All these comments asking what is dmg and what weight did you get ,just watch the video and your questions answered ,thankyou so much for sharing all you have Sir, im most impressed ,all the best
brother I have seen hundred's of videos with different procedures on precious metals recovery from e wastes but I found your video very useful and helpful. keep it up brother. God bless you
Fascinating informative video that has shown me a lot of technique i did not know, ime about to embark on a similar scale project in the UK after years of saving up MLCC's
Very impressive co-operative effort, and seemingly profitable as well. Your yield seems accurate since there may have been up to 20% trash in your initial material. Especially brilliant use of old school methods in order to minimize acid and hard chemical use.
OK,,in 2nd video you precipitated silver with HCl..that's the common mistake... instead precipitate palladium first with DMG,,then filter solution well for palladium,, then precipitate silver with suspended copper sheet or bar an use a bubbler,,the bubbler speeds the process up by 80%,,,when copper is completely consumed,add more until no more reaction happens,,then filter an wash,,,(treat the filtered waste an wash with HCl to recover any small amount of silver that may be left) after wash is complete dry an melt,,,,if you do get any silver chloride from the wash,,put it in crucible first,cover with a little corn flour,then put the rest of silver precipitant from copper on top an melt all together,,, the corn flour removes the oxygen,forcing the silver chloride to melt an not vaporize away,,,,an that's how its done,,,hope this helps you out
Hi bro, I want to learn gold recovery from cpu. Can you tell me the complete process. I know little bit but I am unable to recover complete gold from them. Can u please help me
Dave Hi, I hope you get this and get back to me. I have alot of ore. The area is only known for gold and silver. Well someone is wrong, I have platinum and palladium. I have 3 assays all say about the same. I just took zinc precipitated stuff to a refiner. He melted with a torch and got 36.7 grams 14k and plat. Then I showed him my blue filters from hot nitric, cyanide precip. He asked where did I come from with plat and pallad? I wouldnt tell him. Here cyanide is not regulated, but other chem's very hard to get. ammonium chloride I make, ammonia and HCl hot, filter, dry, crystals. Ok I really could use some guidance. I cant get a gold drop with SMB or Oxalic. Dirty AR. I was taking the zinc precip from cyanide solution, put in nitric/water warm, pour off liquid and put a copper pipe in this. During a melt of this with soda and a little borax, I would see silver BBs but pour no button. Found out the palladium was preventing me. So a miner I know told me to re dissolve in nitric hot, then add 5-6 gm cyanide to the liquid and filter the blue, then copper pipe the liquid. That worked. Ok then I tried the solids in AR to only find still was dirty. After this last melt he said not warm nitric/water, hot nitric first to remove silver and palladium. Then go for solids into AR hot to dissolve the platinum, denox twice then add a shot glass of HCl then warm ammonium chloride dissolved in water to precip the plat, then go for the gold precip with Oxalic. If doesnt drop, then zinc powder the AR and take this back to hot nitric, whats left should be my gold. The only exchange for hundreds of miles only wants silver and gold. So I need to extract them melt them and hold onto the palladium and platinum until I find a buyer for them. The 36.7 gm button I cut up flattened, put in hot nitric, then hot AR. Now the AR is yellow green tint. Stannous test very dark black then turns to orange. In middle of denoxing this now. Is everything above process correct? Thanks
Love you umar brother i am mohsin ali from pakistan lot amount of knowledge we gain from your videos love you love you and your videos keep it up bro .
New subscriber here. Wow!, even though it is alot of work for such little payoff.... it sure looks to be an AWESOME expirience to do something like this. And thats priceless. Great job, great video.
Morning my late husband never got around to finishing any of this process off i’ve got some jars of the green liquid. I believe this Aquia. I don’t know what to do with this process now. One of the containers also filled up with Order overtime. Could you point me in the direction of the right Video?
In today's value its around 2500 euros (2700 usd?) Gold has gone up but palladium down. Makes around 63 euros a kilo, taking chemicals and gas, labour etc. I'm guessing it's worth around 30-40 euros per kilo when you're done with it.
I was expecting 2% of platinum means around 80 grams, dear please check why you got less yield. I appreciate your efforts, patience, hardwork & dedication.
salam alekom bro really you are a genius,,, go on and i want to tell you that dmg is dissolve in alcohol with a little of heat and thank you very much for your time
Hello very nice video. Could you help me with one thing? If I have Ag,Au, Pt, Pd and I start with HNO3 then everything would go into solution but only gold will not react, can I then melt the gold that didn’t react with HNO3? I don’t need pure gold just want to recover. Next question is if I have Ag, Pt, Pd in my HNO3 solution so I start with adding HCL to make silver chloride, but what do I do later to recover Pt and Pd?
Hello, please tell me if you have large volumes... why do you restore palladium by burning, calcining the temperature? with this volume, large metal losses..
The adding DMG (Dimethylglyoxime) Precipitates The Palladium out of weak Nitric and water solution and after a while Platinum Precipitates out of the Solution as a Blue looking mud or powder....DMG is kinda pricey stuff compared to powdered Zinc to Precipitate with....I was wondering how you were going to get the Pd out....You Guys Hard Workers...Great Videos I Enjoyed ........Rich......:)
And I belive Sodium Chlorate NaCLO3 will Precipitate Palladium out of Solution...Can be made with Bleach ...Or very Hot Salty water And Computer Hard Drive Disc's as Anode Or Cathode And a Carbon Rod...The Sodium Chlorate will fall to the bottom....The Chlorate will go into '"Cold"' water Before Salt will...Boil down the Bleach until dry ...Stirr,Stirr....Take the Powder drop it slowly into Super ice Cold Water the Salt will go to the Bottom and the Chlorate will go into cold water...Then Repeat Until you can add a little Sugar to it.50/50..Drop of Sulfuric Acid will set it on Fire...H2SO4 Then you know it is correct.......:)
Thanks for the video. I hope you can offer some guidance. I am doing ore. The area is known for gold silver. Well I have assay reports and buttons to prove palladium and platinum. I recently found out, so it has kicked my butt for over a year now. I grind fine put in cyanide, mix and air 24hrs, filter liquid, zinc plate 24hr, rinse precip off plates in water, filter. This I was putting in warm nitric/water, pour off, melt remaining solids...OOp's. Every time I put in AR would not precip with SMB, platinum was stopping me and just found out palladium. The refiner torch melted a 36.7 gm 14k gold and platinum. They don't want palladium and platinum since this area is only known for silver& gold. They asked where did I get this, I wouldnt say. Ok I just found out alot in past 2 weeks. Let me run this down to you and hopefully its correct or you can add some guidance. Grind ore with lime& water in ball mill to remove sulfur and arsenic, rinse, cyanide PH11 , mix& air 24hrs, filter liquid zinc plate 24hrs, rinse plate off in water, filter precip, put solids in HOT nitric, pour off liquid, put cyanide 5-6 gm into this let stand filter blue away, the liquid put copper pipe in to precip silver. The solids after nitric put in AR until all is dissolved[yellow-green], denox twice adding HCL, then while hot, mix ammonium chloride in warm water pour into AR to precip platinum, filter, the liquid bring back to heat add Oxalic to precip gold, if after a few hours nothing, zinc this then take zinc precip back into hot nitric, what remains is the gold? Ok the blue palladium and yellow platinum has to be calcined? Then torch with what and how?
How much does it cost to go through that process? Buying the materials and paying for the smithing.....? I bet it's not worth the hassle of going through all of that just for 100 bucks.
El resultado final, de la plata, paladium, y oro es el total de los 41 kg de todo el material? Ya estoy juntando también de esas cositas y tengo varias un saludo y nuevo suscriptor. Amigo saludos desde México.
Do Ya'll Convert your Silver Chloride back to the Metal Silver with Powder Sodium Hydroxide (NaOH)...........?? Then Rinse the Silver Powder to Remove all the Salts.....
+KaliyaK You want to drop silver without dropping other precious metals. I imagine copper will drop the silver and other precious metals too. which you don't want to. The objectif here is to separate your target metals I guess.
A Benothman I see. Normally i have just silver on solution, i dont do much mixed metals solutions, but yes copper would reduce other metals as well. Thanks for noting that.
Pd has done, siver has done , and gold also has done, ok could you explain please that , how much meterial was. firstly you make pd , siver was in the blue solution ,
I have a question about the deposition of silver with palladium and how to separate the two from some and what materials are used and thank you very much.
I shall use DMG in catalytic converter for palladium and platinum , i like ure videos love u bro I hope u will make full video of catalytic converter for plattinum ,PMG PRECIOUS mettel refining and recovery videos
BHAI JI YE JO HAI SALENCAR KI MITTI HAI KYA YE TO BAHUT HAI MERE PASS AMEIRIKI CAR KA BAHUT HAI YANI 30 KG TAK HOGA PAR FARMULA NHI PTA HAI KESE NIKLEGA PLEASE AAP BTAO JI BHAI JI
great job,,Umar,,,I did expect more palladium than that,,but I've never recovered from MLCC,,,I have refined many,many pounds of silver though,,,you never have to suffer loses with silver,, if you'd like my advice was commit back to me,,I'd be happy to help
hello bro 1-MLCC + HCl - filter 2mlcc + flame --- the capacitors burned 3-MLCC nitric + water + (1/1) 4-5 days later, I boil once. 5-solution is green. It is dark at the bottom, there is a white precipitate on the top. silver and palladium targeting. What should I do now?
HELLO BRO... DMG I bought it. feed horses given to racing horses! I mixed with 700 gr of the solution containing 2% dmg. the result sucks! filtrate the solution. Green pudding in the filter! the solution is still green. I threw a piece of aluminum, the reaction started. What should I do next?
All these comments asking what is dmg and what weight did you get ,just watch the video and your questions answered ,thankyou so much for sharing all you have Sir, im most impressed ,all the best
brother I have seen hundred's of videos with different procedures on precious metals recovery from e wastes but I found your video very useful and helpful. keep it up brother. God bless you
Fascinating informative video that has shown me a lot of technique i did not know, ime about to embark on a similar scale project in the UK after years of saving up MLCC's
Very impressive co-operative effort, and seemingly profitable as well. Your yield seems accurate since there may have been up to 20% trash in your initial material. Especially brilliant use of old school methods in order to minimize acid and hard chemical use.
the rougemillenial do you have easy way to preduce sodium chlorate pls
OK,,in 2nd video you precipitated silver with HCl..that's the common mistake... instead precipitate palladium first with DMG,,then filter solution well for palladium,, then precipitate silver with suspended copper sheet or bar an use a bubbler,,the bubbler speeds the process up by 80%,,,when copper is completely consumed,add more until no more reaction happens,,then filter an wash,,,(treat the filtered waste an wash with HCl to recover any small amount of silver that may be left) after wash is complete dry an melt,,,,if you do get any silver chloride from the wash,,put it in crucible first,cover with a little corn flour,then put the rest of silver precipitant from copper on top an melt all together,,, the corn flour removes the oxygen,forcing the silver chloride to melt an not vaporize away,,,,an that's how its done,,,hope this helps you out
Thanks bro. I will try
Hi bro, I want to learn gold recovery from cpu.
Can you tell me the complete process.
I know little bit but I am unable to recover complete gold from them.
Can u please help me
Full name of DMG PLZZZ
Dave Hi, I hope you get this and get back to me. I have alot of ore. The area is only known for gold and silver. Well someone is wrong, I have platinum and palladium. I have 3 assays all say about the same. I just took zinc precipitated stuff to a refiner. He melted with a torch and got 36.7 grams 14k and plat. Then I showed him my blue filters from hot nitric, cyanide precip. He asked where did I come from with plat and pallad? I wouldnt tell him. Here cyanide is not regulated, but other chem's very hard to get. ammonium chloride I make, ammonia and HCl hot, filter, dry, crystals. Ok I really could use some guidance. I cant get a gold drop with SMB or Oxalic. Dirty AR. I was taking the zinc precip from cyanide solution, put in nitric/water warm, pour off liquid and put a copper pipe in this. During a melt of this with soda and a little borax, I would see silver BBs but pour no button. Found out the palladium was preventing me. So a miner I know told me to re dissolve in nitric hot, then add 5-6 gm cyanide to the liquid and filter the blue, then copper pipe the liquid. That worked. Ok then I tried the solids in AR to only find still was dirty. After this last melt he said not warm nitric/water, hot nitric first to remove silver and palladium. Then go for solids into AR hot to dissolve the platinum, denox twice then add a shot glass of HCl then warm ammonium chloride dissolved in water to precip the plat, then go for the gold precip with Oxalic. If doesnt drop, then zinc powder the AR and take this back to hot nitric, whats left should be my gold. The only exchange for hundreds of miles only wants silver and gold. So I need to extract them melt them and hold onto the palladium and platinum until I find a buyer for them. The 36.7 gm button I cut up flattened, put in hot nitric, then hot AR. Now the AR is yellow green tint. Stannous test very dark black then turns to orange. In middle of denoxing this now. Is everything above process correct? Thanks
Please tell me. What is DMG?.
Well done Sir
Very entertaining! Really old school and impressive. Thank you.
You can learn everything from our official website.
goldenscrap.com
@@goldrecoveryHello, I couldn't melt platinum palladium. At what temperature does it melt? How many minutes should I hold the fire?
Kepada yutube dan kepada semua yg hadir disini saya sangat terbantu dan terimakasih atas vidionya . Aku senang sekali .
I have seen all three parts and I agree with you, you are working very hard.
Now that was an awesome process of gold & silver recovery.
Thanks man.
Very nice video
Thanks 👍
Do u know urdu
Hello, how are you? I guess you are constantly mining palladium, platinum and rhodium.@@goldrecovery
Very good! Like! Like in Russia!
Thanks brother.
very good .... thanks...
Have you ever tried to recover Rhodium after recovering the Platinum?
Love you umar brother i am mohsin ali from pakistan lot amount of knowledge we gain from your videos love you love you and your videos keep it up bro .
Thanks bro.
@@goldrecovery where are you form bhai umar please tell me
Good job ! Amaaaaazing .... nice.
Nice job
Super! 👍🤝☺️
Thank you man,
You're great man
New subscriber here.
Wow!, even though it is alot of work for such little payoff.... it sure looks to be an AWESOME expirience to do something like this. And thats priceless. Great job, great video.
I call that little work for over 4000 USD pretty good payoff.
I calculate the value of Gold, Silver and Palladium is around $4715 USD .... not bad for 40 Kg of electronic junk capacitors !!
👏 brilliant skills
Morning my late husband never got around to finishing any of this process off i’ve got some jars of the green liquid. I believe this Aquia. I don’t know what to do with this process now. One of the containers also filled up with Order overtime. Could you point me in the direction of the right Video?
Super my friend
Thanks bro.
I calculate the value of Gold, Silver and Palladium is around $4715 USD .... not bad for 40 Kg of electronic junk capacitors !!
In today's value its around 2500 euros (2700 usd?)
Gold has gone up but palladium down.
Makes around 63 euros a kilo, taking chemicals and gas, labour etc.
I'm guessing it's worth around 30-40 euros per kilo when you're done with it.
I was expecting 2% of platinum means around 80 grams, dear please check why you got less yield. I appreciate your efforts, patience, hardwork & dedication.
palladium
Yes brother you will be right.In real icould not completely clean my mlcc. Many solder and other things wre in there.
Thanks for comment.
👏🏻 very good!
salam alekom bro
really you are a genius,,,
go on
and i want to tell you that dmg is dissolve in alcohol with a little of heat
and thank you very much for your time
You are welcome and please share more and more for support.
Wow! That was a lot of freaking work ❤😂😂😂😂😂
Asalmualakum Which gas are you using for melting gold
Sweet vid 💪💪 thank you for sharing
Dear Mr. Umer,
Great vedio.
Now please make vedio on latest cpu processor.
I have made but it is not free. It's premium bro.
Ok Bro... Please give me your contact details to buy that.
If dimethylglyoxime (DMG) not found, what powder can be used in its place to get it palladium
Пацан красава !!
Nice nice video
Thanks
Thank you
Bravos,🖐🖐👍
Hello very nice video.
Could you help me with one thing?
If I have Ag,Au, Pt, Pd and I start with HNO3 then everything would go into solution but only gold will not react, can I then melt the gold that didn’t react with HNO3? I don’t need pure gold just want to recover.
Next question is if I have Ag, Pt, Pd in my HNO3 solution so I start with adding HCL to make silver chloride, but what do I do later to recover Pt and Pd?
Super
Superb bro
Thanks
Does DMG precipitate palladium, even if the nitric acid is still active?
sir ji u are outstanding to good I never heard there is gold in Micc
Hello, please tell me if you have large volumes... why do you restore palladium by burning, calcining the temperature? with this volume, large metal losses..
Really good
Thanks.
Please make a video on Health and safety in the workplace. And also make a video on recycling of refinery workers lungs after their early death.
u r best
Thanks bro.
This solution product will get where..
The adding DMG (Dimethylglyoxime) Precipitates The Palladium out of weak Nitric and water solution and after a while Platinum Precipitates out of the Solution as a Blue looking mud or powder....DMG is kinda pricey stuff compared to powdered Zinc to Precipitate with....I was wondering how you were going to get the Pd out....You Guys Hard Workers...Great Videos I Enjoyed ........Rich......:)
Thanks so much.
And I belive Sodium Chlorate NaCLO3 will Precipitate Palladium out of Solution...Can be made with Bleach ...Or very Hot Salty water And Computer Hard Drive Disc's as Anode Or Cathode And a Carbon Rod...The Sodium Chlorate will fall to the bottom....The Chlorate will go into '"Cold"' water Before Salt will...Boil down the Bleach until dry ...Stirr,Stirr....Take the Powder drop it slowly into Super ice Cold Water the Salt will go to the Bottom and the Chlorate will go into cold water...Then Repeat Until you can add a little Sugar to it.50/50..Drop of Sulfuric Acid will set it on Fire...H2SO4 Then you know it is correct.......:)
Please ask what chemical is DMG
DMG Full Form pls?
@@nagmameraj1329 weak HNo3, meens only have the HCL in solution, to break the equilibrium...and release, AU is last
Thanks for the video. I hope you can offer some guidance. I am doing ore. The area is known for gold silver. Well I have assay reports and buttons to prove palladium and platinum. I recently found out, so it has kicked my butt for over a year now. I grind fine put in cyanide, mix and air 24hrs, filter liquid, zinc plate 24hr, rinse precip off plates in water, filter. This I was putting in warm nitric/water, pour off, melt remaining solids...OOp's. Every time I put in AR would not precip with SMB, platinum was stopping me and just found out palladium. The refiner torch melted a 36.7 gm 14k gold and platinum. They don't want palladium and platinum since this area is only known for silver& gold. They asked where did I get this, I wouldnt say. Ok I just found out alot in past 2 weeks. Let me run this down to you and hopefully its correct or you can add some guidance. Grind ore with lime& water in ball mill to remove sulfur and arsenic, rinse, cyanide PH11 , mix& air 24hrs, filter liquid zinc plate 24hrs, rinse plate off in water, filter precip, put solids in HOT nitric, pour off liquid, put cyanide 5-6 gm into this let stand filter blue away, the liquid put copper pipe in to precip silver. The solids after nitric put in AR until all is dissolved[yellow-green], denox twice adding HCL, then while hot, mix ammonium chloride in warm water pour into AR to precip platinum, filter, the liquid bring back to heat add Oxalic to precip gold, if after a few hours nothing, zinc this then take zinc precip back into hot nitric, what remains is the gold? Ok the blue palladium and yellow platinum has to be calcined? Then torch with what and how?
please I want to ask a question if an aqua regina contains gold and platinum How can I extract them with any lost?
first ad smb for gold. and then you can yous amunium chloride or sodium chlorate for platinum.
Good video! Make one recoveryng platinum please
Very nice videos I like your video
Thanks.
What kind of filter are you using and where can I find?
Aaslam Alewkum bro me Janna chhata hu ki Aapne silver kb separate ki Pd Se phele Ya baad me
What ingredients is the crusibel made of master ... thank you
How to palladium recovery to catalytic converter please video sir
what kind of filter do you use?
Wich is the special gas you use for PD and PT? Thanks man!
How much does it cost to go through that process? Buying the materials and paying for the smithing.....? I bet it's not worth the hassle of going through all of that just for 100 bucks.
sir where can i cintact you? we have here palladium white gold in sand . we biometric it already.
El resultado final, de la plata, paladium, y oro es el total de los 41 kg de todo el material? Ya estoy juntando también de esas cositas y tengo varias un saludo y nuevo suscriptor. Amigo saludos desde México.
Olá , amigo esse DMG é o que ?
I have metal paladium quantity 28 kg i in vietnam 🇻🇳 i
hola podrias ayudarme con una duda dobre el dmg ? que es exactamente?
That's awesome! Great work. But why was there such a loss of Silver weight? Was the difference from the paper?
when silver chloride melt it lose weight.
thanks for comment.
Do Ya'll Convert your Silver Chloride back to the Metal Silver with Powder Sodium Hydroxide (NaOH)...........?? Then Rinse the Silver Powder to Remove all the Salts.....
I use copper metal to reduce the silver from solution. This way it precipitates actual silver metal powder.
+KaliyaK You want to drop silver without dropping other precious metals. I imagine copper will drop the silver and other precious metals too. which you don't want to. The objectif here is to separate your target metals I guess.
A Benothman I see. Normally i have just silver on solution, i dont do much mixed metals solutions, but yes copper would reduce other metals as well. Thanks for noting that.
What exactly is the DMG it prepares for palladium?
Pd has done, siver has done , and gold also has done, ok could you explain please that , how much meterial was. firstly you make pd , siver was in the blue solution ,
Aap kaha sa ha Bhai plz bath karna my nomber 9149014486 up moradabad
bro can you please tell me how many kg mlcc you need to cover these pladdium gold and silver and i like your all videos
I have a question about the deposition of silver with palladium and how to separate the two from some and what materials are used and thank you very much.
nice
Special gas torch with 2 pipes wow pls tell me about this and its gas.
Roughly $1,400 US dollars in palladium very nice
Votar ke ahhge ki prosesh to nhi batai ke kon se phvdar ya kon see miti fomse paladiym Ni kalta ha
Plz explain of full form of DMG
How did you get the silver?
How does that palladium only weigh 47g? Palladium is denser than silver, and a chunk of silver that big would weigh several times that much.
Sir how can i recover tin (sn) dilluted in nitric acid
i know i'm 4 years late, but i have a question, how much did all the process cost vs how much does theses metals give in return?
I do not have DMG , you can use zinc?
Us cyanide.
I shall use DMG in catalytic converter for palladium and platinum , i like ure videos love u bro
I hope u will make full video of catalytic converter for plattinum ,PMG PRECIOUS mettel refining and recovery videos
gold recovery DMG the full name is what bro?
I have metal paladium quantity 28kg i sell please message me th-cam.com/video/kBE555jl1nM/w-d-xo.html
BHAI JI YE JO HAI SALENCAR KI MITTI HAI KYA YE TO BAHUT HAI MERE PASS AMEIRIKI CAR KA BAHUT HAI YANI 30 KG TAK HOGA PAR FARMULA NHI PTA HAI KESE NIKLEGA PLEASE AAP BTAO JI BHAI JI
The yield looks about right for Silver and Palladium but where did the gold come from?
In part 1 there were some ic chips in the batch, that's probably it
3185 ppm por tonelada de palladium me dio los resultados del laboratorio
great job,,Umar,,,I did expect more palladium than that,,but I've never recovered from MLCC,,,I have refined many,many pounds of silver though,,,you never have to suffer loses with silver,, if you'd like my advice was commit back to me,,I'd be happy to help
Thanks brother.
i will happy.
Bro how to recover silver n Pd from ceramic? any idea? normaly i use nitric to recover silver....and Pd....i dnt hv ideas...pls advice me...thx
david qrobinson how can I recover tin from tin oxide dissolve in nitric acid
Great work!! Could you be precise about the ingredients.. I mean, could you tell me how much weight of capacitors or chips you used???
you can know every thing from our website.
goldenscrap.com
gold recovery thank you so much for writing back.
Sir me ap se total prosess seekhna cahta hn plz reply
Hola tengo mineral palladium y no se como como procesar algun tutorial
Hello Umar thankyou again for the nice video but You did not tell me why did you use the material A, what is the task of material A ?? thanks
It is a lead and other metals compound.when this melt in crucible it absorbed all metal that we need.
You put DMG to precipitate palladium from aqua regia?
Olá esse precipitante de paladium DMG ,é que substância química?
D
imetilglioxima C4H8N2O2
palladium gone up in price so much that the chunk of gold in this video is worth less than the chunk of palladium
the gold was from the MLCCs too? I didn't know there is gold in the MLCC.
Hello Umar. Great job. How many percent Pd and Ag are in MLCC? How much costs MLCC?
what are you doing with all the waste materials?
hello bro
1-MLCC + HCl - filter
2mlcc + flame --- the capacitors burned
3-MLCC nitric + water + (1/1)
4-5 days later, I boil once.
5-solution is green. It is dark at the bottom, there is a white precipitate on the top.
silver and palladium targeting.
What should I do now?
the green solution is not filtered!
I'm in the muddy mess.
please show me a way ...
This was not the right way.
Now try to sponge this solution with the syringe. And then precipitate silver with hcl and palladium with DMG.
HELLO BRO...
DMG I bought it.
feed horses given to racing horses!
I mixed with 700 gr of the solution containing 2% dmg.
the result sucks!
filtrate the solution.
Green pudding in the filter!
the solution is still green.
I threw a piece of aluminum, the reaction started.
What should I do next?
Bro I want to know that how much ram boards can make 1kg of mlccs Plz explain from you experience
Bro catalytic converter platinum recover full process video upload kar do
please make a video on gold plating.
ok bro
Awesome bro I recover rh pt and gold by chemical but I have a prblm I can't recover pd so please help me I want to know how recover pd by chemical
so... do all of this value them?
Yes
DMG is mean :dimethly gyosyme
First to last step please
Брат скажи ДМГ осаждает только палладий?
Howdy Brother Gold Recovery..Rich here Partner...Can you also Precipitate Palladium with Sodium Chlorate......? NaCLO3....
Sir,
For mwlting silver nitrate, ratio borex and silver nitrate, how mouch sir?
As need