I have been waiting to use my xp15000 for two years and couldn't find a conversion. I have regular ink in now can I still convert? Can you include the parts and software needed to purchase for the Epson xp15000?
Hi, you mentioned that the white ink was not printing at all. I am suffering the same issue, and I have also dropped DTF liquid into the printhead to try and fix it, but it has still not been fixed. You say you left it soaking for 20 minutes? Does that mean you dropped the liquid into the printhead and let it stay like that for 20 minutes? So far I've been dabbing it with DTF cleaning liquid, swabbing, and then proceeding.If that doesn't work, what else would you suggest? Thank you.
Great video! Thanks for sharing. Removing the tray appears ideal, but my concern is stability with large prints. Wouldn't you need some sort of a platen/vacuum table to prevent ink-streaks? Common issues with L805 & L1800 where streaking appears at the end of the print, 1-3 inches from the edge.
Yes, a platen won't hurt, however I have not personally had any problems with this printer either because of the shape of the tray or the film thickness that I've used. If this becomes a problem, even a piece of cardboard will do the trick.
Hi! I set up all the instructions in this video and I've downloaded the Rip Software, but the software is very confusing. How do I get that white underbase? What settings should I have? The "Set Ink Order" is grayed out, do you know how to fix that so I can tell the printer my Red and Gray cartridges are now White? As it is, I am printing out the pictures, but it does not have that white underbase and is very difficult to heat press into the items, usually ending up half-pressed or such. Colors loook great though. Would love the help. Thank you!
Hey, I tried to this with the same exact printer that you used, when I put a DTF sheet, It went through, ready to print, but right as it was about to print it stopped and an error showed up saying the printer was jammed. When I checked to see if there was a jam in the printer it was perfectly fine. I’ve tried with regular printer paper to see if the printer would not print anything or if it was just that printer. When I tried with the plain paper it printed perfectly. Do you know how to fix this to print on the DTF sheet?
Yes, this printer suffers from the feeding issues and can be difficult. There is a video on this channel which goes through some film feeding tips. For a different printer but the process is quite similar.
Good video~ I have a question about the part to remove the pizza wheel. On the screen, the parts connected to the gear on the right part (the pizza wheel connected) and the wire spring connected to the part connected to the right gear are connected to each other. How do I separate this part?
Could you be so kind and explain how you are performing daily maintenance with xp15000? What are you doing at the beginning of the day and at the end of day with this printer?
This is not my daily driver. We run an L1800 print farm. I picked up a few printers just to film a few tutorials and experiment. Having said that, I'm still trying to keep this printer functional so it goes through standard daily maintenance we carry out on all of our printers. Shake the white ink before printing or every 2 days when idle (I extract the ink and shake it inside the cyringe). Make sure to print something every 2 days or do an automatic head clean. That's it.
Thank you for all the replies. Great info on the xp 15000 all in one place. I really want to do black polyester shirts because they are softer and not as hot as cotton. Can dtf work for black 50/50 or does it have to be only 100 cotton? Also, if i wanted to flush the dtf ink and put in sublimation ink for white shirts would that work? Appreciate the info.
There is no ink recognition system in place. Your printer can't tell what liquid you put in it. I don't know what you mean by not recognising white ink.
@@dtfprintingtechnology9457mine won't print white what so ever!! If I select the image and select white underbase for color it still won't recognize it
HI there I have a brand new printer xp15000 it prints all colours but white I have done the head cleans and replaced the cartridges still no white any ideas
I think I have watched every video. Program is not working with my printer. Any subjection would be much appreciated. I already had my printer running the chipless firm ware. It is a epson xp15000.. I have already converted the printer. I purchased dtg 10.3 version with a dongle key. No problem installing the program. No problem setting all the settings. The program send the print. The print shows up on the print queue. Printer doesn’t print. Also have an artisan 1430 tryed also the same resort. Thanks you for any help you can offer.
Thanks for the video! Have you figured out any work around for bypassing the waste ink tank? Also, since filming this have you noticed more clogging versus other printers (like the L1800) due to the sponge vs spring cartridges? As that seems to be what everyone is saying is bad about using this printer.
Have not really had the time to do much with this printer. Clogging seems fine still. Currently focusing on launching our own branded printer with all the bells and whistles.
How do I change the new cartridges setup ? I need to add 2 whites… In the printer setting or part of the RIP ? Thanks I’m using Cadlink and seems to have soooo much information.
Sometimes you can do it in any order and configure each colour in your rip software or do it according to a rip software preset. Get in touch with cadlink to get a precise answer. I can't remember which options they had. We don't use cadlink.
Hi. Thanks for sharing this video. What I do not understand is why it is necessary to use rip software? Would the printer stop running only by unscrewing this metal thing?
How is your printer suppose to ignore 2 colours while only printing CMYK and applying white on top as a second layer without rip software? Printers can't do that out of the box sadly. No, it won't stop running. I would not have removed that metal thing if it was to break the printer.
I have done what so many on youtube say to do yet my photos dont come out as clear as this, the ink is blotchy and the white is not as nice as this, what settings did you use on the rip program ?
I used EKrip. ICC is specific to our ink. Have not tried acrorip yet but I'll need to try and revive this printer some time as it's been sitting unused for months. Would be a good experiment to see if the print head is still functional.
We never used it properly. Just converted it for the video. The foam cartridges, feeding issues and a sensitive printhead are problematic but it's probably the cheapest printer you can convert.
@@ux_ui Image quality is pretty much the same on every printer. P600 will print a lot faster than L1800. All depends on how many prints you are doing per day. I'd skip L1800 if it's over 20 A3 sized prints.
With eco-solvent inks, i can print labels on adhesive polypropylene? Is a heat source essential for drying? or can it dry at room temperature? what software use to print roll? (acrorip or another?) thanks!
I have no idea about eco-solvent inks. DTF ink is water based. Yes, heat source is essential. You are melting the powder. You are not drying it. We use acrorip.
mein freund ich habe die Acro Rip 10 Version gekauft. aber es geht einfach nicht :( was kann der grund sein ???? was mache ich falsch ?? er zieht nicht A3 blatt rein. nur von unten die A4 Grösse von Blatt zieht er rein
I got it chipless so that I can use a CISS but I can’t get Acrorip 10 to communicate with the printer. What RIP did you use for this?and if Acrorip 10 what settings?
Ok you say that it doesnt accept film or transparencies while you are printing on film. I cant get this printer to recognize film at all in anyway. It just pushes it straight through and says "Out of paper" any info on this would be fantastic. Im using EKrip
@@theguythatdoesthatonething2133 I just received my XP 15000 getting ready to convert. @irondesign (youtube channel) uses supplies from dtf-superstore as well, so I'm guessing it's not the paper. I remember seeing someone mentioning the paper setting, let me see if I can find it. I will get back to you shortly. Btw how much did you pay for your rip?
@@user-jg4ci4mf8w I bought Acrorip 10 when it came out and it’s absolute garbage. I paid $400 for it. I have EKrip too and it’s ok but pricey for what you get. I appreciate any info about the paper problem you can give me.
I have done everything just like you said. I bought the chip less firmware installed successfully. However my printer says ink is full yet will NOT PRINT. What do I do?
@@dtfprintingtechnology9457 Hello, I am having the same problem but after installing chipless software, my printer started to print blank page. Any help?
Epson does everything in their power to stop people from using ink that was not made by epson because this how they make the most money. So you need to install another set of ink cartridges that are refillable. Espon does not make them. Other companies do. A CISS for xp-15000 will be available here soon: www.dtf.technology/
@@dtfprintingtechnology9457 it say the cartridges are not installed correctly it’s only reading the original cartridges when I try to install the refillable ones it gives that error
@@missyj3890 Have you installed chipless firmware on the printer or do you use refillable cartridges with chips that can be reset? The printer is designed not to accept 3rd party cartridges.
@@dtfprintingtechnology9457 yes o have tried I got the firmware from ink chip but I’m not sure if mi doing it correctly because when I try to update it on the printer it won’t install it
You can fill it up with whatever ink you like after making it chipless and by using refilable cartridges but I have no idea whether it will work with eco solvent.
Should be same as here: th-cam.com/video/sAoKsT3ZrfY/w-d-xo.html&lc=UgyZTAfWLGp7ZLBqePJ4AaABAg just need to pick the right printer and ink channels. I've mostly used EKrip for xp-15000 personally so I can't give you exact settings. Also, makes ure to use acrorip 10.
@@dtfprintingtechnology9457 Hello friend, my question is with the acrorip if I placed the l1390 the ink channel order is YKWWMC and in this printer it does not have that order I see that you place the two whites cyan and then the rest but if you adjust the color order does not match
@@Ajfebles It's because I'm using EKprint and it allows you to select any order you like in software. If you are converting L1390 with acrorip 9 you will need to make sure your ink order is correct YKWWMC
@@dtfprintingtechnology9457 example. I can in the epson xp 15000 manually change the order of the inks in the printer and adjust it to acrorip or that does not work
@@Ajfebles The cartridges only fit the corresponding colour. So black cartridge will only go into black slot. But you can fill them with any colour in any order you need. So you can put black cartidge into the black slot and fill it with white ink or yellow in or whatever ink you need.
Thinking of going this route I have a white toner printer and the cost of paper A+B is just insane in price my question is how hard is the mantience for this I run a small t shirt buisness so I might not print for like 5 days
5 days is fine. Anything over a week is pushing it. You can just run a quick head clean every 3 days or so to prevent clogging. White toner is just trash in general for t-shirts. Customers kept on returning their orders because they would not even survive a couple of washes. DTF or DTG is the way to go.
@@nergaldj9346 Ink level 2, ink density 100, bi directional printing selected, ink drop size light, color mode graphics. This is what was used for this video. This may not be the ideal settings because we don't actually print on xp-15000s ourselves.
Have you encountered any clogs with the white channels and how would you power-flush those channels like you would on a regular manifold/cartridge design?
Yes, I have after 1 month of inactivity white channels got completely clogged up and I was able to revive them by soaking them in cleaning solution. Power flush is difficult. I have not figured out a way to do that yet.
@@dtfprintingtechnology9457 I have wondered if maybe could pressurize a cartridge with cleaner using a syringe? I guess I'll never know because I sold the printer because Cadlink doesn't support it. Not buying more software!! It was going to be an addition to my R1400...
@@dtfprintingtechnology9457 Wouldn't it be impossible to power flush since the cartridges contain foam filters? You would only be able to flush dampers if im not mistaken and even the cis systems for this printer use foam in the cartridges.
Im trying to get the printer to work. Unfortunately without success. the print looks weird. as if my dtf ink would run and lots of small holes in the white. did you have the same problem?
@@AE-uj7qc Try printing a different design. This could be rip software not printing semi transparent elements properly or messing up the choke. Also, keep an eye on the printer while it's printing. Maybe you can spot some sort of mechanical issue.
@@dtfprintingtechnology9457 There are no mechanical problems either, it just prints a horribly bad image as normal. I must have put 50 dtf film through the printer with the most varied of designs and settings. It worked best when I set 90 nozzels, but then it was still extremely bad.
Can someone please tell what paper i need to choose in the printer preferences that will allow this printer to see an A3 DTF transfer? It keeps saying paper jammed inside the printer no matter what A3 transfer i put in from any company. It feeds in fine, the print head goes to the middle and then returns and docks as though its not seeing the paper. Any help would be great. Im using acro 10 btw
Hi, I converted my 15000, however I cannot get the printer to acknowledge that there is paper in the printer. What settings do you use (or what paper) do you select from the paper menu on the printer?
I can’t get Acrorip 10 to speak to it. But then Acrorip 10 is really janky I’m finding. I have the chipless solutions all worked out but just can’t get it to print. It’s a very strange unit and has a ton of quirks from what I’ve seen
Hi, i have a question.. Do you recomend to use Epson converted to DTF o to use a printer DTF from fabric? What is life time of Epson converted to DTF printer? Thank for your response..
They are the same thing and use same print heads that have the same lifetime. It's just factory made DTF printers tend to have extra features and are converted professionally. If you look after your printer and carry out proper maintenanse, it will last years.
@@dtfprintingtechnology9457 a important feature is white circulation system. Epson doesn’t have it and have shake it myself (colors tank) or I am wrong?
your ink that i bought from your website this nanodroplet is not working at all i did everything correctly but ink didn't print at all at dtf sheets and even on white paper is blank all the time when i go to original ink epson printer working perfectly
Of course it's not going to print. You were just in touch with us saying you loaded up epson ink first and then added DTF ink without cleaning the old ink out first. You can't mix 2 different types of ink. Solven, sublimation, water based inks etc. should not be mixed.
You can use pretreatment instead of powder but then you might as well go with DTG because all you are doing is overcomplicating DTG printing to achieve worse results.
@@dtfprintingtechnology9457 I have another question. Since you are changing the Red and Gray ink, with the white, what happens when there is Red and/or Gray in the design? How do you get the printer to blend the other colors to make the Red and Gray? Also, how do you apply the white, to the back of the design?
@@aeentertainment5149 Most printers only CMYK and make all the colours by mixing those. Your monitor only has green, red and blue yet it can display millions of colours. So grey and red are not needed. They are only added to enchace some photos. RIP software does all the work and prints white on the back.
@@dtfprintingtechnology9457 right ,didnt really think of that haha. I acutally got a couple of questions if you dont mind answering, I am actually planing to get a DTF printer from alibaba next week its called etamaster l1800 ,do you have any thoughts on those modified printers from china? do these printer last a long time? I want to do about 20-30 prints a day for my business. what is the maintenance like for these modified printers apart from shaking the ink and doing cleaning, are the printer heads long lasting or should I buy a couple extra in case something happens?
Das Video sagt, dass Acrorip 9 dafür nicht funktioniert und Sie EKrip oder eine andere aktualisierte Rip-Software benötigen. th-cam.com/video/nhIw0MTNKKQ/w-d-xo.html Wir verkaufen EKrip für £ 350.
@@44kuzum Es ist sehr teuer. Ich weiß nicht warum. Aber Sie werden keine andere Rip-Software finden, die billiger ist. Einige kosten mehr als 5000 US-Dollar. Acrorip 9 ist billig, weil es sehr alt ist und keine neuen Drucker unterstützt. Wir machen diese Software nicht, also berechnen wir, was uns erlaubt ist. Recherchiere. Wenn Sie etwas billiges finden, das mit Epson 15000 funktioniert, würde ich es auch gerne wissen.
@@dtfprintingtechnology9457 das ist sehr teuer. Verstehe nicht wieso so viel Geld :) dann lohnt sich das doch alles nicht. Software teuer, Farbe teuer, Material was man braucht ist teuer. Was soll ich hier noch verdienen bitte ? Danke :)
@@44kuzum Dies ist die billigste Methode für den Druck von Hemden aus 100% Baumwolle. Sie können ein Shirt für nur 2 Euro drucken. Wenn Sie einen günstigeren Weg finden, lassen Sie es mich wissen.
@@rubenagurcia906 Eventually the waste ink tank (Maintenance box) will fill up. You will need to replace it. You will need to either empty it and reset the chip with a chip resetter, buy a cheap knockoff one or buy an expensive original.
If you upgrade to chipless firmware you can. Otherwise printer will count how much ink it used and will ask you to replace the cartridges. Cartridges themselves don't measure ink levels. Printers calculates it based on how much you printed.
Hi ... If use acro 9 with xp-15000 and change the order of colors can work use other printer profile? In My country it's impossible to Buy some rip soft. Many thanks and great channel
Overall it sounds like the negatives of needing newer RIP software, CIS, customizing of the paper feed and ink waste tank might offset the savings of this printer vs a more expensive model. What's your opinion?
I only bought this printer for testing. Never really considered it for long term printing because of the reasons you mentioned. I know a few people who have been using it for a while and are still happy with performance but I'd personally stick to older models.
@@dtfprintingtechnology9457 yeah I watched another video of someone who has been using it as a daily driver for dtf and got all my answers. No one in their right mind should use this thing for any size production run in a serious business. It's way too finicky and prone to failure.
@@TheXboxSux I see you’ve commented on many videos regarding dtf printers. I’m new to the idea of them, what would you suggest for a business getting 25-50 custom short run orders per week?
which printer is better to modify between l1800 and xp1500? pros and cons of the 2 models, rip, maintenance, print quality etc etc
Interested too
Same
Me too
L1800 does it still come like new ?
15000 is a nightmare
Can you list the programs that are compatible with that printer? please
I have been waiting to use my xp15000 for two years and couldn't find a conversion. I have regular ink in now can I still convert? Can you include the parts and software needed to purchase for the Epson xp15000?
can you share you ekprint setting i cant get my white underbase to print
Hi, you mentioned that the white ink was not printing at all. I am suffering the same issue, and I have also dropped DTF liquid into the printhead to try and fix it, but it has still not been fixed. You say you left it soaking for 20 minutes? Does that mean you dropped the liquid into the printhead and let it stay like that for 20 minutes? So far I've been dabbing it with DTF cleaning liquid, swabbing, and then proceeding.If that doesn't work, what else would you suggest? Thank you.
Great video! Thanks for sharing.
Removing the tray appears ideal, but my concern is stability with large prints.
Wouldn't you need some sort of a platen/vacuum table to prevent ink-streaks?
Common issues with L805 & L1800 where streaking appears at the end of the print, 1-3 inches from the edge.
Yes, a platen won't hurt, however I have not personally had any problems with this printer either because of the shape of the tray or the film thickness that I've used. If this becomes a problem, even a piece of cardboard will do the trick.
@@dtfprintingtechnology9457 thanks 👍
Hi! I set up all the instructions in this video and I've downloaded the Rip Software, but the software is very confusing. How do I get that white underbase? What settings should I have? The "Set Ink Order" is grayed out, do you know how to fix that so I can tell the printer my Red and Gray cartridges are now White? As it is, I am printing out the pictures, but it does not have that white underbase and is very difficult to heat press into the items, usually ending up half-pressed or such. Colors loook great though. Would love the help. Thank you!
Thank you for the video, question how about the quality of dtf?
Quality will depend on your consumables. Visually all the printers are quite similar.
Have you tried converting a Epson 8550? If so, how did it go?
Nop
Hey, I tried to this with the same exact printer that you used, when I put a DTF sheet, It went through, ready to print, but right as it was about to print it stopped and an error showed up saying the printer was jammed. When I checked to see if there was a jam in the printer it was perfectly fine. I’ve tried with regular printer paper to see if the printer would not print anything or if it was just that printer. When I tried with the plain paper it printed perfectly. Do you know how to fix this to print on the DTF sheet?
Yes, this printer suffers from the feeding issues and can be difficult. There is a video on this channel which goes through some film feeding tips. For a different printer but the process is quite similar.
Good video~ I have a question about the part to remove the pizza wheel.
On the screen, the parts connected to the gear on the right part (the pizza wheel connected) and the wire spring connected to the part connected to the right gear are connected to each other. How do I separate this part?
Hi brother you use acro rip software for printing and which printer need to select can you help me
No, I used EKrip. Acrorip 9 does not work with xp-15000.
Could you be so kind and explain how you are performing daily maintenance with xp15000? What are you doing at the beginning of the day and at the end of day with this printer?
This is not my daily driver. We run an L1800 print farm. I picked up a few printers just to film a few tutorials and experiment. Having said that, I'm still trying to keep this printer functional so it goes through standard daily maintenance we carry out on all of our printers. Shake the white ink before printing or every 2 days when idle (I extract the ink and shake it inside the cyringe). Make sure to print something every 2 days or do an automatic head clean. That's it.
Thank you for all the replies. Great info on the xp 15000 all in one place. I really want to do black polyester shirts because they are softer and not as hot as cotton. Can dtf work for black 50/50 or does it have to be only 100 cotton? Also, if i wanted to flush the dtf ink and put in sublimation ink for white shirts would that work? Appreciate the info.
DTF should work with all fabrics. Yes, if you flush the old ink out, you can replace it with sublimation ink.
So no special software to use it?? Like Cadlink??
You still need rip software for every printer
Hi, my epson xp15000 printer isn't recognizing white ink. Could you please help me with any recommendations?
There is no ink recognition system in place. Your printer can't tell what liquid you put in it. I don't know what you mean by not recognising white ink.
@@dtfprintingtechnology9457mine won't print white what so ever!! If I select the image and select white underbase for color it still won't recognize it
Hello great video .. did you do any mods for the ink tank yet.. any videos on that … thanks
Thanks for the reply.
That was fast.
HI there I have a brand new printer xp15000 it prints all colours but white I have done the head cleans and replaced the cartridges still no white any ideas
Hi, Great video, Wondering which 3rd party you recommend for purchasing the refillable ink cartridges from?
They will be up for sale here within a day or 2 www.dtf.technology/
Does it work with rip program called cadlink?
Hi DFT Printing Technology, How the Epson XP_15000 as far as DTF printing is going. can you still print good with it?
I think I have watched every video. Program is not working with my printer. Any subjection would be much appreciated. I already had my printer running the chipless firm ware. It is a epson xp15000.. I have already converted the printer. I purchased dtg 10.3 version with a dongle key. No problem installing the program. No problem setting all the settings. The program send the print. The print shows up on the print queue. Printer doesn’t print. Also have an artisan 1430 tryed also the same resort. Thanks you for any help you can offer.
Thanks for the video! Have you figured out any work around for bypassing the waste ink tank? Also, since filming this have you noticed more clogging versus other printers (like the L1800) due to the sponge vs spring cartridges? As that seems to be what everyone is saying is bad about using this printer.
Have not really had the time to do much with this printer. Clogging seems fine still. Currently focusing on launching our own branded printer with all the bells and whistles.
@@dtfprintingtechnology9457 any updates?
I have Acrorip software and refillable cartridges.
will i still need to download the chipless software ?
Thanks.
Do I see 2 white cartridges?
Yes
Do you have to pay additional to print on DTF Film??
I can't get mine to print white do you know what I might be doing wrong?
Can you do wf-2110 please
It's not suitable for DTF.
WHAT RIP SOFTWARE WOULD I NEED FOR THIS PRINTER WILL IT RUN ON ACCURIP 9
No, it won't. You will need acrorip 10+
How much EKrip and where it's available
Chal pda na
Which program do you use for print?
How do I change the new cartridges setup ?
I need to add 2 whites…
In the printer setting or part of the RIP ?
Thanks
I’m using Cadlink and seems to have soooo much information.
Sometimes you can do it in any order and configure each colour in your rip software or do it according to a rip software preset. Get in touch with cadlink to get a precise answer. I can't remember which options they had. We don't use cadlink.
Can you do another video please and show us how it print with big print and is it running well with you untill now without any Problems
Thank you
Hi. Thanks for sharing this video. What I do not understand is why it is necessary to use rip software? Would the printer stop running only by unscrewing this metal thing?
How is your printer suppose to ignore 2 colours while only printing CMYK and applying white on top as a second layer without rip software? Printers can't do that out of the box sadly. No, it won't stop running. I would not have removed that metal thing if it was to break the printer.
How did you add your art
You need rip software such as cadlink or acrorip 11
I GOT ONE BUT IS NOT PRINTING AT ALL? HELP PLEAE
Did you remove the caps from the cartridges?
Very informative thank you.
what's the ekprint set up for channel ink?
I have done what so many on youtube say to do yet my photos dont come out as clear as this, the ink is blotchy and the white is not as nice as this, what settings did you use on the rip program ?
Are you printing on the correct side of the film?
Well done. Are you using a specific icc color profile when printing and what are your settings in acrorip?
I used EKrip. ICC is specific to our ink. Have not tried acrorip yet but I'll need to try and revive this printer some time as it's been sitting unused for months. Would be a good experiment to see if the print head is still functional.
Amazing video... Would you still recommend this printer for DTF after 2 years of using it? Thanks you all of your help!
We never used it properly. Just converted it for the video. The foam cartridges, feeding issues and a sensitive printhead are problematic but it's probably the cheapest printer you can convert.
@@dtfprintingtechnology9457 thanks for the response...
@@dtfprintingtechnology9457 l1800 will be the best choice for professional dtf printing? in terms of price quality? Thenk you.
@@ux_ui Image quality is pretty much the same on every printer. P600 will print a lot faster than L1800. All depends on how many prints you are doing per day. I'd skip L1800 if it's over 20 A3 sized prints.
@@dtfprintingtechnology9457 thank you 🙏🏼
I’m looking at following your steps with an L1800. Do I need a specific software to print the white base on top of my colours?
Yes, acrorip
Does the printer come with the ink needed to print the shirt or do I have to buy a different ink
You need to buy DTF ink
With eco-solvent inks, i can print labels on adhesive polypropylene? Is a heat source essential for drying? or can it dry at room temperature? what software use to print roll? (acrorip or another?) thanks!
I have no idea about eco-solvent inks. DTF ink is water based. Yes, heat source is essential. You are melting the powder. You are not drying it. We use acrorip.
mein freund ich habe die Acro Rip 10 Version gekauft. aber es geht einfach nicht :( was kann der grund sein ???? was mache ich falsch ?? er zieht nicht A3 blatt rein. nur von unten die A4 Grösse von Blatt zieht er rein
I got it chipless so that I can use a CISS but I can’t get Acrorip 10 to communicate with the printer. What RIP did you use for this?and if Acrorip 10 what settings?
I used EKrip. Have not tried Acrorip 10 with this one yet.
Hi
What's the latest version Epson printer with ecotank system and can convert to DTF? I am in Ireland and can't find the L805/L1800
Thanks
ET-8500 and ET-8550 but they are quite different with some added challenges
Can we do it in xp 960
Hola, muy buen video, tiene el link del software mas apropiado para este modelo xp15000?
Buscar acrorip 10
Ok you say that it doesnt accept film or transparencies while you are printing on film. I cant get this printer to recognize film at all in anyway. It just pushes it straight through and says "Out of paper" any info on this would be fantastic. Im using EKrip
Hey Cris did you figure this issue out yet? Where did you buy your film from?
@@user-jg4ci4mf8w no I’ve not figured it out and I get it from dtfsuperstore
@@user-jg4ci4mf8w I am open to any suggestions because I’m about ready to chunk it in the trash :)
@@theguythatdoesthatonething2133 I just received my XP 15000 getting ready to convert. @irondesign (youtube channel) uses supplies from dtf-superstore as well, so I'm guessing it's not the paper. I remember seeing someone mentioning the paper setting, let me see if I can find it. I will get back to you shortly. Btw how much did you pay for your rip?
@@user-jg4ci4mf8w I bought Acrorip 10 when it came out and it’s absolute garbage. I paid $400 for it. I have EKrip too and it’s ok but pricey for what you get. I appreciate any info about the paper problem you can give me.
I have done everything just like you said. I bought the chip less firmware installed successfully. However my printer says ink is full yet will NOT PRINT. What do I do?
Try printing a bit of text on a normal office paper without using rip software. Does it print?
@@dtfprintingtechnology9457 Hello, I am having the same problem but after installing chipless software, my printer started to print blank page. Any help?
Can i use original cartridge??
So basically I’ll just fill the empty ink cartridges with ink, and remove the print head. That’s it?
Can you tell us what the 3rd party refillable ink cartridges are?
Epson does everything in their power to stop people from using ink that was not made by epson because this how they make the most money. So you need to install another set of ink cartridges that are refillable. Espon does not make them. Other companies do. A CISS for xp-15000 will be available here soon: www.dtf.technology/
Hi I am trying to do the conversation but it keeps giving me a maintenance error for cartridges
What's a cartridge maintenance error? Do you have an error code?
@@dtfprintingtechnology9457 it say the cartridges are not installed correctly it’s only reading the original cartridges when I try to install the refillable ones it gives that error
@@missyj3890 Have you installed chipless firmware on the printer or do you use refillable cartridges with chips that can be reset? The printer is designed not to accept 3rd party cartridges.
@@dtfprintingtechnology9457 yes o have tried I got the firmware from ink chip but I’m not sure if mi doing it correctly because when I try to update it on the printer it won’t install it
@@missyj3890 So that's your problem. The firmware install can be tricky. Once you install it correctly the errors will go away.
I put in third party ink cartridges and I get: maintenance error. Ink Cartridge is not installed correctly. Can you tell me the steps to fix this?
Did the cartridges come with a chip? You either need cartridges with a chip and a resetter or you need to flush the printer to chipless firmware.
Thank for the video can i convert this printer to eco solvent printer ?
You can fill it up with whatever ink you like after making it chipless and by using refilable cartridges but I have no idea whether it will work with eco solvent.
With only two whites how does it do on a black T-shirt is it very opaque thank you in advance
You can see how the white turns out on this video. DTF transfers are never 100% opaque however. Even DTG often uses 2 coats of white for best results.
Tell me please Acrorip Settings For Epson XP-15000 Printer. Thanks
Should be same as here: th-cam.com/video/sAoKsT3ZrfY/w-d-xo.html&lc=UgyZTAfWLGp7ZLBqePJ4AaABAg just need to pick the right printer and ink channels. I've mostly used EKrip for xp-15000 personally so I can't give you exact settings. Also, makes ure to use acrorip 10.
@@dtfprintingtechnology9457 Hello friend, my question is with the acrorip if I placed the l1390 the ink channel order is YKWWMC and in this printer it does not have that order I see that you place the two whites cyan and then the rest but if you adjust the color order does not match
@@Ajfebles It's because I'm using EKprint and it allows you to select any order you like in software. If you are converting L1390 with acrorip 9 you will need to make sure your ink order is correct YKWWMC
@@dtfprintingtechnology9457 example. I can in the epson xp 15000 manually change the order of the inks in the printer and adjust it to acrorip or that does not work
@@Ajfebles The cartridges only fit the corresponding colour. So black cartridge will only go into black slot. But you can fill them with any colour in any order you need. So you can put black cartidge into the black slot and fill it with white ink or yellow in or whatever ink you need.
Thinking of going this route I have a white toner printer and the cost of paper A+B is just insane in price my question is how hard is the mantience for this I run a small t shirt buisness so I might not print for like 5 days
5 days is fine. Anything over a week is pushing it. You can just run a quick head clean every 3 days or so to prevent clogging. White toner is just trash in general for t-shirts. Customers kept on returning their orders because they would not even survive a couple of washes. DTF or DTG is the way to go.
Do you use the stock ink that comes with the printer? Or did you add white ink?
You have to use DTF ink. It's rubberised fabric ink that will feel soft and will stretch on fabric.
@@dtfprintingtechnology9457 thank you
Can you show the settings you use on the EKprint ?
I have already posted them as a reply to one of the comments here. Please dig around, they should be here somewhere.
what software do you recommend for dtf on the epson xp 15000
I only tested it with EKrip.
Ok thank you, could you tell me the configuration, since I have ekrip but I get too much ink and the images do not come out correctly
@@nergaldj9346 Ink level 2, ink density 100, bi directional printing selected, ink drop size light, color mode graphics. This is what was used for this video. This may not be the ideal settings because we don't actually print on xp-15000s ourselves.
Hello I have a question I have the the R1900 is it the same process of converting thanks in advance
R1900 would be similar to L1800. Please watch my other video for L1800.
Wich software?
Acrorip 11
Have you encountered any clogs with the white channels and how would you power-flush those channels like you would on a regular manifold/cartridge design?
Yes, I have after 1 month of inactivity white channels got completely clogged up and I was able to revive them by soaking them in cleaning solution. Power flush is difficult. I have not figured out a way to do that yet.
@@dtfprintingtechnology9457 I have wondered if maybe could pressurize a cartridge with cleaner using a syringe? I guess I'll never know because I sold the printer because Cadlink doesn't support it. Not buying more software!!
It was going to be an addition to my R1400...
@@dtfprintingtechnology9457 Wouldn't it be impossible to power flush since the cartridges contain foam filters? You would only be able to flush dampers if im not mistaken and even the cis systems for this printer use foam in the cartridges.
@@TheXboxSux Pretty much, yes. You'd need some sort of custom attachemnt for the flushing.
Im trying to get the printer to work. Unfortunately without success. the print looks weird. as if my dtf ink would run and lots of small holes in the white. did you have the same problem?
Seems like either you are printing on the wrong side of the film or there is some sort of film defect.
@@dtfprintingtechnology9457 unfortunately not, the film works without problems in my Epson 1500w.
@@AE-uj7qc Try printing a different design. This could be rip software not printing semi transparent elements properly or messing up the choke. Also, keep an eye on the printer while it's printing. Maybe you can spot some sort of mechanical issue.
@@dtfprintingtechnology9457 There are no mechanical problems either, it just prints a horribly bad image as normal. I must have put 50 dtf film through the printer with the most varied of designs and settings. It worked best when I set 90 nozzels, but then it was still extremely bad.
How do you set up the with to print on top of the other colors?
You need special rip software such as EKrip or acrorip 10+
@@dtfprintingtechnology9457 thank you
do you have to run a print with the oem carts first?
No
If I use a CISS do I need a chip re setter?
Yes, you either need a chip resetter, chipless firmware or CISS that has a button to reset the chip.
Can someone please tell what paper i need to choose in the printer preferences that will allow this printer to see an A3 DTF transfer? It keeps saying paper jammed inside the printer no matter what A3 transfer i put in from any company. It feeds in fine, the print head goes to the middle and then returns and docks as though its not seeing the paper. Any help would be great. Im using acro 10 btw
add a strip of tape across the back of the paper's top edge
would this be better than a Epson R2000 converted for dtf???
I'd go with R2000
Hi, I converted my 15000, however I cannot get the printer to acknowledge that there is paper in the printer. What settings do you use (or what paper) do you select from the paper menu on the printer?
I can't remember what I did but I had to chose the back paper feed option in the printer menu settings. I remember it being confusing too.
Did you figure this out? Please help!! It keeps going from the cassette but it’s nothing there. Help if possible thanks
What kind of ink is used? Do you used what comes with the printer?
You need special nanodroplet DTF ink.
Hello, question, i have this printer and I want to convert it to dtf.. can this printer print from roll?
All printers can print from the roll. You just need a roll holder and either roll printing software or rip software that supports roll printing.
@@dtfprintingtechnology9457 great to know.. can I contact you if I want to know something more in process?
Epson has high capacity ink cartridges. Why not use empty high capacity genuine cartridges?.
Use whatever cartridges or CISS you like
Is that the same as the epson stylus photo 1500w?
No it's not
Hi, is it possible to convert pigment to dtf?, I have epson L120..thanks
Where do you plan on putting the white ink if you only have 4 colours? L120 is not going to work.
I am in Australia and the xp 15000 is inkjet is that right I want to convert to dtf if possible let me know?
Yes it is but be prepapred to troubleshhot chipless firmware and film feeding issues. Those are common problems people experience with this printer.
hello I can't get my Cyan to print? any suggestions?
Is it clogged?
@@dtfprintingtechnology9457 I change the cyan cartridge and it worked. Possibly clogged? Not certain. Thank you for replying!
Can I still print normal photos on paper ( glossy or matte) after this process??
Yes but they won't be as good because you sacrifised 2 colours to white.
I can’t get Acrorip 10 to speak to it. But then Acrorip 10 is really janky I’m finding. I have the chipless solutions all worked out but just can’t get it to print. It’s a very strange unit and has a ton of quirks from what I’ve seen
Hi, i have a question.. Do you recomend to use Epson converted to DTF o to use a printer DTF from fabric? What is life time of Epson converted to DTF printer? Thank for your response..
They are the same thing and use same print heads that have the same lifetime. It's just factory made DTF printers tend to have extra features and are converted professionally. If you look after your printer and carry out proper maintenanse, it will last years.
@@dtfprintingtechnology9457 a important feature is white circulation system. Epson doesn’t have it and have shake it myself (colors tank) or I am wrong?
Would this be better then the L1800?
No
your ink that i bought from your website this nanodroplet is not working at all i did everything correctly but ink didn't print at all at dtf sheets and even on white paper is blank all the time when i go to original ink epson printer working perfectly
Of course it's not going to print. You were just in touch with us saying you loaded up epson ink first and then added DTF ink without cleaning the old ink out first. You can't mix 2 different types of ink. Solven, sublimation, water based inks etc. should not be mixed.
Do you have to use DTF Powder?
You can use pretreatment instead of powder but then you might as well go with DTG because all you are doing is overcomplicating DTG printing to achieve worse results.
@@dtfprintingtechnology9457 so powder is the way to go?
@@aeentertainment5149 Yes
@@dtfprintingtechnology9457 I have another question. Since you are changing the Red and Gray ink, with the white, what happens when there is Red and/or Gray in the design? How do you get the printer to blend the other colors to make the Red and Gray? Also, how do you apply the white, to the back of the design?
@@aeentertainment5149 Most printers only CMYK and make all the colours by mixing those. Your monitor only has green, red and blue yet it can display millions of colours. So grey and red are not needed. They are only added to enchace some photos. RIP software does all the work and prints white on the back.
Hi can i use for dtf with out clipless software?
You can't
can i use epson l1800 without doing this for printing on transfer film ?? plz answer me ASAP 🙏🙏
Without doing what? Converting the printer for DTF? No, you can't.
@@dtfprintingtechnology9457
i mean without remove that rollers !! Well, what if I return it, will it work as a normal printer or not?
@@aymenlegendb1942 If you remove the rollers the printer will still work as a normal printer but those rollers prevent paper jams etc.
@@dtfprintingtechnology9457
if can work why to remove rollers ?? we can print on transfer paper !
@@aymenlegendb1942 Because rollers will roll straight over the wet ink you just printed, leaving marks and smudges.
Is this printer faster than L1800 ??
Yes it is
Can I use my xp640
Nop
What's the driver in Acrorip for this printer?
Acrorip 9?
@@dtfprintingtechnology9457 Yes.
@@malmo54 It's not compatible. There are no drivers. You need to use acrorip 10 or ekprint studio
@@dtfprintingtechnology9457 If I use Acrorip 10 what driver it is?
@@malmo54 You don't need any special drivers for it.
can i convert a wf 7210 into a dtf printer
Where are you planning to put white ink? 7210 only has 4 colours. You need a 6 colour printer so that you can replace 2 with white ink.
@@dtfprintingtechnology9457 right ,didnt really think of that haha. I acutally got a couple of questions if you dont mind answering, I am actually planing to get a DTF printer from alibaba next week its called etamaster l1800 ,do you have any thoughts on those modified printers from china? do these printer last a long time? I want to do about 20-30 prints a day for my business. what is the maintenance like for these modified printers apart from shaking the ink and doing cleaning, are the printer heads long lasting or should I buy a couple extra in case something happens?
Does epson L850 work for dtf?
In theory yes since is a 6 Color Printer but just A4/letter size
You just have to use the Stylus L800, L805 Driver on Acro Rip cuz the printhead is the same
Mein Drucker druckt nicht ? Was kann der Grund sein ? Die Einstellung von der acrorip 9.03? Nur Papier kommt raus mehr nicht
Das Video sagt, dass Acrorip 9 dafür nicht funktioniert und Sie EKrip oder eine andere aktualisierte Rip-Software benötigen. th-cam.com/video/nhIw0MTNKKQ/w-d-xo.html Wir verkaufen EKrip für £ 350.
@@dtfprintingtechnology9457 danke mein Freund, was kostet die Software bei euch ?
Bitte nichts teureres :)
Danke 🙏
@@44kuzum Es ist sehr teuer. Ich weiß nicht warum. Aber Sie werden keine andere Rip-Software finden, die billiger ist. Einige kosten mehr als 5000 US-Dollar. Acrorip 9 ist billig, weil es sehr alt ist und keine neuen Drucker unterstützt. Wir machen diese Software nicht, also berechnen wir, was uns erlaubt ist. Recherchiere. Wenn Sie etwas billiges finden, das mit Epson 15000 funktioniert, würde ich es auch gerne wissen.
@@dtfprintingtechnology9457 das ist sehr teuer. Verstehe nicht wieso so viel Geld :) dann lohnt sich das doch alles nicht. Software teuer, Farbe teuer, Material was man braucht ist teuer. Was soll ich hier noch verdienen bitte ?
Danke :)
@@44kuzum Dies ist die billigste Methode für den Druck von Hemden aus 100% Baumwolle. Sie können ein Shirt für nur 2 Euro drucken. Wenn Sie einen günstigeren Weg finden, lassen Sie es mich wissen.
what about the waste ink pipe?
You can take the printer apart and run the waste pipe into a bottle.
@@dtfprintingtechnology9457 what happened if you don't?
@@rubenagurcia906 Eventually the waste ink tank (Maintenance box) will fill up. You will need to replace it. You will need to either empty it and reset the chip with a chip resetter, buy a cheap knockoff one or buy an expensive original.
@@dtfprintingtechnology9457 could you share a link where I can find a chip resetter please?
Couldn't you just keep topping off the cartridges and never let them run out to avoid having to replace them?
If you upgrade to chipless firmware you can. Otherwise printer will count how much ink it used and will ask you to replace the cartridges. Cartridges themselves don't measure ink levels. Printers calculates it based on how much you printed.
@@dtfprintingtechnology9457 gotcha! Makes sense. Thanks for the reply.
Hi ... If use acro 9 with xp-15000 and change the order of colors can work use other printer profile? In My country it's impossible to Buy some rip soft. Many thanks and great channel
One of our clients tried this and it did not really work.
Overall it sounds like the negatives of needing newer RIP software, CIS, customizing of the paper feed and ink waste tank might offset the savings of this printer vs a more expensive model. What's your opinion?
I only bought this printer for testing. Never really considered it for long term printing because of the reasons you mentioned. I know a few people who have been using it for a while and are still happy with performance but I'd personally stick to older models.
@@dtfprintingtechnology9457 yeah I watched another video of someone who has been using it as a daily driver for dtf and got all my answers. No one in their right mind should use this thing for any size production run in a serious business. It's way too finicky and prone to failure.
@@TheXboxSux I see you’ve commented on many videos regarding dtf printers. I’m new to the idea of them, what would you suggest for a business getting 25-50 custom short run orders per week?
@@Mansax2 any answers?
@@dtfprintingtechnology9457 what older model printers would you recommend?
Dumb question. How is it printing white if u don’t have white in the printer???
You sacrifice 2 out of 6 colours and print with just CMYK and 2 White channels using special DTF ink and softwware.