Hey Donny, is there a colder Plug for my 372 Husky than ngk 7? An eight or nine to use on my 210 psi compression Racer thats fitting under the Cover? Great Video , i had to learn that a sparking Plug dont have to fire when threaded in , when i was 17 and trying to fix my Lawnmover. So Plugs can be Assh…. Once learned, never forgotton.
@@ronalddietz1628 i know that eight is cooler than 7 . The Problem is, to find a small Plug that fits. I ordered a bpmr8y Plug. Thats better than nothing. I think there is no 9er Plug to find in that Dimension.
Why is a max flow not as good on a 661? Thanks for the tips. I've got 2 461s I love them so much. Damn near as heavy as my 066 but something about them is just so appealing.
Yeah he was saying the max flows are really the only ones you should use on the 661 & 500i as the oem filters are just not made air tight & the uni kits are too tight inside the stock cover that you have to clean it way too soon
Donny i realy could use help?? Have a almost new 661cm..has less than 10 or 12 tanks .it ran great ..still has factory groves in piston cylinder looks like new still.i cleaned it and put itcaway for about nine months or so in a box at home..it is so hard to pull even with decomp pressed..i checked fuel filter and put new plug .clean gas checked the intake boot ?? As i said it ran great its like new ..but it will not start almost broke my arm trying.and did several times 3 days in a row ..to make sure it wasn't flooded i checked the gap on the coil .i cannot find anything ..i do hear a swooshing sound when i pull the cord but assume thats just piston going up 👆. It has serious compession but i didnt remove t h e carburetor...yet..its like its not gett8ng fuel or spark..kinda like this video ..i also tryed 2 plugs
HI DONNY IVE seen that be 4 when the chainsaw won't start most the time it is the sparkplug even though it shows good the gas 2 day is no good no more either IVE took a sparkplug and cleaned it W small file and W a wire brush and after U have cleaned it it won't still start take old sparkplug out and throw it in the trash can 🥫😊😊 put a new sparkplug 😊😊 and it will start right 👉 😊 up the gas 2 day ruins the sparkplugs it shorts them out 😮😮OMG 9 14 2O23
Brilliant video donny! Basics really but super important. The number of times I've been caught out by a plug!!
Great video, thanks Donny! I'm more a Husky guy but I would think that the troubleshooting method is very similar! Cheers!
Hey there Mr Donny Walker
GREAT VID, DONNY. YOU RUN RIGHT THROUGH IT LICKETY-SPLIT, I STILL ANALYZE TOO MUCH.
well had 3 plugs in 40 years and they got me good
Superb instructional video, as always, Donny!👍👍👍
Great info Donny I need to change my fuel filters always forget!
Howdy mr.donny I don't know the difference between them pipe,never had one,running all stock I guess!!! Pleasure!!Sierra.John
I love it, Danny you need to come to Sawfest in Ohio
Very step by step and instructional, thanks brother
Great video Donny. Thx
Thank s for the videos!!!
Good advice Donny 👍👍👍👍😎😎
After all that, did it start? Maybe i missed it
Hey donny what fuel mixture you recommend for 372 xp. Great videos
Nice video
Good information Donnie question: what is the brand of the vacuum pump in the video where can you purchase one. Thanks
great video thank you
Hey Donny, is there a colder Plug for my 372 Husky than ngk 7?
An eight or nine to use on my 210 psi compression Racer thats fitting under the Cover?
Great Video , i had to learn that a sparking Plug dont have to fire when threaded in , when i was 17 and trying to fix my Lawnmover.
So Plugs can be Assh….
Once learned, never forgotton.
Ngk plug 7 is good 8 is a cooler plug . 9 and 10 and so on . If that helps. Read the plug after a few good hard cuts. Good luck
@@ronalddietz1628 i know that eight is cooler than 7 . The Problem is, to find a small Plug that fits. I ordered a bpmr8y Plug. Thats better than nothing. I think there is no 9er Plug to find in that Dimension.
Also what was the number on that 8 plug...my 661 has the 7
What is the spark plug number
well done for an old bloke
What NGK 8 are you running? A8?
Why is a max flow not as good on a 661?
Thanks for the tips. I've got 2 461s I love them so much. Damn near as heavy as my 066 but something about them is just so appealing.
I think he meant the std filters are no good on the 661
@@walkerscountrylife that makes more sense
Yeah he was saying the max flows are really the only ones you should use on the 661 & 500i as the oem filters are just not made air tight & the uni kits are too tight inside the stock cover that you have to clean it way too soon
Thank You!
What is the little cap on top of the gas tank ? My saw appears to be missing bc it’s leaks, and where can I buy it ?
Did I hear it is NOT recommended to use foam filter on 661?
The foam filter is great on 661
Ok great! 😅.
I appreciate you following up with me!!
Take care Sir.
What type pressure tester are you using?
Donny i realy could use help?? Have a almost new 661cm..has less than 10 or 12 tanks .it ran great ..still has factory groves in piston cylinder looks like new still.i cleaned it and put itcaway for about nine months or so in a box at home..it is so hard to pull even with decomp pressed..i checked fuel filter and put new plug .clean gas checked the intake boot ?? As i said it ran great its like new ..but it will not start almost broke my arm trying.and did several times 3 days in a row ..to make sure it wasn't flooded i checked the gap on the coil .i cannot find anything ..i do hear a swooshing sound when i pull the cord but assume thats just piston going up 👆. It has serious compession but i didnt remove t h e carburetor...yet..its like its not gett8ng fuel or spark..kinda like this video ..i also tryed 2 plugs
I thought the meeting lever should be adjusted with the gasket of, i.e. right off the carb body. Have I been doing it wrong?
Zama carbs you set without gasket
@@donnywalker4691 how about walbro?
The goat
I repair chainsaws so I know what you're doing but for newbies you really need to have closeups to show what you are doing.
I WAS THINKING PLUGGED MUFFLER SCREEN...
NICE CALL ON THE SMOOTH FINNISH. THE ROUTER WILL MAME YOU. TH-cam SOME ROUTER HANDLING TIPS BEFORE SOMEONE GETS GORED . AND TO SAFETY MEETING MINUTES
Throw it in dumpster and buy a husky 🤣🤣
572 for the win
husky not ammune to a off day
Let me know which dumpster it’s in.
He knows how to start it like most husky owners😂.
You know how you get them started you hit them with a hammer and then go buy a husky🎉
Husky is nice and I would own one but because I live in Stihl county I didn’t want the neighbors to talk bad about me. 🥸
I needed a good laugh husky hahahahahahahahahahahhs
HI DONNY IVE seen that be 4 when the chainsaw won't start most the time it is the sparkplug even though it shows good the gas 2 day is no good no more either IVE took a sparkplug and cleaned it W small file and W a wire brush and after U have cleaned it it won't still start take old sparkplug out and throw it in the trash can 🥫😊😊 put a new sparkplug 😊😊 and it will start right 👉 😊 up the gas 2 day ruins the sparkplugs it shorts them out 😮😮OMG 9 14 2O23