Copper pipe bending - pulling semi pass over with 100 mm pipe centres

Useful technique - Demonstrating how to do a semi pass over. Where the pipes are 100mm apart and the gap not to exceed 20mm.
Once you understand it you can use this technique on any pipe diameter and pipe spacing.
This will help you to get a good score in any practical assessment you may have related to this
Normally and end of second year assessment.

[@jonboy1568]

Thankyou Julian the videos are great please don't stop them I'm learning so much

[@Londontradecollege]

Hi Jonboy thanks for positive feedback!

[@paul_my_plumbs_uk]

👍🏿👍🏿👍🏿 Julian🔥🔥🔥 what a long winded process 🤓🤓🤓

[@Londontradecollege]

Hi - Colleges have strict tolerances to work to.

[@paul_my_plumbs_uk]

@@Londontradecollege i know i as i went through the TOLERANCE TORTURE 😂😂👍🏿 testef the college tutors levels

[@garfield2279]

I teach more or less the same, I explain that by using the drawing as a guide, you can produce the same bend in a piece of pipe, over and over and they will all look the same, for a row of cubicles for example, rather than doing it by eye, where they will be different.

[@davidproctor6359]

can show how get kick on 15mm before 90 degree bend for rad valve

[@Londontradecollege]

ok

[@danieloneill3398]

Could you demonstrate that other bend that is going into the radiator valves. Thanks

[@Londontradecollege]

Hi, check out a video i made on it called "pulling a 90 degree bend with a kick in copper pipe"

[@selvaraj-mb6ky]

Hello Mr. Julian. How can i get the plumber job from india. Please reply me. Thanks.

[@alexriley6663]

Carry on dreaming!!!