2015 Toyota RAV4 | Water Pump, Tensioner Pulley, Belt Replacement
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2024
- Welcome back to the channel
In this weeks video I show you how to replace a water pump along with the serpentine belt and serpentine belt tensioner pulley on a 2015 Toyota RAV4 2.5 L four-cylinder mated to a all wheel drive automatic transmission. This is definitely a job that you can potentially do at home provided you take the precautions needed and watch the full length video. Remember if you are going to do this job at home please use jackstands when getting underneath your car and don't dispose of your coolant irresponsibly please take it to a recycling plant or place where you can dispose of it responsibly. I hope you find the video helpful as well as entertaining, if you do please hit that subscribe button to support my work.
As always thank you for watching we will see you in the next one...
You're funny. Thanks for the lighthearted instruction during my complete meltdown.
No problem my friend. Thank you for watching I'm glad you found the video useful.
Just did a Water pump and tensioner on 2016 Rav4. Not to bad, hardest part was the belt lmfao.. my tip is is the same as yours. Get the belt on the edge of the Alt pulley and walk it on by spinning the crank.
Love it
I own a 2013 2.0L Rav4, same gen as the one on the vídeo. I'm searching the belt size but I can't Just find the correct size. Do you know If It is the same as the one you installed on this one? (6PK1255)
Hello my friend. Unfortunately I don't know if it is the same size as the one that I installed however the best advice I can give you would be to take your VIN number and find out from dealership what the correct part number is. Once you get the Toyota part number you can then cross it online to see what an aftermarket part number would be.
@@JimmysAutoClinic Rock Auto shows the same belt for the 2013 RAV4, 2.5L. Did not see a 2.0L listed.