What thickness is that on the outer arches and the main rails? What method do you use to bend your parts? A rosebud on a torch and heat it up till you can hammer it with a mallet? Nice work homey. I’m stuck out here in Jersey building my 82 Monte with no help or guidance because no one wants to give up info not even the shops that I bought parts and kits from smh. TH-cam is my only resource at this point, so I appreciate you showing all this.
I have a 63 frame I want to use on my 1964, I'm not ready for hydrolics yet but I want to do the frame first...I want it to be strong enough to handle as crazy as I want to go... I would like a rough estimate to do my frame like that...? How do I get in contact directly with you to get a time frame, deposit amount, etc.?
Wats up man good work I’ve been watching your videos but how do we get estimates I have my 83 regal I’m working on the engine I was thinking of taking just the frame to someone to reinforce and make it hydraulic ready nothing big or show just reinforced for family cruising, 3 wheel and maybe now and then a small hop to show off you know what I mean… mostly family fun cruiser. But yea I don’t see how to get in touch if it’s possible…
And I mean the frame that can still roll around I would take off the body and I already have engine and trans out it’s just my project I’m a mechanic but I don’t weld or fabricate so this video caught my attention I would transport it to you..
Exceptional product. Excellent video. Great content. The best of TH-cam. Like, Share, subscribe. Promote and engage. Outstanding review. Recommend. Gold. Tremendous entertainment. Economy motivational AI Chess Military Frugal Documentary high quality backlinks captivating gaming beast
This homie is living the life. With oldies going in the back
Gots to keep the mind straight 🤣
How much to reinforce a whole frame for 64 ?
BAD ASS WORK HOMEBOY. THANKS FOR SHOWING US THE WORK OF TALENT. 💪🏽👏🏽👍🏽🙏🏽
Thank you
Man your work is so clean always a beautiful job looking forward to seeing what you’re up to next
Thank You 💪
Nice looking welds.
this is sick! can you do a video of how you do the pockets and inside where the donuts go?? for a gbody
True craftsmanship ,nice job brother
Thank You 👍👍
Thank You 💪
Clean clean clean
Bad ass work!
Thank You 👍👍👍
You do really good work! Where is your shop? I'm in Sacramento.
What thickness is that on the outer arches and the main rails?
What method do you use to bend your parts? A rosebud on a torch and heat it up till you can hammer it with a mallet? Nice work homey. I’m stuck out here in Jersey building my 82 Monte with no help or guidance because no one wants to give up info not even the shops that I bought parts and kits from smh. TH-cam is my only resource at this point, so I appreciate you showing all this.
3/16" on arches 1/4" on rails
🔥🔥🔥CAM- MOAN !!!💯
💯
You get down homie how much does this run and did you reinforce it so much becuase it's a hopper frame?
What’s up with the bridge to axle alignment ?? It doesn’t need to be straight up and down ?
I have a 1995 big body Cadillac Fleetwood want to Put in a lay n play a six battery two pump set up how much reinforcement do you think I need
I have a 63 frame I want to use on my 1964, I'm not ready for hydrolics yet but I want to do the frame first...I want it to be strong enough to handle as crazy as I want to go...
I would like a rough estimate to do my frame like that...?
How do I get in contact directly with you to get a time frame, deposit amount, etc.?
Wats up man good work I’ve been watching your videos but how do we get estimates I have my 83 regal I’m working on the engine I was thinking of taking just the frame to someone to reinforce and make it hydraulic ready nothing big or show just reinforced for family cruising, 3 wheel and maybe now and then a small hop to show off you know what I mean… mostly family fun cruiser. But yea I don’t see how to get in touch if it’s possible…
And I mean the frame that can still roll around I would take off the body and I already have engine and trans out it’s just my project I’m a mechanic but I don’t weld or fabricate so this video caught my attention I would transport it to you..
I need some work done on my lowrider homie but im in El Paso tx
My O.G. Homie a hotshot driver stays in Fort Worth Texas. He can provide transportation not a problem.
Nice.. Question.. Is a 3 sided frame wrap sale for 3 wheel and some hop in a 63 impala? Asking cus my buddy got a car which is 3 sided reinforce
Yes you can play with it
@@nolimitfabricationwelowrid159Thank u for replying man..
@@nolimitfabricationwelowrid159is all reinforcement good or it gota be a specific thickness to it
How much reinforcement does my frame need on a78 tbird only 3 pumps 4 batteries. Looking for baby hop and 3 wheel
4 corners & front face belly
If I have a lay n play setup do I need to reinforce the arches or stress points ?
4 corners to protect the frame
Koo thxs
Is that 1/4 inch or 3/16th thick plate and is 3/16th plate suitable for reinforcement??
Frame is 3/16" plated
Bessey C-Clamps Are King the Big Dogg Ones For Applying metal to frame.
@@nolimitfabricationwelowrid159 thanks 😊
Looks bad ass. Nice work 👍
How did you make your templates
Box or thick ass drawling paper
Press up against frame with baby c clamps then trace out with a marker
@@nolimitfabricationwelowrid159 nice. Your plates and welds look crispy clean
@@hosscaddy thank you. Been fabricating for 17 years fuckin over it 🤣🤣🤣🤣
How can i reach you
How much you'll charge me to do my frame on a 84 Cutlass
Exceptional product. Excellent video. Great content. The best of TH-cam. Like, Share, subscribe. Promote and engage. Outstanding review. Recommend. Gold. Tremendous entertainment. Economy motivational AI Chess Military Frugal Documentary high quality backlinks captivating gaming beast