Twin Turbine Rotary Grinder Tool Powered by Vacuum Cleaner
ฝัง
- เผยแพร่เมื่อ 24 ก.พ. 2019
- ►Subscribe! bit.ly/2m1d1y7
►T-shirts & Hoodies! bit.ly/2kABytm
This is actually a revision of this goo.gl/mHP2Ff but the major difference now is that it's precisely machined, It's more durable, reliable and more efficient. Nothing can beat hobbyist's rotary tools, but it's a prototype that I wanted to try out now that I own the PocketNC (5 axis desktop milling machine).
- PocketNC goo.gl/NdTxBS
- Harvey endmills www.harveytool.com/
Instagram: johnnyq_90
Support my videos!: / johnnyq90
Subscribe to my channel! / johnnyq90
Follow me on Google+ plus.google.com/u/0/b/1046338...
Follow me on Twitter! / johnnyq90 - วิทยาศาสตร์และเทคโนโลยี
that rotor balancing tecnique made my day !! thank you for sharing :)
Also find it very interesting..Craftsmanship level 99 :)
Honestly how ingenious is that? Using the magnets to create a frictionless rig for the shaft? Amazing to even think of it really!
same like Igor Negoda th-cam.com/video/fara1C8RJZM/w-d-xo.html )
I was like do I see what I am seeing
@@Kavster92 Man, I just realized now that those were magnets. I thought he had made some sorcery I could not see... But a magnet holder to balance is fantastic!
Sick. Much better than the dremel version.
I was thinking the exact same thing- I was expecting this one to be just as weak but then it completely blows away the Dremel version in the testing, so much more torque.
hope for the pocket NC lol
Pretty sure this IS the dremel. Did you see the hose while the tool was working? He made 2 one with air and the other attached to his dremel. I call shennanigins.
@@thegenerousdegenerate9395 Nah, you're just seeing things.
@@thegenerousdegenerate9395 I normally trust Johnny to make real things but I have to agree with this. It didn't sound or act like the vacuum powered one when he was actually using it, and it didn't bog down hardly at all when it was put to metal or wood. And it may just be my eyes, but the end shot, I feel like I can see it "cog" a little bit when he turns it off, like a rotor in a motor. I really want jq90 to clear this up, because I too call shenanigans.
JohnnyQ90’’s Wife:
Johnny Q has been vacuuming his workshop all day, it must be spotless by now?!
JohnnyQ90:
😂😎
Wife: "Johnny, the living room awaits!"
@@Simion_T you want me to make random holes in the living room honey ?
I'd love to see a disassembly and inspection of this after a month of use!
I particularly love how your videos successfully illustrate just how much work goes into a project like this. So many of these type of videos leave people with the impression that projects like this can be quick and simple if you just have the right tools, but your videos successfully communicate the necessary skill and significant amount of time required for such an intricate design, while still not becoming excessively long! Great work!!
I WANT THIS MACHINE !
Du auch hier ^^
@@NitroRC Klaro :-)
I am so jealous of your tools, ability to design and execute this. Wow
That's mental... You milled the guide vanes and *then* press-fitted that into another piece of metal, and then machined that down to a thin housing, all in situ. Crazy stuff!
Love the channel Johnny, I wish I could do half of what you can.
True that.
Dude! Those are some amazing looking parts!
Thanks man! I'm really glad you liked it 😁
It blows my mind the capacity and level of your thinking and knowledge!
Ahhh, Johnny, watching you work is like listening to fine classical music. So rewarding and pleasant. Your integrity and attention to detail puts a smile on my face. Thanks for taking the extra time to make a vid for all to share in your satisfaction. I hope you live a long and prosperous life and create many unique and perfect objects.
Please continue to post when you can. Such an inspiration to start my day. Thank You.....
Level 100 engineer. Respect.
9:13 I was like whaaat. I never knew something like that exist. I am latterly smiling.
Seeing the Pocket NC for the first time, blew me away!!
99% perfect. Who could ask for more? A pleasure watching your machining skills.
That's insane
Place the vacuum hose on the exhaust port. Flip the motor over so when you use it, the debris will be blown out of the way instead of sucked in!
Mad respect for your abilities, quality of work and awesome ideas!
Nothing better than watching a beautiful machine make a beautiful part.
Love the channel, keep up the amazing content.
Wow long time no see.
I love your making.
Please more upload the video!
Have a nice day. Good bye
Your inventions are awesome!!!!
What happened with the rotary engine with supercharger
Hi I am from Iran And I really enjoyed the design and the steps of making and assembling and the operation of the device, it works exactly like the dental device, well done to you craftsman.
You're a genius, congratulations my friend.
The power of succ
_Memes_
😂👌
vacuum cleaner normally runs 1.5kw to 2kw
that will put this tool amount the power tools.
@@lpjunction and air turbines are around 10% efficient so you can expect around 22w of mecanical power output, still not so bad
I am aware of thr efficiency
I meant the machine is taking 2kw level of power
that puts it amount power tools
That`s based on the power consummed
It's almost more useful that it vacuums the debris while working
yeah maybe a filter to stop the large debris and a funnel to get in close to the powder
Yeah but damages the propeler of the turbine
Battle Ground Survivor not if soft nonmetallic materials are used
Cobster Wilson yes I know, soft materials wont do damage
Chineses know what the next gadget they will sell
Outstanding demonstration of the capabilities of these small CNC machines... good job too.
Awesome content as always. Would love to see all your projects lined up on a shelf! Like a recount from all your previous endeavours! Keep at it man!
Next project... a filter cap so it won't damage the blades. Awesome job
Are you planning to attend Dental School as your new hobby?
image going to the dentist and he pulls out one of these
lol aaaahhhh that sound... of the dentist :-)
Interestingly, I've seen air powered drills such as this in the dentist office.
AVE gave up on it Not this guy!
Yes! the waiting was worth it. I really have been enjoying your videos for a long time now, and i need to say, that your a great thinker and maker, and you really should keep it up.
As usual another amazing video. It’s very soothing to watch the process. Thank you!
Alright alright, back to the turbocharged engine. Haha
I love watching this stuff. It's like meditation.
Amazing work! Thanks for sharing Johnny.
I want all your tools!!! I learned a lot of new techniques from your videos. Thanks for sharing
"I have a СТС and Lathe for more than 5k EUR. But I have no more money for a mini drill!" 40 eur, Carl!
I would not be mad at all if you pumped out more videos.
I wish I could upload videos at least once a week, but unfortunately many of my projects take too much time...
@@johnnyq90 I know the problem all too well.
This is an awesome video, but the moment I saw the tap holder I was pleasently surprised!! Nice work my friend!!!
Love the 90° thread tap guide. I need to make one of those for myself
what happened to the supercharged wankel engine?
CNC Igor Negoda
Да уж, коллаб с Негодой вышел бы знатный!
Игорь дремелем лопатки вытачивал вручную))) точно CNC
Без кофэ не то....
Призовите Игоря в тему ;)
I don't think this pocket cnc is sturdy enough for inconel
Oh man. That pocket NC is officially the coolest tool I've ever seen. The shit I'd make with that would be world altering
Magnifique réalisation ! Un très grand bravo !
Beautiful achievement ! A very big bravo !
Next step, a real combustion turbine like the ones used un aeromodelism.
and installed on his rc car... (for replace the original nitro motor)
@@MATEKYOO i like that idea, but for that it would be bettet to use it like in a helicopter, they use the turbine to make rotate the rotor instead of for thrust. If you use a turbine for propulsion on a RC car, even just having it started without accelerating, it would make it move forward and that is a problem.
@@AndoniOlea : hypothetically it should have a free power turbine geared to the transmission... (direct gearing the gas generator to a shaft converter is a bad idea, though it is a cheaper / lighter alternative)
Axial RC turbines, who wouldn't want them... ( though they do suck and blow thermodynamically at that size, allegedly)
@@kadmow You are correct in that, but if he uses a turbine in a conventional way, he should add brakes to the car (it doesn´t matter how they work) but it needs them.
@@kadmow This in size is not too big, but neither is it small. Generates 8.6Kg of thrust at full throttle. th-cam.com/video/KPtsLPMTVnY/w-d-xo.html
Привет,любители,турбо микро пылесосной тяги))
турбина долго не проживет, весь мусор через нее летит, за то чисто вокруг ))
А нкгода то рулит
😂
Very impressive. I think your videos get better every time!
That's such a great idea! Love your work, mate. 👍
Очень интересный инструмент получился ! Браво мастеру ! Есть одно но для практического применения не выгодно так как пылесос потребляет много эл.энергии проще пользоваться обычным дремелем а так посмотреть было очень интересно.
А то что инструмент совмещён с пылесосом имеет свои плюсы, вся (почти вся) образующаяся стружка улетает именно в пылесос...
Они богатые и они могут платить за электричество. Это в раше невыгодно
и вся образующаяся стружка влетая в лопасти рано или поздно(скорее рано) размолотит их или послужит образивом. при отломе лопасти возникнет дисбаланс и на таких скоростях ( судя по звуку 25-40 тысяч) будет жуткая трясучка . да и со шлангом от пылесоса в руке особо не поработаешь с мелочугой
Думаю если подключить компрессор эффект будет таким же. А где нибудь в поле, имея только баллон с сжатым воздухом инструмент незаменим
@@Zima71084 тут то смысл по большей части в идее и выполнении:)
Now mount that to the cnc, see how it preforms, it might be actually pretty good to mill :p
my first thought: could this work as a self cooling/ self cleaning spindle for diy cnc machines?
@@TheScarvig Ye it sure would work. Speed seems high enough. But the particles that get sucked in might damage / unbalance the turbines thus causing vibrations. But a blowing vacuum would solve this problem and actually would remove the need for a chip cleaning blower thingy... :p
Simply amazing. Great clean job. Awesome tools.
Nice build. Great equipment. I like the balancing technique.
High RPM but low torque right?
The project is really cool, but will the bearings survive the insane RPM's ?
Even ABEC1 bearings are rated to 30k+ rpms when the bearings are this small. I think the loads and temperature are a bigger concern if he's doing sustained work with the tool.
Temperature might be mitigated by airflow through the tool.
14:38 Thanks for demonstrating the vacuum
Felicidades!! Tienes un gran nivel de maestría. He disfrutado mucho viendo tú trabajo.
Saludos desde España.
What happened to the turbo rotory engine?
yeah im also waiting for the next video i want to see how much power that rc engine got
Игорю Негоде не показывайте, а то у него глаз задергается
А я ток хотел линк ему в камменты скинуть...
точно)
Love the fact that you put in stators.
damn... it was so hard to skip for once. the whole video was mesmerizing and cleanliness was up to the mark. well done.
Когда пересмотрел Игоря Негоду :)
Игорю бы такой ЧПУ, он бы уже наверное по луне ездил, огород городил. :))
у него же вроде есть чпу какой то, он просто не научился им пользоваться или просто по кайфу сделать это на токарном и фрезерном с ручной подгонкой.
@@neo_ex насколько я помню, это был 3д принтер, а это слегка разный функционал.
@@neo_ex У него плоский был, 2.5D, и здоровый, врядли там точность такая высокая.
Ну парень сделал,но мы то знаем
Aaah.... enginner porn. Absolutely stunning work!
Wow. That's really powerful. Great job and great idea.
Johnny Quality!!! You sir are a genius.. love your work
15:15 imagine a denist using that on your teeths xD
🦷🦷🦷🦷🦷🦷🦷
Его нужно срочно, вместе с оборудованием к Негоде отправить...тогда точно к марсу стартовать начнут
Лучше Игоря к нему, пожалейте иностранца 😂
Согласен он без стопка сдаётся
Негоде не показывает ато плохо ему будет
Игорю-то чего? Это ему плохо будет, когда увидит, как Игорь лопатки руками из инканеля точит! ))
Te lo voglio dire in Italiano volutamente: TU SEI UN GRANDE, UN TALENTO INCREDIBILE!!!! Una persona come te dovrebbe ricoprire cariche istituzionali pubbliche!!!!
Now that is precision engineering! Awesome video dude! 👐👐
You shouldn't use such long reach tooling for every operation. Your feeds and speed could be higher and your finish will be better if you stick with appropriately sized tooling. The machine will also be quieter, which is evidence of better tooling selection.
I need some thing made please let me know the if your willing to make and ship to me. Send your email if willing
It is a turbine shaft that had a shaft rotating over a shaft. In other words two shaft one main shaft and a second shaft over that main shaft
Just use two tubes
Look up AvE he’s doing just that making parts for people on his 5 axis Cnc townpump cnc
One of the best projects I've seen
That was a lot of work done.nice steady job
You made a fantastic job. Just perfect !! Congratulations !
You are so creative I was glad to see your work
WOW!
In 20 min's you made a micro turbine! Imagine what can you build in 200 min's!! :)
Ultra satisfying video!
Very fine and detail work. Excellent.
wow hobby machining just went up a level. nice cnc unit. incredible :)
Truly amazing to watch you work.
Wow you could make that into a product! I bet a lot of people would buy it! Really awesome build!
Now you can drill your own cavity. Awesome workmanship skills!!
Always quality stuff. Another good job.
the amount of effort put into this video is just INSANE! The people who dislike this video doesn't understand that! It makes me irritated :/
Impressive work as per normal always a pleasure to watch you work , love that pocket cnc
Hello, I express my point of view.
You have worked well and I liked it, The beauty is to plan and succeed in realizing and solving.
Nice to see you had a crack and balancing the rotor! Looks like it was close enough.
I remember Kirby vaccuum company making tons of attachments for their vaccuums, like even paint sprayers. But I don't remember them having a die grinder..😁 Very nice !
Really cool idea balancing between 2 magnets.
I love watching your videos. You don't have so say anything in them because your work speaks for you man. You really take time and effort into what you make. Keep it up
In regards to debris being sucked in, I know some shop vacuums have a side that lets them blow air instead of suck, have you given thought to that?
Wow its an amazing tecnique to rotate something and the rotor balancing was awesome i learned a lot with your video thanks for sharing
SUPERFINE QUALITY PIECE OF WORK. AMAZING!!! GREAT KNOWLEDGE OF ENGINEERING WITH GREAT IDEAS AS WELL. "HATS OFF".
Superb video, i always look forward to the next new one after watching.
Dude this is so badass!!! Wow I am amazed by your craftsmanship amazing idea so so cool how you came up with this concept
You really built from scrath, the idea from ur mind, with highly detail and precision. Wow,
Awesome idea you are very sharp between the ears
Great idea with the variable bypass to control vacuum pressure.
What an inspiration you are. So much attention to detail. I would pay a high premium for hand made tools by you. 👏🏽👏🏽👏🏽
The tool works perfectly!
Absolutely exceptional machining
wow that little cnc mill looks handy!
Perfecto ! Great work my bro