How To Fix Air Compressor Not Building Pressure Easy Fix. Please subscribe to my channel. I have a lot of How to fix videos and funny videos. You will love them...
Great. I changed the gasket plate and it works. Didn't use the gasket putty but bought whole kit for $18.00 at dlr. Thanks . You saved me lot of labor charge.
Thank you so much for taking the time to make and post this video -- exactly what I needed. You saved me buying a whole new compressor. Great, job, thank you.
Here's another positive comment for you ❤️ Thank you for your video and I think that you should consider... DOING A" TED" TALK... Being an average Joe myself I understood exactly what you're saying and in most TED talks they talk too clearly and use big words. You're talking to the layman here and doing a wonderful job. 👍👍
I like your "tool" kit. :-) I know a way to get that head to drop on straight so you don't smear your gasket stuff. Get 2 long bolts with the same thread as the head bolts. Cut off the heads & cut a screwdriver slot (or just use some all thread). Screw them in loosely on diagonal corners, THEN put the head on. Put a head bolt en each of the other holes and run them in finger tight. Take out your guide bolts and put the rest of the head bolts in. No sliding around, finish as usual.
I am trying to build my Subscribers rate on my TH-cam channel. So if you Subscribe to my channel and I will Subscribe to yours. If we keep this going it will help both of us. If you already Subscribed? Let me know and I will Subscribe to yours. Thanks...
Informative video. I have the same one that the head gasket failed shortly after purchase. I made a gasket for it and that has failed 10 years later. Still has good compression so time for another homemade gasket.
It is the same problem as mine compressor...I think also the motor is the same (cylinder, valves etc.) I know why the air compressor doesn't have air filter element on it....the inlet air valve stays open and the compressed air escapes through the filter by blowing it up like mine compressor too. Great job thank you it will be really helpful for me
I have a little 4 gallon pancake compressor. It stopped producing air. I checked the drain plug, all threaded connections, oil level, and relief valve. Everything seemed to be working fine. I unscrewed the air filter and tried to blow through it. Couldn't. With the air filter removed, I turned the compressor back on and it aired up the tank and cut-off just like it should. Air filter was clogged. I unclogged it using the same air I had just put in the tank, using a blow gun. Everything is back to working fine again. $0.00 spent.
Ty for this video post I bought a Goodyear 3 gal. And I used Teflon tape on all the connections, brand new out of the box, and it will not build pressure. I thought Goodyear and new, so I had destroyed the box and tossed the receipt thinking 🤔🧐 no way would I need it....learned a valuable lesson to keep the boxes and paperwork and see how it does. Well I should say it worked fine for about an hr and then died. So, it's one of those, I'll get to it later projects. But thank you just to anyone who goes to Walmart and buys a Goodyear 3 gal compressor, keep everything for like a week before tossing the box. Brand new and broke after an hour of use...that's what this world is all about now. Probably built by someone who never finished highschool and thinks the super bowl is a rice dish and Panda Express😂...sigh. anyway thanks.
Great how to! Have the same compressor mounted upside down under a truck deck and it failed rather quickly.. guessing the reeds are full of dirt. Might have to pull it apart and rearrange how it is assembled because just flipping it up wouldnt really work.
No it's Strother Martin! " What we've got here is failure to communicate. Some men you just can't reach. So you get what we had here last week, which is the way he wants it. . . well, he gets it. I don't like it any more than you men."
As soon as I heard the voice I thought.... " What we've got here is failure to communicate. Some men you just can't reach. So you get what we had here last week, which is the way he wants it. . . well, he gets it. I don't like it any more than you men."
I don't understand, was the only problem a bad gasket? The reed valve was okay? It would have been helpful to know the brand and size of the compressor, in the description. It looks to have only one reed valve if that is correct.
mine is a Parkside PKO 270 A3 compressor sold by Lidl, and looked identical to this one. in my case the outlet reed valve fractured into 3 parts, and only pumped up to 60 psi as a result. ordered replacements available at eBay and Amazon, apparently standard sizing for the V shaped outlet valve. when it comes in, I'll see if that's the case. The outlet valve sees the most stress from the pressure and heat so I'll have a lot of spares if it happens again.
@@dubmob151 Since I last posted, I took the top off the cylinder and found two reed valves, one was broken into two pieces. I was getting only about 35psi max. They are just metal rectangles of thin tin. I cut an identical size out of a piece of metal banding strap. It was thicker than the original reed so I sanded the surface done a bunch to thin it. Then fine polished to remove any scratches. It was still thicker but I installed it and now the compressor works perfect and holds completely, no bleed back.
@@Accumulator1 I was thinking the v shaped valve on mine might have been able to work if I could secure it with something like Kapton tape to hold it in place, but since they were about $1.25 ea for the 5 pack, I figured I may as well try to get something made for it. Remains to be seen if it is actually the correct part though.. 😉
Could you give me a model # for this compressor? I have one like but can not find it on the internet by the name on the unit? I need to order new rings and sleeve, if they can be changed on this model?
Hello sir is there any automatically switch in that motor last time repair it's not working properly sometime it ll take a 1/2min so how can I repair sir can u give idea please.........
My craftsman 33 gallon oilless started acting up. When I start using my spray gun at will be at a good pressure but noticed while my hand is in the trigger the pressure goes down. I release the trigger and press it again and it does the same thing. So basically it builds pressure but it somehow doesn’t hold the pressure to the gun unless I release the trigger
Hey Sandy I have the one with the flat 2 rectangle reeds one of the reeds had a sizable piece of trash under it ? Could that be why air was coming out of the oil filler cap????? The rings look very good and the cylinder wall you could still see honing marks very well. The metal gasket was in good shape too? I was trying to see why was my air was just blowing full blast out of that hole in my oil filler cap????
My compressor starts working and builds pressure up to 150psi but sometimes during work it will not start and won't keep tank charged. Sometimes it turns on only for a few seconds then goes quiet. Sometimes I hears something that it wants to start like air going somewhere through the pipe for about 2 second and then quiets and stays like that. Fails to keep up pressure in tank when I use it. Pressure goes low as 50psi but compressor doesn't start. Then I had to open drain valve to release remaining air pressure in the tank. Disconnect it from AC power for few minutes and it starts working again build up to 150psi again. I don't hear any air leaks. What could be wrong?
Love it!!! Really really helpful. And I even went up shit creek without my fuckin paddle lmao And thanks to uncle Ted and this here video clip, it got me back down safely and compressor running right again :) thanks again buddy 👍
Surely is the whole point in not using a gasket is so that you are not butting up two metal surfaces and damaging the mating surfaces. Someone correct me becuase if liquid gasket is fine then perfect saves me a few bucks
great to see people fixing things rather than buying new - subbed :)
Great. I changed the gasket plate and it works. Didn't use the gasket putty but bought whole kit for $18.00 at dlr. Thanks . You saved me lot of labor charge.
Your a true American sir, thank you. Fixed my compressor from this video
American fixing chinese compressor
Im so much amazed how you improvised the filter ..salute you sir.more videos
Thanks, made the repair easy. Bought the compressor at a garage sale for $20, gasket sealer for $10. Not a bad investment.
Thank you so much for taking the time to make and post this video -- exactly what I needed. You saved me buying a whole new compressor. Great, job, thank you.
Heck yes. Did same exact thing works great. Thanks dude. Gave me the confidence to do the job.
Great video fixed mine the same way. Thanks for taking the time to go step by step.
Here's another positive comment for you ❤️
Thank you for your video and I think that you should consider... DOING A" TED" TALK...
Being an average Joe myself I understood exactly what you're saying and in most TED talks they talk too clearly and use big words. You're talking to the layman here and doing a wonderful job. 👍👍
Good suction not like a good woman.. knowledgeable and funny... Thanks for giving this woman the confidence to fix my air compressor!!!😊
Thanks for the video! I have exactly what I need to do my own, the confidence to give it a go!
I like your "tool" kit. :-) I know a way to get that head to drop on straight so you don't smear your gasket stuff. Get 2 long bolts with the same thread as the head bolts. Cut off the heads & cut a screwdriver slot (or just use some all thread). Screw them in loosely on diagonal corners, THEN put the head on. Put a head bolt en each of the other holes and run them in finger tight. Take out your guide bolts and put the rest of the head bolts in. No sliding around, finish as usual.
I am trying to build my Subscribers rate on my TH-cam channel. So if you Subscribe to my channel and I will Subscribe to yours. If we keep this going it will help both of us. If you already Subscribed? Let me know and I will Subscribe to yours. Thanks...
Informative video.
I have the same one that the head gasket failed shortly after purchase.
I made a gasket for it and that has failed 10 years later.
Still has good compression so time for another homemade gasket.
It is the same problem as mine compressor...I think also the motor is the same (cylinder, valves etc.) I know why the air compressor doesn't have air filter element on it....the inlet air valve stays open and the compressed air escapes through the filter by blowing it up like mine compressor too. Great job thank you it will be really helpful for me
I like this Guy.! Very good explanation.
I have a little 4 gallon pancake compressor. It stopped producing air. I checked the drain plug, all threaded connections, oil level, and relief valve. Everything seemed to be working fine. I unscrewed the air filter and tried to blow through it. Couldn't. With the air filter removed, I turned the compressor back on and it aired up the tank and cut-off just like it should. Air filter was clogged. I unclogged it using the same air I had just put in the tank, using a blow gun. Everything is back to working fine again. $0.00 spent.
Ty for this video post
I bought a Goodyear 3 gal. And I used Teflon tape on all the connections, brand new out of the box, and it will not build pressure.
I thought Goodyear and new, so I had destroyed the box and tossed the receipt thinking 🤔🧐 no way would I need it....learned a valuable lesson to keep the boxes and paperwork and see how it does.
Well I should say it worked fine for about an hr and then died. So, it's one of those, I'll get to it later projects. But thank you just to anyone who goes to Walmart and buys a Goodyear 3 gal compressor, keep everything for like a week before tossing the box. Brand new and broke after an hour of use...that's what this world is all about now. Probably built by someone who never finished highschool and thinks the super bowl is a rice dish and Panda Express😂...sigh. anyway thanks.
Brilliant video thank you Sandy.
I’m going to give this a try and see if it works. I’ll get back to ya in a minute.
It’s been a minute
@@andrewcontreras5528 been a year
The compressor exploded
Add a joint and a hotrod in the back ground ,, and you're me👍thanks good job
Good job buddy, let me get to it!!!
Hell yeah.! Right on sandy got my puma compressor working 💯 😎
Thank you sir.
I hope you're still making videos Sandy. This is really good.
Great detail, thanks for the video
thank you, i have the same one,, and i was wondering what was wrong,,, thanks again
You're a natural.
Great how to!
Have the same compressor mounted upside down under a truck deck and it failed rather quickly.. guessing the reeds are full of dirt.
Might have to pull it apart and rearrange how it is assembled because just flipping it up wouldnt really work.
Very nice video tutorial thanks!
What a top notch job! super superb......
Excellent video.
Good one 👍
Great job appreciate your video sir!
does that 3 way valve on the attached on the head ever go bad, what is it called, does it have a pressure relief on it? Thanks Nice video
I like that first tool you brought.
Great vid and a laugh for the day. Thanks for the post.
Sweet video! Thanks !
THAT IS ONE NICE TOOL!!!!
Minute 8:11 looks like you were making a cookie monster cake 🤪 all jokes a side very good video well informative step by step blessings to you
Thanks man
Nice Tips
Good stuff bud thanks
Great! Thanks for sharing 👍 so well explained
thanx.great explaination..maybe could angle the camera little better next time or invest in tripod.liked!
Good advice but why u gotta point out the single leaf in the yard after it's been raked?
Best tire pump ever
I love your voice. Thanks for the video.
Subbed and like thank you from Thailand
Is that you Jim Tom?
No it's Strother Martin!
" What we've got here is failure to communicate. Some men you just can't reach. So you get what we had here last week, which is the way he wants it. . . well, he gets it. I don't like it any more than you men."
Thanks!
Lol, love your tool😂😂😂
Sandy, I have a problem way air is venting from the switch area?
This guy sounds like the chicken farmer from Napoleon Dynamite
"Over in that pig pen I found a couple of Shoshone arrowheads"
As soon as I heard the voice I thought....
" What we've got here is failure to communicate. Some men you just can't reach. So you get what we had here last week, which is the way he wants it. . . well, he gets it. I don't like it any more than you men."
Excellent video , thanks . Sandys a cool guy knows his shit .
I don't understand, was the only problem a bad gasket? The reed valve was okay?
It would have been helpful to know the brand and size of the compressor, in the description.
It looks to have only one reed valve if that is correct.
mine is a Parkside PKO 270 A3 compressor sold by Lidl, and looked identical to this one.
in my case the outlet reed valve fractured into 3 parts, and only pumped up to 60 psi as a result.
ordered replacements available at eBay and Amazon, apparently standard sizing for the V shaped outlet valve. when it comes in, I'll see if that's the case.
The outlet valve sees the most stress from the pressure and heat so I'll have a lot of spares if it happens again.
@@dubmob151 Since I last posted, I took the top off the cylinder and found two reed valves, one was broken into two pieces. I was getting only about 35psi max. They are just metal rectangles of thin tin. I cut an identical size out of a piece of metal banding strap. It was thicker than the original reed so I sanded the surface done a bunch to thin it. Then fine polished to remove any scratches. It was still thicker but I installed it and now the compressor works perfect and holds completely, no bleed back.
@@Accumulator1 I was thinking the v shaped valve on mine might have been able to work if I could secure it with something like Kapton tape to hold it in place, but since they were about $1.25 ea for the 5 pack, I figured I may as well try to get something made for it. Remains to be seen if it is actually the correct part though.. 😉
The bottom reed broke on my unit. So where’d you get those and are they universal?
Mines a jobsmart model
thanks for info
Could you give me a model # for this compressor? I have one like but can not find it on the internet by the name on the unit? I need to order new rings and sleeve, if they can be changed on this model?
Couldn't find the part for this brand, i found it under "Campbell Husfeld Air Compressor Valve Plate kit HL4000"
Good watch! Voice sounds like popcorn Sutton lol
Popcorn said fuck you lol
Dig the airfilter...have same problem...no air filter
Hello sir is there any automatically switch in that motor last time repair it's not working properly sometime it ll take a 1/2min so how can I repair sir can u give idea please.........
My craftsman 33 gallon oilless started acting up. When I start using my spray gun at will be at a good pressure but noticed while my hand is in the trigger the pressure goes down. I release the trigger and press it again and it does the same thing. So basically it builds pressure but it somehow doesn’t hold the pressure to the gun unless I release the trigger
What is that valve on the line leaving top of the head?
What's the model # for that husky campbellhausfeld
Hey Sandy I have the one with the flat 2 rectangle reeds one of the reeds had a sizable piece of trash under it ? Could that be why air was coming out of the oil filler cap????? The rings look very good and the cylinder wall you could still see honing marks very well. The metal gasket was in good shape too? I was trying to see why was my air was just blowing full blast out of that hole in my oil filler cap????
Mine does the same. Far as I can tell, it's gotta be the rings if much air is getting into the oil sump. Mine also look fine
My compressor starts working and builds pressure up to 150psi but sometimes during work it will not start and won't keep tank charged. Sometimes it turns on only for a few seconds then goes quiet. Sometimes I hears something that it wants to start like air going somewhere through the pipe for about 2 second and then quiets and stays like that. Fails to keep up pressure in tank when I use it. Pressure goes low as 50psi but compressor doesn't start. Then I had to open drain valve to release remaining air pressure in the tank. Disconnect it from AC power for few minutes and it starts working again build up to 150psi again. I don't hear any air leaks. What could be wrong?
Maybe your pressure switch isn't working properly-
Try cleaning the switch contacts in case they're dirty or pitted
Secbolt Pressure Switch Manifold Regulator Gauges Air Compressor
Search for that to get a replacement if needed.
Check valve not keeping pressure off piston makes it hard or impossible to start back up from research I have done.
I wish you would say (what we got here is failure to Compressor-----rate ),,,,,cause you sound just like that dude from Cool hand Luke hahaha
Where I purchase this valve plate ? I want new one.....
Ebay...
www.ebay.com/sch/i.html?_from=R40&_nkw=valve+plate+assembly+air+compressor&_sacat=0&_sop=15
Sandy Williams this model valve plate is not available on ebay.
Try to google it...
Amazon is better than fleabay. Faster cheaper.
What type of air compressor is this the name of it i cant understand
Good video but sounds like a damn arcade game in the background
Love it!!! Really really helpful. And I even went up shit creek without my fuckin paddle lmao And thanks to uncle Ted and this here video clip, it got me back down safely and compressor running right again :) thanks again buddy 👍
Shoe box works fine
damnit old man you are going to get fired again lol
Cool channel! Stopping by to support, keep them coming! Sub 172
Surely is the whole point in not using a gasket is so that you are not butting up two metal surfaces and damaging the mating surfaces. Someone correct me becuase if liquid gasket is fine then perfect saves me a few bucks
Does anyone know where to find the output valve for this air compressor? Can't find one anywhere. New or used.
I think it is like mine, check for here www.einhelltools.co.uk/product-list.php?pg1-cid1992.html
probably not looking any more since it's 4 years since, but they're available from Amazon and eBay.
th-cam.com/video/FLxlEIgwhGs/w-d-xo.html
I like that tool and it folds
Hello
Easy fix you say lmao
My woman is having low suction problem also... she's dam lazy
I hope i dont go shit up creek without the fucking paddle
you wear your camera you walking around so you can't see daron thing
Unwatchable.
Must have been Michael J Fox doing the camera work