How to fit new EGR VW Transporter T5
ฝัง
- เผยแพร่เมื่อ 24 พ.ค. 2024
- How to fit new EGR VW Transporter T5
How to fit new EGR VW Transporter T5 T5.1 2.0L TDi
If the video helped and you feel like putting a little thank you smile on my face you can buy me a coffee below:
buymeacoffee.com/handymanhandy
PART
EGR for VW Transporter T5.1 2.0 Tdi : amzn.to/4aAt1tm
TOOLS
Carista OBD scanner: amzn.to/3UVVkwD
Socket set including the Torx sockets: amzn.to/3VgEGcz
Grips: amzn.to/4bVKLkb
Flat headed screw driver
10mm Spline bit : amzn.to/44XITVA
EMERGENCY ROUNDED NUT TOOL
Cheap version of the Dremel with the flexi shaft: amzn.to/3WV6dRS
(This will allow you to grind off any nut that is stuck as per mentioned in the first video, only if nut extraction drill bits fail as did mine)
Cheers for watching guys, take care and remember to just take your time. - แนวปฏิบัติและการใช้ชีวิต
Cheers for the vid man, definitely going to give this a go.
Just take your time, good luck man!
@@DossingAroundInBoatsall fitted, the van runs lovely now. Thanks again for the easy to follow guide. 👍
Great work. Just in time for some windows down, system up summer weather ! 😅
Hi mate, thanks for this video I did mine myself tonight. Very fiddly at times! My old EGR was blocked up very badly. I changed the rear pipe too for a new one. I did notice that the side pipe next to the coolant pipe was very blocked too. Not sure how hard that will be to replace.