Junk Wireless Speaker TO Saved Wired Speaker. "Its OK To Try! Its Already Junk Anyway!" Lets Hack IT
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- In this video we take an old wireless sub woofer that is "Trash" with out its counter part transmitter and hack it to have a wired port! If I had to guess there are a lot of other wireless products that could be done the same... so with that said! Don't be afraid to try something. however if you dont have a clue what your doing... be very careful. you could be dealing with high voltage!! disclaimer! Do this at your own risk! I'm not responsible for any things that may happen!.
God Bless
~Russ
![[TH] 2024 PMSL SEA Finals D2 | Fall | ต้องรักษาฟอร์ม อย่ายอมให้ใครแซง](http://i.ytimg.com/vi/x38QsGn7A3M/mqdefault.jpg)
Found one like this at goodwill. Opened it up thinking I could use the amp and sub. The Bluetooth sent me to TH-cam. Thank you for this vid.
You are my hero. I have a Klipsch R10B sound bar that will randomly stop producing sound until turned off and back on, and I have been searching to see if I could make this exact modification. What's crazy is the R10B uses this exact subwoofer, even the plate amp is the exact same on the inside, just rebranded.
I have a r20b same thing. I got it done except for the input. Did you figure it out?
@@rwegmuller Yes I got it to work following this video. Although I ended up just bypassing the plate amp and using an external amp to the sub directly.
IT HAS POTENTIAL!!! Love it. And that Skillet was your test track.
i emFAT'ically agree with Frank, ...
And the guy did well in the initial, detailed solution.
But if you don't [ see ] where the wires end up', then it is of no benefit to learn the starting point'!
Could you post a picture of the board you soldered ypur wired connection to?
dude! finally i found the this video & thank you for taking the time to share your knowledge & insight. i too am a bit of a collector & gatherer of discarded items whether it be the thrift sto, dumpster or side of the road. i am hi-fi audio junkie as well & my arsenal(collection) has several items needing this modification & i am eager make it happen.
recently a rather hi-end piece has come into the mix but it's missing a key component - maybe i could get your thoughts on a mod to get this baby working. once again, thanks for the video!
I have the extra same subwoofer. Where did you connect the input. You should show that part
He connected to ANOLOGUE OUT
Where the audio output u go SO fast cant tell where yo tie in thanks for half a fix
Or, you can do it the easy way:
1- Cut all 7 leads off of the BT header. Recycle said header. You don't need it anymore.
2- Connect V+ STB and Link together. You can solder if you want. I just used heat shrink.
3- Add the connection type of your choice using Out+ as positive and GND as negative pin 3. I used a mono rca header from a Sony sub but anything with +/- leads will do.
4- Tape off the remaining two leads. Double check for any funny business.
5- Test bump and put it back together.
Your welcome. 🤘🏾
dwam82-db Can you help me with this?
Worked great, I just soldered the 3 pins together since the are all next to each other, and removed the unnecessary wires from the terminal. Leaving only the 2 input wires.
@@riadelramahi Attaboy!🙂
@@EduKojak What do you need?
Bro thank you so much, that was much simpler
Finally found a person who get what i want to do! I must have 15 or so subs of various qualities. Some wireless Some wired. Need to narrow it down. Now what to do with all of my orphan single speaker i rescued 🤔
I have to try this with my vizio soundbar . It has an analog out to sub , but no bluetooth pairing capability on this model. I have a vizio wireless sub soon to be wired , thank you for this video
Looking forward to trying this myself on a JBL5.1Bar Subwoofer I found in a local dumpster recently. Of COURSE there was no soundbar with it, or power supply, and I've yet to find anything online for a to use it without the soundbar via Bluetooth😢 so... Next best option is cut out the Bluetooth all together!... and hope jbl didn't find a someway to make it so the subwoofer will only work with the JBL5.1 soundbar via Bluetooth period😂 I'm glad to see a few others doing the same. I hate to see anything go to waste and it's good to see others do to and wish everyone luck on their particular projects!
Did you manage it? I have a jbl sb400 and want to do the same to the sub!
U were absolutely & completely thorough in the explanation & "recipe" for direct connections
{ until } you breezed past the physical ( + ) & ( - ) audio signal connections • i don't see where you landed the red/blk. wires in the circuit path ? :^o
They land on the pins for analog audio coming from the wireless module. Just look up the data sheet for the module you have and then you can find the pins... ~Russ
SKILLET!!!!!!!!!!!!!!!!!!!!!!!!!!!!! You ever listened to ‘Disciple?’
Oh yeah... How about the band spoken? One of my favorite ones from the time!! Cheers ~Russ
@@RWGresearch yes sir!!! I love their song ‘Through it All.’
What about ‘Pillar?’
The 2 big tabs on the module is theconnectin lololol
What white wires go where I got the v+ stb and link together and where does the red black go hard to see thanks
I love my Audio too :)
Me three!
I bought a wireless Samsung harmon kardon subwoofer and I want to try this but I’m afraid lol this gives me hope but I almost want to wait till someone else does it first cuz it’s part of a very expensive setup so I know it’ll sound great with my Bose solo 15 I bought at a thrift store I’m only in it for 55$ for both so not bad but I’m a scaredy-cat smh 65$ but I guess it’s not doing much but holding my mattress up at this point
great sub woofer . real nice project to hack a speaker and make it work with an audio jack. it should be a powered sub
Hi. Could this work with jbl SW10 subwoofer? I assume the wiring would be different...
I have a Samsung subwoofer but I'm trying to do the same thing with you right now LOL
I know it's been a year but did you ever do it? I have a Samsung I'm tryina do it with right now
Hi, Richard.
I'm trying to do this to a Klipsch r20b and it's exactly like this. I can't see where you put your inputs
exactly why im here😊
The other option is completely bypass the amp and use it as a passive subwoofer on your own amplifier
Super ideas
Hello, I have a JBL 2.1 wireless subwoofer, I bought the whole system brand new but the bar was stolen at the airport, funny story yes but it’s true, I’d like to do what you’ve done here, connect it wired but still powered.
do you leave the grounds connected and cut the mode and out + wires?
excellent
My sony soundbar went out. The subwoofer is fine. How can I like it with my new sony sounbar that has no way to connect to it. My woofer is bluetooth mt sound bar is ct-s100f sont and my old woofer is sa-wct260h. This soundbar has no way to adjust the treble or bass. That is crazy to me. Please help me. My.old soundbar is sony sa-ct260h. Someone told me it had a fuse on inside. Next to the power transformer or something. There is nothing o line to tell me how to fix it. You can plug it it and no lights or power comes on at all
i need to do this same thing . I actually need help doing it.
I want to do this with a jbl 3.1 wireless subwoofer any tips
nice one bro I will try that on an active sony HT-C290 subwoofer I bought from scraps but currently I'm trying to hack into an active JVC -HT D437H soundbar's wireless module (came without the active subwoofer ). All I get is a distorted creepy sound. any help?
Tengo un subwufer Samsung wireless Bluetooth pero no tengo la barra de sonido como puedo inyectar audio y encenderlo
Friend, are you still out there?
What happened to the Stan Meyers research?
I just picked up a Samsung woofer that works so I’m going to attempt after watching I may need help but no one is really doing this
good job A+++
Cool
Did you know energy is made by klipsch
All good. No great. But I hear a blown speaker now that you successfully connected the mysterious audio wires.
I think it's now the time to go with my plane of recycling and rip it all off to get a good set of magnets from the large sub's speakers and surely that will work perfectly in terms of attracting iron. I'm sure son will agree with me too and probably like the plane even better. A really working magnet vs a muffling speaker. But then have fun and cheers.
Sounds like sam doesn't understand it it a subwoofer not a reg speaker.
Yeah wtf is he talking about! 😆
היי
יש לי jbl sb 400 sub
בלוטוס
אני ישלח לך תמונות של הלוח
תעזור לי ?
👊👀👍
product vids th-cam.com/video/NOuue3vZI9w/w-d-xo.html
Plz pin out wisp 40A
Waste of time.
Just wire it directly to the speakers.
Hey man excellent video. I am literally doing the exact same thing so i am in your shoes now. Can you please guide me with how i can do it the same way as u did? i have a Sony SA-WCT 180 and the drawing can be found on google. It's just that i am not understanding how to do the exact steps as you did. If you don't mind, i can send you my email so you can give me some pointers, thank you.
i emFAT'ically agree with Frank, ...
And the guy did well in the initial, detailed solution.
But if you don't [ see ] where the wires end up', then it is of no benefit to learn the starting point'!