92 Silverado with a Beltech 5/7 Drop Kit. In progress of swapping in a 327 this winter. Videos of the swap coming soon. Music is by Five Finger Death Punch. Song is 'Bad company".
Niiice I got a 98 with a 4/6 and 22" irocs. Just ordered 3 inch springs for the front and some shackles for the rear. Hopefully it'll look as nice as yours
@@DAGOLFER34 , Hello Travis im almost finish with my c1500 project , however I like the 2 square shaped muffler you have . Can you please tell me the name and brand of the muffler. You really be doing me a big favor .
I currently have a 1993 GMC Sierra two wheel drive. I would like to convert it over to 6 lug for a new updated wheel from GM. Which are 6 lug. My concern is the backspacing and if it will be right. I would like to put the snowflake wheel on the new Chevy trucks on my 93. Anyone have suggestions?? Would be greatly appreciated. Pretty sure the backspacing on the new wheel is 6. 22
Will a 1995 K 1500 Silverado tbi 5.7 exchange /fit in 1991 C 1500 Silverado tbi 5.7 What will i need to change if anything. Will i need the wiring harness from the 95 5.7 or can i use mine in the 1991? Any Information will help.
@@DAGOLFER34 Thanks for your reply Its not a vortec engine. Reg. 1995 K 1500 5.7 350 4 bolt main im putting in. Taking out 1991 c 1500 the same motor except its 2 bolt main. Both have the tbi set up. Im hoping everything will hook up...
Travis Campbell alot better than mine bro I'll tell you that. I got a 94 silverado v8 no engine mods just cosmetic stuff like a sand down n aftermarket rims, I'm currently looking for the stock originals for it but they're hard to find.
Now that's a good lookin truck!!! Clean and simple, like it's suppose to be..
Sure wish I could have heard that V6 with those headers
Bad ass truck Bruh!! I was going to click away till I heard the jam and the music of the engine!!! it goes along so Well!! 👍👍👍
That's a nice ass truck.. Like the stance and the wheel/rim combo
not bad for a v6 it sounds deep and mean nice truck!!
very tastefully done.
Niiice I got a 98 with a 4/6 and 22" irocs. Just ordered 3 inch springs for the front and some shackles for the rear. Hopefully it'll look as nice as yours
CLEAN ASS FUCK BRO!!
5/7? Damn those wheels must be 17s. Lots off gap for 5/7. I got 2/3 drop with 22s. Only 1.5 inch wheel fender gap
I was thinking the same thing looks more like a 4/6 drop or 5 7 drop with little wheels
Clean truck 🕎
Thanks!
@@DAGOLFER34 , Hello Travis im almost finish with my c1500 project , however I like the 2 square shaped muffler you have . Can you please tell me the name and brand of the muffler. You really be doing me a big favor .
Amazing truck 👍
nice truck bro! 1 question, what truck did you get that wing/ tailgaite spoiler off of and what did you have to do to make it fit?
I love the song.
Nice job.
What kind of exhaust is that ?
Quick question.. When you lower a truck, do you know why do the axles shift forwards or back? Like they're not centered
I currently have a 1993 GMC Sierra two wheel drive. I would like to convert it over to 6 lug for a new updated wheel from GM. Which are 6 lug. My concern is the backspacing and if it will be right. I would like to put the snowflake wheel on the new Chevy trucks on my 93. Anyone have suggestions?? Would be greatly appreciated. Pretty sure the backspacing on the new wheel is 6. 22
Sweet truck what rims are those they look super clean
Will a 1995 K 1500 Silverado tbi 5.7 exchange /fit in 1991 C 1500 Silverado tbi 5.7 What will i need to change if anything. Will i need the wiring harness from the 95 5.7 or can i use mine in the 1991? Any Information will help.
This will be a complete harness change if it’s a vortec engine.
@@DAGOLFER34 Thanks for your reply Its not a vortec engine. Reg. 1995 K 1500 5.7 350 4 bolt main im putting in. Taking out 1991 c 1500 the same motor except its 2 bolt main. Both have the tbi set up. Im hoping everything will hook up...
@TravisCampbell Do you have the part numbers for the Cam kit and Headers?
Nice truck man, diggin the square body. Check mine out and see what you think.
Sweet truck brother i have a 91 i like the wing u have were can i get one?
Where did you get the headlights if you don’t mind
nice truck! where did you get your radiator fan from?
Did you experience leaning more to one side when ever you did the drop?
TURN OFF THE MUSIC MAN. WANT TO HEAR THE TRUCK NOT THE SONG DUUUUDE!!!! Come on duuuuuuuuuude!!!!
once@time then go look at his other videos it's his video let him do what he wants
Lol it's just a 4.3 v6 who cares what it sounds like. The music is better than any sound a 4.3 makes.
Aye bro what was all change when you put the cam?
It’s a cam and lifter kit. Usually you’ll change the timing chain and gear while you’re there. Not too bad.
Sexy truck man, what exhaust are you running?
Where rear flush bumper? What drop " ?
Hey man where did you get your Floor mats with the red Chevy bowtie?
Adrean 350ss lmc truck has everything for your truck garuntee it go a bunch of hard to find parts from them
What's the wing from what year model truck and all so I can get on too
It’s from a 03 silverado I found it in a junkyard for 30 bucks
What size wheel and tire combination are you running?
Why dont you get the 95-99 front grille?...it looks alot better
Had one sold it... they fit horrible. 454SS was just my style for this one
What type of muffler is that bro.
Did you notch the rear?
How wide are the wheels
What size are you wheels and tires
What wheel size and tire size ???
What size tires
335xxx miles?
Yes actaully 355k now 😂 just on the body.
What steering wheel?
It’s a flaming river wheel.
🖒🖒🖒🖒🖒
was your 4.3 really slow I replace mine a year ago and it's still slow
Joe Martinez should have dropped a forged 11:1:1 383 in it with the tbi still. Would have ran like a bat outta hell.
What wheels
How long did this build take bro?
It’s still going man lol
Travis Campbell alot better than mine bro I'll tell you that. I got a 94 silverado v8 no engine mods just cosmetic stuff like a sand down n aftermarket rims, I'm currently looking for the stock originals for it but they're hard to find.
Thats a 4.3??
It was lol check out my latest videos with it. Now fuel injected with a 327
@@DAGOLFER34 yea I'm a subscriber. Awesome channel by the way. I currently have a 4.3 and I would like to make my 4.3 sound this mean!
Turbo it .
$,7.6
The song fucked up the video
Nice, where did you get tailgate protector ?
where did u get ur air intake?
what size wheels are those