13:00 the A/B mode allows you to toggle between the transmitter (TX) and 1/4” (IN) inputs by pressing the foot switch. Both TX and IN will show the tuner while passing signal through to the output jack. Great review!
Great review. The User Guide that came with my system doesnt really explain a lot except not to eat the battery, so I appreciate the video actually explaining the features. Thanks again
Hey man nice Video!👍 Just want to add that the A/B Mode is for switching between the wired Input and the wireless signal, if you want to plug in two Guitars at once, so you don't have to remove the Bodypack nor the guitar cable.👌
Great and helpful information on how to set up and use,as just bought one and watched a few vids but they never explained as well as you have,about the dual bands and how to set that option up Thanks 🤘
Great system. We love them. The whole band uses them. Try using it with the Radial Engineering Dragster, a very affordable and compact variable resistor system that lets your pickups see a load closer to a cable and amp, rather than just the transmitter. It make the wireless sound more like you are hardwired. .Adjusts the load on magnetic pickup for a natural sound, It improves the sound of any wireless system
@@MartinKlajasGuitarchannel Thanks for the response, after looking a little further I am reading that the first number is group and the second number is channel 2.4band, if it is a letter it is 5.8band. Very good video sir!
You may have gone over it. I cant find it anywhere. I just got this today. Im charging it now. The website says it takes 3 hours. I plugged it in, and it has a flashing red light. Its in the off position now. I took it out and it had a solid green light but halfway charged. It worked fine. My question is will it eventually go to a green light when its charging and should the switch stay in the off position? Does the flashing red light mean its charging? Sorry if this sounds dumb.
When the light is constantly flashing red, turn it off, push and hold the link button next to the charge port and turn pack on while holding the button. Then push link button on the receiver to re-link the units. That should sort it if you haven't already 👍
Unfortunately I don’t own any guitars with active pickups so I’m not sure. However I would be surprised if it didn’t work. Please contact Shure for confirmation before buying…
Great and helpful information on how to set up and use,as just bought one and watched a few vids but they never explained as well as you have,about the dual bands and how to set that option up Thanks 🤘
Great and helpful information on how to set up and use,as just bought one and watched a few vids but they never explained as well as you have,about the dual bands and how to set that option up Thanks 🤘
This is a master class for all TH-cam creators of how to explain/demonstrate a product. 👌👌
Thanks man! Really appreciate that… 🙏🏼😃
13:00 the A/B mode allows you to toggle between the transmitter (TX) and 1/4” (IN) inputs by pressing the foot switch. Both TX and IN will show the tuner while passing signal through to the output jack. Great review!
Great review. The User Guide that came with my system doesnt really explain a lot except not to eat the battery, so I appreciate the video actually explaining the features. Thanks again
@@SnakeBitBob1982 thanks man! Really appreciate that… 🙏🏼😃
amazing review! I ordered one, before I saw this, so this video gave me some reassurance😅
Thanks man! Glad to be of service... :-)
Hey man nice Video!👍
Just want to add that the A/B Mode is for switching between the wired Input and the wireless signal, if you want to plug in two Guitars at once, so you don't have to remove the Bodypack nor the guitar cable.👌
Great and helpful information on how to set up and use,as just bought one and watched a few vids but they never explained as well as you have,about the dual bands and how to set that option up Thanks 🤘
Thanks man! Really appreciate that… 🙏🏼😃
Great video guide. Just picked one up and lucked out on finding your video. Thanks!
Thanks man! 🙏🏼😃
Great Video brother! Just got mine today this was spot on. Thanks so much!
Thanks man! 🙏🏼😃 glad you enjoyed it…
Great review of this product.
Great system. We love them. The whole band uses them.
Try using it with the Radial Engineering Dragster, a very affordable and compact variable resistor system that lets your pickups see a load closer to a cable and amp, rather than just the transmitter. It make the wireless sound more like you are hardwired. .Adjusts the load on magnetic pickup for a natural sound, It improves the sound of any wireless system
Great Video! If the receiver displays '1C' for example what does the letter represent? Should it not be a channel number only?
I think the letter represents the groupe and the nummer represents the channel. Or maybe it’s the other way around…
@@MartinKlajasGuitarchannel Thanks for the response, after looking a little further I am reading that the first number is group and the second number is channel 2.4band, if it is a letter it is 5.8band. Very good video sir!
Ahh yes! That’s right!
Thank you very much! Really appreciate that… 🙏🏼😃
Any ideas on why my transmitter shows that it’s connected but it’s not receiving any audio? I am stumped 😭
Best video for tutorial on TH-cam;the rest are just opinions 👌
Thanks man! 🙏🏼😃
Very thorough review.
These newest versions are way better!
Great explanatory video
Thanks man… 🙏🏼😃
Thank you!!! Great video!
Is this compatible with a transducer pickup for mandolin...?
I'm sorry but I simply don't know. But don't hesitate to contact Shure. I'm sure they will be happy to answer your question...
@@MartinKlajasGuitarchannel thanks a lot
Awesome video! What guitar cable are you using? I like those the plugs on this cable. Thanks
Thanks man! 🙏🏼😃
The cables are from a company called Rattlesnake Cables…
Do the channels have different sound? Or does it not matter? Thx for your answer ! 🙂
There’s no difference in sound on any of the channels. The system just finds the best channel for you… 😃
You may have gone over it. I cant find it anywhere. I just got this today. Im charging it now. The website says it takes 3 hours. I plugged it in, and it has a flashing red light. Its in the off position now. I took it out and it had a solid green light but halfway charged. It worked fine.
My question is will it eventually go to a green light when its charging and should the switch stay in the off position? Does the flashing red light mean its charging? Sorry if this sounds dumb.
When the light is constantly flashing red, turn it off, push and hold the link button next to the charge port and turn pack on while holding the button. Then push link button on the receiver to re-link the units. That should sort it if you haven't already 👍
Any issues using guitar/basses with active electronics?
Unfortunately I don’t own any guitars with active pickups so I’m not sure. However I would be surprised if it didn’t work.
Please contact Shure for confirmation before buying…
Hi, sound doesn’t change the tone? Crystal clear same like a cable?
There is no change in tone to my ears. I have tested it with a 3m cable and it was exactly the same…
@@MartinKlajasGuitarchannel in clean tone and drive tone?
@BagusWibisono didn’t matter…
@@MartinKlajasGuitarchannel thank you martin
@BagusWibisono you are very welcome… 😃
It is good gear video 🎸
Thanks man… 🙏🏼😃
Great and helpful information on how to set up and use,as just bought one and watched a few vids but they never explained as well as you have,about the dual bands and how to set that option up Thanks 🤘
how do you mount it to pedalboard?
I use M3 Dual Lock tape on the board and regular Velcro on the pedals…
Great and helpful information on how to set up and use,as just bought one and watched a few vids but they never explained as well as you have,about the dual bands and how to set that option up Thanks 🤘
Thank you for the kind words. Really appreciate that… 🙏🏼😃