sometimes when you pull the thread through it ends up on the wrong side of the hook, and it won't take up the thread, if it doesn't catch start the process again after rotating the hand wheel 90degrees, also pulling the top thread to the left towarsthe 8:00 position, also turning the crank to the right as you start to ease on the pedal, you are starting super fast too you need to learn to feather the pedal more so it goes slower
When threading this particular Axis 114w103 one has to align the looper hole with the outer hole. Turn the handle until you see that hole then pass the wire threader through to pick up the thread .
i think your tension is too tight. you should never have to loosen he thread up below as you are doing. it could also be your needle. the trouble shooting list could go on...
Рахмет!!!спасибо!!!👍❤❤❤
sometimes when you pull the thread through it ends up on the wrong side of the hook, and it won't take up the thread, if it doesn't catch start the process again after rotating the hand wheel 90degrees, also pulling the top thread to the left towarsthe 8:00 position, also turning the crank to the right as you start to ease on the pedal, you are starting super fast too you need to learn to feather the pedal more so it goes slower
شكراً جزيلاً
Hi nice nice
شكراً
It's so nice work.i am also doing this work 13 year.
Are you selling it??
Do you have to use madiera thread? My needle will not catch the embroidery thread i bought at hobby lobby. help!
Check if the needle is screwed in tight and make a turn or a few right with the handle before starting the machine, maybe it will help.
When threading this particular Axis 114w103 one has to align the looper hole with the outer hole. Turn the handle until you see that hole then pass the wire threader through to pick up the thread .
I'm trying to thread and I don't understand!
My thread is only half catching then breaking. What am I doing wrong?
bottom tension should be almost non existent
Thank you!
@@wenzelranch my bar that the aorm gea ris on spins and throws off the timing, any idea why that would happen?
Did you ever figure out the trouble?
My needle is not catching the thread
I m essemble the mashine meny years
У меня Cornely машинка работает но не шеть нитку в верх материала не шеть
i think your tension is too tight. you should never have to loosen he thread up below as you are doing. it could also be your needle. the trouble shooting list could go on...
Salami Jim site machine bouco