For those that just want to know what directions, To lower point of impack rotate the sight post counterclockwise. To raise point of impact rotate clockwise. To move windage to the left move the sight post right and to move windage to the right move the front sight post to the left.
This was very helpful. I just purchased my first AK (Zastava) and fired it at the range. It was on for windage but I just adjusted the rear sight until I was hitting POA/POI at 50 yards. I knew this wasn’t the right way to do it but now I’m comfortable with the process. Thanks for the concise instructions and thank you for your service.
@@Raiderlsu good choice. Especially since Serbia has halted all arms exports as of today June 14, 2023. Whether it is temporary or permanent is yet to be seen.
Old Romanian wasr 10 hit 1" obove 50 yards. Hit anything in close range to 250 yards. AR-15 17 twist you want a dead center. 22mag up to 75 yards straight line shot. Growing up in wood thought not to miss food you shoot at.
Karl! When you do an AK video it gives me a warm feeling way down in the cockles of my heart. Maybe below the cockles. Maybe in the sub-cockle area, maybe in the kidney, maybe in the liver, maybe even in the colon... we don't know.
Thank you for this video. I’m actually headed to the range today to zero an AK. This cleared up a lot of confusion at what yardage to zero and at what setting.
Great vid. 25 yards on 200 meter setting is pretty standard and works great. Thanks for the spent case field expediant front sight tool tip. Good stuff.
This is a bit off topic, but I wanted to mention that your drill of 1" at 3 yds holding the gun with thumb and trigger finger, has helped me with my trigger control, more any drill I have ever tried. When ever I get off, I go back to this simple little drill and I'm back on track. thank you my friend, you are making me a better shooter.
Acronym time: F.O.R.S. (Front, Opposite....Rear, Same). Which ever way you move the FRONT sights, the impact will move the OPPOSITE direction. Which ever way you move the REAR sights, the impact will move in that SAME direction.
@@bigDICKplayer.. You proved me correct in your own comment. What part of Front, Opposite did you miss in my comment? You must be that one person holding everyone at the 25m Zeroing Range until after chow is closed and everyone is done sorting brass and waiting to get back to the barracks.
Karl Thanks for the class. I really appreciate getting information on current platforms and tactical set ups. I was trained with the 1903-A3, M1 rifle ( which is my favorite) M1 carbine, BAR during my time in the Navy. When I went into the Army I carried the M16A1, which I really liked from a carrying it and accuracy stand point, but prefer the hitting power of the M1s M2 cartridge, especially at distance.please continue bringing valuable information to the military and firearms community.
Your the man karl owning up to ur mistake cause I don't think many people would of noticed it. I tried to tell you ur spinning it the wrong way but you didn't listen. Poor chad
Glad i found this video. Just followed these instructions to zero my polytec legend milled receiver AK, it’s blow dead on out to 300. That’s as far as we can shoot on the range. I used mid quality ammo to kind of give me a middle ground for cheap wolf and hornady black. But what a difference a good zero makes
Don't bother with the Tapco tool they are trash, mine bent while adjusting front sight. The Magna-Matic front sight tool will last you a lifetime. AK Operators Union Store has them for $30 plus bucks.
The magnamatic sight too is a very robust and effective sight tool I've bought. Also the absolute easiest way to remember which was the the front post goes whether up or down, left or right is to chase the post to your point of impact on the target. So if you bullet is hitting high and to the left your front post needs to go up and to the left too.
Thank you for this video. I see soo many videos on AR 15. Don't get me wrong great rifle but I've always been the different guy so I picked up two AK and I'm learning as much as I can so I can use my tools correctly and accurately.
Thanks for a simple method. I did buy a sight tool. I do have the rifle. So I am learning how to operate it. The AK is different. But accurate enough for a battle rifle.
In mother Russia there is no point in sighting in rifle for Ruzzian cannon fodder because NLAW, Javelin, bayraktar or M777 will turn you into a pink mist.
I picked up my Zpap M70 on Tuesday. I plan on taking her out during my lunch break to 0. Thanks for this training instruction. I'm sure it will help a lot.
@@xx-knight-xx2119 Glad you got it. Serbia just halted the exports of all arms today. It’s only for 30 days but I suspect it will be longer and the democrats making it permanent.
Tapco is trash too. One of their cast AK triggers split in two on one of my Veprs. Contacted them. Promised replacement. Never could get them to follow through. But did introduce me to ALG triggers. Best for AKs. Good video.
Guys, if you haven't tried out a product from Kalash USA yet, you absolutely have to. Doesn't matter if it's the AK or the Vityaz. Either option will serve you well. They're extremely well made pieces of kit and deserve every plug possible.
I'd like to hear more about Karl's & Chad's thoughts on that KUSA AK. AKOU did a brief accuracy test, and it was shooting below 2 MOA with typical steel case Russian ammo.
@@JA-nt9em I'm not surprised. When I say I am shocked at the tightness of the tolerances and precision of the machining on the KP9 I'm not even kidding. You know you have a premium AK in your hands.
Brownells sells an AK-47 sight adjustment tool , called the Mag- Na- Matic, it is the absolute best tool for adjusting the sights on an AK-47. It is forged and hardened stainless steel and very reasonable priced.
Thanks for your very nice info-clip and no, I 'm not trying to be a smartass but I do prefer Gerber over Leatherman use wise and eBay over Amazon price wise. Take care and shoot safe!
At this 25yd distance zero, would you keep your rear sight at two when hitting steel at 50-100yds? Or move it all the back? How high will it hit at 50, 75 & 100 yds? Anybody have ballistic results on this?
With a 25 yard zero, left on the 200 meter setting, you will hit about 7 inches high at 100 yards. The rest I don't know. This zero setup is for putting holes in bodies without changing your point of aim. Not precise but very good for combat.
The Magna-Matic AKFST is a fantatic tool. The only problem I encountered is my FSB is canted a lot. The elevation part of the tool will not fit when the windage is properly adjusted. If your FSB is canted, adjust it for elevation then windage.
Whichever drunk romanian dude built my wasr did a good job zeroing it bc I can hit steel out to 300 no problem. However, the front sight post is practically touching the left protective leaf in order for it to do that 😄
Before you start adjusting the sight, you need to learn how to hold the weapon correctly and aim correctly. Bullets can lie to the right or left of the aiming point due to the collapse of the weapon to the right or left of the vertical axis. You can check the correctness by the "horns" protecting the front sight. If they are parallel to the horizon, and the bullets fall to the right or left, then this is a problem with the sight. Otherwise it's your mistake. Above or below the bullets will lie if the rear sight and front sight are not aligned correctly. Therefore, do not rush into the settings if you have not mastered the correct technique of holding and aiming
Goto AK Operators Union and Rob Ski has a simple, Did I say Simple? Yes simple way to zero your ak first at 10 yards, then 25 and Shows you, how to adjust your front sight and rear sight. You will be surprised how simple it is. Your 25 zero will be good at 100, 200, and even 300yards. Rob shows this in a form that you will appreciate. Not taking anything away from what Tactical Rifleman is showing. There is always another option to learn from and AKOU is a goto.
I've had luck with this AK zero target that's set at 14 meters. All instructions are on the target. I can't get direct links but google will find it for you using ak47-zero-target ..they work well. thanks for your video. Also, the Magna-Matic is a more durable and professional AK sight adjustment tool.
I just buy old parts kit builds. My last was a type 3 1960 polish milled receiver build with a chf barrel. Just shot it at 200 yards last weekend, with the barrel being non chrome lined it was very consistent.
For those that just want to know what directions, To lower point of impack rotate the sight post counterclockwise. To raise point of impact rotate clockwise. To move windage to the left move the sight post right and to move windage to the right move the front sight post to the left.
Thank you so much. I got confused when he mentioned that there were incorrect adjustments for the second shot group.
Just remember FORS, front opposite, rear same…. Wait, they’re both on the front with an AK. ☹️😂
This was very helpful. I just purchased my first AK (Zastava) and fired it at the range. It was on for windage but I just adjusted the rear sight until I was hitting POA/POI at 50 yards. I knew this wasn’t the right way to do it but now I’m comfortable with the process. Thanks for the concise instructions and thank you for your service.
@@Raiderlsu good choice. Especially since Serbia has halted all arms exports as of today June 14, 2023. Whether it is temporary or permanent is yet to be seen.
Old Romanian wasr 10 hit 1" obove 50 yards. Hit anything in close range to 250 yards. AR-15 17 twist you want a dead center. 22mag up to 75 yards straight line shot. Growing up in wood thought not to miss food you shoot at.
We always would stick the barrel in between tank tracks and bend the barrel to change impact.
🤣
Sounds legit....😂
Thats some hard core shit, motivator.
@Daniel Lindquist mostly around trees. Till the Lorax came around with quad nods.
Sounds like you and your boys took a beating from that barrel
The rule of FORS is the best way for me to remember which way to move which sight.
Front: Opposite
Rear: Same
FORS
That guy behind the trigger has very DANGEROUS Body language....no fidgeting no scratches no moving readjusting...well done SIR....SEND IT
I like the increase in the audio of this video. Much easier for old guy's ears to hear. Thanks.
Karl! When you do an AK video it gives me a warm feeling way down in the cockles of my heart. Maybe below the cockles. Maybe in the sub-cockle area, maybe in the kidney, maybe in the liver, maybe even in the colon... we don't know.
Spleen
Lmfao
Thank you for this video. I’m actually headed to the range today to zero an AK. This cleared up a lot of confusion at what yardage to zero and at what setting.
The way Chad stares down that rifle without any body movement... yer that's one scary dood you don't want to mess with.
He’s asleep 😂
Great vid. 25 yards on 200 meter setting is pretty standard and works great. Thanks for the spent case field expediant front sight tool tip. Good stuff.
How does this zero work with shooting with the rifle held sideways above my head? I find that my groups at 100 yards aren't matching up.
You must improve your faith in Allah Akbar then your bullets will be guided by the prophet Momo himself.
If shooting right handed, you need to aim up and left.
@@jacksonsinclair2615 "you must improve your faith in "god is the greatest"..."
@@KCCCX Maybe he meant hail mary XD. Yes I know its a prayer not mary.
@jacksonsinclair2615 that's awesome, prophet momo
This is a bit off topic, but I wanted to mention that your drill of 1" at 3 yds holding the gun with thumb and trigger finger, has helped me with my trigger control, more any drill I have ever tried. When ever I get off, I go back to this simple little drill and I'm back on track. thank you my friend, you are making me a better shooter.
Awesome. Glad it helped. TR
Zeroed my AK last month. Shot at a beer can at 50y, dust plooms missed 2 feet right. Now I just aim 2 feet left.
Six o clock hold or dead center a better way for ak 47
Gotta move front sight 2-3 mm left
Bullseye!
Acronym time:
F.O.R.S. (Front, Opposite....Rear, Same). Which ever way you move the FRONT sights, the impact will move the OPPOSITE direction. Which ever way you move the REAR sights, the impact will move in that SAME direction.
its opposite for an ak u move the front sight to the right to move impact to left nice try buddy
@@bigDICKplayer.. You proved me correct in your own comment. What part of Front, Opposite did you miss in my comment? You must be that one person holding everyone at the 25m Zeroing Range until after chow is closed and everyone is done sorting brass and waiting to get back to the barracks.
@@andyprairiedog Nothing like a good ole troll slapping to make my night, good on ya Andy!
@@ScubaOz HOT CHOW! HOT CHOW!!
@@bigDICKplayer.. GEEZ Wally
knowing that 25 yard zeros with 200 meter setting sounds like some forbidden 18Bravo knowledge lol. Amazing. Thanks SgtMJ
Not really anyone thats played with a ballistic calculator and an AK knows that.
Given that 200 meters is 218 yards I feel like I don’t know what day it is
Karl Thanks for the class. I really appreciate getting information on current platforms and tactical set ups. I was trained with the 1903-A3, M1 rifle ( which is my favorite) M1 carbine, BAR during my time in the Navy. When I went into the Army I carried the M16A1, which I really liked from a carrying it and accuracy stand point, but prefer the hitting power of the M1s M2 cartridge, especially at distance.please continue bringing valuable information to the military and firearms community.
Thanks Ron
What is this we speak of ???
Your the man karl owning up to ur mistake cause I don't think many people would of noticed it. I tried to tell you ur spinning it the wrong way but you didn't listen. Poor chad
Extremely informative. You have an excellent way of putting things in perspective. Thanks for sharing your experience
Nice i got couple aks but didn't know the proper zero technique...now i do!
Thanks brother 🙏
Thanks for a great video...always trying to become a better marksman and these videos help!
Glad i found this video. Just followed these instructions to zero my polytec legend milled receiver AK, it’s blow dead on out to 300. That’s as far as we can shoot on the range. I used mid quality ammo to kind of give me a middle ground for cheap wolf and hornady black. But what a difference a good zero makes
Got my 1st AK. Figuring out it's capabilities, this is one of them. Thanks for the Tapco tool info. Godspeed bro!
Don't bother with the Tapco tool they are trash, mine bent while adjusting front sight.
The Magna-Matic front sight tool will last you a lifetime. AK Operators Union Store has them for $30 plus bucks.
I second that. Magma-Magic worth every penny.
I even had to use the Ak, today was a good day...😎
Ohhhhiii 🙌🏻
Not what Cube said 🙃😒
The magnamatic sight too is a very robust and effective sight tool I've bought. Also the absolute easiest way to remember which was the the front post goes whether up or down, left or right is to chase the post to your point of impact on the target. So if you bullet is hitting high and to the left your front post needs to go up and to the left too.
Thank you for this video. I see soo many videos on AR 15. Don't get me wrong great rifle but I've always been the different guy so I picked up two AK and I'm learning as much as I can so I can use my tools correctly and accurately.
Glad to help
Really good information I will never use! I see you are still alive...that is good news!
Thanks for a simple method. I did buy a sight tool. I do have the rifle. So I am learning how to operate it.
The AK is different. But accurate enough for a battle rifle.
In mother Russia you no zero AK, AK zero you. Then Sergeant Major Karl calls you a dumb ass, and you don't get selected.
Or even worse, you get to be the next point man with the ANA
In mother Russia there is no point in sighting in rifle for Ruzzian cannon fodder because NLAW, Javelin, bayraktar or M777 will turn you into a pink mist.
I picked up my Zpap M70 on Tuesday. I plan on taking her out during my lunch break to 0. Thanks for this training instruction. I'm sure it will help a lot.
Glad to help
How'd it go? I'm getting my zpap tomorrow
@@xx-knight-xx2119 Glad you got it. Serbia just halted the exports of all arms today. It’s only for 30 days but I suspect it will be longer and the democrats making it permanent.
Hope you feel better Karl!
I hope that too.
Did he catch the vid?
Get you some ivermectin karl, the crap works dont let then fool you..
This is very useful stuff for all the new AK 47 owners in America. Great stuff , thanks
Thanks for watching, TR
FYI you can get an rpk rear sight that does have marked windage adjustments, theyre starting to get a bit rarer though
I suggest the Magna-Matic Defense Front Sight Adjustment Tool AK-47. IMO it is inexpensive and American-made.
Chad I heard you say "one more?" and it still makes me laugh months later.
5+1
I'm headed to give it a try. A true marksman uses open sights! Thanks for the video!
This instruction is extremely relevant in light of current events......
I just bought this exact rifle. Thanks man. Well done.
Great video on the AK rifle. I am going to take my K103 back to the range and try this method to increase the accuracy of the rifle. Thank You!
Tapco is trash too. One of their cast AK triggers split in two on one of my Veprs. Contacted them. Promised replacement. Never could get them to follow through. But did introduce me to ALG triggers. Best for AKs.
Good video.
Thanks for sharing, TR
Ordered one from midway many years ago, it was broken in half new in box.
This guy has explained zeroing an ak better than I have seen anyone on youtube. This is a must video. I was skeptical at first. Great training.
Thanks for watching, TR
Very nice job on this video! Thank you for posting!!
Thanks for watching!
Soviets zero at 300 m distance rob ski from AKOU did a great video about this method
Guys, if you haven't tried out a product from Kalash USA yet, you absolutely have to. Doesn't matter if it's the AK or the Vityaz. Either option will serve you well. They're extremely well made pieces of kit and deserve every plug possible.
I'd like to hear more about Karl's & Chad's thoughts on that KUSA AK. AKOU did a brief accuracy test, and it was shooting below 2 MOA with typical steel case Russian ammo.
@@JA-nt9em I'm not surprised. When I say I am shocked at the tightness of the tolerances and precision of the machining on the KP9 I'm not even kidding. You know you have a premium AK in your hands.
What about the PSA AK103, or GF5?
@georgewashington7312 those aren't a true ak100 pattern, just an ak with a shorter barrel. Unless you don't care and just want aesthetic.
Good honest video. I was actually thinking, show doing it wrong as a teaching point but you were a head of me 😎
Keeping you guys in our prayers!!
Christopher Walking gives the best AK zero instructions, hands down. Thanks dad. You’re the best!
Great videos, glad I found your channel. BTW, My Dad was also Retired SF SGM, Vietnam era Mateo "ACE" Bello A-109. Take care!
Thanks, you too!
Son got me an AK for Christmas and I have been wondering how to zero. Thanks, now to the range.
Awesome, easy to follow video!
Am I correct to assume the same procedure is used to zero a SKS?
Thanks. Been wanting to know that for GP.
Pretty simple explanation and demo, thanks I'll be using it!
Leave it to an 18D to turn the sight in the wrong direction. 😎 You need an 18B.
But seriously, nice shooting!
Awesome video Komrade Karl!
Thank you for teaching us how to zero our AK’s
Our pleasure!
Great video. Thanks, it worked exactly the way you said it would.
Thanks for the video I'm a definitely take this information an I'm will be using this method ,thank you .
Glad it was helpful! Thanks for watching
Excellent video and thank you for the tips.
Brownells sells an AK-47 sight adjustment tool , called the Mag- Na- Matic, it is the absolute best tool for adjusting the sights on an AK-47. It is forged and hardened stainless steel and very reasonable priced.
Alan, thanks for sharing. There are lots of cheap versions out there. TR
Looking good guys!
FORS , Front opposite Rear same. Still remember it from hunter Education class 40 years ago.
He's called Mikhail Kalashnikov. And Arsenal Inc. you have there in USA is great company with Bulgarian AK license and bulgarian made frame
Thanks for your very nice info-clip and no, I 'm not trying to be a smartass but I
do prefer Gerber over Leatherman use wise and eBay over Amazon price wise.
Take care and shoot safe!
Darn good stuff.
I'll keep my AR, but that AK does look sexy though. I hope your feeling better Karl. Stay in the fight....
What’s with the lack of humor prep? Cmon man
Thank you so much for this video....couldn't find the tapco it's been discontinued. Wentwith a magna-matic instead.
Here in the uk...we zero our Ak bb guns at 15yards...:)
thanks for the extra info Karl..:)
N x
Great video Karl thank you
Great content. Clear and easy explanation.
Glad it was helpful!
At this 25yd distance zero, would you keep your rear sight at two when hitting steel at 50-100yds? Or move it all the back? How high will it hit at 50, 75 & 100 yds? Anybody have ballistic results on this?
With a 25 yard zero, left on the 200 meter setting, you will hit about 7 inches high at 100 yards. The rest I don't know. This zero setup is for putting holes in bodies without changing your point of aim. Not precise but very good for combat.
@@Hercules1-v9m u have to move it to one for 100 n 50, the letter at the bottis the bz
if you want a bomb proof AK sight tool get the one made by magna matic its USA made and nearly indestructible
The Magna-Matic AKFST is a fantatic tool. The only problem I encountered is my FSB is canted a lot. The elevation part of the tool will not fit when the windage is properly adjusted. If your FSB is canted, adjust it for elevation then windage.
Whichever drunk romanian dude built my wasr did a good job zeroing it bc I can hit steel out to 300 no problem. However, the front sight post is practically touching the left protective leaf in order for it to do that 😄
Well apparently he built a bunch of them
Best AK zero video to date. Thanks
Before you start adjusting the sight, you need to learn how to hold the weapon correctly and aim correctly. Bullets can lie to the right or left of the aiming point due to the collapse of the weapon to the right or left of the vertical axis. You can check the correctness by the "horns" protecting the front sight. If they are parallel to the horizon, and the bullets fall to the right or left, then this is a problem with the sight. Otherwise it's your mistake. Above or below the bullets will lie if the rear sight and front sight are not aligned correctly. Therefore, do not rush into the settings if you have not mastered the correct technique of holding and aiming
The pinched case wonderful how many times I’ve tried to get my little pliers in there and scraped off the color.
Hey Karl, you gotta do a zeroing episode for 300 Blk for supers and subs.
Agreed!👍
Great video, but it would be nice to have close ups so you can see where to put the adjusting tool.
Explained well for average Joe which is best I'd bet for 90% of your viewers. Thanks.
Glad you think so!
SEMPER FI brother. Great video.
Goto AK Operators Union and Rob Ski has a simple, Did I say Simple? Yes simple way to zero your ak first at 10 yards, then 25 and Shows you, how to adjust your front sight and rear sight. You will be surprised how simple it is. Your 25 zero will be good at 100, 200, and even 300yards. Rob shows this in a form that you will appreciate. Not taking anything away from what Tactical Rifleman is showing. There is always another option to learn from and AKOU is a goto.
AOK with the AK
Thanks for the vid. Peace
Thanks for imparting some wisdom on us!
Thanks for the video.
You are welcome!
Good info. Thanks for sharing 👍
Awesome advice
Glad it was helpful!
Grateful for the video and hip pocket schooling. Be Blessed and Stay Dangerous
Great video on zeroing the AK honestly.
Great down to earth info. This is why I look for S.F. Trainers. Real World.
Thanks for watching, TR
Love you Karl, keep it up!!!
Mikhail Kakashnikov. The name is similar to Micheal, pronounced mick-hail or somtimes mick-high-eel depending on demographic or preference.
Gonna try it with the rear sight at two thanks.
Great info for sure! Thanks!
Good stuff Karl, than you.
Thanks for watching, TR
I've had luck with this AK zero target that's set at 14 meters. All instructions are on the target.
I can't get direct links but google will find it for you using ak47-zero-target ..they work well.
thanks for your video. Also, the Magna-Matic is a more durable and professional AK sight adjustment tool.
Thanks for sharing
I just buy old parts kit builds. My last was a type 3 1960 polish milled receiver build with a chf barrel. Just shot it at 200 yards last weekend, with the barrel being non chrome lined it was very consistent.
Good explanation.
Thanks Karl!!! Looking forward to giving this a go…got any spare ammo???
Never enough
Thank you Karl and Chad. Looks like the sight on my 98k
8:00 "those are bigger holes than my little 5.56 gun, huh?"
You'd be right. It's an AK-47 my friend 👑💯
AR hole 🤏
AK hole 🫶
At 100 yards you should be 6" down the bullseye. And that will help you shoot up to 300 yards without moving the right sight.
Awesome information!
Good Video!