No Start, 2000 Integra gsr B-Series. Troubleshooting step by step!!!!
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2024
- B18c1 all motor honda salvage integra gsr B series crank no start no crank b series Click no start good battery car won't start starter car wont start fix click diy auto repair Salvage integra gsr Honda wont start just clicks hondata hondata s300 2000 acura integra wont start my 2000 acura integra wont start skunk2 honda parts
Click on the link to become a Patreon member and help support the channel and become apart of the JCMOTIVEGARAGE Family, Join the membership with added perks.
/ jcmotivegarage
#acuraintegra #troubleshooting #nostart
Another problem solved by step by step reasoning, good job!
Nicely done. Mine was doing the same thing. I'm thinking might be the starter too. Does oreily charge for checking your starter and how much?
Yes they will check the starter and it’s free to test it
Im getting a p1336 code now. I have a 1999 Acura Integra GS-R Sedan. Where is the crankshaft fluctuation speed sensor?
I don’t understand? So you simply adding a wire thick as original from battery to starter or?
As long as it’s the same size because of the voltage it has to sustain
good job man.
My Dash lights are on when switch on but only click and my radio light blink , integra 2000. New battery
Check your cable to the starter and the negative cable
@@JCMotiveGarage its the clutch switch grommet
No idea what's wrong with mine replaced- ecu, main relay, all grounds, all fuses, battery, starter even bench tested starter to confirm, cleaned ignition contacts, clutch safety switch is bypassed,no crank no start, my crankcase is also flooded with gas. Shut off while driving no idea. Engine still turns by hand. .
Send me a message on Instagram or Facebook, I’ll try to help you out.
distributor rotor
Check the ground on the starter
It wasn’t that