You definitely have a teaching talent (calm demeanor + knowledge). Why? After your video, everything is clear. After the videos of other authors, I cannot say the same. Thank you so much!!!
Well, now we have a good resource of information on Mazatrol programming ! Thanks for the effort, man, so very cool ! Subscribed already ! Thanks again !
Great instruction! Do you know of any videos on a smart 300M control? I've ran qt's quite a bit, but no live tooling programing experience. Say cutting 6 equally spaced slots down a shaft...
Nice thing about Mazak is the programming language remains basically the same as they came out with newer controls. If it works on my T-3 control then it would work on a Smart control.
I’ve never worked with Mazatrol in my life. Watching this tutorial it doesn’t seem to be hard to run a Mazak. But the point is, does this old Mazatrol version look too different than the new ones? When it comes to tools set up or operating, does that change a lot?
The new Mazaks have more features than this old controller but the basic Mazatrol language has remained the same. You describe the tools in the same way. I had an easy learning transition going to the Smooth X control. The biggest difference for me is the touch screen interface on the new controls.
You will need to get a set of metric parameters for your machine. Switching a Mazak from inch to metric requires you to change a TON of parameters. Mazak will only sell you the parameters that were originally loaded on your particular machine via your machine's serial number. This is a very involved process and not something I would recommend.
You definitely have a teaching talent (calm demeanor + knowledge). Why? After your video, everything is clear. After the videos of other authors, I cannot say the same. Thank you so much!!!
Thank you for the compliment!
Well, now we have a good resource of information on Mazatrol programming ! Thanks for the effort, man, so very cool ! Subscribed already ! Thanks again !
Thanks for the positive feedback.
You are very helpful, thank you
Great instruction! Do you know of any videos on a smart 300M control? I've ran qt's quite a bit, but no live tooling programing experience. Say cutting 6 equally spaced slots down a shaft...
Nice thing about Mazak is the programming language remains basically the same as they came out with newer controls. If it works on my T-3 control then it would work on a Smart control.
I’ve never worked with Mazatrol in my life. Watching this tutorial it doesn’t seem to be hard to run a Mazak. But the point is, does this old Mazatrol version look too different than the new ones? When it comes to tools set up or operating, does that change a lot?
The new Mazaks have more features than this old controller but the basic Mazatrol language has remained the same. You describe the tools in the same way. I had an easy learning transition going to the Smooth X control. The biggest difference for me is the touch screen interface on the new controls.
What does width mean on the page with the tool data page?
The tool file page. Sorry
Are you talking about where you would enter the width of a grooving tool perhaps?
@@mazatroltipsandtricks6816 I thought I saw it on your turning tool slot
@@mccheezen20 It means the width of the stick tools. Not an important field.
HOW TO CHANGE MILLIMETER TO INCHES?
This is very difficult to do as there are a bunch of parameters that need to be changed.
Thanks you a lot! You are a good man...
Thanks for the compliment.
What should I do to translate the parameter language will be Turkish
I do not know how to change the language in the machine.
How can I change from inch to metric on a sqt15 m32-3?
You will need to get a set of metric parameters for your machine. Switching a Mazak from inch to metric requires you to change a TON of parameters. Mazak will only sell you the parameters that were originally loaded on your particular machine via your machine's serial number. This is a very involved process and not something I would recommend.
Hi. We have this machine in Spanish. How to swith it to English?
Cam t2
I do not know how to change the language.
@@mazatroltipsandtricks6816 Meanwhile, do you have the Alarm and Parameters List/Description?
@@Serhio_de_Odessa I have not seen anything in the parameters that relates to language change.
@@mazatroltipsandtricks6816 thank you for your consideration
@CencL thx.
Hi,can you share d parameters please
how to change LANGUAGE? BECAUSE WE USE MAZAKTROL QUICK TURN 15 BUT JAPANESE LANGUAGE
Sorry I do not know how to change the language.
Sir.
We want to change the language of machine. In our machine now Jarman language. We want English language. Help us
you philibuster a lot
get to the point haha
Yeah, I guess I do. Lol.
So low , inadequate,,,,,say how you do corections