ฝัง
- เผยแพร่เมื่อ 18 พ.ย. 2022
- Buy yours here
F-series: www.bimmernetwork.com/discoun...
G30: www.bimmernetwork.com/discoun...
G01: www.bimmernetwork.com/discoun...
Buy your MHD License here: www.bimmernetwork.com/discoun...
------------------------------------------------------------------------------------------------------------------------------------
Join this channel to get access to perks:
/ @kern417
Order your B58 parts through my BimmerNetwork Affiliate Link (Coupon Code "kern417"):
www.bimmernetwork.com/?afmc=k...
Blackvue Affiliate Link: shop.blackvue.com/shop/ref/ke...
Coupon Code (10% off): kern417
MERCHANDISE
T-Shirts: kern417.creator-spring.com
Stickers: $5 each. Email kern417yt@gmail.com
FOLLOW ME ON MY SOCIAL MEDIA
/ kern417youtube
/ kern417
/ kern417
Support the people that support me! If anything that I post has influenced your buying decision, please let the company know and tag me on social media!
Sponsors:
DOCRace
docrace.com/
/ doc_race
/ docracemanifolds
OdinTuned
/ odintuned
/ odintuned
@KiesMotorsports
www.kiesmotorsports.com/?aff=28
/ kiesmotorsports
/ kiesmotorsports
Eurocharged Cincinnati
eurocharged.com/
/ eurochargedcincy
/ eurochargedcincy
Blackvue Dash Cameras
shop.blackvue.com/shop/ref/ke...
/ blackvueofficial
/ blackvueofficial
Paradigm Engineering
paradigmengineering.co/?ref=k...
/ paradigm_engineering
/ paradigmengineeringllc
Ross Racing Performance
www.rossrperformance.com/
/ rossrperformance
/ rossrperformance
BimmerNetwork
www.bimmernetwork.com/?afmc=k...
/ bimmernetwork
/ bimmernetworkco - ยานยนต์และพาหนะ
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 6](http://i.ytimg.com/vi/CVUx09Rx0-M/mqdefault.jpg)
A side note, some of the early harnesses (or random) didn’t have the pin locker slid over. I was getting canbus time out codes intermittently. If you look inside both plug ends there is a grey slider bar. My slider was not put in the locked position and some of the pins vibrated out of touch. If this happens I’d check those. Thanks for the vids as always bro!
Nice improvement over the previous setup/fitting!
As for your content itself, it's always spot on and hundred percent pure information with no lifestylish BS and brostuff, so not sure it's an improvement over previous videos, but at least it's perfect.
Awesome! Im running the exactly same ECA kit. Looking forward to the next videos coming up about it! Would love to have your thoughts on additives for Ethanol blends like Lucas Oil Safe guard and similars. Cheers!
Thanks for the recognition glad you like our Ethanol 360 high flow fittings as much as we do! The video is very informative and well done good work!
I have installed mine in a g30 5 series and am having issues with the fittings popping off on the hpfp side. What could I be doing wrong? I pull them back and slide on, they feel snug when I pull them by hand. Car reeks like fuel now.
Thank you.
Sucks that I can't find an install video for a b58 gen 2.. I just received my mhd flex fuel kit but those connections aren't where they are for the gen1 trying to find where they are
Nice kit :))
Is it necessary/ mandatory to install a flex fuel kit? or can i just use MHD stage 2 plus tune with a b58tu pump on full e85? also thank you for all the content and knowledge you give us. Thanks
you can but just make sure your local gas station's ethanol quality is actually e85
Great video always appreciated !! What would happen if you installed it without a tune ??
GR SUPRA gang
You can still read it with a Bluetooth/wifi app but the car can't Automatically adjust without a tune
@@kern417 you the man that’s exactly what I need to know much appreciated
Dumb question but i was having issues with this kit with my g30, is there a correct spot to ground the flex fuel kit wire? I dont have that bolted spot like the f series cars
Question: Can the flex fuel kit be left installed even if MHD has been uninstalled completely and DME locked for smog check?
I have those 360 fittings (3/8) and it does not fit on to my stock low pressure line.
Could you do a comparison between the reflex lite and the MHD flex Fuel and the pros and cons? Thank you
those are 2 completely different products
Can you tell me the torque specs for the brace?
Hello there!
Before I asked wanted to mention this channel was my inspiration since I took my m240i Cabrio! I go through all stages now with Vargas GC+ stage 3 just ordered dorch flex kit 🙆♂️ I’m leaving in a Uk - very limited sources of ethanol in here
Mostly overpriced racing fuel etc
Do you know guys what particular/best type of ethanol needs to be mixed with 98 fuel? I’ve seen some people mix with just 98/99% bio ethanol or similar some others says b58 doesn’t like it? Any advices will be much appreciated!
I don't have personal experience with it but I know a lot of people in the UK buy bioethanol in bottles and use that.
@@kern417 many thanks Kern!
Ethanol will work, now with bio-ethanol, from what I’m seeing 95% Ethanol (190 proof) stuff pops up. Mainly used in fireplaces. If the ethanol you’re referring to is 200 proof 99/100% ethanol, that will work. Either that or E98 or E85 race fuel , (VP X85, Ignite Red, Sunoco E85R) etc. If you’re looking for a more affordable option than race ethanol, try and see if there are any distillers that produce ethanol and see how the price compares with the race stuff.
@@devastaterzx6906 many thanks for your prompt reply! Cost is the one thing but availability or if I can use something as a emergency equivalent etc
I just bought the bootmod3 version there’s a Black Friday sale rn kern besides installation any other big differences? To your knowledge can you use a motiv reflex with bootmod3?
you can use motiv reflex with bm3 but its not fully integrated. mhd is better if you want to run motiv bc it can pop a cel if something is wrong. I don't personally use motiv so someone else that does might know more details.
The main difference is installation location. The sensor itself will work but you'll need to run wires to the front of the car to connect to the reflex
Thanks!
i really appreciate your generosity
Hi Kern. Awesome video as always. Would the mhd flex kit work with reflex and port injection, or would I need another sensor for that line.
Edit: I see you you answered it in your question. To get the one with the loop would the controller need to say gen2?
All the ones they sell now use the loop design
I have a 6mt 240i with MHD. would the BM3 FF kit work with the MHD flexfuel OTS? or would I have to opt for the Dorsch FF Kit or Reflex systems?
It will not work with the harness it has. You'd basically need to wire it up like a reflex kit
What is the main difference between this UPDATED flex fuel kit compared to the kit MHD first put out? I have the original kit installed on my car currently
The loop fittings so it can fit multiple setups. The old Design was a cut-to-fit replacement fuel line so they needed different lines for different chassis
Hey kern are there two kits for gen 1?
I think in the unboxing video I yo said it connects to the lpfp and the epk? But this one is up at the front or the car
the b58 mhd kit only connects in the engine bay like shown. but there are other kits that connect to the lpfp from other companies. and the mhd kit for some other engines connects to the lpfp.
If I have e30 and I’m running the MHD OTS stage 1 flex fuel tune is that the same as running the straight e30 map or am I sacrificing power for the flex fuel tune at e30?
th-cam.com/video/TuuuCit1u-M/w-d-xo.html
How do I go flex fuel with a manual gen 1 ?
Any idea if/when BM3 will commercialized their own. I really like the simplicity of it, everything in the engine bay +1 for MHD on that
+2 for you for an other appreciated informative content😘
I don't think bm3 will change theirs but we'll see
@@kern417 any chance this product could work with BM3 platform?
Yes
@kern417 just to clarify, as I can't seem to find a specific answer - this kit will work with BM3 flex tunes? I would assume it would since it should be sending the same CAN data to the dme that either tune is reading? Thank you!!
@@nickm820 it should just select the right option in the flex fuel settings
What's better, the BM3 flex fuel kit, or this MHD flex fuel kit? And why?
They both work. This one is easier to install and retrofit with future uogrades like a Motiv Reflex controller. Bm3 works with 6MT out of the box.
You said the flex fuel kit wont adjust for a full tank of 91 octane safely, but my question is can i run 91+e85 to get my e40 mix or do i need to run a higher octane like 93+e85 to get my e40 with the flex fuel kit without a custom tune
yes you can. it just can't tell the difference between 91 and 93
Nice! So with this kit let’s say i have e31 in the tank with OTS MHD E30. And for some reason the ethanol content dips to E29. This kit will pull timing or power to be safe, until i add some in to even out the blend?
yes
Im running reflex plus and was wondering if this would still be needed? I know they are two different products just not sure if they both do the same thing.
Nope reflex can act as it's own flex fuel sensor
@@kern417 appreciate it bro
@kern417 im currently stage2+ e40 map once installed i dont need to flash map to be able to read ethanol content correct; can i just select (ethanol content active) or (ethanol content can) as one of the parameters for data logging ?
You'll need to reflash your map and set the ECA option that you're using. If you want to enable Flex fuel, you should change all of the map options to pump gas.
@@kern417 appreciate the clarification so i will set mhd eca, reflash on E40 map then should be able to read ethanol
Yep
so if I purchase this kit now for the oem/tu pump and decide later to upgrade to a Dorch would I be able to reuse this? Or would i need to buy another kit. Do you know what the differences are between the two kits?
Yes it works with both
So basically you plug in and it runs whatever ethanol you have in the car such as (e40 mix) better ?
Yes
I have a Gen1 G30. Will this work? I see it says gen2 on the analyzer box.
Thanx!
They make a version for G30. Check the links in the video description
When putting the dme cover back on, did you have any issues. Mine is all covered except one spot on the harness, it’s outside the cover leaned against the strut tower, wires exposed, will that be an issue, or what type of cover can I put over it like a tape or
The wires run through the same gromet in the firewall. My cover installed just like normal
@@kern417I meant like at 16:44, my harness is for other plug in, on my 2018 340i xdrive auto. I couldn’t just squeeze the harness into that portion, the wire fit in but the original oem plug to the flex fuel plug side, that part is sitting out the cover under where your hand is, at 16:44
@@kern417couldn’t do what you did at 18:51 since the plug in the way, so it’s just gonna have to sit outside the cover but it just looks sketchy, maybe I can put a blanket of electric tape over it?
@@340istephen maybe try unplugging both so you can run the wire underneath the main dme harness
Do I need the custom PR fuel hoses to install this flex fuel kit with a DS2?
No
So for someone like me that has access to e85 but only 91, I have to get a custom tune for my flex fuel kit to work?
It is recommended or just use map switching
I’m confused, I live in California and don’t have access to 93 octane. I want to run the mhd stage 2 hpfp tune on e40. Which I can do mixing 91 with e85. But let’s say I’m running low on gas and there’s no e85 pumps near me, will the can flex fuel kit allow me to just run 91 octane on that same tune ? Will it auto adjust it for me ?
i would recommend flashing stage 2 91. there is no 91oct tune for stage 2 hpfp from mhd.
@@kern417 so at that point the mhd can flex fuel kit wouldn’t even help me correct ?
@@kern417 so let’s say I have 1 gallon left in the tank on the e40 tune, and I fill it all the way back up with 91 and flash back to regular stage 2 ots 91 map, will everything be ok even with that little tiny ethanol context still left in the tank ? Basically I’m asking if it safe to run less than 1 gallon of e85 on a 91 octane tune
Yeah it should be good
@shelbyhaiketic4212 correct, the flex fuel tunes are Based on 93oct unless they change that in the future
Is there a OTS flex fuel tune for this? Or do we have to get a custom flex fuel tune from a tuner to run this?
There are OTS maps for ethanol fueling on BM3 and MHD.
Yes there are ots maps
I was told the MHD flex fuel kit is compatible with BM3? Thoughts?
some people have gotten it to work. if it doesn't work out of the box then a software update to patch it may make it work. reach out to bimmer ecu solutions if you need help with that
Hi, is it safe to run just pump gas with mhd eca flex fuel? In my country not a lot gas stations have e85, so time to time i gonna use just pump gas or E**. Is it fully adjust timing? Thanks
Absolutely
@@kern417 I want to run the stage 2 e40 hpfp map. I’m in California with just 91 max, but it says the minimum for stage 2+ is 93 octane. What do I do ?
@@shelbyhaiketic4212I have the same promblem did you ever end up finding what to do ?
@@user-vl4on3ll9v actually yes I did, but it’s a lame solution. I just run the regular stage 2 91 map when I want to only run pump gas, and I run e40 hpfp map when I’m mixing e85. I contacted mhd, but their customer service is complete garbadge and they claim there should be a 91 option got the hpfp map, but as we can both see there clearly isn’t one. But yea that’s the only way that’s been working for me, and my install guy who’s really inclined with these cars says that’s perfectly fine.
@@user-vl4on3ll9v also in the future with different cars I highly recommend bm3 over mhd they have way better customer service and answer all questions as far as I’ve heard, but as far as power wise mhd has been great for me, especially on e40. Hope this helps
Does anyone know if this works with 6MT? If not, what are my options if I’m running MHD tune?
It does not. You can use reflex or dorch
Hey kern quick question I just installed mine today how do I find it on my mhd app and how would I know if it’s working or not on the mhd app
go to the dashboard and add a gauge for ethanol content.
@@kern417 and if the gauge isn’t reading anything what does that mean? like I can see the gauge but it’s not reading
@@douglasgreene3084 check the mhd analyzer. Make sure all the lights are lit up showing that it's getting power and it's communicating
Hey do you know if works with 2023 supra a91mt ?? With and e tune with mhd
They have an optional kit with wiretaps that can work with manual transmission cars now.
hey do you know if this kit will work on a 2020 m340i im tuned on mhd already
There's a version for g20 so as long as mhd has the feature available then it will work
So dont really understand cause of my english, they will develop it for manual soon or we have to use another solution? Thx for all content
They are working on it or you can hardwire it to the footwell module
@@kern417 I really want to buy it but I don't really know how to do it, u think it is possible for u to explain me more exactly or if u have a link to a video where I can see the assembly? thx for all
@@azerty1604 check out how all the others install (bm3, dorch, etc) you'd need to wire it the same way
@@kern417 okay okay im gonna check it, thx man
@@azerty1604 no problem. I'll see if i can make a video on it in the future
@kern417 does this kit work with bm3 flex fuel map
Not currently
Any idea when/if BM3 will release a version for the G30 (540) ?
No body like us g30 guys. I’m still waiting
MHD does. I’ve been running my flex fuel kit for months on my G30 without any issues. Best investment I made besides my Hybrid Turbo.
Can you help me figure out where it plugs in ?
@@JadielJohnig slow.540 i’m having same issue did you figure out?
Sounds like there's a connector on the shock tower under the strut brace
Can you use bootmod3 Flexfuel kit on MHD..
Yes with the zeitronix option
I don't understand you say it didn't work with a manual transmission but don't you have a manual?
The 340i is auto
@@kern417 you have 2 then a 440 and a 340. Didn't know that.
They have an eth solution for us manual peps yet or in the works?
@@smokinHawkjh working on it but currently the only option is to hardwire to the footwell module
No that was his 340 he has both.
Do they same the same new type for the s55?
nope only b58s
Does it work for bm3
apparently there is a patch to make it work so yes
Does this support S58 engine
They have an S58 option yes
Does it come with instructions
No. These are your instructions
If you need a pump for that dude I got a Dorch stage 1 I need to sell. I’ll cut you a good deal!
I actually already have something on the shelf waiting 🙂 thanks though
@@kern417 no problemo!
How much you want for it!
@@jeremylevee1416 $700
Thanks for this review. BM3 kit is way easier to install. Its also not all plastic but nicely machined parts and quality lines. MHD kit is also restrictive and has no bypass for fuel to flow, just basic really.
This is the most ridiculous comment I've seen in a while 😂
we get it, you like the bm3 platform lmao
Way easier? How much easier? You mean it installs itself? Cuz the only thing easier than what I saw in this video is breathing lol.
But in their video of installation, they actually show the example of 91 octane fuel not 93 , so I don’t know why you’re saying this kit does not support 91 octane.
Also curious on this, have one ordered and planned to use with 91 octane. I guess I’ll just check logs a few times.
I think people asked if it can detect 91 or 93 and send that info to the dme to modify engine power, which this does not do.
I agree...this comment confused me. Kern is a master, but now I'm concerned about needing a custom tune with 91 and flexfuel kit...MHD has a multimap, stage 1,2 or 3 with 91,92 or 95 octane. I thought the beauty of this kit is taking out the guess work/custom tune piece, and now I'm doubting my setup...any clarification would be very much appreciated.
I did not say the kit does not support 91 octane.
Ethanol content is separate from fuel octane. You can have E0 fuel thats anywhere from 87 octane to 93+.
So you need to confirm that the E0 base map for your tune is not too aggressive for the pump gas you run. When I discussed with tuners, they specified that it was set for 93oct/98ron.
The safest bet is to get a custom tune for whatever fuel you have, especially if you have ACN91 fuel.
Sadly for G chasis this flexfuel kit only works for chosen types of HPFP🥲So if I upgrade from Tu to a Dorch in the future then I have to get a new flexfuel kit 😅
or just get the adapters for the fuel lines