I've been watching your videos for the past week or so and love them! I like how informative you are and because of it I am now buying a grip of products to start taking care of my cars in this sort of fashion. You should do a video on hard water spots because I already know with the way my car looks at the moment and how long it has been since I have even done a basic wash I am going to have a problem with my hard water spots on both the paint and the glass.
Great stuff Jeremy. Yvan will be glad to see you using his products. He will also give you a hard time for using more than 1 spray of the Gold Standard Polish. I am guilty as well. 😋
I love the DIY product line as well. When I do a ceramic coating though I use two different towels for wiping off, different colors so I know which one is for the initial wipe and which one is to buff to that max shine.
When you open a ceramic bottle, can it be reused if you don’t coat the entire vehicle on the same day? I have a large SUV and would like to do a section at a time. Not a marathon. Thanks for the videos. Great work.
@@HawaiiDetailing my goal is( I live in so cal) but to split the vehicle in in four sections and have it done in month. I actually and going to use the cerkote , second version before it gets cold.
Thanks. Yes for sure but there were some trouble areas around the door handles and various spots on the paint. This car spends a lot of time in parking lots. The wool made it fast and easy. The red pad cleaned up behind it nicely.
@@picsnics No. It’s not hard. You do have to prep the paint before applying a super long term product on top of it. Otherwise you will see the swirls and paint defects forever. If your paint is new or in great shape the polishing is just a touch up to get it looking the best it can.
I got the problem please help. I spend money on Krenzler and foam canon. I test my house spigots and I got 4.2 gal per min (I don't know if that good or bad but pressure washer needs a lot less than that so I'm fine with that). I connected Krenzler to the dedicate outlet so plenty of juice. I was making sure there is no air bubbles in the lines. Long story short when I'm using 1.1 mm orifice my new pressure washer (same model like you have) is going up for approx. 2 seconds and loosing power for approx. 1 second and is going up again and down again. When I changed to 1.25mm everything is working fine but my foam is not thick and is heavy (2oz to 800 ml). Why my pressure washer have this oscillations when used with 1.1 mm? Why is unusable?
What model Kranzle do you have? What type of hose do you have? It is not recommended to use a 1.1 in a large volume GPM PW as it will force the pump to run really hard. Not sure what is going on here as it should not be surging either way.
Jeremy, is Koch Chemie active foam a solid alternative to green star with gsf?(basically the same thing?)Or would you lean to having the two to mix as needed…trying to be a minimalist
Yeah. I believe its similar. I am not shore the strength they have mixed? I am sure its more mellow than what I mixed but that is a good thing for routine washes. I was doing a heavy strip wash.
@@user-vf3rk8vp1z no swap it out with a new one after you have used it on a panel. You can clip and fold to get the most out of it but don’t use it a second time.
Good tip with the gloves! I see so many detailers use caustic chemicals or high PH soaps and end up getting a burn/rash.. SAFETY MATTERS people especially you younger folks..
Uh oh you used 2 or 3 sprays of gold standard polish! Supposed to be 1! Lol jk! Obviously you know what you're doing. Great work and video! ❤ Question, how do you like the DIY polish and pads?
Thanks. Yes. I know Yvan would be bummed. Hahaha. I was doing large sections of the paint at a time so I used more polish. If you are doing a 2X2 section only a half spray is needed. The pads work great.
Did you not watch the video? He addressed your concerns about decontamination. His vehicle is a “daily” driver but it’s also well maintained. Besides that, the polishing stage he performs is more than enough to decontaminate the paint … not possible to have a “half done job”. Like Jeremy says in the video, if you need further steps like claying or iron remover, do that. 😊😊😊
Hahaha. Yeah I got it when it came out but had to find time to do the full detail on my car. I did a massive wheels off detail. I only showed the coating so far but there is more.
Thanks. I know what they say but when you are doing a whole panel at one time you need more polish. That is personal preference IMO. If you are doing a 2x2 square 1 small shot is enough. Thanks for watching
As always, great job Jeremy! Thanks for choosing DIY Detail and C6 Ceramics
I have to say, this man's garage is STOOPID awesome.
Thanks
Nice to see you pumping out more content Jeremy, keep it up
Thanks. Will do. These recent videos were time consuming for sure.
I’m glad I found this channel 👍 I like the way you describe your steps as you do them! Very informative! Great job 👏
Thanks a lot. I appreciate it
I've been watching your videos for the past week or so and love them! I like how informative you are and because of it I am now buying a grip of products to start taking care of my cars in this sort of fashion. You should do a video on hard water spots because I already know with the way my car looks at the moment and how long it has been since I have even done a basic wash I am going to have a problem with my hard water spots on both the paint and the glass.
Great video. Im preparing to apply my first coating this fall to my new 4Runner - so great timing!
Thanks and its not hard. Take your time and it will come out nice.
Great stuff Jeremy. Yvan will be glad to see you using his products. He will also give you a hard time for using more than 1 spray of the Gold Standard Polish. I am guilty as well.
😋
Thanks I appreciate it. Yeah. I was doing entire panels in one crack so I went a little heavy. Sorry Yvan.
When you do your first wash in a few weeks, please make a video for us!
Dr Jones and I thank you!
You got it! Thanks
Keep the awesome content coming! 💯
Will do!
Excellent job man we need more video like yours . You are the best
Thanks I appreciate it!
Excellent content today! Thanks Jeremy! You are like Indiana Jones! Not finished watching yet, hoping Tiger makes another Cameo.
Haha yeah! This couldn't have come at a better time. Thank you good sir.
Glad you enjoyed it!
Great video Jeremy, always love the videos
Thanks. I appreciate it
yeahhhh looks great mate
Thanks Mate. You should have been here helping. hahaha
I love the DIY product line as well. When I do a ceramic coating though I use two different towels for wiping off, different colors so I know which one is for the initial wipe and which one is to buff to that max shine.
Thx for sharing. You are awesome
@@samchan9616 thanks.
Another great video Jeremy, great how to along with some tips.
Thanks. I appreciate it
Appreciated
Love it. This dudes garage is like a game room 😂.
Hahaha. Thanks.
Bammmmmmm , 😂😂😂😂😂 love your vids
@@LCculater thanks.
Thanks my man .
Your like the Gerry lopez of detailing.
Hahaha. Thanks
I'm happy that I found your channel. tks!!!!!!!
@@ClodoaldoMarques-v8n welcome. Thanks.
I’d love to learn how to ceramic coat PPF.
When you open a ceramic bottle, can it be reused if you don’t coat the entire vehicle on the same day? I have a large SUV and would like to do a section at a time. Not a marathon. Thanks for the videos. Great work.
Yes you can! Seal it tight and use it up in a reasonable time. Just keep in mind that the longer it sits after opening the less effective it may be??
@@HawaiiDetailing my goal is( I live in so cal) but to split the vehicle in in four sections and have it done in month. I actually and going to use the cerkote , second version before it gets cold.
Wouldn’t the yellow pad have been enough if the finish didn’t have much marring/scratching?
Regardless…. Nice job. A fine video. Be well.
Thanks. Yes for sure but there were some trouble areas around the door handles and various spots on the paint. This car spends a lot of time in parking lots. The wool made it fast and easy. The red pad cleaned up behind it nicely.
Thank you!
Great content!
Thanks.
“Beginner” part went out the window as soon as you introduced the buffer and polishing.
@@picsnics No. It’s not hard. You do have to prep the paint before applying a super long term product on top of it. Otherwise you will see the swirls and paint defects forever. If your paint is new or in great shape the polishing is just a touch up to get it looking the best it can.
👍
I got the problem please help. I spend money on Krenzler and foam canon. I test my house spigots and I got 4.2 gal per min (I don't know if that good or bad but pressure washer needs a lot less than that so I'm fine with that). I connected Krenzler to the dedicate outlet so plenty of juice. I was making sure there is no air bubbles in the lines. Long story short when I'm using 1.1 mm orifice my new pressure washer (same model like you have) is going up for approx. 2 seconds and loosing power for approx. 1 second and is going up again and down again. When I changed to 1.25mm everything is working fine but my foam is not thick and is heavy (2oz to 800 ml). Why my pressure washer have this oscillations when used with 1.1 mm? Why is unusable?
What model Kranzle do you have?
What type of hose do you have?
It is not recommended to use a 1.1 in a large volume GPM PW as it will force the pump to run really hard. Not sure what is going on here as it should not be surging either way.
Jeremy, is Koch Chemie active foam a solid alternative to green star with gsf?(basically the same thing?)Or would you lean to having the two to mix as needed…trying to be a minimalist
Yeah. I believe its similar. I am not shore the strength they have mixed? I am sure its more mellow than what I mixed but that is a good thing for routine washes. I was doing a heavy strip wash.
Should I use the same microfiber towel for the whole car to wipe after ceramic coating ?
@@user-vf3rk8vp1z no swap it out with a new one after you have used it on a panel. You can clip and fold to get the most out of it but don’t use it a second time.
Good tip with the gloves! I see so many detailers use caustic chemicals or high PH soaps and end up getting a burn/rash.. SAFETY MATTERS people especially you younger folks..
Yes. Its cheap insurance.
Question, why did you spray the pad with rinseless and then the polish?
To moisten it which makes the polish spread easier.
👍👍
What best psi for car wash? Thank you
1000 PSI is ideal.
@@HawaiiDetailing Do Kranzel have 1000 psi pressure washer or not? Thank you
Uh oh you used 2 or 3 sprays of gold standard polish! Supposed to be 1!
Lol jk! Obviously you know what you're doing. Great work and video! ❤
Question, how do you like the DIY polish and pads?
Thanks. Yes. I know Yvan would be bummed. Hahaha. I was doing large sections of the paint at a time so I used more polish. If you are doing a 2X2 section only a half spray is needed. The pads work great.
Hudson Heights
With that snow foaming/wash I do not think it is decontaminated at all. Also no iron or tar remover?
Agree, half done job IMO.
Did you not watch the video? He addressed your concerns about decontamination. His vehicle is a “daily” driver but it’s also well maintained.
Besides that, the polishing stage he performs is more than enough to decontaminate the paint … not possible to have a “half done job”.
Like Jeremy says in the video, if you need further steps like claying or iron remover, do that.
😊😊😊
How much for the gold card lol? This must be an old video because only the first batch of Hydro Lite came with it
Hahaha. Yeah I got it when it came out but had to find time to do the full detail on my car. I did a massive wheels off detail. I only showed the coating so far but there is more.
Another awesome video with the best vibes!!!!!! 😎
Thank you
Is that the Performance model?
No but his new Y is!
I hate coating white cars. So hard to see the rainbowing effect. ty
@@billnipp2309 yeah. Much easier on a dark car. Thanks
Nice work, however, maybe read on instuctions - one spray of gold standard, not two, not three 😉
Thanks. I know what they say but when you are doing a whole panel at one time you need more polish. That is personal preference IMO. If you are doing a 2x2 square 1 small shot is enough. Thanks for watching
Do you have a on the AR630 tss
No. i do not
@@HawaiiDetailing you don’t like it
I just have never used one so I am unable to give any feedback on it. I plan to bring one in at some point to check out.
The rear door looks a different colour
Same original paint. My detailing lights can change color to show scratches better. Probably what you are seeing is the tint from the lights
First
Thanks buddy. Yeah.
And.???😅