time each episode is nice. Pat would definitely be a good addition
Patrick is a good replacement for Will. Smart, funny and professional. Will can just keep trespassing on private properties, and build ugly machines, while GrindHard builds cool machines on their own property 👍
Will is a young buck, making his own way. One has to respect the hustle. You might not like his content, but the kid has talent. Ethan thought him well.
you should style the throttle after a multi-engine airplane throttle, that way you can easily control both at once or have differential thrust for sharper turning. or simply have a right and left hand throttles.
At the moment the only youtube channel im looking forward too! Cant wait for new videos guys! You inspired me to keep on going with my own projects that are sitting for way to long.
"Grind Hard needs to get into aviation someday" FINALLY!!! YES! I sent you plans for the Budgie, a utility short take off, ultra rugged leisure single seat aircraft designed specifically for your skillset and construction style - build it please!!! I'v said that on literally every video - it's time. FYI that was a USAF C130-J likely doing water drop training
Crazzzyy Idea I just had idk if it is even possible but what if you turbocharged both engines with 1 turbo and you merge both exhausts into the hot side and Y-pipe out of the compressor and then run 2 maps Mabey idk just a crazy thought
Think steer-board instead of starbaord.. the word derives from ships having a steering board on the right side, therefore they had to dock with the left side to port, so not to wreck the steering board (before rudders where a thing)
Ok, paint me in envy because you got 2 things now that id love to have, a jet stream jet boat and a fireball fab table. The boats are probly the best adult man toys on the market and the table is a fabricators dream.
I almost knew when you said I got a new fab table that you got one from Fireball Tool. Those things are so awesome, wish my shop had one. I'm also jealous of the scenery on that lake in Idaho, that is beautiful.
Cletus McFarland has the micro boats also! He has videos of them thrashing those poor things. Awesome. Can't wait to see what you all come up with. Thanks Ray
19:23 turn the hull into a motorcycle or dirt bike. 😅 I would love to see that. I totally wanna do that one day!!!!! Also in winter …. You have to try it after the summer.
Pretty cool that you guys got a Fireball Tools fixture table. I started watching both of your channels about the same time. I'm thinking a collaboration is in order.
I wonder if that silver block is a SBT rebuild. Also make them fixed drive and use independant throttle to steer like a tank jet boat. Then you can skip all the steering stuff
Someone definitely raced that ski. Umi controls, beach house sponsons, west coast head, spec 2 factory pipe, R&D flame arrestors… that engine has so much more power than the other. I’m very interested to see how that affects the ski. I would look into finding another spec 2 pipe, they really wake them up. Rebuild the carbs and ONLY USE OEM MIKUNI kits. Looking forward to this build!
Love watching y’all’s channel. I hope Will is OK. I haven’t seen him in a video in over a month or so. I hope everything is so great love watching y’all build and have a blessed one.
New jet boat series! What do you guys think?
Yoooo that reverse through the field next to the trailer was minty as f
Wtf where is the hummer video we got screwed over this week
Hey guys, I've been following your chanel for about 5 years now and have never missed an upload. Needless to say, I love what you do and watching your vides has inspired me to start fabricating myself. Can't give you guys enough props for that. However, If there is one thing which bugs me, it's the fact that you tend to hop onto new projects super quickly while there is an ever growing heap of unfinished builds which we often never hear anything from again. I fully understand that some projects get dropped, either because it just isn't turning out the way you had hoped, or maybe it just doesn't gather enough clicks, or Ethan's ADHD kicks in... But for me, it has come to a point where your yard is starting to look more and more like a graveyard for abandoned ideas and that makes me sad. But then again, I'm just a bloke behind a PC halfway arouind the world so do what yuou want. Peace out, hope you keep going for plenty of years
WOO-HOO going to be Dummy Fast you should name it the gump or forest lol run forest runnnn lol i know you cant but thanks for the video
WHY NOT CONNECT BOTH EXHUSTS 2 INTO 1 EXIT ????
Check those hydraulic seals on the skid steer! The time lapse showed some dropping forks while holding that table! Be safe boys
holy shit, just got to that part, you're not joking. Deff some bleed down.
No Bueno! 😳😰
True story
That's because it was heavy as fk.... I think he knows about it because he didn't like when they worked on stuff under the forks.
@@xpndblhero5170 the comment is still correct.... that load was nothing as far as lifting n the capacity of the rig . Understand if a hydraulic crane weeps it red flag n not used....the acceptable amount of weep or creep is exactly zero
I like seeing Patrick still hanging out around the shop. He'd be a great addition to the team
Parrick is too funny! I like the dude.
Agreed!!
His idea for independent steering wheels on each side is brilliant. Make it super funny by throwing in separate pedals for each side so each homie controls their side with their own engine and direction of power. Would be cool either way to see you give Patrick a welder and get him in videos more he’s great.
💯
Agreed
That old dude you got the second ski from seems like he could have A LOT of stuff you can use and make cool!
He did look like he had a lot of goodies!
Alot of garbage! He need a good cleanup
Patrick is a great addition to the channel. Great positive attitude and no fear. Good recipe.
Totally agree! Awesome attitude from Patrick
Can’t wait for the one after to have three engines
Maybe it will finally be a mini jet boat instead of a micro jet boat lol love these things I hope he builds 100 more
sold
One of the next videos could be
How many jet ski engines does it take to make a pontoon go 60 mph
4 engines is easier to balance, plus two of the engines can be mounted on the outside!
@@georgesmith2431true more is better
I gotta say Grind Hard has to be the best channel on TH-cam… hands down… or up from excitement
Thank you so much!
And you have watched ( rather b welding) ????
As an old jet ski fanatic I’d recommend vacuum testing the engines so you know they don’t leak air making the tuning process a lot easier and not always chasing making them run right.
Yes leaking crank seals can cause a lean condition & burned holes pistons . Check all fuel lines for leaks and those rave valves should be cleaned & adjusted properly. Used to radar run my Mach 1 years ago and that's part of keeping them tuned up and running hard .
a couple days ago i finished bingeing all of the mini boat series and it was my favorite build, so happy theres another
hello my name is William and i love your content and i just wanted to ask if you needed help. id move up there and work for free with room and board. I'm struggling and need a change. I can turn a wrench and im really good with electronics. plus i love dogs and drones, grew up riding a cr80r as my first dirt bike then a cbr600 as my first vehicle. if you would be willing id be seriously willing. again thanks for the content guys
Get this man a cabin 😂
Good luck bro
Pls notice this guy and give him a chance
Everyone like this legends comment!! 🙌🏼
Idk why I read this in a baby voice 😂
Thats a c-130 with a Modular Airborne FireFighting System (MAFFS) used to assist/augment forest fire crews by dispersing phos-chek/water/retardants.
We started a ton of range fires during the summer and they had one stationed at the airbase nearby.
Watching it deploy the entire payload with accuracy is really impressive - you wouldnt think such a massive cargo plane could move that quick or turn as steep and as fast as it does… its a whole different story riding in one when flying in or out of a combat zone!!
its from the ppl that throws cars off the cliff thats near them they were having a show with a bunch of ppl, surprised they dont know about it th-cam.com/video/T8MsMHGVR1U/w-d-xo.html if you click through the video youll see the plane doing low fly bys
Moody afb.
Crew chief 00-04
I just love that nothing is clickbait on the channel, always fulfilling
That’s how we do it man
I binged the entirety of your first mini jet boat series, and I'm super stoked to see what happens with this one.
PORT and LEFT both have 4 letters. That's how I remember. Good stuff guys!
Or you get a star for being right.
thats how i remember too!
Same
Took the words outta my mouth 😂 🤘🤘
Same same
As the drone flew overhead helpless..I recalled a scene from the 5th Element with the monk asking Zorg if he thought his little toys and creations were of any use as Zorg choked on a cherry.😂😂 Love the episode! Great work.
My brother delivered the jet boat to yall. I literally moved the crate around the dock at work haha.
Another week goes by and the fire truck build remains but a dream
Something something electric power wheels tank...
wow, another great build, cant wait to see it finished. Would also like to see more power wheels going around the track you built before it start snowing and maybe some builds around the track to get some racing going on it.
Definitely enjoying the...revised...lineup, guys. Back to the feel of show that got me hooked from bicycle-treehouse-elevators.
(We didn't need yet another channel of keen young blokes with enthusiasm and no clues.)
Looking forward to your future projects.
That looks cool 😅 I would def listen to the song “Dupe - Kontrolla” if I was driving that
Man. The og jet boat was amazing. Definitely your craziest build when it was released. It was a fun series to watch as well
Now you all can race ole' Cleeter. Dude destroyed his MTN Dew jetboat on the rapids, but it looked so worth it. I'm all here for the jetboat content. 👍
So rad hearing about Fireball Tool, since I got hooked with so many of their projects, and now being pretty much every week waiting for your content, it's awesome to see both of you guys crossing paths.
Dude is that the guy from the hummer vids?? Epic! Fits right in, great dynamics 😊
Huge fan, longtime viewer, even live really close to you guys!
With that being said, I do not miss Will as much as I thought I was going to! Not trying to shit on him, but after viewing his new content I feel like your guys style inspires me to get out in the shop and work on my projects
And again, no hate just my opinion
Patrick adds good value around the shop. He seems to have a brain and adds to ideas
Edwin, that was an interesting spill. Looked educational too!! I don't tell you often enough how much your love for Idaho's outdoors shows, even when you only edit.
Remember, it used to be called "Starboard" and "Larboard", "starboard" references the side the boat is steered from, literally came from "steer-board" as it used to be a board lashed to the side to steer from. "Larboard" is the load board side, where you'd load and unload the boat, or now it's just called the port side. Larboard starts with L so that's easy to remember as Left
I go by Port and Left have the same number of letters.
@@franmcgowan4068 i was taught a little saying that always stuck with me "There's no more Red Port Left in the bottle." covers the red/green markers too that way
@@franmcgowan4068same
I remember it by the alphabet. The S for Starboard is closer to R in right than it is to L in left. 😂 mine is clearly more complicated than others.
This is going to be a great time, watching this build and watching it shred on the water for sure
Port is left and starboard is right. Port had 4 letters and Left has 4 letters that’s how I always remembered it.
Port used to be called Larboard which starts with L, also starboard comes from steer-board since you steer from the right side
Least and most left port red right starboard green
I remember the same way
Is there any red port left is a good one to remember
Smart. That's how I learned it too!
Patrick is awesome for hanging around. He brings the level of sketch only someone from NM can bring.
A wise man once said “make sure your jet ski tether is securely attached fellas 🤙” to bad I didn’t listen 🤷
Bro it's in the video😭💀@@TaylorLaing24
Sorry brotha ! I lmfao when the ski said later .
I like how you decided to swim after it. I could see you change your mind about it several times like, “should I? But I can’t swim that fast… But I should at least try. But it’s a jet ski. But I can’t just stay out here in the middle of the lake…”
But you were smart enough to have the vest on, so no harm no foul.
One time I had a tether snap, but I was lucky enough that it turned and came back to me where I could pull the key. I was also lucky because I was in the middle of a big lake with a lot of big boats so it's a good thing I wasn't stranded.
Some Advice on those Rotax's Keep the injection pump! the Rave valve needs the lube, But just toss a little bit of oil the fuel too. And yes thats a WestCoast Head on the one, has interchangeable Domes for Comp, and orings seals that needs to be replaced if you dig into it. Cheers like this one!
Always love watching GrindHardPlumbing videos in a jet ski dirt bike would be super cool and even a jet ski quad runner
A quad would be awesome!
That's what I'm saying It would be super cool because Because you can do a quadrunner half where it's got wheels and it doesn't float anymore or you could do both where it has wheels and can still float and drive in the water.
23:11 Port is left. A old boat guy once said it's easy to remember cause there's never enough port left in the bottle 😂🙋♂️🇦🇺
The mini jet boat needs to be re-wrapped! Excellent video as usual!
As a suggestion, when mounting the engines, use a single jet, with a chain driven drive shaft. The engines could point opposite directions, so the inlets are both on the middle and the exhausts to the outside.
0:50 wish i had a corvette lying around
I've been waiting a few years for someone to do build twin side by side engines for a mini jet boat. If the Offshore big boats can do, so can one using a mini. I picture a little bit bigger mini with Twin supercharged Rotax motors on dual thrust outlets.
YES! GRIND HARD AVAITION! Legal Eagle ultralights with v-twin engines!
I just thought to myself "I wonder if there's anything new Grind Hard Plumbing Co?" and then i just see "18 seconds ago"
Me too but mine was 37 seconds ago
Talk about perfect timing, my right guys.
@GrindHardPlumbingCo7 heck yeah I'm proud he won
I was told to run 2 different jets in the older sleds. Run a little bigger jet on the PTO side. i actually still do that on my older backup sleds
Fireball tool the best. I like when youtuber help each other. Fireball tools seem indestructible. Keep up the good work guys. Greetings from Miami FL
Fireball is so damn good as well. Of COURSE Ethans is also a fan!
Bro i need to see the next part of this show I like to see it go 2 engine bro come on I am a big fan in Belize
Damn, i love this channel!
Glad to see you're so happy about new table, it really ties the room together,
seriously you deserve it.
Much Love
World Peace
I wrote premium on the crate lololol
That's premium
Shame you spelt it wrong
@@Mardy72 he didnt spell “it” wrong
Legendary 😎 lol
@@Mardy72bruh how you gonna misspell something while correcting someone else’s grammar 🤯
That's awesome you got a real runaway on camera, great work!
I'm such a 13 year old.
Sitting here chuckling about homie saying that we really don't know how it runs until it has a load on it.
Shit. Lol.
Love you guys.
and you wont know how much spunk it has until you get it in the water
@@cilli5866 HaHa
FireBall Tool is The Absolute Greatest Company and People!!! You Did Absolutely Amazing On the Buy!!!
Lmao I swear I thought that green gremlin was the evil toe fungus guy from the Lamisil commercials back in the day, either that or the mucinex mucus monster
I'm familiar with fireballtools his tables are awesome so glad to see it on the channel!! You'll need to get one of his vices next.
@23:54 I thought I heard Will for a second 😃
2:00 graphics from the 90s is lit 🔥 ❤❤❤❤❤😊
Is it just me or does Ethan seem like he’s being extra chipper to make up for Wills absence….
We need a GHP Co. B.U.M. Collab tho now
I like this new guy 😊
Like I said last week.... If you need seadoo help I'm your guy. The mpem is bad there was no reason to go into the mag housing...and it looks like you got a crappy sbt rebuilt motor in the one. The modded one in the other hand that pipe is worth 500+, the sponsons are worth 200. Lol and I programmed the key for that replacement box you bought.
That’s a C-130J out of Joint Base Lewis-McChord. The drop zone isn’t too far from the lake. Probably just taking a detour.
Didn’t think I’d say this but this show is definitely more premium without Will. I think it was a good call for him to go on his own to do what he wants, not hearing places you can even walk for the Billionth time each episode is nice. Pat would definitely be a good addition
Bro that looks fun
Thank you man! Glad you enjoyed it
Patrick is a good replacement for Will. Smart, funny and professional. Will can just keep trespassing on private properties, and build ugly machines, while GrindHard builds cool machines on their own property 👍
Harsh dude... #notapremuimcomment
Will is a young buck, making his own way. One has to respect the hustle. You might not like his content, but the kid has talent. Ethan thought him well.
Dayum hating much?
not based comment
I think nokbeen3654 owes the comment section 100 push-ups!😂😂
I’ve been watching fireball tools stuff for years! Super glad you were able to get setup with some of his stuff!
you should style the throttle after a multi-engine airplane throttle, that way you can easily control both at once or have differential thrust for sharper turning. or simply have a right and left hand throttles.
Nice show, I been on that yellow jet ski. Man i miss those days.
At the moment the only youtube channel im looking forward too! Cant wait for new videos guys! You inspired me to keep on going with my own projects that are sitting for way to long.
YES! mini jet boat is one of my favourite builds, this is going to be a monster.
Wauw, seeing this channel for the first time, what a life is this! Really awesome to see.
Greetings from Holland
When you said fab table I was hoping you were going to say you got a “fireball tools”, did not disappoint!
Huge shop full of every tool you could ever need. Ethan is so excited he rips the boat box apart with his bare hands.
I was thrilled to see the fireball table... Those are the best!
Oooooo! Fireball.
Yeah. That's the good stuff! I've been coveting these things for years.
Next giveaway? Fingers crossed!
The best way to remember is [Port] has four letters, as does the word [Left]. Starboard is the Right side.
i haven't even watched this yet, but YOU GUYS. WHAT. THIS IS AND HAS ALWAYS BEEN THE BEST CHANNEL.
Awesome episode ❤
You guys need a pool for testing purposes + dogs can cool off :-P
Digging and concrete ftw
I am super pumped to see this build 👍
3:08 Ethan's and the guys chuckles fit the track that was playing perfectly 👌
Make each steering wheel only work in one direction. Takes two people to get anywhere. Siamese jet boat.
"Grind Hard needs to get into aviation someday" FINALLY!!! YES! I sent you plans for the Budgie, a utility short take off, ultra rugged leisure single seat aircraft designed specifically for your skillset and construction style - build it please!!! I'v said that on literally every video - it's time. FYI that was a USAF C130-J likely doing water drop training
Crazzzyy Idea I just had idk if it is even possible but what if you turbocharged both engines with 1 turbo and you merge both exhausts into the hot side and Y-pipe out of the compressor and then run 2 maps Mabey idk just a crazy thought
Fireball tools is the bomb he makes quality stuff
When the grind hard crate showed up at work I was fan Girling haha
Think steer-board instead of starbaord.. the word derives from ships having a steering board on the right side, therefore they had to dock with the left side to port, so not to wreck the steering board (before rudders where a thing)
Ok, paint me in envy because you got 2 things now that id love to have, a jet stream jet boat and a fireball fab table. The boats are probly the best adult man toys on the market and the table is a fabricators dream.
@16:29 I've got that little green guy on my work bench along with a few other toys my daughter put up there. Never knew what it was from. Thanks!👍
I almost knew when you said I got a new fab table that you got one from Fireball Tool. Those things are so awesome, wish my shop had one. I'm also jealous of the scenery on that lake in Idaho, that is beautiful.
It is so good 🫠
Cletus McFarland has the micro boats also! He has videos of them thrashing those poor things. Awesome. Can't wait to see what you all come up with. Thanks Ray
Wonderful to see Ethan building crazy stuff again!
19:23 turn the hull into a motorcycle or dirt bike. 😅 I would love to see that. I totally wanna do that one day!!!!! Also in winter …. You have to try it after the summer.
787cc engines are a blast
Just make sure to check the rave valves every ride by removing the caps and retaining springs. Then making sure the caps stay tight.
Port and Left have 4 letters. Starboard and right have more letters. That's how you can remember it. :)
What?
Pretty cool that you guys got a Fireball Tools fixture table. I started watching both of your channels about the same time. I'm thinking a collaboration is in order.
I wonder if that silver block is a SBT rebuild. Also make them fixed drive and use independant throttle to steer like a tank jet boat. Then you can skip all the steering stuff
Someone definitely raced that ski. Umi controls, beach house sponsons, west coast head, spec 2 factory pipe, R&D flame arrestors… that engine has so much more power than the other. I’m very interested to see how that affects the ski. I would look into finding another spec 2 pipe, they really wake them up. Rebuild the carbs and ONLY USE OEM MIKUNI kits. Looking forward to this build!
I think we need to see that Jetski carcass on a dirtbike chassis, you can call it the boatercycle! 🤣 I bet it’d be a hoot to ride!
cant wait to see the dirtski
Love waking up and seeing a new grind hard upload!
Hell yeah fireball tool! Have to support local business!
Love watching y’all’s channel. I hope Will is OK. I haven’t seen him in a video in over a month or so. I hope everything is so great love watching y’all build and have a blessed one.
The daily challenges are a must for me they keep the games exciting and up the ante with extra bonuses
I cannot wait to see this boat finished and ripping!!
Ps. I’m sure you already know this.
Propeller = Outdrive
Impeller = Jet Drive