"Butcher block" is just glued, no dowels. Drywall screws will only snap off in hardwood. In 25 years of remodeling, drywall screws are just for drywall. I only use a Torx drive screw and 99% of the time it's GRK brand, a little more expensive but approved for ALL woods.
@@kswaynes7569 good evening Wayne. Ya, kinda figured they were just glued. Never really had any trouble with sheetrock screws in most things.. they don't like good dry Doug Fir sometimes though. Ideally, square drive stainless.. they don't rust out in 10 or 20 years.. Torx are good too. Thank you!!
@@brycewiborg8095 just another day in paradise... Lol.. You must have had a hard day, napping in the recliner. I could do that about now too.. but I'll wait, if I nap now, I'll be up at 2 or 3 am.. to early to go out and make noise.. 4:30-5 is a better time. Thank you for Bryce!!
They are spraying fungicide on the corn tonight with a helicopter. It is plenty dark here when they started. Had to reload multiple times. The north side of my 2nd biggest field has all 60 foot light poles up on the bank. The pilot did fine. I was a little bit concerned at first.
great find on the butcher block, butcher block is usually just glued. Be careful out in that heat, Its been terrible. Thursday we are finally suppose to drop into the low to mid 80's
My desk at the house we just sold was made from the same countertop and kitchen cabinets, solid as a rock. Jackie wants butcher block in the new house. Take care and have a blessed rest of the weekend Ed.
@@RandWFarmstead-TonyWalsh that poor countertop was solid, but the Formica was coming off.. Hopefully we can figure out how to make the actuators work, so it can be counter high, or raised up for cutting things up.. I can't bend over that long.. Take care and have a blessed Sunday my friend!
Good evening Ed. We all have days like that, busy all day but not really much done. I just got done in the field for the day. Rolled some swaths together and then baled. It went OK. You folks have a good night.
@@thecamocowboyoutdoors5693 good evening Garry. Ya, busy, busy, busy.. and not much to show for it🙄 Good to hear you are getting some hay made!! You all have a good night!!
Saphie and Ruby Lou 😍😍😍......Didn't make it last night, my eyes got too heavy....We're going to finish up square baling today, couldn't do it yesterday, had some light rain showers. Thanks Ed, have a great Sunday.
Always funny, how cows can hide somewhere even though they're so big, lol 👀😂. Tomorrow we will move to the new demolition. Well, we will see🤔😁. Have a nice Sunday Ed!!
Howdy Ed 🍻👍. Got 200 bales made this afternoon. Looks wet the next couple days, guess we’ll get 200 bales or so washed in the swath again. One more day I’d have been caught up. 🤷♂️🤔. Dang weather guessers got me again. 🥴🤣👍🍻🥃🥃🥃
Good evening Ed and gang. Just getting back from loading a load of milk for a buddy He had a wedding 2 hours away and got back just about the time I was getting back He is going to deliver it tonight.
yeah my old girls by the house do that all the time, they find the one spot of the paddock you cant see from the house n all hide in there n get me panicking
"Butcher block" is just glued, no dowels. Drywall screws will only snap off in hardwood. In 25 years of remodeling, drywall screws are just for drywall. I only use a Torx drive screw and 99% of the time it's GRK brand, a little more expensive but approved for ALL woods.
@@kswaynes7569 good evening Wayne.
Ya, kinda figured they were just glued.
Never really had any trouble with sheetrock screws in most things.. they don't like good dry Doug Fir sometimes though. Ideally, square drive stainless.. they don't rust out in 10 or 20 years..
Torx are good too.
Thank you!!
@@GosselinFarmsEdGosselinSquare drive 👍
As Saturdays go it's not bad.
I had dozed in the recliner when I got the notification. Thank you Ed.
@@brycewiborg8095 just another day in paradise... Lol..
You must have had a hard day, napping in the recliner. I could do that about now too.. but I'll wait, if I nap now, I'll be up at 2 or 3 am.. to early to go out and make noise.. 4:30-5 is a better time.
Thank you for Bryce!!
G'day Bryce
@@Murphyslawfarm G'day Murphy.
They are spraying fungicide on the corn tonight with a helicopter.
It is plenty dark here when they started.
Had to reload multiple times.
The north side of my 2nd biggest field has all 60 foot light poles up on the bank.
The pilot did fine.
I was a little bit concerned at first.
@@tractortalkwithgary1271 crazy... But gotta do it when they can.
G'day Gary
Good Evening Ed👍
Good evening Kev.
@@Kevscancave good evening Kev 👍😁
@@brycewiborg8095Good Evening Bryce👍
Evening Kev!
G'day Kev
Happy Saturday Ed!
Happy Saturday Matt!
G'day Matt
@@Murphyslawfarm G'day Murph!
great find on the butcher block, butcher block is usually just glued. Be careful out in that heat, Its been terrible. Thursday we are finally suppose to drop into the low to mid 80's
@@MySliceOfHeavenoutdoors thank you Joey!!
You are going to love the 80s!! We've dropped down to there a couple of times.. stay cool!!
Good evening Ed. That's a pretty fancy project. 👍
@@farawayfarm2520 good evening Will.. sometimes I make nice things...
I don't always ruin nice things..lol
Thank you!
My desk at the house we just sold was made from the same countertop and kitchen cabinets, solid as a rock. Jackie wants butcher block in the new house. Take care and have a blessed rest of the weekend Ed.
@@RandWFarmstead-TonyWalsh that poor countertop was solid, but the Formica was coming off..
Hopefully we can figure out how to make the actuators work, so it can be counter high, or raised up for cutting things up.. I can't bend over that long..
Take care and have a blessed Sunday my friend!
Good evening😎
@@NickLosli good evening Nick 👍😎
G'day Nick
Good evening Ed.
We all have days like that, busy all day but not really much done.
I just got done in the field for the day. Rolled some swaths together and then baled. It went OK.
You folks have a good night.
@@thecamocowboyoutdoors5693 good evening Garry.
Ya, busy, busy, busy.. and not much to show for it🙄
Good to hear you are getting some hay made!!
You all have a good night!!
Saphie and Ruby Lou 😍😍😍......Didn't make it last night, my eyes got too heavy....We're going to finish up square baling today, couldn't do it yesterday, had some light rain showers. Thanks Ed, have a great Sunday.
@@brenterickson1695 good morning Brent ☕☕☕
I know the feeling.. hopefully you finish up today!
Thank you! Have a great Sunday!
Always funny, how cows can hide somewhere even though they're so big, lol 👀😂. Tomorrow we will move to the new demolition. Well, we will see🤔😁. Have a nice Sunday Ed!!
@@InGodWeTrust816 sneaky buggers!!
Hopefully you can moved and work!
Thank you Al!! Have a great Sunday evening!!
Good evening Ed, raining again and the prior was down to 4 deg C, i guess 39 F
@@jankotze1959 good morning Jan ☕☕☕
You will have warmer, dryer weather soon.. and we will have the wet and cold too soon.. stay dry and warm!
Good evening
@@ronphillips1437 good evening sir 🥃🥃🍻
G'day Ron 🍻 🍻 🍻 🍻 🍻 🍻 🍻 🍻
Howdy Ed 🍻👍. Got 200 bales made this afternoon. Looks wet the next couple days, guess we’ll get 200 bales or so washed in the swath again. One more day I’d have been caught up. 🤷♂️🤔. Dang weather guessers got me again. 🥴🤣👍🍻🥃🥃🥃
@@chadtosh6831 howdy Chad 🥃🥃🍻
Nice 👍
Freaking technology just makes them worse.. unless it's the Guberment messing with mother nature 🤬
Good evening Ed.
@@brycewiborg8095 good evening Bryce.
Bryce!
@mattthescrapwhisperer Hey Matt.
Good evening Ed, hope you had a great day.
@@southtexashay777 good evening Louie. It was a little change of pace today.. hopefully get something done tomorrow!
Have a great Sunday!
G'day buddy and Mom from Sunday 😂
@@Murphyslawfarm G'DAY MATE 👍😁🥃🥃🍻
Good evening Ed and gang.
Just getting back from loading a load of milk for a buddy
He had a wedding 2 hours away and got back just about the time I was getting back
He is going to deliver it tonight.
@@tractortalkwithgary1271 good evening Gary.
Sounds like a big day!
yeah my old girls by the house do that all the time, they find the one spot of the paddock you cant see from the house n all hide in there n get me panicking
@@piperdoug428 makes a guy want to send up a drone.. go searching for them...lol
Good morning Ed
@@dougkubash8673 good morning Doug ☕☕☕
Good evening Ed
@@richardwilkens4577 good evening Richard