Lets goooo!! I used the Pheonix for yeearrrs. I even had the limited edition white version. Super excited we have the next gen power from you guys now too. Thanks for always crushing the game! I'm excited to get my hands on one of these. 🔥🔥
Thank you. I use your Phoenix power supplies. I am so overjoyed to learn of the Canvas Power Supplies. No joke, it's kind of a relief. I was worried about where my next power suppy was going to come from. Now I know. Thank you, again.
Sorry if my English doesn't make sense. I was just wondering about power supplies. Currently, I'm using 13 power outlets and I think I'm running out of power. I'm considering the 15-outlet version of this product, so I'd like to know the total power available and the capacity per outlet if all 15 are used!
I came here looking for this. Well done Walrus Audio. The fact that they made it compatible with systems other people might already have is so thoughtful and the main reason why I’ll choose them for expansion over buying another Ojai
so awesome guys! is there any instance that if you filled all the outlets of the power supply that it would overload the brick? hence the indicators showing power that's left?
Hey walrus could you help me understand why my (shall remain nameless) power supply make so much noise when it’s close to my HX stomp? I know other companies have fixed this problem (like Strymon, and I am assuming you guys!! ) looking to pick up a 15 very soon! Can I use a 2.1 dual port connector to 2.5 without any problems with this as well?? Thanks!!!
The hum you're talking about happens with some pedals when they are sitting directly on top of a power supplie's transformer. That's no fault of the brand of either the power supply or the pedal, it's just a byproduct of putting electronic devices next to each other sometimes. You could move the pedal or where the power supply is mounted to see if that helps. But you're right, with having a separate power brick, you should not have this issue anymore! Yes a 2.1 to 2.5 adapter should work!
So to be clear, the barrel cables have the same type of 2.1mm connector on both sides? So they could be plugged in forwards or "backwards" potentially and work the same? And they all come in the straight to right angle variety, correct?
I just ordered a Canvas 15 for my first Pedaltrain Classic 1. I'm thankful for the timing because I purchased some antiquated power supplies and realized that I had to return them. 🎛️🎸⚡🎶🔊☠️
Can you daisy chain pedals into a single outlet? With the cioks, you can daisy chain a few pedals, assuming you don’t exceed the total mA per outlet. So the cioks 7 could theoretically power 21, or more, pedals. I’ve read through the information on the Walrus site, and Sweetwater, and don’t see this mentioned anywhere.
Yes, but keep in mind that any pedals you daisy chain are no longer receiving isolated power and you may introduce noise. That goes for any power supply you do that with!
For sure, the thing that makes these power supplies great is that each output is 500 ma, which can be used to power the big digital fellas. Most power supplies have only one or two hot enough for that and the rest are rated lower.
I was thinking the same thing. There doesn't seem to be any mention about how to mount the power brick under a board (like a Classic 2, for instance), and all the pictures I've seen show brackets for the power supply, but not for the brick, itself. I'd prefer not to have to use Hook and Loop for that, but brackets designed specifically for the power brick - if they exist. Aside from that (having to use a separate power brick), I think this is nearly perfect design and I'd like to try one out the Canvas 15 in the near future.
The adapter mentioned should work. The Stomp says that it requires 3A, but in our tests it runs fine at 1A so you could use the 2.1 to 2.5 current doubler adapter. Or hang tight till this summer... 😉
Watched the whole video waiting for a reason that this better than or at least competes with the CIOKS options. Sad to see that there isn’t any reason - it’s marginally less functional and also more expensive.
I think these are better for my needs. I just looked into the dc 10 and compared it to the canvas 8. The dc 10 has power ratings of 100 ma each for 1-4, 200 ma each for 5-6, and 400 for the rest, meaning you can only use two big boy digital pedals before you start pushing it beyond its recommended specs. The reason why people are stoked on these is the 500 ma for every single output, that what makes these slap so hard. Also the form factor of these are better especially the toggles for the different DC voltages. The DC from CIOKS just has the 9 v and 12 v right next to eachother, which could lead to mistaken voltage pairings more frequently IMO. Also it gives the illusion of a 10 output power supply, but the outputs 7-8 and 9-10 each share a max load of 400 ma so it's really an 8 output power supply for all intents and purposes.
@@onionheadguy7094 this is all fair commentary - but the DC8 is the old transformer based solution from Cioks which was released all the way back in 2011. So it’s fair to say that this could be considered better than that. The Cioks DC7 offers far more flexibility and output options at a lower price. It’s their latest release with non transoidial power conversion and really the only fair comparison to draw. Each output on the DC7 is 660mA so that blasts the 500mA of this walrus. Especially when it comes to things like microcosm and other big box juice sucking pedals. The ONLY advantage this gives you is that is doesn’t come with Cioks unique cabling which I personally find a bit annoying.
FWIW the Microcosm only requires 400mA. Our barrel cables also aren't proprietary. They are custom low profile so they fit in tighter spaces, but should you lose one, you can swap in 2.1mm easily from any other company. 🙂
It's shame about the power brick. Even still, this is a great form factor - especially the larger 22. I would have definitely ordered one but just got a Mono supply which is the same design.
@@tylerd1143 Yes, it would have been perfect without it. I didn't think about how large the power brick would be when ordering. What I mean is that I would have held out for the Walrus model if I knew it was coming even though they are the same design. If only someone could build this form factor with an internal power adapter.
Wait....so you dont need to drill a million holes in your board to mount these power supplies? I can just screw and tighten it at the bottom? If thats the case, then my future used pedalboarda will actually have a good resale value.
The power 5 mounts to smaller boards with C brackets that require zero drilling. The larger sizes have L Brackets that require 4 screws. You can see how they mount here - th-cam.com/video/UH4V5TbXiZQ/w-d-xo.html
![ไลฟ์สุ่ม iPhone 295 บาท... โกงมั้ย?[ โกงมั้ยครับ ep.97 ] | DOM](http://i.ytimg.com/vi/gdstHEE4UUE/mqdefault.jpg)
Now tempted to buy 3 Power 22s just so I can power 66 pedals🔥
not all heroes wear capes.
Walrus literally makes the best pedals, truly the best hardware work for guitarists.
Thank you!
I have no need for the power 22, but my God what a feat! I want it just to say I have it!😂
haha, we won't fault you for that!
Will 1000% own one of these someday. Or multiple. Love the link feature
Thanks!
Lets goooo!! I used the Pheonix for yeearrrs. I even had the limited edition white version. Super excited we have the next gen power from you guys now too. Thanks for always crushing the game! I'm excited to get my hands on one of these. 🔥🔥
Thanks!
Thank you. I use your Phoenix power supplies. I am so overjoyed to learn of the Canvas Power Supplies. No joke, it's kind of a relief. I was worried about where my next power suppy was going to come from. Now I know. Thank you, again.
Thanks!
This is perfect! Got the 15 ordered already 😀 exactly what I needed.
Thank you!!
very happy with my power 8, walrus audio killed it
So you can charge your Fender Acoustasonic with the USB-C port on the 8/15/22? Sold.
Sorry if my English doesn't make sense.
I was just wondering about power supplies.
Currently, I'm using 13 power outlets and I think I'm running out of power.
I'm considering the 15-outlet version of this product, so I'd like to know the total power available and the capacity per outlet if all 15 are used!
Definitely gonna miss the 120VAC out from the Phoenix. Are you building any PSU's with that still? It's so nice to plug my amp into the Phoenix
That was a great feature! But you can snag something like this for less than $10 and still get the same results! a.co/d/bKbamwa
@@walrusaudioeffects thanks! That’s awesome I had no idea 🙏🔉
Will these also link to a Strmon Ojai which also has 24v in/out?
Yes! Note to put the Canvas first in the chain if you want the power meter to display correctly.
@@walrusaudioeffectsSICK
I came here looking for this. Well done Walrus Audio. The fact that they made it compatible with systems other people might already have is so thoughtful and the main reason why I’ll choose them for expansion over buying another Ojai
Is the 12v outlet all good with Eventide H90 ?
This is important to me too 🤔
so awesome guys! is there any instance that if you filled all the outlets of the power supply that it would overload the brick? hence the indicators showing power that's left?
It wouldn't overload it, you just wouldn't get enough power delivered some pedals.
Hey walrus could you help me understand why my (shall remain nameless) power supply make so much noise when it’s close to my HX stomp? I know other companies have fixed this problem (like Strymon, and I am assuming you guys!! ) looking to pick up a 15 very soon!
Can I use a 2.1 dual port connector to 2.5 without any problems with this as well??
Thanks!!!
The hum you're talking about happens with some pedals when they are sitting directly on top of a power supplie's transformer. That's no fault of the brand of either the power supply or the pedal, it's just a byproduct of putting electronic devices next to each other sometimes. You could move the pedal or where the power supply is mounted to see if that helps. But you're right, with having a separate power brick, you should not have this issue anymore!
Yes a 2.1 to 2.5 adapter should work!
@@walrusaudioeffects thanks for replying! I have one in my sweetwater cart now and will be purchasing soon!
Quick question here. Is it possible to connect to Ojai of Strymon by 24V thru cable? If so I'd love to buy them.
yup! You'd just want the Canvas to be first in the chain so the power meter displays properly.
So to be clear, the barrel cables have the same type of 2.1mm connector on both sides? So they could be plugged in forwards or "backwards" potentially and work the same? And they all come in the straight to right angle variety, correct?
Correct!
How would you power an HX Stomp?
with the walwart that is included with it. Until this summer... 😉
You could also get the HX stomp voodoo labs cable that does the dual 2.1 to 2.5 that the HX needs😁
Unless walrus says linking two ports is bad
I just ordered a Canvas 15 for my first Pedaltrain Classic 1. I'm thankful for the timing because I purchased some antiquated power supplies and realized that I had to return them. 🎛️🎸⚡🎶🔊☠️
Thanks for the order!
Powerful
Need to get my hands on a power 8!
Do it!
Can you daisy chain pedals into a single outlet? With the cioks, you can daisy chain a few pedals, assuming you don’t exceed the total mA per outlet. So the cioks 7 could theoretically power 21, or more, pedals.
I’ve read through the information on the Walrus site, and Sweetwater, and don’t see this mentioned anywhere.
Yes, but keep in mind that any pedals you daisy chain are no longer receiving isolated power and you may introduce noise. That goes for any power supply you do that with!
Can it safely power a Strymon timeline & Big Sky along with other pedals?
Absolutely
@@walrusaudioeffects okay take my paycheck
I mean, 15 Timelines and it still wouldn’t be a problem if you’re into that sort thing.
For sure, the thing that makes these power supplies great is that each output is 500 ma, which can be used to power the big digital fellas. Most power supplies have only one or two hot enough for that and the rest are rated lower.
would be nice to compare these to the ciocks which are my favorite
I was thinking the same thing. There doesn't seem to be any mention about how to mount the power brick under a board (like a Classic 2, for instance), and all the
pictures I've seen show brackets for the power supply, but not for the brick, itself.
I'd prefer not to have to use Hook and Loop for that, but brackets designed specifically for the power brick - if they exist.
Aside from that (having to use a separate power brick), I think this is nearly perfect design and I'd like to try one out the Canvas 15 in the near future.
🌈🔌⚡️
Awesome job y’all 👏🏻👏🏻👏🏻
Thank you!! 😁
Wow! Well, done!
Thanks!
Are C brackets sold separately?
C brackets are included with the power 5 and L brackets are included with the 8,15, and 22!
@@walrusaudioeffectscould I use a c bracket with the 8 to fit under my pedaltrain metro 24? Apologies if I missed this in the video
@@_lowcountry The 8 should work fine with the C bracket, but the larger ones need to be used with the L brackets.
Is that a JHS pedal?
Would these be able to power the hx stomp? Anything special I need to do about connection to hx stomp if it can?
For my HX stomp I use the voodoo labs 2.1 dual port connector to the HX stomp 2.5 connector. I’d recommend that since it’s still a 2.1 adapter 😁😁
The adapter mentioned should work. The Stomp says that it requires 3A, but in our tests it runs fine at 1A so you could use the 2.1 to 2.5 current doubler adapter. Or hang tight till this summer... 😉
Man where was that 22 when i got my Zuma and Ojai already with a few daisy chains 😭
Hi Guys, what is the solution for a HX stomp? is there a 'cioks crux' option?
Are the Phoenix and Aetos discontinued?
Yes. Dealers may still have left over stock or they should be pretty easy to find in the used market.
Watch your back Strymon!
Watched the whole video waiting for a reason that this better than or at least competes with the CIOKS options.
Sad to see that there isn’t any reason - it’s marginally less functional and also more expensive.
I think these are better for my needs. I just looked into the dc 10 and compared it to the canvas 8. The dc 10 has power ratings of 100 ma each for 1-4, 200 ma each for 5-6, and 400 for the rest, meaning you can only use two big boy digital pedals before you start pushing it beyond its recommended specs.
The reason why people are stoked on these is the 500 ma for every single output, that what makes these slap so hard.
Also the form factor of these are better especially the toggles for the different DC voltages. The DC from CIOKS just has the 9 v and 12 v right next to eachother, which could lead to mistaken voltage pairings more frequently IMO. Also it gives the illusion of a 10 output power supply, but the outputs 7-8 and 9-10 each share a max load of 400 ma so it's really an 8 output power supply for all intents and purposes.
@@onionheadguy7094 Take a look at the DC-7 with a DC-8 expander for 660mA at 9Vs.
@@onionheadguy7094 this is all fair commentary - but the DC8 is the old transformer based solution from Cioks which was released all the way back in 2011. So it’s fair to say that this could be considered better than that.
The Cioks DC7 offers far more flexibility and output options at a lower price.
It’s their latest release with non transoidial power conversion and really the only fair comparison to draw.
Each output on the DC7 is 660mA so that blasts the 500mA of this walrus. Especially when it comes to things like microcosm and other big box juice sucking pedals.
The ONLY advantage this gives you is that is doesn’t come with Cioks unique cabling which I personally find a bit annoying.
FWIW the Microcosm only requires 400mA. Our barrel cables also aren't proprietary. They are custom low profile so they fit in tighter spaces, but should you lose one, you can swap in 2.1mm easily from any other company. 🙂
@@walrusaudioeffects it’s a nice feature 👌
Man, I was just looking at replacing my MXR iso brick.
Can i Connect my boss análog Pedals at this power supply?
Yes, as long as they are 9V and need 500mA or less. There are variable ports with 9-18V as well!
Could these power a Quad Cortex?
No, but we may have more things to talk about this summer... 😉
can anyone help me why is it if i turn the gain of thedistortion or overdrive pedal to full gain,it creates feedback???
"my hands look old" lol - me everyday
Good thing I just started working at Sweetwater…sure would be a shame to be able to power 66 pedals
Que chingonas!1
My wireless can charge via usb so thats pretty cool
It's shame about the power brick. Even still, this is a great form factor - especially the larger 22. I would have definitely ordered one but just got a Mono supply which is the same design.
Shame? But you bought a unit that has a power brick anyway?
@@tylerd1143 Yes, it would have been perfect without it. I didn't think about how large the power brick would be when ordering. What I mean is that I would have held out for the Walrus model if I knew it was coming even though they are the same design. If only someone could build this form factor with an internal power adapter.
JHS Overdrive hello???
Wait....so you dont need to drill a million holes in your board to mount these power supplies? I can just screw and tighten it at the bottom? If thats the case, then my future used pedalboarda will actually have a good resale value.
The power 5 mounts to smaller boards with C brackets that require zero drilling. The larger sizes have L Brackets that require 4 screws. You can see how they mount here - th-cam.com/video/UH4V5TbXiZQ/w-d-xo.html
Red hair dude seems like the guy who’s always clowning around when everyone else is trying to work. Stop clowning around red hair dude!
He started the company, pretty sure he can do whatever he wants Dave
Listen flam, stop trying to start a fight
@@davedraws76 Hey that's Mr. Sanders to you
@@flam-sandersforgive me Flam…I mean Mr. Sanders
completly overpriced!! just a notebook power supply + splitting some filtering etc.... stop scammin people..
I hope that one day some company will have a power supply that feeds a QC, plug and play. No need for more expensive accessories like cioks crux 😢😢😢
🙂
@JHS what's with that JHS overdrive pedal??? @walrusaudioeffects
its a throwback to april fools a couple years ago.
@walrusaudioeffects You got me all hot and bothered... what a shame :-(
How does it fit with a Temple Audio board?????
dual lock works great!