Thank you for sharing these techniques and tips on lifting 1/64 diecast cars! Great tip on straightening the paperclip wire. It would be neat to see this with the suspension springs and colored covers to make them look real.
*Given the size relative to actual coils on a lifted truck, I think pen springs would be a great representation. I would look for those pens companies use to advertise. The cheapest, most mass-produced ones you can find. Nice and thin springs.*
Your how to videos are absolutely magnificent they only hail in comparison to your talent! Please keep it up as all of us in the diecast Community certainly appreciate what you bring to the table.
For a bit of realism you can cover your drop down wires with ballpoint pen Springs to look like actual suspension Springs. Just subscribed love watching a good Craftsman.
Thank you so much! I just took an old Ford panel van and turn it into a monster truck! I tried using the spring mechanism that you showed in the tutorial, but I was having a really hard time getting into work. It was just too stiff. So instead I took a single paper clip boil it in the center, and then used it as a single spring. It was much softer! Thank you so much again for the video man!
Trucks with the front jacked up and the bed low looks stupid no matter what state you're in. Trust me every time we see one we all laugh and make fun of it. But I guess some people can only afford to lift half their truck.
Hey baremetalHW I've been watching your videos for about 3 weeks now, and I've become quite amazed at what you do, I myself am a younger HW collector, and has recently found a 50 Years Impala tampo error! its crooked! anyways I love your content and have started to custom myself! I also especially love your redline Restorations
I like being creative, recently had an interest in watching TH-cam videos, the video is interesting, its actually a working suspension and is easy to do. Thank you for the video
Great job on the geometry and set up of this suspension lift. And something I just noticed because I just learned this week on a trip to the scrap yard, you are displaying your cars on a hard drive disk. .....I grabbed a stack of them because they were shiny. Lol.
This channel is amazing. You are amazing. You are doing things I wished I could do when I was little, but forgot as I grew up. You are living da dream, man!
Dooope, used to have a 73 datsun 620, best first car ever. Sadly sold out a few months ago, good little trucks though. Million good memories in that thing
Dude, u are insane and love your work ❗I'm a car modeler and some of my builds according to others, are off of the hook. I come up with some of my wild builds in the weirdest places. Isn't funny how you can be at a party or with a bunch of friends or even driving and not paying any attention what's so ever, cause your thoughts on how to make it work go thru your mind 😂 Nice work man 😍
I lifted one of these trucks. I use the S10 Blazer with the football on the side. The chrome grill fit good in the front. I had to sand the bottom of the floorboard and the top of the base to get an even fit. Also the side of the base so the fit up inside the truck. If it really good between the rivets with the little bit of drilling out the hole. I wish there was some way to leave pictures and these TH-cam comment sections so that you could see it, it turned out really nice.
Fantastic video, i have tried so many methods and failed but this one is genius and easy to master after a couple of tries, thank you for sharing this method, George
Thanks for the video, I have made my first lifted car with working suspension based on this design and it works great! It's a HW Porsche 356A. Keep up the good work.
I totally love this idea man. I would love to try this with the dragster bug. The red one or blue one. I’m going to a flea market soon and hope to do this with some oldies. Thanks for the idea! Love ur vids.
Great, yet another extra step for me to obsess over. I guess I'm heading out to grab a box of paper clips. I wish I never saw this. I'll never be able to do it the way I've been doing it without thinking "there's a way better way to do this, you know about suspension now..." I love slash hate you for this lol
Very creative awesome video working suspension totally killer and the ending results were perfect movable arms shocks it was nice it was like it had a full suspension setup just with paper clips thumbs-up👌👌👌👌👌
Your video made my LUV project look better then what I was doing. My first try made for a neat 50th anne ranchero w/ purple lift kit. And 2nd try a cool 35 ford truck. Thanks.
Ok so I had to give this a try and while my bends aren't as clean and sharp as yours, you did make it a breeze to follow along. Thanks for sharing this method. The Datsun 620 and the 49 F1 you lifted both look great! I wanted to try a 2015 Volkswagen Caddy pickup but I only had one of each of that first release colors.. may have to find another in orange just to lift. Another Great how-to
My real issue is getting my paperclips nice and straight. I tried to use a scrap piece of 1x4 and it sorta worked but I am sure the piece of steel works better and If I had a decent drill or better yet a drill press then I would make a steel "straightener". I already see requests for more lifted vehicles, perhaps you can mix the next suspension/lift job with a madmax twist ;)
Thanks for the setup i had put it on a truck with a lift so there's was more steps for me but I managed to put better lookin suspension on it in the end that actually works
I've seen a lot of your videos and I absolutely love all the cool stuff you do, this has to be one of my favorites so far, that is such a cool idea!!!!
Another informative and entertaining video. I would encourage you to check out the jewelry making department in a craft store like Michael's or Hobby Lobby. The various tools used for wire work would be perfect for the type of modifications you do.
7:38 curve the wires away from the car body and they "hook" in better it will also guarantee a better hold if its bent and imo just looks stable in comparison to this. you could also bend it around completely but that is some extra work right there
How far you bend the V would be caster adjustment on a real car. Neat suspension idea, kind of a modified leaf spring set up. I was thinking the caster changing under load would be weird, but it really isn't. Looks great.
I love this guy, he's letting kids know squated trucks are bad
You have literally become the Michaelangelo of custom hot wheels.
Thank you for sharing these techniques and tips on lifting 1/64 diecast cars! Great tip on straightening the paperclip wire. It would be neat to see this with the suspension springs and colored covers to make them look real.
You could use springs from a pen
The wire straighter literally blew my mind. Like how did i not think of that?
idk man
Great job ...I wonder if a spring from a ball point pen would fit on the upright part of the clip making it look like shocks ?
Justin Clark probably will look a bit oversized on these types of cars. but it is doable in terms of possibility.
Jörgen Börg yeah your right mate ....keep these videos coming enjoy them
I think you could have easily wound some red or blue coated wire around the paperclip to make shocks.
I feel the pen spring idea would work, might have to see which pens have a smaller spring, I’m gonna try this.
*Given the size relative to actual coils on a lifted truck, I think pen springs would be a great representation. I would look for those pens companies use to advertise. The cheapest, most mass-produced ones you can find. Nice and thin springs.*
Your how to videos are absolutely magnificent they only hail in comparison to your talent! Please keep it up as all of us in the diecast Community certainly appreciate what you bring to the table.
MY MAAANNNN😂😂 He really just said to not squat it😂, this is already my fav yt
For a bit of realism you can cover your drop down wires with ballpoint pen Springs to look like actual suspension Springs. Just subscribed love watching a good Craftsman.
Thank you so much! I just took an old Ford panel van and turn it into a monster truck! I tried using the spring mechanism that you showed in the tutorial, but I was having a really hard time getting into work. It was just too stiff. So instead I took a single paper clip boil it in the center, and then used it as a single spring. It was much softer! Thank you so much again for the video man!
I love 3am car restorations!
DisllexiaReuls BMHW gonna rock ya!
ikr? this one's clever as hell, too. I love it.
Me too
Currently at my night job. 3:19 am watching this lol
6am
This is, by far, the craziest thing I've ever seen in my life, regarding car miniatures. And, also, the coolest idea.
Congratulations, sir.
"You don't want the truck to look like the empty bed is weighing it down"
My man, you have never been to North Carolina, then
Lol...
Trucks with the front jacked up and the bed low looks stupid no matter what state you're in. Trust me every time we see one we all laugh and make fun of it. But I guess some people can only afford to lift half their truck.
that's the Florida squat
Gunner Ginn (
I was thinking the same thing LOL
nice tip on the piece of steel with a small hole and drill for straightening metal wire!
Man, how do you not fall asleep doing this. Watching this is so relaxing...
aaaand Hot Wheels should hire you to design some models for them.
Excellent tutorial. I had started bending paperclips to raise a 83 Silverado. Your method fixed a dead end I ran into, thank you.👍👍
Clever straightening technique. Absolutely brilliant paperclip suspension!!
Hey baremetalHW I've been watching your videos for about 3 weeks now, and I've become quite amazed at what you do, I myself am a younger HW collector, and has recently found a 50 Years Impala tampo error! its crooked! anyways I love your content and have started to custom myself! I also especially love your redline Restorations
This was exactly what my son needed he loves making custom cars and this video helped him so much! Thank you
I never knew staples could be used this creatively. And it seems to work pretty well. Thanks for showing this method.
That truck is lifted, bare your so gifted, I like the way you got that truck so high.
one of the best videos I have ever seen. The idea of using the pins and using it efficiently is what I liked the most.
I like being creative, recently had an interest in watching TH-cam videos, the video is interesting, its actually a working suspension and is easy to do. Thank you for the video
Great job on the geometry and set up of this suspension lift. And something I just noticed because I just learned this week on a trip to the scrap yard, you are displaying your cars on a hard drive disk. .....I grabbed a stack of them because they were shiny. Lol.
"Hello everyone and welcome back" Such beautiful words to hear xx
I typically don't care for lifted trucks, but that looks really good!
This channel is amazing. You are amazing. You are doing things I wished I could do when I was little, but forgot as I grew up. You are living da dream, man!
I have already done something like that twice when I was 13-14... good times!!
I tried this.....and needles the say I failed Miserably 😂 this guy is a boss at custom hot wheels!
Just caught your suspension upgrade..all I can say is AWESOME! I enjoy catchinng your videos..great job!!
SOOO HELPFUL!!! I'm currently using this method to lift a fully custom car I'm building. Thanks man!!!
Dooope, used to have a 73 datsun 620, best first car ever. Sadly sold out a few months ago, good little trucks though. Million good memories in that thing
Dude, u are insane and love your work ❗I'm a car modeler and some of my builds according to others, are off of the hook. I come up with some of my wild builds in the weirdest places. Isn't funny how you can be at a party or with a bunch of friends or even driving and not paying any attention what's so ever, cause your thoughts on how to make it work go thru your mind 😂 Nice work man 😍
than u so much bud !!
Saw this 5 years ago and just did it.. worked out great.
You make it look so easy.............but you're a real crafsman! New sub.
Super cool louge😊
That is the most clever build that I have ever seen...Well done!
I didn't know I needed this truck project. Yet, you impressed me.
that is genious. so simple with basic tools and yet has a nice look. only need some extra addons to look like it's reallife lifted😀
Right? You can paint the suspension black or whatever and it will look awesome.
Börk
Wow, i never thought of this technique to bend symmetrical. Thanks. Nice work. Really cool technique.
Really cool design. Not only does it work but it looks correct to real life lift kits. Would like to see this used on a Mad Max sometime.
I lifted one of these trucks. I use the S10 Blazer with the football on the side. The chrome grill fit good in the front. I had to sand the bottom of the floorboard and the top of the base to get an even fit. Also the side of the base so the fit up inside the truck. If it really good between the rivets with the little bit of drilling out the hole. I wish there was some way to leave pictures and these TH-cam comment sections so that you could see it, it turned out really nice.
2am and binging on HotWheels restorations! God I love youtube!
That’s a great customizing trick. I might try this with colored paper clips. It would look like the suspension is powder coated. Chrome is cool too.
Your handy work is Awesome! You make it look professional and super easy. I know when I try it tomorrow imma have a battle on my hands.😅
Fantastic video, i have tried so many methods and failed but this one is genius and easy to master after a couple of tries, thank you for sharing this method, George
Thanks for the video, I have made my first lifted car with working suspension based on this design and it works great! It's a HW Porsche 356A. Keep up the good work.
"In essence, the axles will *spring* to life", oh you!
Super cool video, sir. That is about the most simple explanation and demonstration of a 4 link suspension lift.
2:05 that was so cool
Hol' up-
I cant believe this is a thing and I am watching it. Better than the crap on tv.
Dude I knew you were skilled but this a whole different level! Great job!
That was marvellous! Pure knowledge and experience! Thank you! The so tiny suspension that actually works - AWESOME! Definitely want to try it.
Pretty fun project. I lifted a VW bug using your method … LOL.
Dual rear exaust would have made it perfect! Love your collection
Well I know what I'm doing to my Nissan Skyline R34 GTR today. Love the video.
Why would you lift a gtr
idontlikecops1 why not? I want a post apocoliptic styled R34.
@@idontlikecops1 no it's not, it's different and cool.
Jake's Short Films fuck no
@@idontlikecops1 you must really hate uniqueness
WOW!!! We love this one!
I totally love this idea man. I would love to try this with the dragster bug. The red one or blue one. I’m going to a flea market soon and hope to do this with some oldies. Thanks for the idea! Love ur vids.
I am Alex we need oh my girl. Girl group
I am Alex I
I am Alex I love hunting for older cars at flea markets and thrift stores!
Reimagined Hot Wheels me too!
Don't oldies are rare
Great, yet another extra step for me to obsess over. I guess I'm heading out to grab a box of paper clips. I wish I never saw this. I'll never be able to do it the way I've been doing it without thinking "there's a way better way to do this, you know about suspension now..." I love slash hate you for this lol
Amazing. Those Datsun trucks were a favorite of my grandad.
best technique I've seen so far
Man that is sweet...I just bought the car culture land rover defender 110 hard top i'm giving that sucker a lift for my friend for christmas.
Best video to watch while high
Same. Lol.
Very creative awesome video working suspension totally killer and the ending results were perfect movable arms shocks it was nice it was like it had a full suspension setup just with paper clips thumbs-up👌👌👌👌👌
You missed the most important part. The ladder the get in the truck lol. Awesome video
Could be made out of wire as well
Classy and simple. Thank you again for another stellar video
Now that's pure genius
Wow! Simply amazed! Very neat and cheap way to make a lifted hot wheels
just changing the wheels for me is enough maybe some extra parts awesome job 💙
I'm gonna say I think that was pretty slick work. I need a toy and some paper clips.....Did not see that coming! HA
Your video made my LUV project look better then what I was doing. My first try made for a neat 50th anne ranchero w/ purple lift kit. And 2nd try a cool 35 ford truck. Thanks.
Ok so I had to give this a try and while my bends aren't as clean and sharp as yours, you did make it a breeze to follow along. Thanks for sharing this method. The Datsun 620 and the 49 F1 you lifted both look great! I wanted to try a 2015 Volkswagen Caddy pickup but I only had one of each of that first release colors.. may have to find another in orange just to lift. Another Great how-to
Thanks Dave glad you gave it a shot!
My real issue is getting my paperclips nice and straight. I tried to use a scrap piece of 1x4 and it sorta worked but I am sure the piece of steel works better and If I had a decent drill or better yet a drill press then I would make a steel "straightener". I already see requests for more lifted vehicles, perhaps you can mix the next suspension/lift job with a madmax twist ;)
By far one of your best videos brother.
So simple,
Yet so amazing 👌🏻👌🏻👌🏻
Thanks for the setup i had put it on a truck with a lift so there's was more steps for me but I managed to put better lookin suspension on it in the end that actually works
This is just the video I was looking for. Will try it myself. Thanks
I've seen a lot of your videos and I absolutely love all the cool stuff you do, this has to be one of my favorites so far, that is such a cool idea!!!!
Another informative and entertaining video.
I would encourage you to check out the jewelry making department in a craft store like Michael's or Hobby Lobby. The various tools used for wire work would be perfect for the type of modifications you do.
Dude what a mechanism! think I will give it a go
Really liked this way of lifting.
I used to use paper clips and small rubber bands but this looks much better!
If you haven’t already could you show how to do this on a bigger model like a 1:43? Great job 👏🏻
This is nicely done, I have a truck that’s perfect to try this out on ASAP
What an amazing presentation dude
Here's a question: Have you ever considered making customs to sell? Because some of your customs would be worth buying.
I sell pictures of my privates online. I make quite a bit of money off of it too.
Yeah we always want to laugh
Oooooh! Ouch.
@@noveske.2236 and you get space to make new models
It was really a pleasure to watch this. 👍🏾
Your videos are so awesome and weirdly satisfying
Man thats clever! Im going to do this to an old hot wheels chevy Silverado im going to restore! Awesome thanks for the tip!
wow amazing video ans the lift job is so clean looking very very good video
That’s pretty ingenious, really!
Looks like a lot of fun! I have a LOT of trucks in my collection. Gonna have to give it a shot. Thanks for sharing 😎👍🏽
That’s sick!
7:38 curve the wires away from the car body and they "hook" in better
it will also guarantee a better hold if its bent and imo just looks stable in comparison to this. you could also bend it around completely but that is some extra work right there
Dude you are bad ass!!! I don't even know what to say lol!!! Great job on everything!!!
Wow! You are so talented and make it look so easy!
Very cool! Quite the skill you have with these.
How far you bend the V would be caster adjustment on a real car. Neat suspension idea, kind of a modified leaf spring set up. I was thinking the caster changing under load would be weird, but it really isn't. Looks great.
Hot Wheels fabrication, I love it!
Очень круто получилось. Конструкция неожиданная. Обязательно попробую сделать так же.
Wow, alot of engineering went into that. Great job!
The suspension looks awesome thanks for sharing
That truck looks great! Man I wish I had your touch!