Looks great! Did the same thing a few years ago with my 86’ tracker. Gutted the entire thing and rebuilt all the decks and built in new compartments. Never even had a back deck son needed to reframe everything. Huge upgrade having the extra standing and storage space. Nice video man!
I have a 2021 tracker classic I've been wanting to do this to. Nice video, and nice new storage! That's the one major downfall I have with this boat, that and the livewell size because I do tournaments.
@@VitalFishing yeah very nice boats though! And I’m replacing my carpet rn on my boat and adding removable seats when I stand in the front of the deck !
Me and my nephew were at the Bass pro shop talking to you and I was looking on TH-cam for some videos and you came up I am interested in Dillon building me the same setup
You are getting interference because you have your Garmins hooked up to your troller motor battery and the troller causes that interference to the screens and sonars. Either get a lithium 24 volt purpose built specific to that troller motor so you can run one battery EXCLUSIVE to the boats accessories and electronics alone or hook up your navs back up to the engine cranking battery. The way I run mine is a 3 battery as well, 1 AGM for the cranking battery, 1 AGM for the accessories and electronics exclusively and 1 24v purpose built lithium battery for the troller. It's a killer setup and one setup never interferes with the other. Maybe you resolved the issue already because this video is now 7 months old or so, but if you haven't this is the fix for that. NIce boat by the way. It reminds me of mine. ;)
@@VitalFishing ah. Okay I see. Yeah if you had to extra wiring which was too thin, I could see that happening as well. I'm glad you got it figured out!
Thanks for the great video! I am planning on getting one so, I will be hitting you up for Dillan's contact for sure. I just found your channel so I will be subbing.
@@gregbrown4110 but for the most part of you center the tray, you should be good right? I’m going to order one for my classic xl I just want to make sure I get the right one and hook up drainage to it if needed. I appreciate the reply
@@VitalFishing I’m right in the middle of installing mine. And can’t for the life of me figure out where to run the drain line. The foam goes all the way to the hull. And not really wanting to just put water in the boat that won’t drain. Any help would be great! Lol thank you
How do you mount the troll pedal? I am in the middle of buying mine 2022 and Tracker told me they cant install one because of something with the boat frame or something?
Who designed your deck? I would love to have that person build me one and I would but it and pay the shipping cost if it could be built to where I could assemble it myself to my boat. That deck is awesome.
Nice set up. I have a similar tracker just older and also upgraded to a 24v trolling motor and would like to know your set up in the back with your batteries and fuel. Does having all 3 batteries on one side make you lean hard to that side?
Recent subscriber, awesome video and deck extension design! I recently got a used 2019 and as a bigger guy definitely need that additional room. Couple questions, did Dylan: A) Attach the extension directly to the boat or is it free to move around or take out? B) Total weight of the extension deck? C) Have any specs of the aluminum frame ? Thanks I’ll will certainly be trying to something like this on my rig. Good luck fishing!
thanks man... it is free floating so it can be taken out whenever... i would guess around 50 pounds... i don't as he did it all, i dont think he kept any records of measurement though
You said you can run in 10in of water. I live on the river I fish and am always worried about running wide open in 3ft of water. So my question is how do you go about running new water to check if it’s safe to run? Thanks. Get vid.
I'd like to do something like that, but having the 36v trolling motor I think it would just be too heavy. Plus the open area is good for the kids and me and the woman have slept down there
Man if ya ain’t caught a forearm or wrist on those not cut off metal self tappers extending .75-1.25 inches on those new door jams I’d get a angle grinder and clean that up.
Nice! The extra deck space was great idea. I almost bought that boat last year, but then decided on the tracker pro 170 instead. Also, just found your channel and subbed. So, gonna go back and watch a bunch of your vids! Haha Check mine out if you want.
Great video: did he glue the carpet or just staple it? Where did you get your carpet and how did you match it? I’ve called my dealer twice and corporate once and nobody can give me the info to purchase. Thanks.
I don't know the other answers but the carpet for newer Trackers is 16oz cut pile boat carpet in the color Midnight Star Gray. You can buy it a million place online.
You falling off the boat isn't the boat's fault. You really should make an apology video to Tracker for your clumsiness and ragging on their boat for your failure
I got family In surprise I just Visited From California ..... How bout you ( DYLON ) pre-fab a Kit and next time i come visit I'll drive the extra 40 miles and come pick it up 😎 LoL do you take VENMO --- No seriously 2021 Bass Tracker Classic XL ... Get'n FIshy NICE WORK 👊
@@VitalFishing awe mannn LoL LoL ya mean ,,( there's not gonna be instructions saying ,,some assembly required shipping via Fed Ex ,,allow 3 to 6 weeks for delivery ) 🤣🤣🤣 Thanks for Sharing your Video It looks AWESOME 👊 I'll be tackeling my project soon 2021 Black Tracker Classic XL 50 hp
I feel like we’re all posers and Dylan is a true fisherman, true handyman. Respect 👊
Lol yeah whenever I have a mechanical issue he’s the first one I ask
I’m about to buy a brand new classic XL, and I’d pay your friend to do that to mine too 😂
It was good running into you today Cole, Thanks for the advice!!!
Any time!
Looks great! Did the same thing a few years ago with my 86’ tracker. Gutted the entire thing and rebuilt all the decks and built in new compartments. Never even had a back deck son needed to reframe everything. Huge upgrade having the extra standing and storage space. Nice video man!
Thanks man.. definitely a big upgrade! Night and day difference
Building mine this weekend, appreciate it.
Awesome video quality! I’m getting the 2022 version of this tomorrow and you’ve already gave me some good ideas
Congrats, that is first class, and what a gifted friend.
Thank you, it was very nice of him!
Dude that is badass ... thats a well thought out extension... makes that boat storage more than double now
Yeah man, i cant imagine not having it now
Looks great and matches the boat . He did a great job.
Thanks brotha
That’s awesome upgrade.look really good
Thanks man 👌🏼
What motor are u running
@@luis9000 50 hp Mercury
That’s awesome.
Would like to get it done
Your buddy gets props.
Big time
Best thing you can do for Dylan, is buy him a jig saw. You'd be his best friend forever.
Thanks, got some good ideas for my Lund
Nice build
Looks factory excellent job....👍
Thanks man 👍🏼
I have a 2021 tracker classic I've been wanting to do this to. Nice video, and nice new storage! That's the one major downfall I have with this boat, that and the livewell size because I do tournaments.
I agree, the livewell is definitely a little small!
@@VitalFishing how was the install on the new trolling motor? Looking to upgrade mine too
@@AmazonWebService98 very easy
Just subscribed and I love the content and love the video ! Keep up the good work ! And got myself a bass tracker pro team 17 1997 and upgrading it !
nice! these bass trackers are great shallow water boats
@@VitalFishing yeah very nice boats though! And I’m replacing my carpet rn on my boat and adding removable seats when I stand in the front of the deck !
Great video dude and awesome rig!!!
Thanks man!
Very nice job!!
You got a thumps up for falling in the water. Im in the phx area as well. Maybe ill see you out on the water
Right on, say what’s up if you do!
I put my Gamins on a 30-amp hour LIFEPO4 battery with quick disconnects! no more noise!!!
If your electronics are buggy, I would check the wiring. May have to up the gauge size.
That’s sick!!
Thanks!
Top notch
Man. That big dude is flexible lol. He was kissing his knee😂
lol idk if i could do that again if i tried...
@@VitalFishing shoot. I bet. My hamstring and lower back was screaming for you lol. At my age if I fell like that I’d be down for a year😂
Thank you Cole for sharing a rare mistake! We all know you're usually perfect!
😂😂
Para un bote pequeño y es el mejor motor eléctrico que e tenido muy poderoso y ahorra mucha energía le doy un 10 de 10.
Good job
Me and my nephew were at the Bass pro shop talking to you and I was looking on TH-cam for some videos and you came up I am interested in Dillon building me the same setup
He works at bass so you could definitely ask him!
That deck is nice bro I have a tracker 170 and was wondering about extending my deck also
Thanks dude... it makes a huge difference
Run your Graphs direct to your battery that will get rid of the interferences .
I want to.install a home theatre and a bathroom on my 2024 Tracker Classic XL.
Awesome work on the new deck extension
I'd like to get mine done how can I reach out to him
Unfortunately he doesn’t want to do any, I know it’s a bummer
@@VitalFishing I'd just like to know if he as the design and measurement on paper
I have exact boat. Any issues installing the recessed foot tray?
Not at all!
Is the original deck built with an aluminum frame and wood flooring? Looks amazing, awesome job!
Yes and thanks!
Does your buddy build em for sale?
Haha no
You are getting interference because you have your Garmins hooked up to your troller motor battery and the troller causes that interference to the screens and sonars. Either get a lithium 24 volt purpose built specific to that troller motor so you can run one battery EXCLUSIVE to the boats accessories and electronics alone or hook up your navs back up to the engine cranking battery.
The way I run mine is a 3 battery as well, 1 AGM for the cranking battery, 1 AGM for the accessories and electronics exclusively and 1 24v purpose built lithium battery for the troller. It's a killer setup and one setup never interferes with the other.
Maybe you resolved the issue already because this video is now 7 months old or so, but if you haven't this is the fix for that. NIce boat by the way. It reminds me of mine. ;)
Thanks for the info but the graphs are hooked up to the cranking battery, I think the main issue was the gauge of the wire
@@VitalFishing ah. Okay I see. Yeah if you had to extra wiring which was too thin, I could see that happening as well. I'm glad you got it figured out!
Hey cool boat! I just got a used 2019 just like that. What do you use to wipe down that aluminum hull to keep it clean after taking it out?
Usually just vinegar water
@@VitalFishing hello again. Do you just use like a 50/50 water vinegar solution? Thanks for the help
@@benw6554 yes, they make other aluminum cleaner but honestly I just cleaned the motor because the boat oxidizes no matter what
@@VitalFishing ok thanks
Do you like having the recessed tray for your foot pedal? Thinking about putting one in my bass tracker here shortly.
Yes, could never go back
Thanks! Literally doing this this weekend!
did you have to change out the wiring or the trolling motor plug to switch to the 80lb?
I didn’t have to switch the wiring... but I do think I had to switch the trolling motor receptacle
Does Dylan (Dillon?) sell plans for that deck? I can eyeball it all I want, but can’t beat actual on paper prints. Framework atleast.
Is it possible to get the plans for this emailed?? I just bought a classic and this is the one down side I’ve seen with the boat
Unfortunately I don’t have the boat anymore
@@VitalFishing always a positive if you were able to upgrade!! Sweet video though brother!
great job. did you screw that deck to your boat floor? if so, how long of screws did you use?
No, did not screw it in
What would a upgrade cost for my 2018
Thanks for sharing. How did recessing the foot control on the trolling go? I have a heritage and was thinking of doing that.
if you haven't done it yet, you need to do it, your back will thank you!
@@VitalFishing Did you run into anything cutting the hole? Or did it go pretty smooth? Thanks for replying.
Thanks for the great video! I am planning on getting one so, I will be hitting you up for Dillan's contact for sure. I just found your channel so I will be subbing.
Thanks man
Question: I'm ready to install a recessed foot control tray in my Tracker Classic XL. Is there anything under the deck to be aware of?
I was wondering the same thing
@@garrettsmith2310 there is nothing but foam. The wire to the trolling motor is there but safe from a jig saw blade.
@@garrettsmith2310 there is also an extra wire for bow electronics ( or whatever) discovered it after I cut the hole in the deck
@@gregbrown4110 but for the most part of you center the tray, you should be good right? I’m going to order one for my classic xl I just want to make sure I get the right one and hook up drainage to it if needed. I appreciate the reply
@@garrettsmith2310 yes, right on the centerline. Mine was a Panther (something) from BassPro for $79.99. very sturdy. Very easy install.
Your trolling motor wiring should be ran on the opposite side of your graph wiring. That can cause interference a lot of the time. Hope that helps.
Unfortunately it’s not but I did a few things that have helped my interference a good amount, thanks for the info!
Where did ya get the carpet? And how much was it
lol only 14 bucks and i had a ton leftover... ordered it from Tracker parts in Mesa
Super mod! I want one too. How much weight did this add to your boat? How did he attach the marine plywood to the aluminum frame? Again great mod.
Thank you, maybe 40 pounds? I’m not sure honestly I’ll have to look
Was installing that recessed foot pedal a pain? How did you cut into the deck?
no, very easy... just make sure your measurements and lines are all straight and then use a jigsaw to cut it
@@VitalFishing I’m right in the middle of installing mine. And can’t for the life of me figure out where to run the drain line. The foam goes all the way to the hull. And not really wanting to just put water in the boat that won’t drain. Any help would be great! Lol thank you
How is it secured to the floor, nice job!
it wasnt, the weight of the deck was enough to keep it there. It would be better if it was bolted to the front deck though
How did you get that foot trolling tray installed since I noticed there is aluminum brace across or did you cut brace aluminum?
Mine didn’t have an aluminum brace there if I can remember right
How do you mount the troll pedal? I am in the middle of buying mine 2022 and Tracker told me they cant install one because of something with the boat frame or something?
Nah they definitely could, just look up a video of mounting a recessed tray. You’ll be fine!
Is your buddy still making these? Would love to buy one off him. I’m in east valley.
i keep telling him everyone wants one but he would rather fish on his off time... cant blame him lol
Who designed your deck? I would love to have that person build me one and I would but it and pay the shipping cost if it could be built to where I could assemble it myself to my boat. That deck is awesome.
Lol I keep telling my buddy he should sell them but he doesn’t want to 🤦🏻♂️
Nice set up. I have a similar tracker just older and also upgraded to a 24v trolling motor and would like to know your set up in the back with your batteries and fuel. Does having all 3 batteries on one side make you lean hard to that side?
no, i havent noticed a difference at all. the 24 volt system is night and day better
how did you wire up that 24 volt ? did you use the factory 8 awg from the rear ?
yes
Recent subscriber, awesome video and deck extension design! I recently got a used 2019 and as a bigger guy definitely need that additional room. Couple questions, did Dylan: A) Attach the extension directly to the boat or is it free to move around or take out? B) Total weight of the extension deck? C) Have any specs of the aluminum frame ? Thanks I’ll will certainly be trying to something like this on my rig. Good luck fishing!
thanks man... it is free floating so it can be taken out whenever... i would guess around 50 pounds... i don't as he did it all, i dont think he kept any records of measurement though
Brother I want this deck box. Let’s connect so I can enjoy my boat like you
Nice man! welcome to the zona!
Is the deck extender mounted to the boat? If so how? Great job!
Thank you, and no it just stays put without any screws or bolts
Do you build them for others and what would the cost be?
my buddy actually built it and unfortunately he doesnt build them for other people. He could have made a lot of money doing so lol
You should make it to where you can put your rods in there through the factory rod holes
that would be cool, sold the boat a few months back
Hi friend. What material did you put on the floor?
What do you mean? Carpet?
@@VitalFishing yes
@@VitalFishing it’s just carpet or some special material?
You said you can run in 10in of water. I live on the river I fish and am always worried about running wide open in 3ft of water. So my question is how do you go about running new water to check if it’s safe to run? Thanks. Get vid.
just go slow at first until you are familiar with the depth... hitting your prop on the ground at idling speeds usually won't do anything
Blueprints plz. I need this lol
What kind of sunglasses are those?
Natives! best sunglasses for the money ive found!
Hey bro, do Dillon have contact information to see if he can build me a extension for my classic XL?
Unfortunately he doesn’t want to do any haha… I’ve had a lot of people ask!
Oh okay, I understand appreciate you letting me know bro.
@@Fitthefight yessir, you could always ask him tho, he works at liars Korner
Where is that located?
mesa @@Fitthefight
I'd like to do something like that, but having the 36v trolling motor I think it would just be too heavy. Plus the open area is good for the kids and me and the woman have slept down there
I am actually running a 24 volt system currently... and yeah that extra space is nice if you have multiple people in the boat
do you know what hinges he use on the doors?
Piano hinges
Man if ya ain’t caught a forearm or wrist on those not cut off metal self tappers extending .75-1.25 inches on those new door jams I’d get a angle grinder and clean that up.
Lol I haven’t yet but I probably should do that
Willing to sell one
my buddy doesnt want to.. he should though!
Does that boat not have a rod locker
no
Yours doesn’t say XL on it. Is there a difference between the two? Classic XL vs. just Classic?
the classic xl is painted and the classic is not
How much will he charge to make the same thing?
unfortunately he doesnt want to make anymore
Nice! The extra deck space was great idea. I almost bought that boat last year, but then decided on the tracker pro 170 instead. Also, just found your channel and subbed. So, gonna go back and watch a bunch of your vids! Haha Check mine out if you want.
I will check it out when I get back home from my trip!
How much is that boat?
more than it used to be now... about 16 out the door as they keep raising the price
Great video: did he glue the carpet or just staple it? Where did you get your carpet and how did you match it? I’ve called my dealer twice and corporate once and nobody can give me the info to purchase. Thanks.
I don't know the other answers but the carpet for newer Trackers is 16oz cut pile boat carpet in the color Midnight Star Gray. You can buy it a million place online.
@@lifeoutdoors2day357 thanks, I’m seeing midnight star charcoal, you seem pretty confident, any chance you could send a link?
He is correct, I ordered mine from tracker parts and service
He glued it on top and stapled it
The best deck extender I’ve seen yet. I want him to build one for me. How Much? Thx
Would Dylan build me one and ship it to me?
i keep trying to get him to build some but hes to busy building his custom glide baits
3700
Would love Dylan's contact info - email is fine. Would like to have him do the same for my Bass Tracker.
unfortunately he is not looking to do any deck builds right now, hes working a lot of hours and wants to fish on his days off
@@VitalFishing well if he ever changes his mind he can email me at marieh216@hotmail.com. Or if he has plans he can send would be good too. Thank you
He made it look to east…
right lol
I’m being a little mean but if you had some organization in that you would have more room
lol all good.... i could definitely use some organization on that boat... but i would rather fish then organize my boat... thats my problem
You falling off the boat isn't the boat's fault. You really should make an apology video to Tracker for your clumsiness and ragging on their boat for your failure
lol what are you talking about dude
Lmfao @wade spruill be quiet you ken he’s speaking straight facts
How much will he do mine for? Or would he I should say I live in Tucson. Let me know and IL give you my number. It's the 2020 classic xl
Unfortunately he doesn’t want to do any
Ok thanks
What is Dillons business name and address??
I got family In surprise I just Visited From California ..... How bout you ( DYLON ) pre-fab a Kit and next time i come visit I'll drive the extra 40 miles and come pick it up 😎 LoL do you take VENMO --- No seriously 2021 Bass Tracker Classic XL ... Get'n FIshy NICE WORK 👊
He could make so much money if he went through with it but he is not interested in making them unfortunately
@@VitalFishing awe mannn LoL LoL ya mean ,,( there's not gonna be instructions saying ,,some assembly required shipping via Fed Ex ,,allow 3 to 6 weeks for delivery ) 🤣🤣🤣 Thanks for Sharing your Video It looks AWESOME 👊 I'll be tackeling my project soon 2021 Black Tracker Classic XL 50 hp