Use an inverted plastic beer crate in place of the bucket. It doesn't catch oil but it's sturdier & flat, the shafts fit through & can hold the engine at multiple angles & any dropped tools, bolts ect fall through into a relatively contained area. It's also fairly easy to cut away some sections to enable the clutch/flywheel to rotate with the engine sufficiently supported.
Great tips! I was having a little trouble getting my 1972 CT90 clutch back together. Your attention to detail is wonderful. Works great now!! Cheers - Kirb
Hi can you do some videos about bikes wiring? And some common troubleshooting issues. Such as head light and panel lights not working. How are they connected? Their wiring diagram etc.
I have been playing with 4 engines now. One CT70 and 3 ATC70. One bottom end I have rebuilt and vapor blasted. My question. Can you fit an XR70 crankshaft and cylinder into XR50 cases. I just rebuilt an XR70 head for it has a roller bearing cam and fitted it to an ATC70 for its head was spent bad.
The clutch's setting scew face on you in @17:30 is dead on my xr50 and the oil leak by this place thank you for tips from France 👍
Use an inverted plastic beer crate in place of the bucket. It doesn't catch oil but it's sturdier & flat, the shafts fit through & can hold the engine at multiple angles & any dropped tools, bolts ect fall through into a relatively contained area. It's also fairly easy to cut away some sections to enable the clutch/flywheel to rotate with the engine sufficiently supported.
Great tips! I was having a little trouble getting my 1972 CT90 clutch back together. Your attention to detail is wonderful. Works great now!! Cheers - Kirb
Thanks so much for the details! Very appreciative on your effort, much blessings to you, Sir!
I really appreciate your videos, they are very valuable to me as an amateur builder, thank you!
Excellent video.
11/10
What happens when I used a impact drill to take off the fly wheel
Hi can you do some videos about bikes wiring? And some common troubleshooting issues. Such as head light and panel lights not working. How are they connected? Their wiring diagram etc.
all your videos are very useful!!!
keep going ;)
I have been playing with 4 engines now. One CT70 and 3 ATC70. One bottom end I have rebuilt and vapor blasted.
My question. Can you fit an XR70 crankshaft and cylinder into XR50 cases.
I just rebuilt an XR70 head for it has a roller bearing cam and fitted it to an ATC70 for its head was spent bad.
Annoying distorted sound