Oh, many thanks for this video! For me this is forgotten knowledge... In 2006 I was master in PBX systems based on Asterisk (including large conference contexts, speech recognition, complete corporate solutions and so on). I'm still intouch with telco industry, but due to my promotions I have forgotten ome things. Big thanks!
Hi, you made it seem very easy. Instead of sending just 1 SMS at a time, can I use that system as my SMS gateway to send multiple SMS at any given time?
I want to make gateway contains MINIdesktop with HUBs and Dongles , this gateway is connect to cloud PBX Issabel , this server contains a control panel to charge SIM and get USSD and SMS also to control calls
Hey! I'm new to FreePBX. I've set up Raspbx on a Raspberry Pi 4 and would like to make calls using a 4G SIM router (TP Link - TL-MR6500v/ VoLTE, VoIP, VoiceMail). The router works fine on the RJ11 port with a standard phone. I previously attempted to use the chan_dongle module, but it appears that the 4G SIM doesn't work with it. I don't believe the mobile carrier provides any SIP settings for 4G SIMs. Is it possible to connect the VoIP router with Raspbx over Ethernet?
this one really open mind, i will create for my school area based on this video. thank you for great video. i hope there is video how gsm call from outside forwarded to extension phone
Hi Tomasz, I downloaded raspberryPBX software from the source but it doesn't boot. What I get is info this board requires newer software. I have bought Pi 4 recently. Does that mean that this software cannot be used on this particular board?
2 years ago i've been tested this solution and i can confirm that works. But only can sens 160 caracters in one sms. I've asked you how can we change that to a large number of characters and you told me you have another projects that you are working on and when you will have time you will give me and answer. Now after 2 years i cannot find my initial post and neither and answer to my question.
does it support voice? I'm not sure it does out of the box. I remember modem needed some hacking action to be able to work for voice. now it is a sms gateway from the video.
Hello I assume you are from Poland - if I mistake english version below Chciałbym zbudować taką centralkę, żeby móc odbierać i wykonywać połączenia z karty SIM przez softphone ale mam pytanie, z komentarzy wynika, że korzystasz z modemu Huawei E169 lub Huawei E173, mam szukać wersji hi-link czy no hi-link? oraz który będzie lepszy do wykonywania i odbierania połączeń? I would like to make such phone exchange to be able to make and receive calls from through SIM card by using softphone, but I have questions. According to the comments you are using Huawei E169 or Huawei E173, but do I need to find hi--limk or no hi-link version and which can you recommend for make and receive phone calls?
after running command "asterisk -r", get an error chan_dongle.c:222 opentty: unable to open /dev/ttyUSB2: No such file or directory. I have been looking for a solution online. No luck. when i run command "ls -l /dev/tty*" no USB appears. even when i have connected the USB flash drive instead of just HuaweiE8377 modem. Just installed raspbx following what you did. I am running Pi 3 b+ 2017
That would require some testing. Here is the list of verified modems: asterisk-service.com/page/chan-dongle-modems My plan is to create a tutorial on how to use usb_modeswitch to use various dongles in plain Asterisk. That way I will be able to test more modems. Current list of vendor:product - hotkey404.com/wp-content/uploads/2021/06/usb-modeswitch-list-all-vendors.png Use lsusb -v to check if your device is on the list.
I personaly use ODBC to store sent & received messages in MySQL. Then a simple PHP website to view the history and to send more messages via Asterisk Manager.
Hej, na starym laptopie mam zainstalowane freepbx i działa, ale ten lapek nie ma sprawnych portów usb, a chciałbym aby 2 numery dzwoniły tylko przez taką bramkę rasberygsm :) jak połaczyć freepbx z bramką raspberry-gsm przez sieć aby numer 102 i 110 dzwoniły przez gsm ? z góry dzięki za pomoc.
Jeśli mówimy o chan_dongle to raczej tylko modemy z USB. Ale np chan_mobile pozwala na połączenie przez Bluetooth. Jeśli posiadasz Raspberry to tam możesz podłączyć modemy a na laptopie zestawić SIP Trunka miedzy PBXami
o coś takiego właśnie mi chodzi :) na malince mam raspbx i dwa dongle, skonfigurowane jak w Twoim poradniku, wszystko działa super, ale jak teraz mam zestawić sip trunka pomiędzy moim freepbx na laptopie, a malinką z donglami ? możesz zrobić tutka ? z góry dziękuje za pomoc.
@@HOTKEY404 Managed to overcome the issues.Take note that the newest Bluez is not working fine with raspi. After Bluez is upgraded,BT MAC address become AA:AAA:AAA:AAA:AAA:AAA. Has to downgrade the bluez to work again.
Since I dun have any old model phone around, I am testing with Xiaomi handset but on the calling side, the sound is static. Apparently, Chan_mobile uses default frame size 48 and the new BT is on 60. Would you mind doing a video of how to change this value and recompile the chan_mobile?
Trafiłem tutaj po fakcie, kiedy uruchomiłem swojego freepbx'a z dwoma modemami huawei ;) Szukam rozwiązania gubienia ramek przy transkodowaniu audio ;)
Hey. Pewnie w komentarzach będzie ciężko pomóc, bo może się to wiązać z dłuższą korespondencją 😜 Proszę pisać na info@hotkey404.com. Możemy pomyśleć jak pomóc
Man, built in sms to email forwarding!!! That's all what i need. International roaming is pretty expensive in my home country and I wanted to access OTP from that number, also keep it active by sending a few sms every now and then.
Oh, many thanks for this video! For me this is forgotten knowledge... In 2006 I was master in PBX systems based on Asterisk (including large conference contexts, speech recognition, complete corporate solutions and so on). I'm still intouch with telco industry, but due to my promotions I have forgotten ome things. Big thanks!
This looks great! But does it support more modern dongles that use 4G / LTE? They're shutting down the 3G network here any day now!
Can I use any dongle or is there any specific type?
is it dongle 4G LTE is stable for 24/7 ?
Hi, you made it seem very easy. Instead of sending just 1 SMS at a time, can I use that system as my SMS gateway to send multiple SMS at any given time?
I want to make gateway contains MINIdesktop with HUBs and Dongles , this gateway is connect to cloud PBX Issabel , this server contains a control panel to charge SIM and get USSD and SMS also to control calls
Hey! I'm new to FreePBX. I've set up Raspbx on a Raspberry Pi 4 and would like to make calls using a 4G SIM router (TP Link - TL-MR6500v/ VoLTE, VoIP, VoiceMail). The router works fine on the RJ11 port with a standard phone.
I previously attempted to use the chan_dongle module, but it appears that the 4G SIM doesn't work with it. I don't believe the mobile carrier provides any SIP settings for 4G SIMs. Is it possible to connect the VoIP router with Raspbx over Ethernet?
hi have you tried??
this one really open mind, i will create for my school area based on this video. thank you for great video. i hope there is video how gsm call from outside forwarded to extension phone
is there any way we can connect fxo fxs port similarly
Hi, have you tried it with Pi400? It seems like there are some network problems for the release 10-10-2020. Basically eth0 doesn't connect
Hi, from where can I buy Huawei E173 and Huawei E169 dongle?
I think currently it's best to search for used modems on local market. At least that's what I'm doing 😅
Hi Tomasz, I downloaded raspberryPBX software from the source but it doesn't boot. What I get is info this board requires newer software. I have bought Pi 4 recently. Does that mean that this software cannot be used on this particular board?
Nicely explained everything, one question can we generate voice call also?
2 years ago i've been tested this solution and i can confirm that works. But only can sens 160 caracters in one sms. I've asked you how can we change that to a large number of characters and you told me you have another projects that you are working on and when you will have time you will give me and answer. Now after 2 years i cannot find my initial post and neither and answer to my question.
Hi! Do you have a solution how to utilize the SMS?
Hello sir plz tell me can i connect two location raspbx way internet like voip call system same like raspbx to raspbx in two location way internet
How many simultaneous outbound calls and inbound calls can I expect?
1 concurrent call (in or out) per SIM card
does it support voice? I'm not sure it does out of the box. I remember modem needed some hacking action to be able to work for voice.
now it is a sms gateway from the video.
It depends on a device. Some have voice unlocked so you can just dial dongle/dongle0/${EXTEN}
@@HOTKEY404 yes, I found your other videos too. Thanks for them. I will try to setup something like that.
Hello
I assume you are from Poland - if I mistake english version below
Chciałbym zbudować taką centralkę, żeby móc odbierać i wykonywać połączenia z karty SIM przez softphone ale mam pytanie, z komentarzy wynika, że korzystasz z modemu Huawei E169 lub Huawei E173, mam szukać wersji hi-link czy no hi-link? oraz który będzie lepszy do wykonywania i odbierania połączeń?
I would like to make such phone exchange to be able to make and receive calls from through SIM card by using softphone, but I have questions. According to
the comments you are using Huawei E169 or Huawei E173, but do I need to find hi--limk or no hi-link version and which can you recommend for make and receive phone calls?
Hey. Może też być po polsku. Raczej korzystałem z wersji bez Hi-link, żeby były wykrywane jako modem, a nie karta sieciowa.
@@Marek.M podzielisz się linkiem?
Great video! Just what USB Modem are you using exactly?
Thanks. Huawei E173 and Huawei E169
How could u use this for GSM termination business
Depends on the scenario you want to accomplish
life savior!
can you help us how to do in bulk
Hi. Feel free to contact us on info@hotkey404.com
Do i need a sim card for this?
Yes. You need a SIM card to make calls via dongle.
after running command "asterisk -r", get an error chan_dongle.c:222 opentty: unable to open /dev/ttyUSB2: No such file or directory. I have been looking for a solution online. No luck. when i run command "ls -l /dev/tty*" no USB appears. even when i have connected the USB flash drive instead of just HuaweiE8377 modem. Just installed raspbx following what you did. I am running Pi 3 b+ 2017
Hi. Huawei E8377 is a 4G modem and it might not be compatible. In the comment section you will find the list of compatible modems.
I have same issue using Huawei E160 modem
Hi. Huawei E303 Same Problem . this modem is 3G and is compatible . please help how to solve problem. raspberrypi 4
Hello
Can install freePBX on ubntu?
I need to install pbx and nas and pi hole ?
How??
What is the right choice?
You can install FreePBX on Ubuntu. I guess you want all three on one machine? That shouldn't be a problem.
@@HOTKEY404
please make a video to show ho do this and install freePbx and pi-hole and NAS to gather in raspberry pi
@@HOTKEY404 PLEASE MAKE A VIDEO
Does It support 4G LTE USB dongles to make calls with mobile number?
That would require some testing. Here is the list of verified modems: asterisk-service.com/page/chan-dongle-modems My plan is to create a tutorial on how to use usb_modeswitch to use various dongles in plain Asterisk. That way I will be able to test more modems.
Current list of vendor:product - hotkey404.com/wp-content/uploads/2021/06/usb-modeswitch-list-all-vendors.png
Use lsusb -v to check if your device is on the list.
is possible to create API for get sms from IP ?
I personaly use ODBC to store sent & received messages in MySQL. Then a simple PHP website to view the history and to send more messages via Asterisk Manager.
@@HOTKEY404 can we get sms traffic from ip interconnection provider ?
Depends on the configuration. I suggest a meeting. Just write to us and we can schedule something: info@hotkey404.com
@@HOTKEY404 OK sure
Hej, na starym laptopie mam zainstalowane freepbx i działa, ale ten lapek nie ma sprawnych portów usb, a chciałbym aby 2 numery dzwoniły tylko przez taką bramkę rasberygsm :) jak połaczyć freepbx z bramką raspberry-gsm przez sieć aby numer 102 i 110 dzwoniły przez gsm ? z góry dzięki za pomoc.
Jeśli mówimy o chan_dongle to raczej tylko modemy z USB. Ale np chan_mobile pozwala na połączenie przez Bluetooth. Jeśli posiadasz Raspberry to tam możesz podłączyć modemy a na laptopie zestawić SIP Trunka miedzy PBXami
o coś takiego właśnie mi chodzi :) na malince mam raspbx i dwa dongle, skonfigurowane jak w Twoim poradniku, wszystko działa super, ale jak teraz mam zestawić sip trunka pomiędzy moim freepbx na laptopie, a malinką z donglami ? możesz zrobić tutka ? z góry dziękuje za pomoc.
Czyli ze co dzieki temu moge sobie wysylac smsy z lokanej strony www ?
Jeśli w trakcie instalacji zaznaczysz taką opcję to tak. A jeśli nie to bez problemu pisaliśmy aplikacje do dwustronnej komunikacji przez smsy.
Raspi-Upgrade throws errors and after overcoming those issues, the bluetooth is unworkable after the upgrade.
It’s really hard to help without some debug information.
@@HOTKEY404 Managed to overcome the issues.Take note that the newest Bluez is not working fine with raspi. After Bluez is upgraded,BT MAC address become AA:AAA:AAA:AAA:AAA:AAA. Has to downgrade the bluez to work again.
Since I dun have any old model phone around, I am testing with Xiaomi handset but on the calling side, the sound is static. Apparently, Chan_mobile uses default frame size 48 and the new BT is on 60. Would you mind doing a video of how to change this value and recompile the chan_mobile?
Dzięki za przekazaną wiedzę, ale... jest delikatny niedosyt :) szkoda, że nie pokazałeś konfiguracji trunka itp. Sub leci :)
Taki jest plan. Tylko musimy dokończyć pracę nad filmami (rejestracje TLS, instalacja NAS na RPI4, itp..). Ale w kwietniu możemy wrócić do RasPBX 😉
Trafiłem tutaj po fakcie, kiedy uruchomiłem swojego freepbx'a z dwoma modemami huawei ;) Szukam rozwiązania gubienia ramek przy transkodowaniu audio ;)
Hey. Pewnie w komentarzach będzie ciężko pomóc, bo może się to wiązać z dłuższą korespondencją 😜 Proszę pisać na info@hotkey404.com. Możemy pomyśleć jak pomóc
Thanks, great! Нравиться подход у тебя. Кстати, у меня на канале есть подобное видео, только на русском языке.
N1 👍
Man, built in sms to email forwarding!!! That's all what i need. International roaming is pretty expensive in my home country and I wanted to access OTP from that number, also keep it active by sending a few sms every now and then.
555th like and 68th comment on oct 3rd 2023 5:45PM