Excellent video. I bent a perfect (and very small 1 cm) offset first time following your directions, having never done it before, even using a borrowed Rothenberger bender which has only 45 and 90 degree marks on it, which meant eyeballing the angle. If I were to buy a pipe bender I would get one with proper angle markings.
Where you decide to pull the bend i.e inside outside edge centre of pipe you pull the bend to that mark. City and guilds teach to the centre of the pipe but as above you decide where you pull the bend too. 👍🏿👍🏿
![[[OFFICIAL MV]] เอิ้นขวัญให้อ้าย- อ๊ะอาย สกุณาพร | ค่ายเพลงเป็นหนึ่ง](http://i.ytimg.com/vi/83x6L3X3qh0/mqdefault.jpg)
he provided very good info on measurement to get accuracy bending. Thanks a lots.
Julian! You were my tutor at Reading college back in 2009! I somehow managed to make a career in plumbing after you taught me!
Excellent video. I bent a perfect (and very small 1 cm) offset first time following your directions, having never done it before, even using a borrowed Rothenberger bender which has only 45 and 90 degree marks on it, which meant eyeballing the angle. If I were to buy a pipe bender I would get one with proper angle markings.
Good informtion
Really helpful videos, thank you for sharing. Are you able to recommend a bender for 28mm pipe?
Anyone know where I can get the angle brackets with hole in from please???
선은 파이프 바깥 부분
How to calculate any degree bend of CLR
one question , the markers on the pipe bender do you bend so the marker is centre of the pipe
Hi yes that’s correct
Where you decide to pull the bend i.e inside outside edge centre of pipe you pull the bend to that mark. City and guilds teach to the centre of the pipe but as above you decide where you pull the bend too. 👍🏿👍🏿
Can your tool bend 7/8" copper pipe ?
Jason
15 mm 22 mm
👍🏽👍🏽
You’re really weird, but I understand you and appreciate your tutelage.
Paul
in what way is he weird?