Silhouette Cameo 4 Sticker Tutorial and DIY Guide
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- Tata is in the house!
Jacek and I started playing around with custom stickers. A lot of people reached out to me about the process of creating stickers with the cameo. The video is on the longer side so I do appreciate everyone that watched all the way through and hope it helped. If you have any questions drop it in the comments below!
Glossy Vinyl paper:
www.amazon.com...
Matte Vinyl paper:
www.amazon.com...
Epson 2720 printer:
www.target.com...
Silhouette Cameo 4:
www.silhouette... - แนวปฏิบัติและการใช้ชีวิต
Great video, will help many people! When you offset, if you will release the compound path on that line, you can easily delete stray line segments by clicking..saves me some time sometimes😊
Thank you, that's an awesome tip!
Thanks for the video. Just a tip...when you import .png files they come with a cut line already. That feature came with a certain version of the Studio software. That should save you a step from having to trace each design. You go straight to offset. The cut line will remain around the sticker, so you just go to Send tab click your sticker, and select no cut. This will eliminate the inner cut line. Hope that made sense and helps.
Makes total sense. Much appreciated! I think I do it out of habit at this point so I dont get too comfortable😂
@@GamersQuests I can understand that. Think I commented before the end. I noticed you select "edge cut" , so create your offset, group it together and change to "edge cut" like normal. Just a thought to save you some steps.
@@RonWaller Any time saver tips are great tips!
This was the bestest tutorial for stickers I have seen yet!!!
Learned so much from this video - clear, to the point and targetting problems that may come up whilst printing and cutting. Obviously using experience to help us all, many many thanks. Great artwork, too! Cheers!
Wow!! I've been working this program for years and you just taught me so much I didn't know!! This is going to make my life so much easier!
Man...this is the video I was looking for! I was struggling so much on how to outline and cut the edges because I tried just the "Cut Edge" feature but it kept going on the inside too for some reason! But this was great! Thanks man!
Bravo brother, I purchased everything I need and I’m ready to make sticks. I would love to support you, it’s a shame these are not affiliated links.😊
Great video! Thank you!
This has been incredibly helpful, thanks a lot! Looked difficult at first, but with second sticker I got that feeling that I can definitely do it and it’s not gonna be too hard😁
Great tutorial! Thanks for doing this and making it look so easy!
This was amazing! Thank you.
Love you video,,Thank-you for Sharing
Can you make a entire video including you cutting vinyl step by step and how to print from a printer on a shirt not sure what software should I use etc.will be very helpful
YOU HAVE BEEN SO HELPFUL. I AM NEW TO YOUR CHANNEL AND SUBSCRIBER. ProTip: Try the net tool to automatic rotate the stickers but you have buy the silhouette business edition to access it.
So comprehensive. Thanks!
Thank you for watching! I hope it helped out.
I enjoyed watching the content and thank you very much I'm very new at this and need tons of help found your video very helpful
Thank you! You helped me out big time!
Awesome, glad the video helped!
Thank you for this demo.
No problem, I hoped it helped!
Thank you, thank you 😊
Awesome 👌
Thank you! 💪
I can cut more than one paper in the same mat 24x24 at the same time? and how thanks.
The cutting procees keeps smiling my blank ink all over my mat and takes ink away from my design. any tips? I guess I could heat press it a few seconds ?
Can you use an eco tank epson printer with this?
Thank you for this!! I am new to the Cameo! I have searched everywhere for the Oracal 215 where did you get it from?
Great video ty, where do you find those files
Not sure you'll see this but if you want to cut tight around an image, I'm trying to do potion bottle labels and I don't want the white around but I keep cutting and it ends up not cutting on the line right. Any suggestions on that?
Great video! I noticed that you have a different mat than the one that comes with the Cameo. Can you link it?
I purchased them off of Amazon a while ago. The brand on the ones I'm using is Funnybone but cant seem to find them anymore.
It was a combo pack like this one:
www.amazon.com/StandardGrip-LightGrip-StrongGrip-Multiple-Adhesive/dp/B087NJMHL2/ref=sr_1_8?dchild=1&keywords=cutting+mat+funny+game&qid=1632524288&sr=8-8
I'm 10 minutes in and you're teaching people how to do things in the most overly complicated ways. Hope you've updated your program knowledge since this video was published.
Work smarter not harder
What kind of cutting mat did you use?
I am using a light grip mat.
Similar to these:
www.amazon.com/StandardGrip-LightGrip-StrongGrip-Multiple-Adhesive/dp/B087NJMHL2/ref=sr_1_8?dchild=1&keywords=cutting+mat+funny+game&qid=1632524288&sr=8-8
Hi! Where do you buy the Oracal 215 film?
I love your stickers do you sell the files?
Where do you get your images for the stickers? They're AWESOME!
I was going to ask the same question
When you add your offset, say at 4inches, and then decide you want to size it down or up…does it mess with the offset distance originally put in place?
I try to get all offsets the way I want it and then cut. I have tried resizing up or down and ran into issues sometimes.
How did you make this video? With you in front and silhouette in the back?
I am using OBS Studio to record one of my screens and the camera.
Thank you for this!! I am new to the Cameo! I have searched everywhere for the Oracal 215 where did you get it from?