SNAP ON RATCHET FHLF80A|WILL IT BREAK🤔
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2022
- LIKE/SHARE/SUBSCRIBE😉
Enjoyed the video consider pitching in👍
cash.app/$Regal00
/ huntermapp
check out my car dyno🔥
• 00' Buick Regal GS dyn...
My tool box 🧰 tour
• Snap On 84" Epiq tool ...
Tool box 🧰 tour pt.2
• Snap On Epiq 84" ToolB...
#PHILLYDEE #SNAPON - ยานยนต์และพาหนะ
Right tool for the right job my man learn it
Yeah it proved that Snap On makes one pretty strong 3/8 ratchet. Loosened a few b4 it broke. Hopefully this helps someone in deciding to buy one👨🔧
Thanks for watching Subscribe & stay Tuned for more‼️🤝
When the right tool don't fit bro.
@@aplaceholderbplaceholder9524 had to get them off one way or another.
Thanks for watching Subscribe & stay Tuned for more‼️🤝
@@aplaceholderbplaceholder9524 just use an adapter 😭
@bryceridens8452 the adapter would have the same weak point at the 3/8 square drive
I knew that 3/8 ratchet was going to snap!!! Lol I’ve snapped like 3 already. Use a thin wall chrome socket.
It's pretty tough tho
Thanks for watching Subscribe & stay Tuned for more‼️🤝
c'mon, stop making us brothas look bad
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Always LIFT the bar instead of pushing down. Humans can lift more than push down... So here's my 2 cents.
Honestly I've never thought of that.....learn something new everyday🤙
Thanks for watching Subscribe & stay Tuned for more‼️🤝
I dont think this is accurated but even in it is if it breaks loose quick you risk hitting yourself in the face
Just use a half inch to 3/8 adapter on that socket
Love that you sacrificed a good ratchet for a video, goes to show anything can be broken. Just an idea, although thing might be this way already. I had a good excuse to buy a chrome half inch set specifically for lug nuts because my rims have the nuts recessed and sometimes the impact half inch won’t fit. Amazing how overtight people put these wheels on, if only everyone owned a torque wrench, your days would be a lot easier lol
I agree with you......and with or without the camera.....this ratchet and socket was the only set-up i had to use at the time
Thanks for watching Subscribe & stay Tuned for more‼️🤝
This is why you buy impact and chrome sockets
Facts....
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Chrome non impact sockets for an impact gun? Sounds like you love a buncha slop in the socket teeth after a few uses.
@@zerosano777 I comprehended that as him saying to buy impact sockets and chrome sockets.....bc the chrome sockets are usually thinner then the impact sockets and will fit where needed when needed in the case that impact socket won't fit.
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Yes that was exactly what i meant. Impact sockets dont always fit but chrome sockets usually do. My 3 foot long 1/2 inch drive ratchet makes that kind of stuff a breeze.
I love watching Snap-On break. Makes me smile, all while Snapper divas blame you on why it broke. Good thing it has a warranty. But will he be there this week to fix it, and then question you on what you did to break it? HF will replace their's same day, no questions. The difference, there is none, they both would've broke. 😂
Good point...
Sounds like your upset that you cant afford snap on tools
@vinichi3014 Your money, give to whoever you want. Even if it requires you bending over and taking it in the....wallet.
@@brianriggin4560 I'd you were good at your job you could afford it
@@brianriggin4560 lol I never heard that one before
Also you always want your breaker bar at as close to a perfect 90 degree angle as you can get it. When you apply force that’s where they’re the strongest at. Not trying to be mean like most folks on here gonna do, just want to help you be a better mechanic.
I appreciate the advice💯👨🔧
Thanks for watching Subscribe & stay Tuned for more‼️🤝
@@PhillyDee215 will do 💯
use chrome sockets on mag wheels
I didn't have one at the time....
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Those are usually torqued to 140, probably should not have broke. But not a wise move. Get the Koken lug nut sockets. 1/2” drive and they protect that wheel.
Right tool for the right job that ratchet not being meant for that
Gotta do what you gotta do to get the job done
F ratchet goes down the left facing right
"43"
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Try impact gun it's cheaper
Right😏
THANKS FOR WATCHING SUBSCRIBE AND STAY TUNED FOR MORE🤝‼️
Thin wall lug socket.
Yup.....4sure
Thanks for watching Subscribe & stay Tuned for more‼️🤝
And Snap On won't replace it!
Snap On replaced it....
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Breaker bar definition: a tool used for back scratching 🤓
Crazy bc I use my breaker bar all the time for that....naw I actually have a back scratcher in my tool box😉
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Use an impact and thin walled socket or at bare minimum a breaker bar or vehicle specific tire iron. This is the wrong tool for the job my man. Next thing you’ll do is try their 1/4 drive on a crank bolt
🤣..........
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Dude you need a breaker bar not a damn ratchet Sherlock
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Hey man did you try taking the hex screws off the center cap so you could fit a 1/2" in there? How's that oil change coming?
Thanks for watching Subscribe & stay Tuned for more‼️🤝
If you watch the video you commented under, you can actually see that the lug walls are small than the curve of the center cap, so taking it off would accomplish nothing at all! It’s okay tho, we make it passed only being allowed to check tire pressure, I’m sure you’ll start doing oil changes one day.
@@fancybiscuit4472 Crazy u mentioned oil changes.....I did a oil change on 6.7L Dodge Ram Diesel yesterday and the oil came out like Niagara Falls. It has like a 3/4" drain plug😳
Lol, Thanks for watching Subscribe & stay Tuned for more‼️🤝
@@fancybiscuit4472 No the center cap flares outward preventing a thicker socket from going in the lug walls without damage to the center cap itself. Removing the center cap will indeed give you the clearance to fit your 1/2 drive impact socket and a gun to remove the lug nut. You'd know this if you've ever had to find the 2 hex screws that are actually screws and not decoration to remove the center cap on those ultra wheels instead of eyeballing the lug walls through a cell phone video. One day you might actually get to check tire pressure if you ever decide to work on cars and not just watch videos of other guys doing it... poorly.
Quick tip for when you do- A 3/8s flex head with a cheater bar is not the tool to use when removing full size truck lugs. I'm glad it broke on camera for them. Up until then that moment the video was painful to watch.
@@fancybiscuit4472 I also LOVE. LOVE. That this guy boasts about owning every snap on tool imaginable but thought "Yeah let's use the thicker walled IMPACT socket instead of a chrome socket while we talk about socket fitment issues in my video"
A ratchet ain’t meant for lug nuts especially on Chevy trucks 😂🤦♂️snap on probably wouldn’t even wanna warranty this for this reason😂
Thanks for watching Subscribe & stay Tuned for more‼️🤝
My snap on man would warranty that even if a told him how a done it 😂😂😂 he doesn’t really care
Dudes using a flex head ratchet, pushing not pulling up for leverage, and a 3/8 drive to top it all off. You’d think someone with shiny chrome wheels & shiny brand new snap on tools would have enough money to just buy the correct tools. Coulda took a 20 dollar bill to harbor freight and that would’ve done the trick. Also ALWAYS pull upward and rather then try to push down on a ratchet to achieve the most leverage therefore applying the most amount of torque.
One the wheel is on the ground and two your using a ratchet and not a breaker bar
Hey😎the wheel was on the ground so it wouldn't spin so I could break it loose. The size that I needed....i only had it in 3/8 so I tested my Snap On 3/8 ratchet in a toughness test. Worked on a few and obviously failed on this one. Pretty tough ratchet tho
Thanks for watching Subscribe & stay Tune for more‼️🤝
That thing sounds like a hit and miss. You sure all 8 plugs are in their proper place? One didn't go all ford and leave the chat?
Ever heard of a 1/2 to 3/8 adapter 🤔
Yup I have a Snap On 84" Epiq tool box with every tool imaginable, check it out. I didn't have me adapters that day
th-cam.com/video/h5Zmx1iEHA0/w-d-xo.html
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Your problem is you went you mavis for tires they slap them mfs back on the truck with the impact no torque stick, lugs are prolly at a good 200ft lbs
Yeah exactly....
Thanks for watching Subscribe & stay Tuned for more‼️🤝
just use a chrome or thin wall half inch i just use chrome i've broke too many snap on thin walls only cracked one chrome
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Was the snapon truck out of breaker bars
That ratchet was pretty strong tho, broke three lug nuts loose prior to breaking
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Ughhh these suck…air is youre best friend to loosen…torque wrench and a dab of antiseize to put back..assuming you put new ones in and not use old
Agreed.......🤙
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Snap on ratchets but no impact, extensions, breakerbars? Come on na mayne
That was a bad day for me🤦♂️lol
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Wrong tool
Snap on left the chat
🤣......Who u think makes the best Air hammer?
Thanks for watching Subscribe & stay Tuned for more‼️🤝
@@PhillyDee215 damn I don’t even know lol. I don’t own one yet but it’s on the list. Im in aviation so I haven’t really needed one yet.
@@spawnandbatman6975 Airforce?.....I was in the US🇺🇸Navy
@@PhillyDee215 US Army Blackhawk repairer
@@spawnandbatman6975 ok......where were u stationed?
This is embarrassing, get a breaker bar. 😂
Strong ratchet tho....
Thanks for watching Subscribe & stay Tuned for more‼️🤝
My husky swivel is stranger than that 😮💨
U think so....I had broke three loose already b4 it finally gave up. Snap On ratchets are pretty strong and those lug nuts were over torqued at that
Thanks for watching Subscribe & stay Tuned for more‼️🤝
@@PhillyDee215 I gotcha bro but switch up. Snap on is good good but some stuff is just better in some spots lol. Keep posting vids. New subscriber here
@@PhillyDee215 I got matco and snapon. And use my husky swivels more than anything lmfao
@@priestoftheunderworld crazy part it wasn't my ratchet, co-worker said if it breaks he'll get it replaced. So I went HAM😳
Thin walled impact sockets. Snappy has them
At that time we had nothing else that would fit in there🤦♂️it worked for 3 lug nuts tho. Somebody over torqued them by a lot
Thanks for watching Subscribe & stay Tuned for more‼️🤝
You lied you weren’t laying on it you were standing up the whole time
Thanks for watching Subscribe & stay Tuned for more‼️🤝
That’s 1/2 inch brother
Thanks for watching🙏
Share & Subscribe 4 more🔥
🤣🤣🤣🤣🤣🤣
Didn't have my breaker bar or my half inch drive.....it was a perfect time to see how durable this 3/8 Snap On was. Took three lug nuts off tho and they were super tight😳
Thanks for watching Subscribe & stay Tuned for more‼️🤝
To bad your not getting a new one for free for using a cheater bar on a ratchet
Yeah we got it replaced, it was pretty tough tho
Thanks for watching Subscribe & stay Tuned for more‼️🤝
That's not a 3/8 wrench. Clearly a ratchet!
Its a Snap On 3/8 ratchet and 3/8 socket. Pretty strong, I got 3 lug nuts off with it
THANKS FOR WATCHING SUBSCRIBE AND STAY TUNED FOR MORE🤝‼️
Literally yesterday I didn’t have my impact on me and had to use a 3/8 and it literally gave up on the very last wheel after breaking loose 3 other wheels 😅
Soo I’d say that can take a good beating even if that’s not the right tool for the job
That's what I was saying🤣
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Know how to use tools
I've seen other TH-cam channels test tools.......I thought it was a good test
Thanks for watching Subscribe & stay Tuned for more‼️🤝
@Philly Dee you have the ratchet at an angle and no support on the head of the ratchet. You are putting alot of stress on that part that broke that doesn't need to be there. I've use way better breaker bars on Harbor freight and Walmart tools and still have them
@@jamesrains2068 i agree with u
Snap-on sucks any more and there over priced
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Your just broke
@@vinichi3014 I make more then you ever have
thats some clown $hit right there
Yeah Snap On told me the same thing
Thanks for watching Subscribe & stay Tuned for more‼️🤝