Thanks for the video! I bought my first home in 2023. Whoever did the bathroom in the house used grout in the corners of our shower. The grout has now cracked, so I've taken it out and will be applying silicone. Never done it before, so this was extremely helpful!
I’ve been putting off the task of resealing our bath for 4 years (since we moved in!) and I was half inclined to just get a handyman in to do it as I was scared of doing it wrong. This video (and your other video on removing sealant) were so helpful - you explained each step really well and gave me the confidence to have a go myself. It took me several hours to do but I’m pleased with the results, so thank you!
This was so helpful, thank you for such a clear demonstration, all the tips & tricks. Baby wipes was a game changer! Doing the sealant is my absolute nemesis but this time I made a decent job of it thanks to you!
Loved this video. I'm a bit OCD and a lady DIYer. Really helpful. Could do with spending a few months as your apprentice. Had various tradesmen out for jobs but it's so hit and miss I'd rather save the money and have a go myself.
I’ve always used masking tape and my finger haha. This was a really clear and detailed commentary on how to use a profile tool so I’m going to try that on my kitchen tiles. I hadn’t realised how long you can leave the silicon bead before profiling it, I always thought it would skin over.
Thanks for posting your silicon sealant videos. Good preparation by clearing out the old sealant and using the Cramer sealant/grout tools certainly helped me get a decent bond and finish with my Matki shower base that had started to leak four years after installation. Cheers.
Some good tips, thanks. I was doing my bath today and I also have uneven tiles so tried masking tape put on tight to the tiles, acted as a guide to lessen the step. I bought some Silicone that was specially for bathroom - not much tooling time like yours so only got 5 mins before started going off - something to bear in mind when buying! Thanks
First time doing this and it's not perfect but I'm actually proud of how it came out! Was able to do a very decent job by following your tips. Thank you :)
Nice one 👍 I can't stand going behind taps 😫 you have to know when to stop when doing this sometimes don't you, there's been a few occasions when I got it looking 95% good and tried to get one little bit then made it loads worse! Haha I always get through a load of toilet roll when I do my sealing 😂 only use wipes sparingly as they're more expensive. The no nonsense wipes from screwfix are always on hand though ✌️
You need to shop in Aldi, 50p a pack for wipes. I pinch them from my boys room! You're right about over working it, too much and it goes lumpy. Practice makes perfect, problem is I don't practice much! Thanks for watching and keep up with the graft on your place. Looking good, the hard work will pay off in the end 👍
If I am a diy man and had a new bath I'd be asking the fitters why they have done half a job. If i need to seal it. Something I did recently after the kitchen floor replaced and they didn't seal and didn't even bother re fitting the bottom of the cupboards. Its almost like because there is a lack of skilled tradesmen I should be happy for a non complete job. Trades in uk are taking a liberty with the customers. Thanks for your advice tho. Going to now finish a job I paid a apparently reputable company to do. With your advice I can go do it.
Well not sure if you've seen my latest video, but I had a rant about exactly that with a window fitter! Video here in case you'd like to watch it - th-cam.com/video/jsoSjwEkWXI/w-d-xo.html. Best of luck with the sealant.
Sometimes the bath sides drop when a human steps in so it’s better to fill the bath then do this. The silicone sets with the bath dropped as much as it’s going to - so when it is stepped into it has less chance of breaking the seal under the bead.
Thank you for such a plain talking video. As a total novice, I am confident enough now to give it a go. Hopefully it will be fully sealed, and being even half as neat as yours will be a bonus!
Very Professional presentation, Script, video, clarity of script and step by step clear direction of tools ,method of use. Excellent all round. Follow the instruction and the job will present as a prfect, satifying result. You can now put your house guests in the bath again.Thanks result.
bro, hands down the best beginner diy caulking tutorial video i have seen...getting ready to caulk today for the first time so i have been binging this past week on tutorials...thank you. One question, wont putting a screw in the tip mess up the tip for the next time you are ready to caulk by potentially making it bigger or making the sealant come out "screwy" (just a though i had today but i have seen this trick on other videos). I'm probably overthinking. Thanks for the video!!!
These profiling tools only work well if the tiles have been laid very evenly and flat. Also, if the gap between the edge of the bath and the tiles is more than 5mm then you will be left with a huge wedge of silicone. In this case, use the good old finger & masking tape technique with a finger dipped into white spirit to get a nice smooth and even finish. Lastly, if you have to silicone vertical walls as well, it is best to do these first and then allow it to dry overnight before doing the horizontals - this way you should get a much neater corner. In case you're wondering, silicone does stick to silicone just like sh!t sticks to a blanket.
Very good video and clear explanation thank you I will give it a go soon, hope I can do it like being shown here and yes we do appreciate the effort you have put in 😅😅😅
Yes appreciate the effort you put into these videos. I need to put sealant outside edge of my shower. I did my electrics with your expertise help, works fine. Now, I want to put a single light in my attic, with a light switch? Just need to look if you have made a video on that.
Profiling tool… or lolly stick. I’m new to DIY and watched loads of vids on sealant. The best tool I’ve seen used is a lolly stick. It leaves a decent amount of sealant behind so both sides of the join are covered with helps eliminate getting water behind the sealant and thus helping to eliminate the pesky black stuff and also looks finished well too.
@@POUSEaroundtheHOUSE Profile tool is better than lolly stick. An unused credit card with corners cut to different angles could be used as a profile tool.
Thanks for another great vid Pouse. You’ve shown me so many practical and useful tips for working on my house. Didn’t know about the wet wipes. I’ll give them a try.
I hope your old pant are 100% cotton :-P good vids bro, can you do a sealant vid on kitchen appliances such as cookers and sinks...asking for a friend lol
Try the soft silicon tool now available. I’ll never go back to “hard” plastic ones. Also I always wondered why they were 90 degrees. 85 is way better. Surprise surprise! Now available.
Dear Pouse, I have a vertical bead of sealant in the corner of my shower running from the ceiling to the base of the shower tray. I need to replace this bead of sealant along with the bead that runs along the base of the shower tray. Does it matter which one I do first? Many thanks.
I'd do the horizontal first then the vertical so a clean bead will run down over the horizontal ensuring water runs off nicely. Any small ledges of sealant coukd hold water which over time could start to go moldy. Hope that helps 👍
Thanks for the feedback. There will be a video where stairs are fitted, just haven't uploaded it yet. I've filmed the whole of the loft conversion it's just finding time to edit all the footage! Thanks for watching👍
@@POUSEaroundtheHOUSE thanks for the reply looking forward to it. And love all the videos. They inspire me to do work round my own house. Obviously everything checked by the professionals.
Another great video. I find pushing the gun rather than pulling it gives a better finish. I use soapy water on the tool to get a smoother finish. As for taps, they're a pain. As somebody else said, you need to know when to stop and leave it. 👍
Came on here because I'm having a right nightmare applying black sealant on white tiles. When I go over it with the tool it is spreading the black everywhere and when it first happened I thought oh I'll just wipe it off and clean it up as i go but obviously when i go back to wipe off the excess it ruins the neat line and it is a nightmare to get off. Ive been watching so many videos and everyone seems to have a neat line when the tool is used whereas i have a neat line but the sealant just spreads out. No idea if it is because of black sealant - i dont think so! Anyway ... Ill continue watching videos to find the answer lol
Did you have any luck? I wonder if there's something on the bath tub reacting with sealant causing it to spread? Or wrong type of sealant? Hope it worked out for you.
And most importantly - YOU MUST FILL THE TUB FULL OF WATER WHEN APPLYING THE SILICONE, AND LEAVE IT FULL WHILE IT CURES. This is mandatory in almost all instances, especially if there are any larger gaps. Failure to do so has made many a home reno person do it TWICE.
There is a great deal of good advice in this video, but there is a commercial element in it, as in many others. I needed to renew the sealing in my shower cubicle, it was leaking. I'm no DIY expert & followed to the the letter the instructions in this video & two others, results poor. Scraped the 3 poor results out & tried an anamalgam of all 3, perfect! Here's how to get perfect results: Scrape out the old sealant & finish it with a hard toothbrush, make sure all surfaces are bone dry with a good hair dryer. Now we're ready to apply the new sealant: have a small bowl of warm soapy water in your cubicle & plenty of newspaper to hand when you start; (you'er on your knees here,) don't stream the sealant, dot it every one centimetre or so; then spread the sealant with your finger wettet in the warm, soapy solution; you will find it clings to the surfaces, spreads easily & fills the gaps...job done!
There's no commercial element to the video. It's not sponsored and I state that other tools are fine. I do have amazon links in the description but there is no obligation to buy through these links. It's just how I do my sealant. Hope that makes sense 👍
I worked with a painter n decorator over 20 years ago. And he would not let me clean the Upvc windows with white spirit saying it affects the shine on the Upvc. That I don't no if it is the case. Does anyone no? Please comment. Thank you very much.. 😊 He would clean with sugar soap powder mixed in warm water n sponge..
Our tap is almost touching the tile due to the addition of tile backer boards used to square poor solid walls. Really not looking forward to trying to make a good job of it behind the tap because the silicone is going to have to go over the tap pillar
At last! He suggests white spirit! I’ve been doing that a few years now. Couldn’t understand why the product suggests turpentine. Isn’t that an oil? Why would you want oil under your silicon. It does not dry fast and probably leaves residue. Methylated spirit an option, but it does not dissolve old silicon and soap.
Thanks for the video! I bought my first home in 2023. Whoever did the bathroom in the house used grout in the corners of our shower. The grout has now cracked, so I've taken it out and will be applying silicone. Never done it before, so this was extremely helpful!
No problem and well done on doing it yourself 👍
@@POUSEaroundtheHOUSE good
And after removing the old silicone, I then watched this and managed to apply new stuff. Both your videos were so helpful. So 10/10. Thanks Pouse! 👍🏻
No problem 👍
Concise, clear, no camera wobble - brilliant. Thankyou. At last, I know how to do it!
You're welcome!
Pouse, your demonstration was superb! My past struggles with sealant faded away and I now feel confident enough to try again.
Glad it was helpful!
As you mentioned, I do appreciate the effort you put into these videos! Helped me get out of a messy situation!!
Excellent!
I’ve been putting off the task of resealing our bath for 4 years (since we moved in!) and I was half inclined to just get a handyman in to do it as I was scared of doing it wrong. This video (and your other video on removing sealant) were so helpful - you explained each step really well and gave me the confidence to have a go myself. It took me several hours to do but I’m pleased with the results, so thank you!
That's a great result, well done 👍
Great tip seeing the screw in an opened bottle of sealant!
Glad you liked it 👍
This was so helpful, thank you for such a clear demonstration, all the tips & tricks. Baby wipes was a game changer! Doing the sealant is my absolute nemesis but this time I made a decent job of it thanks to you!
Glad you found it useful 👍
Loved this video. I'm a bit OCD and a lady DIYer. Really helpful. Could do with spending a few months as your apprentice. Had various tradesmen out for jobs but it's so hit and miss I'd rather save the money and have a go myself.
Good attitude, and best of luck with it 👍
Nice one Pousey. Solves some of the mystery of 'how do they make it look so neat when it looks so crappy my own trys'. Thanks.
No problem.
I’ve always used masking tape and my finger haha.
This was a really clear and detailed commentary on how to use a profile tool so I’m going to try that on my kitchen tiles. I hadn’t realised how long you can leave the silicon bead before profiling it, I always thought it would skin over.
Hope it went well 👍
Found this really helpful. I liked that it was realistic and not 100% perfect.
Glad it was helpful 👍
Great video, using wet wipes was a top tip and I made a lot less mess than normal!!
Glad to help!
Aug ‘24, thank you so much for your detailed instructions on removing and reapplying sealant. Shower done and I’m pleased with results.
Glad to help, great work 👍
Thanks for posting your silicon sealant videos. Good preparation by clearing out the old sealant and using the Cramer sealant/grout tools certainly helped me get a decent bond and finish with my Matki shower base that had started to leak four years after installation. Cheers.
Glad to help, good work 👍
thank you. i feel much more confident about tackling this job now.
Best of luck!
Great, detailed demonstration. Will definitely help me going forward 👍
Excellent. Thanks for watching 👍
Some good tips, thanks. I was doing my bath today and I also have uneven tiles so tried masking tape put on tight to the tiles, acted as a guide to lessen the step. I bought some Silicone that was specially for bathroom - not much tooling time like yours so only got 5 mins before started going off - something to bear in mind when buying! Thanks
Thanks for the tips 👍
First time doing this and it's not perfect but I'm actually proud of how it came out! Was able to do a very decent job by following your tips. Thank you :)
Amazing!
Nice video; helpful, easy to listen to, clear instructions.
Glad it was helpful!
Thank you for all the tips, this made the job really easy 🎉
Glad it helped!
Nicely done. Appreciate the commentary & effort.
Thanks 👍
brilliant - clear, detailed and good to listen to - lots of great advice.
Glad you enjoyed it 👍
Thank you enjoyed your helpful tips and videos for removing and applying sealant
Glad they were useful, thanks for watching 👍
Nice one 👍 I can't stand going behind taps 😫 you have to know when to stop when doing this sometimes don't you, there's been a few occasions when I got it looking 95% good and tried to get one little bit then made it loads worse! Haha
I always get through a load of toilet roll when I do my sealing 😂 only use wipes sparingly as they're more expensive. The no nonsense wipes from screwfix are always on hand though ✌️
You need to shop in Aldi, 50p a pack for wipes. I pinch them from my boys room! You're right about over working it, too much and it goes lumpy. Practice makes perfect, problem is I don't practice much! Thanks for watching and keep up with the graft on your place. Looking good, the hard work will pay off in the end 👍
Thank you for your very useful and informative videos.
You are welcome!
If I am a diy man and had a new bath I'd be asking the fitters why they have done half a job. If i need to seal it. Something I did recently after the kitchen floor replaced and they didn't seal and didn't even bother re fitting the bottom of the cupboards. Its almost like because there is a lack of skilled tradesmen I should be happy for a non complete job. Trades in uk are taking a liberty with the customers. Thanks for your advice tho. Going to now finish a job I paid a apparently reputable company to do. With your advice I can go do it.
Well not sure if you've seen my latest video, but I had a rant about exactly that with a window fitter! Video here in case you'd like to watch it - th-cam.com/video/jsoSjwEkWXI/w-d-xo.html. Best of luck with the sealant.
@@POUSEaroundtheHOUSE as a DIY housewife from India, thanks for your videos, helps immensely when money is tight
@devyanilimaye8560 no problem, glad to help 👍
You get what you pay for.
Many thanks. Screw ing silicone bottle was really great idea
Glad to help.
Sometimes the bath sides drop when a human steps in so it’s better to fill the bath then do this. The silicone sets with the bath dropped as much as it’s going to - so when it is stepped into it has less chance of breaking the seal under the bead.
Thanks for the feedback.
Thanks for making it fun with your commentary.
Not sure I've been called fun before 😂 Thanks for watching 👍
Thank you for such a plain talking video. As a total novice, I am confident enough now to give it a go. Hopefully it will be fully sealed, and being even half as neat as yours will be a bonus!
Hope it went well 👍
Very Professional presentation, Script, video, clarity of script and step by step clear direction of tools ,method of use. Excellent all round. Follow the instruction and the job will present as a prfect, satifying result. You can now put your house guests in the bath again.Thanks result.
I'm not letting guests anywhere near my bath 😂. Thanks for watching 👍
Great tip about filling the bath, thanks!
No problem 👍
very helpful. I've been stuffing up my sealant for years. Can't wait to do it properly this weekend.
Hope it went well.
Good infor how to get it done . Thanks so much .
Glad it was helpful!
Any update on the Sealent? Has it so far prevented mould? Sealing my sink and bath tomorrow thanks for your video!
Best videos to follow for beginners
Glad you enjoyed it.
Itd be great if you could share any tips on finishing internal corners, horizontal and verticle.
bro, hands down the best beginner diy caulking tutorial video i have seen...getting ready to caulk today for the first time so i have been binging this past week on tutorials...thank you. One question, wont putting a screw in the tip mess up the tip for the next time you are ready to caulk by potentially making it bigger or making the sealant come out "screwy" (just a though i had today but i have seen this trick on other videos). I'm probably overthinking. Thanks for the video!!!
You're overthinking it! 😂 Hope it went well, best of luck 👍
These profiling tools only work well if the tiles have been laid very evenly and flat. Also, if the gap between the edge of the bath and the tiles is more than 5mm then you will be left with a huge wedge of silicone. In this case, use the good old finger & masking tape technique with a finger dipped into white spirit to get a nice smooth and even finish.
Lastly, if you have to silicone vertical walls as well, it is best to do these first and then allow it to dry overnight before doing the horizontals - this way you should get a much neater corner. In case you're wondering, silicone does stick to silicone just like sh!t sticks to a blanket.
Thanks for the feedback 👍
Yup. Not sure where the silicone doesn't stick to silicone came from as it obviously does from my own experience.
Very good video and clear explanation thank you I will give it a go soon, hope I can do it like being shown here and yes we do appreciate the effort you have put in 😅😅😅
Thanks for the feedback 👍
Yes appreciate the effort you put into these videos. I need to put sealant outside edge of my shower. I did my electrics with your expertise help, works fine. Now, I want to put a single light in my attic, with a light switch? Just need to look if you have made a video on that.
Hope it went well, and yes I think I do have a vid on that, I'm just 2 years too late responding 😂
Profiling tool… or lolly stick. I’m new to DIY and watched loads of vids on sealant. The best tool I’ve seen used is a lolly stick. It leaves a decent amount of sealant behind so both sides of the join are covered with helps eliminate getting water behind the sealant and thus helping to eliminate the pesky black stuff and also looks finished well too.
Give it a go and let me know. I'm sticking to the profiling tool! Thanks for watching 👍
@@POUSEaroundtheHOUSE Profile tool is better than lolly stick. An unused credit card with corners cut to different angles could be used as a profile tool.
Thanks for another great vid Pouse. You’ve shown me so many practical and useful tips for working on my house. Didn’t know about the wet wipes. I’ll give them a try.
Glad to help 👍
Fantastic job ! Well done
Thank you!
Thank you! This was very helpful!
Glad it was helpful, thanks for watching 👍
Nice thorough video matey
Thanks 👍
Familiar North West accent. Thank you from Italy
Welsh! 😂 Thanks for watching 👍
Amazing videos, so helpful
Glad you like them!
thank you your video is very useful
Glad it was helpful!
I need to remove silicone from my shower tray and then apply new one. Do I have to remove it with a tool or is there any solvent to do the job?
Thank you for doing the video. Well explained. Can I please just ask, isn’t there a narrower profiling tool in the kit that would fit behind the taps?
Not in the kit. You can buy thin profiling tools online though. You'd think they would supply one! Thanks for watching.
Thank you. Very useful indeed 👍
Glad it was helpful!
Thanks for sharing with us your knowledge.
No problem.
I hope your old pant are 100% cotton :-P good vids bro, can you do a sealant vid on kitchen appliances such as cookers and sinks...asking for a friend lol
Try the soft silicon tool now available. I’ll never go back to “hard” plastic ones. Also I always wondered why they were 90 degrees. 85 is way better. Surprise surprise! Now available.
These are soft silicone, not plastic. Thanks for watching 👍
Excellent vid, very detailed, many thanks.
Glad you liked it 👍
Very helpful video thanx! 🎉
You're welcome!
Great video. Thanks. Very helpful x
No problem.
Dear Pouse,
I have a vertical bead of sealant in the corner of my shower running from the ceiling to the base of the shower tray. I need to replace this bead of sealant along with the bead that runs along the base of the shower tray. Does it matter which one I do first?
Many thanks.
I'd do the horizontal first then the vertical so a clean bead will run down over the horizontal ensuring water runs off nicely. Any small ledges of sealant coukd hold water which over time could start to go moldy. Hope that helps 👍
Hi pouse great video. Also love the videos. Especially the loft conversion videos. Is there a video where the stairs are fitted
Thanks for the feedback. There will be a video where stairs are fitted, just haven't uploaded it yet. I've filmed the whole of the loft conversion it's just finding time to edit all the footage! Thanks for watching👍
@@POUSEaroundtheHOUSE thanks for the reply looking forward to it. And love all the videos. They inspire me to do work round my own house. Obviously everything checked by the professionals.
good job my friend
Another great video. I find pushing the gun rather than pulling it gives a better finish. I use soapy water on the tool to get a smoother finish. As for taps, they're a pain. As somebody else said, you need to know when to stop and leave it. 👍
Good tips, thanks for the feedback Nick 👍
Dow is the best 💯👌👍
Thanks for the feedback.
thank you so much could i just ask do cut the nozzle straight or 90dg sorry its the frist time doing it i am sorry nerves thank you
Sorry I'm a bit late with this reply. As mentioned in vid, I cut at 45 but it's up to you.
Amazing video, Thanks a lot.
No problem
How did you take it out of the gun? I can’t take it out of gun
Watch at 6m50s I show how to push leaver to release the gun and pull back the metal rod. Best of luck 👍
Hi mate what size of the profile tool did you use for the bath?
I think it was 6 or 8mm. I'd have to check. Thanks for watching 👍
Great video mate, thank you
No problem 👍
Why do you make it look so easy?
Give it a go, it's not too bad. Thanks for watching 👍
I know someone who used gripfill (green tube) and painted it white...
Different! Thanks for watching.
Love the advice!
Glad to help.
Sista Kitchen and bathroom Silicon has a good Anti Mould property
I like to wipe it down with white spirits and a…. 🧐… an old pair of pants? 😂…… good job 👍. I hate siliconing but these tools are very useful!
It doesn't specifically have to be pants, that's just a fetish of mine! Thanks for watching 👍
Came on here because I'm having a right nightmare applying black sealant on white tiles. When I go over it with the tool it is spreading the black everywhere and when it first happened I thought oh I'll just wipe it off and clean it up as i go but obviously when i go back to wipe off the excess it ruins the neat line and it is a nightmare to get off.
Ive been watching so many videos and everyone seems to have a neat line when the tool is used whereas i have a neat line but the sealant just spreads out. No idea if it is because of black sealant - i dont think so! Anyway ... Ill continue watching videos to find the answer lol
Did you have any luck? I wonder if there's something on the bath tub reacting with sealant causing it to spread? Or wrong type of sealant? Hope it worked out for you.
Another great video buddy
Thanks for watching 👍
In tight places I use a damp finger and wipe it on soapy damp towels. Then switch back to tools.
Thanks for the feedback.
I was told that using finger caused black mould.
perfect thank you for this
You're very welcome.
Thanks for the tips
No problem
Lighter fluid or 91% isopropyl alcohol also clean well. For prep.
Thanks for the tip.
time for someone to invent a profile on a stick for that tricky tap area
There are some but they're a bit pricey!
Fill the bath with water before sealing for the belt and braces option.
Thanks for the feedback James.
Is your tub acrylic? I'm having trouble finding a silicone caulk that has good adhesion to acrylic
Incidentally, how does your shower screen not leak without a seal on the bottom edge - or is this a work in progress?
I took it off while doing the sealant as I needed to sealant around tge screen frame. Thanks for watching 👍
what is the purpose of the silicon . is this done for water proofing ?
To seal the bath to the tiles and stop water leaking down to the floor. So yes, water proofing.
Very❤😊 good thank you
No problem.
And most importantly - YOU MUST FILL THE TUB FULL OF WATER WHEN APPLYING THE SILICONE, AND LEAVE IT FULL WHILE IT CURES. This is mandatory in almost all instances, especially if there are any larger gaps. Failure to do so has made many a home reno person do it TWICE.
Why
Thank you
No problem.
Terrific
Prscticsl snd useful tips. Thsnk you/
Glad you enjoyed the video
Why does he use the flat edge at the taps &after that instead of the angle edge.
I noticed you did not use soapy water to finish over
I find that encourages mold sometimes. It's also not really required with the use of the sealant tool.
nice
Thanks
There is a great deal of good advice in this video, but there is a commercial element in it, as in many others. I needed to renew the sealing in my shower cubicle, it was leaking. I'm no DIY expert & followed to the the letter the instructions in this video & two others, results poor. Scraped the 3 poor results out & tried an anamalgam of all 3, perfect! Here's how to get perfect results: Scrape out the old sealant & finish it with a hard toothbrush, make sure all surfaces are bone dry with a good hair dryer. Now we're ready to apply the new sealant: have a small bowl of warm soapy water in your cubicle & plenty of newspaper to hand when you start; (you'er on your knees here,) don't stream the sealant, dot it every one centimetre or so; then spread the sealant with your finger wettet in the warm, soapy solution; you will find it clings to the surfaces, spreads easily & fills the gaps...job done!
There's no commercial element to the video. It's not sponsored and I state that other tools are fine. I do have amazon links in the description but there is no obligation to buy through these links. It's just how I do my sealant. Hope that makes sense 👍
I worked with a painter n decorator over 20 years ago. And he would not let me clean the Upvc windows with white spirit saying it affects the shine on the Upvc. That I don't no if it is the case. Does anyone no? Please comment.
Thank you very much.. 😊
He would clean with sugar soap powder mixed in warm water n sponge..
👍, thanks
No problem!
Our tap is almost touching the tile due to the addition of tile backer boards used to square poor solid walls. Really not looking forward to trying to make a good job of it behind the tap because the silicone is going to have to go over the tap pillar
Also interesting to see you've fit the shower screen bracket 90° to the bath. When I come to fit ours I think we'll have to do the same
At last! He suggests white spirit! I’ve been doing that a few years now. Couldn’t understand why the product suggests turpentine. Isn’t that an oil? Why would you want oil under your silicon. It does not dry fast and probably leaves residue. Methylated spirit an option, but it does not dissolve old silicon and soap.
I always use white spirits. Maybe I'll try turps and see what happens! Thanks for watching 👍
Pouse around the pants is back
Old pants and t-shirts everywhere! Those adidas shorts in the video just turned 25 years old. I like to get my moneys worth. Thanks for watching 👍
Thanks
Thanks for the 'super thanks' David! Really appreciate it 👍
16 TUBES LATER. This is why you see a receipt for the job with 23 tubes of silicone for the Bathroom.
I only used one and had some left over. Not sure why you'd use 23?