I LOVE IT!!!!! I have been reading about the build in the magazine. The video really helps out as well. Thanks again for all your hard work. I really appreciate it!!!! YOU GUYS ROCK!!!!
15 yrs ago u could get a nice OBS for $1500 to $3000 now a rust bucket goes for that or more my 1st car was a "84" Cutlass with the good V8 power windows straight body nice all around $1200 from my dad's friend now I seen the same car color and all $6500 and was in need of TLC big time and it was a V6
Amazing make over guys , as well to the lovely lady who helped with the coil overs.....However i do have one question on the wheels, i didn't see it in your description , or in the video...But did you have to use wheel adapters or spacers for the nova alloy wheels?......Thanks for a great video and a bad ass truck.
I would really like to see this done on a 99-07 truck this is quite the upgrade compared to the other drop kits offered I have the djm control arm kit 4/6 and the djm upgraded swaybars with lift shackle in rear with caltracs very basic but still puts you into the 2 grand range if you replace the coils and upper and lower coil spring isolation rubbers also this c notch is what should have been developed years ago I made my own support that I welded to the seat bar and stitch welded to the top of the frame rail along with stitch welded in the notch so I could remove it later for upgrades when they became available!!!!!
It's not super difficult because all the holes are already there for the lights and grille the main issue I found in doing the conversion was the wiring but mine was previously messed with
Adrian , if you got a 10 or 20 grand ride , and another 6 to 8 grand to add to your truck , go ahead , it's your truck and do what you want , I got 3 of these trucks , I'm not going to spend 6 to 8 grand for a 2 to 4 inch drop , when I could do it for a few hundred dollars and get quality shocks and suspension system with the money I have saved , also new tires and rims , and a lot of other things including many tanks of fuel
Did we miss something? The truck at the beginning has the older grille and headlights and no tint at the end it's got the newer grille and headlights and dark tint.
How hard would it be to install this kit on an obs 2wd tahoe?? The front suspension looks identical.. the rear looks pretty close. The rear cross section that gets cut out is there and the frame looks similar..
Did you guys do a headlight swap to or is it a different truck cuz it’s two different headlights on the truck from the beginning and the truck at the end
You thought I wouldn't notice that you changed the front grille and headlights from Cheyenne to Silverado but....hell yeah I noticed
OBS Chevys are the best looking trucks they’ve made
Beautiful how it sits
That last line...... do not be afraid to jump on..... friends.... wrench 😊👌👌👍👍👍 awesome.
That’s so cool....
This video has inspired me to customize my 1991 gmc 1500! thnx guys for this video
Love redoing 90s trucks
What a gem for $2,000. I’ve picked up my 88 c/k with 80k miles for $3,000 but not nearly as clean 😍
Gentlemen very impressive good job...now I need 2 buy me a Chevy Truck..
That front set up is bad ass
Wow, what a makeover. Great job.
Truck looks 100% better great job.
You could show everyone how you changed the grill from single light to 94 style dual composite grill like you did for this truck.
I LOVE IT!!!!! I have been reading about the build in the magazine. The video really helps out as well. Thanks again for all your hard work. I really appreciate it!!!! YOU GUYS ROCK!!!!
Very nice ride. Very nice job.👌🏿
I had to keep replaying 4:50 for some reason on how to put the coil over together, I keep getting distracted.
Same.... I wish it was in slow-mo ;)
@@TopwaterTony Just set the video's playback speed to 0.25 like I did.
hehe
😂
They did it on purpose
Cool another 4.3 truck becomes a bad ass street truck 👀 I’m building a 1JZ drift truck outa mine
Recently got me a 92 4.3 for $1400 with 170,000 miles. Cool video, gives me an idea of what to do with it
Beautiful truck
That's a nice setup! Awesome to see it happening in my hometown too! Ocala,Fl. the good ole kmart plaza.
Yesir!
Wheres it at!?? I would like to make a trip to get some work done on my chevy
@@motortopiaondemand wheres the shop located? I would love to get some work done on my Chevy
4:55 nice tan
Loser
Men this truck is perfect
Very nice clean truck good job guys
Amazing job, made that shit look easy!
What a steal
OBS gang🤘🏽😎
Obs maffia!
Nice drop I wouldn’t mind my truck looking like that
Need this on my truck
Truck look 10 times better😎
Nice 👍 thanks for sharing
It would be nice if they did a kit for 2 door tahoes too
0BS LIFE 🏁
15 yrs ago u could get a nice OBS for $1500 to $3000 now a rust bucket goes for that or more my 1st car was a "84" Cutlass with the good V8 power windows straight body nice all around $1200 from my dad's friend now I seen the same car color and all $6500 and was in need of TLC big time and it was a V6
Nice video, I like that kit, looks complete and well put together.
Nice truck.
What a beauty
Cool video!!love the truck
Nice work
Amazing make over guys , as well to the lovely lady who helped with the coil overs.....However i do have one question on the wheels, i didn't see it in your description , or in the video...But did you have to use wheel adapters or spacers for the nova alloy wheels?......Thanks for a great video and a bad ass truck.
Taquachiando cuhhhh🇲🇽
No quema cuhh
John Crankshaft its a v6 so it definitely doesn’t quema 😂
He upgraded to a 383 no more base trim Cuhh
Bad ass truck bro 🔥
I got a 1993 gmt400 long bed rebuilt 350
The lowering kit from Ridetech is $6,000 Alone not including the wheels and tires
Thanks, now I don't have to spend time looking for it. 👍🏼
Might as well get bags
Plus big brake kit. On a $2k truck. Nope.
Fantastic! Show! São Paulo - Brazil
I would really like to see this done on a 99-07 truck this is quite the upgrade compared to the other drop kits offered I have the djm control arm kit 4/6 and the djm upgraded swaybars with lift shackle in rear with caltracs very basic but still puts you into the 2 grand range if you replace the coils and upper and lower coil spring isolation rubbers also this c notch is what should have been developed years ago I made my own support that I welded to the seat bar and stitch welded to the top of the frame rail along with stitch welded in the notch so I could remove it later for upgrades when they became available!!!!!
Finally people are making aftermarket parts for these trucks
What do you mean finally? They have been for years
you forgot to show about changing out the headlights and grill
It's not super difficult because all the holes are already there for the lights and grille the main issue I found in doing the conversion was the wiring but mine was previously messed with
@@matthewconstance445 even harder is finding the grill and headlights not banged and cracked all to hell
This is what diego needs
I just don’t want to cut my frame but this is a good look ima have to try it
Very nice!
Though it's anathema to OBSers, the orig. front clip should stay on the truck. Go for the (slightly) different look.
Loved the video !! Nice kit ! Wish the audio was a bit louder though .
Thanks! We will keep that in mind for the next one.
That's a clean set-up, but the price tag on just the suspension is gonna dissuade most people I think. That doesn't change the cool factor though. 👍
You can do the qa1 suspension it's actually less money and way better system and a lot more adjustability
The grill morphed magically?
Excelente......de Luxe 👍👍👍👍👍👍👍👍👍
Beautiful
Need this for my truck Live in México.
You will hit the walls/ I mean speed bumps
0:27 my heart jumps. 😍😂
Perfect wheel size,no 28-30"wheels.
They donk fit on this truck.
That’s cool but quite a bit of modifying. It would be nice to have a 1-2 inch lift kit with the same quality
Do you guys sell these trucks? Or are they customers trucks that they are bringing to you all and you’re filming the work? I love all of them.
Wow!! Love it!! Do they make a little like that for a 2004 Dodge Ram 1500 single cab 4×2?
I'm surprised to not see a rear swaybar as part of the set up, if handling is part of the goal.
Muchas Felicidades Joven Por Su Canal
Awesome video, I've been looking at this kit. Wish the music was a little quieter. Keep these coming
Adrian , ride tech version-$6000 dollars ,
China version - few hundred
@@jimthomas777 yeah this is also a quality kit where one from China is a cheap copy. I'd have no problem paying more for something good
Adrian , if you got a 10 or 20 grand ride , and another 6 to 8 grand to add to your truck , go ahead , it's your truck and do what you want , I got 3 of these trucks , I'm not going to spend 6 to 8 grand for a 2 to 4 inch drop , when I could do it for a few hundred dollars and get quality shocks and suspension system with the money I have saved , also new tires and rims , and a lot of other things including many tanks of fuel
I wonder which one is better the Q1A or this wishbone system,, idk but I will be making that decision soon
What did you decide qa1 or this one
How much it costs for all the new parts? How much it cost for the hand job?
That truck looks awesome amazing what wheels and lowering ba truck can do for looks and performance
Great starting point, should've turned it into a fake '93 454SS.
Do you need to modify the drive line.
Did we miss something? The truck at the beginning has the older grille and headlights and no tint at the end it's got the newer grille and headlights and dark tint.
lol nice eye. Yes we swapped the front end as well. Here is that video. th-cam.com/video/K4ENARK2twk/w-d-xo.html
@@motortopiaondemand @ tire size???
@@gerardolopez5875 285-35-22 and 245-35-22
How come y’all didn’t get a vid of y’all sanding down the frame?? Or did y’all pay some one to do it for ya?
all she needs now is a step side 😎
I never would of thought saying $2k for one of those truck is cheap
Very nice wt will a job like these cost
Ready for a ls3 crate motor
I want one
Nice
Did you do a back drum brake to disc conversion on this truck and if so is there anyway you could go more in depth
total cost in suspension, brakes, wheels and tires?
Expensive
No quema cuh
What did you have to do to switch from single headlights to the composit head lights
what the size (fronts 22x9 rears, 22x??) and offsets on the wheels?
Hola quedó de maravilla
Thats nice but y does everybody lower trucks ?? i dont get it
is the c-notch mandatory for the wishbone? can i skip the cutting but install the bracket?
What do yall put on the frame to restore it
How hard would it be to install this kit on an obs 2wd tahoe?? The front suspension looks identical.. the rear looks pretty close. The rear cross section that gets cut out is there and the frame looks similar..
What's the price on this complete kit for this truck please
$5,000 for that coil over suspension?????
Uh yeah way out of my budget lmao 😂
Same. Lol. There stuff is super pricey, but heard nothing but good things about their products.
Out of my budget to. I love the set up but kit worth more than my truck.
Try 7k
Did you guys do a headlight swap to or is it a different truck cuz it’s two different headlights on the truck from the beginning and the truck at the end
mark lightner right!
Do they work for a 2500 Chevy 1990
wait? so you don't have to weld anything after you cut the frame. that kit just slips right over and fills the gap of the cuts?
Nice truck after the work got done to it. Wat size wheels
What is the total cost of parts including labor??
Rim adapters?
hello this kit is compatible with the Tahoe sport 3 doors 1996
Nice 👍
Probably long gone but do you still have stock rims and centercaps?
C notch plus grinding spindles “simple” -.-