Thanks for the comment. I did insulate quite extensively. However, because it is a double storey building the hot air goes up to the top floor. This system helps to force the hot air down to thd bottom floor.
I've been using Brown's Gas / Hydroxy Gas for about 3 weeks now. Used it for the first hour to treat my eyes - pumped the gas into safety goggles - and haze from my cataracts disappeared immediately and my vision is continuing to get better (nobody believes me). Overall feeling of well-being and less inflammation of joints is noticed as well. It's the best - at home - personal health treatment I've ever invested in. There are a lot of HHO Welders on Amazon that generate Brown's Gas, but in my opinion, they aren't safe for health until completely retrofitted with many modifications. The shell of these is what is used to make the AC50 for home use. Making one or buying one is the best way to go. Keep posting updates please. I like your machine too.
Thank you for the testimony James ! We also have been experiencing amazing results. Will definitely try the goggles! I am planning on building a dedicated machine using only glass and silicone tubing. My current machine id mostly of PVC. However I am also getting good results and no after taste. My Lye mixture is also very weak, only 1600 PPm where the AC has a stronger mixture in its electrolyser. This is possible because of the high power and amount of plates in my machine. Will keep you posted:-)
@@thequixotryworkshop2424 Awesome! I guess you're already well aware of the possible combustion that can occur and damage a glass container can do, but I see the usefulness of glass. That idea sounds like it would be a cleaner machine. I've changed the fluid in my AC50 after 190 hours and saved it to let the debris settle and mixed a new solution because I didn't want to wait overnight for the old solution to clarify. I think George Wiseman said that he separated, weighed, tested and measured the debris - discovered that it consists of the same elements from his plates - and checked his equipment for any loss of material, but couldn't find any change. He concluded that the electrolyzer caused a transmutation to occur in the solution. He said if this is true, then it's a hint at a new "fringe" science. I haven't experimented with the frequency generator on my AC50 yet. Just keeping it at 432hz. I need to learn more.
@@shepatown A combustion inside a electrolyser happened to me before. There was a bad connection and electrical spark occurred. It only resulted in a popping sound. As long as the electrolyser is filled with fluid it can not explode. Furthermore, I am planning on using safety glass, and have the whole machine covered. Thanks for the concerns anyway:-)
@@shepatown my elecrolyte have been staying clear for years now. No brown gunk. My plates are all 316 stainlesssteel, and there is 110 plates. So I suppose that the galvanic corrosion is spread out over all the plates. One day if my machine stops to work, I would love to cut it open to see the plates condition.
@@thequixotryworkshop2424 That's a real positive result. I don't believe that the transmutation is very much. I suspect it is mostly corrosion. I've experienced that corrosion firsthand when making colloidal silver. The rods deteriorate to slivers.
@user-ju2kr7pv6v The schematics are available for $25 . It is a PDF document with instructions, pictures and a set of lasercut ( for the e plates) and other DXF files for plastic parts. Please contact me via email ( christoff@quixotry.co.za ) if you are interested.
![[UNCUT] “บอสณวัฒน์” ลากไส้!! ใครหนุนหลัง "แม่ตั๊ก ป๋าเบียร์" I คนดังนั่งเคลียร์ I 30 ก.ย. 67](http://i.ytimg.com/vi/QlD7mU2KKRk/mqdefault.jpg)
Super. outstanding job,see you later~
Thank you! Cheers!
GOOD WORK CHRISTOF
Thanks for the comment. I did insulate quite extensively. However, because it is a double storey building the hot air goes up to the top floor. This system helps to force the hot air down to thd bottom floor.
Thank you for sharing your experiences!
My pleasure! Thanks for the comment:-)
I've been using Brown's Gas / Hydroxy Gas for about 3 weeks now. Used it for the first hour to treat my eyes - pumped the gas into safety goggles - and haze from my cataracts disappeared immediately and my vision is continuing to get better (nobody believes me). Overall feeling of well-being and less inflammation of joints is noticed as well. It's the best - at home - personal health treatment I've ever invested in. There are a lot of HHO Welders on Amazon that generate Brown's Gas, but in my opinion, they aren't safe for health until completely retrofitted with many modifications. The shell of these is what is used to make the AC50 for home use. Making one or buying one is the best way to go. Keep posting updates please. I like your machine too.
Thank you for the testimony James !
We also have been experiencing amazing results. Will definitely try the goggles! I am planning on building a dedicated machine using only glass and silicone tubing. My current machine id mostly of PVC. However I am also getting good results and no after taste. My Lye mixture is also very weak, only 1600 PPm where the AC has a stronger mixture in its electrolyser.
This is possible because of the high power and amount of plates in my machine. Will keep you posted:-)
@@thequixotryworkshop2424 Awesome! I guess you're already well aware of the possible combustion that can occur and damage a glass
container can do, but I see the usefulness of glass. That idea sounds like it would be a cleaner machine.
I've changed the fluid in my AC50 after 190 hours and saved it to let the debris settle and mixed a new solution because I didn't want to wait overnight for the old solution to clarify. I think George Wiseman said that he separated, weighed, tested and measured the debris - discovered that it consists of the same elements from his plates - and checked his equipment for any loss of material, but couldn't find any change. He concluded that the electrolyzer caused a transmutation to occur in the solution. He said if this is true, then it's a hint at a new "fringe" science.
I haven't experimented with the frequency generator on my AC50 yet. Just keeping it at 432hz. I need to learn more.
@@shepatown A combustion inside a electrolyser happened to me before. There was a bad connection and electrical spark occurred. It only resulted in a popping sound. As long as the electrolyser is filled with fluid it can not explode. Furthermore, I am planning on using safety glass, and have the whole machine covered.
Thanks for the concerns anyway:-)
@@shepatown my elecrolyte have been staying clear for years now. No brown gunk. My plates are all 316 stainlesssteel, and there is 110 plates. So I suppose that the galvanic corrosion is spread out over all the plates. One day if my machine stops to work, I would love to cut it open to see the plates condition.
@@thequixotryworkshop2424 That's a real positive result. I don't believe that the transmutation is very much. I suspect it is mostly corrosion. I've experienced that corrosion firsthand when making colloidal silver. The rods deteriorate to slivers.
Thank you for this interesting video ❤ Now I know even more about the amazing HHO things 😉😘
thanks for sharing i would like to build one would you be able to share share schematic to build one iwould be willing topay
Sure. Please send me an e-mail christoff@quixotry.co.za
@user-ju2kr7pv6v The schematics are available for $25 . It is a PDF document with instructions, pictures and a set of lasercut ( for the e plates) and other DXF files for plastic parts.
Please contact me via email ( christoff@quixotry.co.za ) if you are interested.
Does CDS made from MMS conflict with browns gas? It oxidates and the gas is anti oxident thank you