Nice. I’ve seen guys pinch a bar and then reef on the saw to try to pull it out, that’s a great way to rip an impulse hose, or pull it off the nipple, if it doesn’t rip the hose…take care.
I got a 460 on ebay that was supposed to "run good".......arrived to my door and fuel line was cracked in half, so couldn't get it to start....while ripping the saw apart to do the Line, noticed the piston was Shot!! Lol.......My guess, is some clown ran piss gas threw the saw for 20 seconds, shut it off, and said "yep, it runs, throw it on ebay!".....NOT realizing they basically cooked the saw........luckily I was able to save the cylinder, it had extremely light transfer.... the piston/ring had to be replaced....but I got a Really good deal on that saw, so I didn't wanna ship it back to the guy, so I asked him to give me a partial refund to cover the cost of a new Quality aftermarket piston.
My 026 just blew up last week. I thought it was the piston when it happened but it was actually the cylinder, the transfer bridge blew apart. :( and yes it was a stock cylinder..
@@Old_Indian_Trick I'd hate to speculate. Like I said in the beginning of the video, I like to look for the clues to the failure. I'd only be guessing if said something without seeing it in person.
Yikes. Wouldn't it have stopped running with the impulse line completely detached? I'm definitely still learning but I thought that was pretty necessary 😅
Here's my best guess as to how a carb can still deliver a little fuel without the pulse line hooked up. I believe the venturi (throat of the carb) can still pull fuel with a modest vacuum created by the crankcase. Someone smarter than me may chime in to give more than a "seat of the pants" explaination.
@@richardflagg3084not that I’m any smarter but I imagine that the pressure in the warm fuel tank in combination with the vacuum created by the venturi in the carb can be enough to move a little fuel through the carb
@@richardflagg3084 That makes sense, thanks for the reply Richard 👍 Some guys just insist on running equipment until it completely dies I guess 😅 That thing had to be giving some serious signs of issues with the impulse line detached and that crank seal leak...
I just dont understand people that continue to beat on equipment thats not running like it was yesterday. Let alone after it starts screaming for mercy!😳
Looks like he was running that RED oil!😂😂😂. Ultra wouldn't look like that. Anyways, it's in great hands. 🍻
😂😂😂😂
This old air leak😂
If the impulse line was off though how was it running at all to be able to score the piston and cylinder?
That's an Ebay cylinder for sure!!
That MS460 looks like a heavy duty engine....
That piston is a paperweight.
Nice. I’ve seen guys pinch a bar and then reef on the saw to try to pull it out, that’s a great way to rip an impulse hose, or pull it off the nipple, if it doesn’t rip the hose…take care.
Very easy to do on a 440/460/461 especially when the impulse line has some age on it. The rubber gets a little firm and less "stretchy".
Where can I get a saw vice that
That one looks like an employee not an owner used ...... abused it
Spot on sir.
It looks "rode hard and put up wet".
Rich, nice TreeMonkey stand and nice informative video. 🪓🪓💪💪🙃🤗🌞🙃🌝🌝
She got several issues but they’re usually full of issues when they’re used like that
Chainsaw ..help ,,,me ..looking for new owner
I got a 460 on ebay that was supposed to "run good".......arrived to my door and fuel line was cracked in half, so couldn't get it to start....while ripping the saw apart to do the Line, noticed the piston was Shot!! Lol.......My guess, is some clown ran piss gas threw the saw for 20 seconds, shut it off, and said "yep, it runs, throw it on ebay!".....NOT realizing they basically cooked the saw........luckily I was able to save the cylinder, it had extremely light transfer.... the piston/ring had to be replaced....but I got a Really good deal on that saw, so I didn't wanna ship it back to the guy, so I asked him to give me a partial refund to cover the cost of a new Quality aftermarket piston.
Regarding the muffler, wont they all end up looking like that with lots of work over the years? Is it possible it was ran without 2 stroke oil?
There would have been some scoring on the intake side if it was straight gassed.
Wow banyak sekali mesin nya bos
My 026 just blew up last week. I thought it was the piston when it happened but it was actually the cylinder, the transfer bridge blew apart. :( and yes it was a stock cylinder..
Haven't seen that before. That sucks.
@@richardflagg3084 ya I thought it was very strange. You think it coulda been a harmonic issue?
@@Old_Indian_Trick I'd hate to speculate. Like I said in the beginning of the video, I like to look for the clues to the failure. I'd only be guessing if said something without seeing it in person.
O matko jedyna😯
Yikes. Wouldn't it have stopped running with the impulse line completely detached? I'm definitely still learning but I thought that was pretty necessary 😅
Here's my best guess as to how a carb can still deliver a little fuel without the pulse line hooked up. I believe the venturi (throat of the carb) can still pull fuel with a modest vacuum created by the crankcase. Someone smarter than me may chime in to give more than a "seat of the pants" explaination.
@@richardflagg3084not that I’m any smarter but I imagine that the pressure in the warm fuel tank in combination with the vacuum created by the venturi in the carb can be enough to move a little fuel through the carb
@@Oli4vn that's how my mind sees it aswell.
@@richardflagg3084 That makes sense, thanks for the reply Richard 👍 Some guys just insist on running equipment until it completely dies I guess 😅 That thing had to be giving some serious signs of issues with the impulse line detached and that crank seal leak...
Wow just wow
There's some special people out there 😂
Special people that didn't pay for the saw with their own hard earned money............
@@richardflagg3084 true that true
I just dont understand people that continue to beat on equipment thats not running like it was yesterday. Let alone after it starts screaming for mercy!😳
Some people could break an anvil with a feather.
People are nuts!