Getting the Cheap Pontiac GXP 5.3 ready for BOOST!!!
ฝัง
- เผยแพร่เมื่อ 7 พ.ย. 2024
- Well this project took a turn for the extreme after I found out the new tune with the cam would break the transmission. After some looking online I found a kit to install the 4t80e into the Grand Prix and while Im at it and the trans will be able to handle 600HP why not just turbo it.
Business inquires @ David.nenno@yahoo.com
Patreon - / junkyarddave
Instagram - / junkyard.dave
*Send Me Fan Mail*
David Nenno
PO BOX 9352
Pueblo, CO 81008
I wasn't very interested in this project... until it spiraled out-of- control. Now I'm on board completely!
Got hit with the "while I'm in there" downward money spiral. 💰 🤣
Swearrrrr that’s gm for you hahaha
But you gotta love it
thats part of owning a pontiac hahaha (i have an 07 gxp)
Ls4 king “Brandon furches” has everything you need for the 4t80e swap
Stoked to see the direction this goes! Appreciate your time today!
Man you are building stuff of dreams. Solid channel Dave. Thanks for the great content. Sincerely, Da Junkyard Dogs
You can bolt the 4t80 in with minor mods to the block, you have to grind off 2 spots on the block and one on the diff of the trans.
i’m so exited about this build. i can’t wait to see it done. ♥️
Bro... You crack me up. "Just put it back together...." Lol. Love to hear and see how this turns out when it's all done. Another fun project. Keep it up. 👍
it's nice to see something different good job bro
You are my favorite channel I’m pretty sure I’ve watched all of you videos, you about to be famous after sema! Best car build I’ve ever seen in my life!!! Bell has been hit👋
Check the block deck surfaces too. I suggest a minimum of a straight edge and feeler guage for flatness per specification.
Good morning Dave and thumbs UP to you.
I bought a wrecked one last summer... Nice to know you can get an oil pan to hold the starter! Field striped it for parts on my page..
LS4 king has huge success with the 4T80-E
Great video can't wait to see the oil pan with starter bolted on bottom
Good move on the trans Dave. It should have no problem doing what you want.
Are you going to do bearings or at least check them?
Just call Moroso directly, my buddies work there, they are good people. If you’re gonna turbo it are you going to gap the rings? Also I grabbed a new sharpening stone to clean the deck surface before putting the new head gaskets on
It's a custom pan sounds like they would get in trouble, I got the kit from the guy it wasn't bad
Did you change the rear main seal?
I'm excited to see this build too! 👌
Love to see a W body getting some love, ain’t no 3800 but still cool
Great video. I have a 2006 monte carlo. What is the trans you recommend to change to? Thanks!
4t80e
thanks for the info. Have you heard of a company called XP? I saw it online that sells OEM 4T80E. Thanks again!
Lol it's like a snowball down a hill, Dave. Has happened to me many a time
My customer has one of these, it's mad. He had a pair of the Corvette powered Cadillacs, as well.
great vid I want to turn my v6 lt monte into a ss clone and this is a great reference point for me!!!
I subscribed just because I'm building my GP GXP maybe one day we can race them
Remember : do not even look at the cam bearings 🤣🤣🤣
If there is no scoring on the old cam diameters, the cam bearings will be fine. I am sure dave would have noticed that.
Why not get the block surface cleaned up as well as the heads?
Dave, you seem to have the same problem as I do ... too many projects to work on and not enough time to work on them.
for a moment I thought that you were going to put the Tesla engine in the back but Idk
Tesla motor in the rear.....👍
Do it right the first time, and you won't have to do it over. Sounds like your doing it right.
just out of curiosity the T in 4t65e and 4t80e must stand for transverse while L in 4l65e and 4l80e must stand for longitudinal??? and if that is the case then internally there must be common components used.
Awesome love it.
You mentioned using a truck manifold, how much modification is it? Is it just cutting the collector off, and putting on a turbo collector? Is it a log manifold?
This thing would look great as a station wagon, just saying :)
Hell yea! Don't worry about going bald, bro. I did it very young.
“Hybrid” nice.
Definitely turbo it
Rock on Dave! 🤘 This build is 🔥
Are you going to put ceremic headers..looks nice..can't wait to hear it sound
Love this car
Did I miss the video of the magnum being finished and tested....?
I would go ahead and build the 4l60e because there's no custom fabrication involved
Just as well add ring gap now if you’re gonna turbo it.
Secret=AWD 😁
hybrid AWD hopenit works out!
That's what I was thinking, with that Tesla motor he bought awhile back. 👍
The transmission is really not weak it’s just the transmission fluid overheats and you will need to put a new transmission cooler on it
No, they're really weak. haha
Did you ever get more horsepower
Jesus why are people so vested in what they think you should do with your time and money.. trackhawk engine is expensive!!
I guess all you wanting to see the magnum completed drop off a trackhawk engine at Dave’s and I bet he will put it in..
Dave, love the channel!! Keep her lit!!!
Where is the trackhwak engine rebuild??
Hybrid AWD using the Tesla X rear.
Where do you get the oil pan
What is Dave’s actual job like wtf lol he always has time to do what he wants lol
4T80 will require some cutting
You should convert it to rear wheel drive
you are crazy dave. i would have just replaced the head gasket and sold it lol
Why would you ever sell it?
@@lclnbm put it towards something bigger and better
@@alleybuilds5370 fair enough I can respect that
That 4t65e will not live long with boost unless you convert rwd or build the hell out of that trans
What engine management and torque converter?
That front seal will leak 100% you did not use the centering tool before you torqued the front cover and now the oil seal is off set on the balancer surface.
👍👍👍👍👍👍
Do you think it’s possible to either 3800 supercharge swap to my 3.5 Chevy impala or should I do the 5.3 swap and is that even possible? Or should I just get a turbo?
The 3500 would be more reliable. Plus, turboing the 60 degree "V" make for lots more torque at the same psi as a factory supercharged 3800.
Thank you you said it adds a lot more torque what can I do about horsepower I’m trying to have a 3.5 sleeper I’ve never seen one and I wanna be a nice one I know about the overkill tune and a cold air intake I wanna try sometime with the radiator and my pulleys and trans to make it better
I hope the secret is awd...
Great video😀🇳🇴
*** Pull the rings and gap them a little more
Every time I see someone install a new cam on old bearings I cringe. Which is a lot because it seems like nobody takes the time to change them on LS engines.
I think the rule is you are not supposed to look at them 😂
And to think, you wouldn’t have pulled the heads if he didn’t supply the head gaskets.
Also you might as well make it AWD at this point
Find an ATI damper or pin that one before you get it back in
Those trannys can’t even touch 350 without a stage 3 rebuild from triple edge.
I have the 4t80 but it doesn’t shift
How could you not figure it out, you were eyeballing under the rear end like a high school kid at prom
AWD?!?!
😏😏😏😏
The secret is AWD.......
Hello
Bring me the 4T65e to Texas whenever you come
Poor thing needs all the help it can get!
Found one at the junkyard for $400.
The car I’m getting is a 3.8 supercharged very clean Texas car . Only thing is 1-2 no shift
I'll just pull the motor out from under the car so that when the car falls off the lift, it won't hit me in the head!!
9 thousand dollar car? Nobody is giving you 9k for that piece of shit lololol sorry bro it's like a 3,500 dollar car in mint condition
Yeah it’s one of Gm worst cars created lol
You look better bald
sp precision is the web page