ฝัง
- เผยแพร่เมื่อ 6 มิ.ย. 2019
- Upgrade and modify your Duke 200, 250 and 390 headlight to LED, for best night visibility in the city and on highway's.
Original NightEye led installation for my Duke 200.
Headlight Modification
For bikes like Bajaj NS 200, DUKE 250, NS 160.
Simple and easy installation.
Best Headlight for sports bikes.
You can buy this product here 👉🏼 amzn.to/38R3P2v - ยานยนต์และพาหนะ
Will it fit for duke 125?
The high beam on these bulbs are not as good as compare to a halogen bulb's high and low difference. But, yes, the low beam is great, mainly because it uses 2 of the diodes as compared to high beam that adds in just one more remaining diode.
Yes bro.same problem i m facing.the high sucks. stock ligh high beam is so good
@@thedoperider98 Yes. But we did around 400kms of night touring with this bulb recently. The high was only used to flash the cars in front of us. The low beam only was enough to ride at night. Both highway and cities.
I put a fan type led like this in my duke bike. But now the water is trapped inside the headlight bottom side of the park-light. Where did it come from? Did the rubber come through the side of the dust cover?
What to do next to prevent water from entering it 🤔
I was facing this issue when I give my bike for pressure washing. I just removed the light assembly and drained the water from it.
Later I made sure that I always kept a plastic cover in the gap of the speedo so that water won’t get inside it. That’s the only solution for this.
Did you cut the dust cap?
And will water or dust accumulate inside, during the rains or a regular wash after cutting the dust cap?
Yes the dust cap has to be cut
@@applefans100 but wont water get inside through the cut?
@@AkashDas-xe5ln I'm also thinking about this
@@AkashDas-xe5ln Not water but yes after wash, moisture does go inside. But it goes away once you park the bike in the sun or use the headlight for some time. But yes, to answer your question, moisture does get in at times
I think you installed the high beam led facing downward... that's y it is throwing light right next to the bike when high beam turned on
Also, I don't understand, why it comes in pair? Unlike RC, duke only need 1. What to do with the other bulb?
Bro the placement of the bulb is perfect. The reason you are seeing the high beem falling down is because of the camera. You can’t capture the light as humans see on camera at night. You go out at night and try it out yourself.
2. Those bulbs are made for cars so they come in pair. Nighteye won’t sell single bulb for bikes. Hope you get it
Highbeam toh yhi gir gyi 😂😂😂
Abee bhai 🤣🤣🤣😂😂
how good or bad is the original halogen setup? and how many watts is it stock?
i plan to buy the duke this month and i like yellow light
no22sill
To be honest the stock halogen is excellent on 200 duke as compared to 250 Duke. There is no problem using the stock one it lights up the road very well.
@@applefans100 thanks man
Which nighteye to buy for Duke 390?
Please help
If you have the previous generation duke 390 with halogen lights you can buy the same H4 led as used in the video above ✌🏼
@@applefans100 Thanks buddy
Bro after using the nighteye on ur ktm duke 200 for almost 1 year is there the reflector or any thing got damaged bro please reply me ur are the only one youtube who was replaying us please reply me I need to install this
T.k Enosh No buddy it won’t cause any problems to the reflector. Just be careful while cutting the dust cap. Cut it perfectly so that only the silver part of the light comes out. Rest all will be fine.
@@applefans100 hey tq buddy for replying me I bought it today from local shop now I'm installing it bro tq
T.k Enosh great bud! You will love the light for sure
Will it fit for duke 250
Vernon Williams ya it will fit
So how did u put again the rubber cover?
I cut the top part of rubber and used it
does the duke 200 have DC Electricals
no22sill yes bikes have DC current as of my knowledge
Bro won't the fan in the bulb interfere with the rubber protection?
You have to remove the Dust Cap completely, then only you can install the led.
Check out Jeet Bhaskar's video for installation. Perfectly installed without removing the entire cover. I did the same. Its a clean install
I tried C4 , but the fan casing interfere with the backside of the headlight which is attached to handle cuz of which u will get very tighter fitment and c4 was not at all good . No proper throw at all
It will fit for duke 125 2019 model
Yes it works with 125 duke
which specs to buy for duke 250??
huna khawlhring
get the same H4 fit for the duke 250 also. As duke 200 and 250 have the same headlight socket
How to instal to parklight LED ? your not add the video
Beard Duker The parking light replacement is easy just remove the 4 screws and pull the plug out which gives you access to the stock bulb.
Tejas Dm Thank you
Bro where I can buy this ? Plz suggest which to buy for Pulsar RS 200 , H4 or H11 ?
Am also from Bangalore
Regards
Roshan
Roshan V Chacko I guess it’s H11 for RS. just check your user manual for confirmation
Tejas Dm Ya it’s H11 suggest me where I can buy this ?
Bro which night eye fitted for my rc 200 2016 model??? Pls suggest
Adi you have to buy the H 11 socket type for the RC 200’s projector headlights
@@applefans100 can i fitted h4 night eye led headlight??
No no you can’t fit that to RC
So h9 or h11 which type??? pls reply bro
Only H 11 is compatible so buy the H 11
Bro have u cutted the headlight rubber or not bro reply me because I need to install it in my duke 200 please reply me
Yes, buddy, I did cut the rubber dust cap. But only at the top part where the indent is there. Just make sure that you cut the so that the heat sync of the light has some air and space to breath.
bro i need yellow led can i get yellow one reply
You can get the yellow ones. But it doesn’t make much difference from the Halogen
@@applefans100 power it consumes
Is any switch is necessary for this led
Saurabh Upadhyay. No you don’t need any switch, it’s just plug and play
@@applefans100 it's great.
Bro that means if i want to replace the halogen with nighteye led in my bs6 duke 250 then no need to any switch, only i will change the bulb. Naa
Yes just replace the stock bulb and you are good to go.
@@applefans100 Thanks bhai..
For your expansive time for replying me😊🙏
I’m here to help you guys.
Hey bro your duke is bs4 or bs3
Saurabh Upadhyay it’s the BS4 duke 200
@@applefans100 so is switch not necessary?
It just works like a normal halogen light. You don’t need to do anything to it
@@applefans100 okay thanks bro now I'm understand, recently i have changed my bs4 activa bulb with nighteye led then mechenic was saying that a switch will be necessary for this modification because led runs on direct current (battery). So i have this doubt in my mind
Price?
The pair of light costs around 2000 rs
Bro tum jo link deyai yaha se tho fake waLa aagya
Sorry to hear that! If it’s fake return the product immediately bro.
Hi .i completely choosed to modifiy by adding a lens .see the result here th-cam.com/video/Pax-OF7XWuQ/w-d-xo.html
Saw your installation,it was excellent.
Bro you have got fake headlights. 😂
Afroze ehan and how is that ?